| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
regulator: stm32-pwr: fix of_iomap leak
Smatch reports:
drivers/regulator/stm32-pwr.c:166 stm32_pwr_regulator_probe() warn:
'base' from of_iomap() not released on lines: 151,166.
In stm32_pwr_regulator_probe(), base is not released
when devm_kzalloc() fails to allocate memory or
devm_regulator_register() fails to register a new regulator device,
which may cause a leak.
To fix this issue, replace of_iomap() with
devm_platform_ioremap_resource(). devm_platform_ioremap_resource()
is a specialized function for platform devices.
It allows 'base' to be automatically released whether the probe
function succeeds or fails.
Besides, use IS_ERR(base) instead of !base
as the return value of devm_platform_ioremap_resource()
can either be a pointer to the remapped memory or
an ERR_PTR() encoded error code if the operation fails. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915/gvt: fix gvt debugfs destroy
When gvt debug fs is destroyed, need to have a sane check if drm
minor's debugfs root is still available or not, otherwise in case like
device remove through unbinding, drm minor's debugfs directory has
already been removed, then intel_gvt_debugfs_clean() would act upon
dangling pointer like below oops.
i915 0000:00:02.0: Direct firmware load for i915/gvt/vid_0x8086_did_0x1926_rid_0x0a.golden_hw_state failed with error -2
i915 0000:00:02.0: MDEV: Registered
Console: switching to colour dummy device 80x25
i915 0000:00:02.0: MDEV: Unregistering
BUG: kernel NULL pointer dereference, address: 00000000000000a0
PGD 0 P4D 0
Oops: 0002 [#1] PREEMPT SMP PTI
CPU: 2 PID: 2486 Comm: gfx-unbind.sh Tainted: G I 6.1.0-rc8+ #15
Hardware name: Dell Inc. XPS 13 9350/0JXC1H, BIOS 1.13.0 02/10/2020
RIP: 0010:down_write+0x1f/0x90
Code: 1d ff ff 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 53 48 89 fb e8 62 c0 ff ff bf 01 00 00 00 e8 28 5e 31 ff 31 c0 ba 01 00 00 00 <f0> 48 0f b1 13 75 33 65 48 8b 04 25 c0 bd 01 00 48 89 43 08 bf 01
RSP: 0018:ffff9eb3036ffcc8 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 00000000000000a0 RCX: ffffff8100000000
RDX: 0000000000000001 RSI: 0000000000000064 RDI: ffffffffa48787a8
RBP: ffff9eb3036ffd30 R08: ffffeb1fc45a0608 R09: ffffeb1fc45a05c0
R10: 0000000000000002 R11: 0000000000000000 R12: 0000000000000000
R13: ffff91acc33fa328 R14: ffff91acc033f080 R15: ffff91acced533e0
FS: 00007f6947bba740(0000) GS:ffff91ae36d00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000000a0 CR3: 00000001133a2002 CR4: 00000000003706e0
Call Trace:
<TASK>
simple_recursive_removal+0x9f/0x2a0
? start_creating.part.0+0x120/0x120
? _raw_spin_lock+0x13/0x40
debugfs_remove+0x40/0x60
intel_gvt_debugfs_clean+0x15/0x30 [kvmgt]
intel_gvt_clean_device+0x49/0xe0 [kvmgt]
intel_gvt_driver_remove+0x2f/0xb0
i915_driver_remove+0xa4/0xf0
i915_pci_remove+0x1a/0x30
pci_device_remove+0x33/0xa0
device_release_driver_internal+0x1b2/0x230
unbind_store+0xe0/0x110
kernfs_fop_write_iter+0x11b/0x1f0
vfs_write+0x203/0x3d0
ksys_write+0x63/0xe0
do_syscall_64+0x37/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f6947cb5190
Code: 40 00 48 8b 15 71 9c 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 80 3d 51 24 0e 00 00 74 17 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 48 83 ec 28 48 89
RSP: 002b:00007ffcbac45a28 EFLAGS: 00000202 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 000000000000000d RCX: 00007f6947cb5190
RDX: 000000000000000d RSI: 0000555e35c866a0 RDI: 0000000000000001
RBP: 0000555e35c866a0 R08: 0000000000000002 R09: 0000555e358cb97c
R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000001
R13: 000000000000000d R14: 0000000000000000 R15: 0000555e358cb8e0
</TASK>
Modules linked in: kvmgt
CR2: 00000000000000a0
---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
driver: soc: xilinx: use _safe loop iterator to avoid a use after free
The hash_for_each_possible() loop dereferences "eve_data" to get the
next item on the list. However the loop frees eve_data so it leads to
a use after free. Use hash_for_each_possible_safe() instead. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: lpfc: Prevent lpfc_debugfs_lockstat_write() buffer overflow
A static code analysis tool flagged the possibility of buffer overflow when
using copy_from_user() for a debugfs entry.
Currently, it is possible that copy_from_user() copies more bytes than what
would fit in the mybuf char array. Add a min() restriction check between
sizeof(mybuf) - 1 and nbytes passed from the userspace buffer to protect
against buffer overflow. |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: rawnand: fsl_upm: Fix an off-by one test in fun_exec_op()
'op-cs' is copied in 'fun->mchip_number' which is used to access the
'mchip_offsets' and the 'rnb_gpio' arrays.
These arrays have NAND_MAX_CHIPS elements, so the index must be below this
limit.
Fix the sanity check in order to avoid the NAND_MAX_CHIPS value. This
would lead to out-of-bound accesses. |
| In the Linux kernel, the following vulnerability has been resolved:
can: isotp: check CAN address family in isotp_bind()
Add missing check to block non-AF_CAN binds.
Syzbot created some code which matched the right sockaddr struct size
but used AF_XDP (0x2C) instead of AF_CAN (0x1D) in the address family
field:
bind$xdp(r2, &(0x7f0000000540)={0x2c, 0x0, r4, 0x0, r2}, 0x10)
^^^^
This has no funtional impact but the userspace should be notified about
the wrong address family field content. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Fix DMA-API call trace on NVMe LS requests
The following message and call trace was seen with debug kernels:
DMA-API: qla2xxx 0000:41:00.0: device driver failed to check map
error [device address=0x00000002a3ff38d8] [size=1024 bytes] [mapped as
single]
WARNING: CPU: 0 PID: 2930 at kernel/dma/debug.c:1017
check_unmap+0xf42/0x1990
Call Trace:
debug_dma_unmap_page+0xc9/0x100
qla_nvme_ls_unmap+0x141/0x210 [qla2xxx]
Remove DMA mapping from the driver altogether, as it is already done by FC
layer. This prevents the warning. |
| In the Linux kernel, the following vulnerability has been resolved:
media: rcar_fdp1: Fix refcount leak in probe and remove function
rcar_fcp_get() take reference, which should be balanced with
rcar_fcp_put(). Add missing rcar_fcp_put() in fdp1_remove and
the error paths of fdp1_probe() to fix this.
[hverkuil: resolve merge conflict, remove() is now void] |
| In the Linux kernel, the following vulnerability has been resolved:
usb: rndis_host: Secure rndis_query check against int overflow
Variables off and len typed as uint32 in rndis_query function
are controlled by incoming RNDIS response message thus their
value may be manipulated. Setting off to a unexpectetly large
value will cause the sum with len and 8 to overflow and pass
the implemented validation step. Consequently the response
pointer will be referring to a location past the expected
buffer boundaries allowing information leakage e.g. via
RNDIS_OID_802_3_PERMANENT_ADDRESS OID. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing/user_events: Ensure write index cannot be negative
The write index indicates which event the data is for and accesses a
per-file array. The index is passed by user processes during write()
calls as the first 4 bytes. Ensure that it cannot be negative by
returning -EINVAL to prevent out of bounds accesses.
Update ftrace self-test to ensure this occurs properly. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: Return error for inconsistent extended attributes
ntfs_read_ea is called when we want to read extended attributes. There
are some sanity checks for the validity of the EAs. However, it fails to
return a proper error code for the inconsistent attributes, which might
lead to unpredicted memory accesses after return.
[ 138.916927] BUG: KASAN: use-after-free in ntfs_set_ea+0x453/0xbf0
[ 138.923876] Write of size 4 at addr ffff88800205cfac by task poc/199
[ 138.931132]
[ 138.933016] CPU: 0 PID: 199 Comm: poc Not tainted 6.2.0-rc1+ #4
[ 138.938070] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
[ 138.947327] Call Trace:
[ 138.949557] <TASK>
[ 138.951539] dump_stack_lvl+0x4d/0x67
[ 138.956834] print_report+0x16f/0x4a6
[ 138.960798] ? ntfs_set_ea+0x453/0xbf0
[ 138.964437] ? kasan_complete_mode_report_info+0x7d/0x200
[ 138.969793] ? ntfs_set_ea+0x453/0xbf0
[ 138.973523] kasan_report+0xb8/0x140
[ 138.976740] ? ntfs_set_ea+0x453/0xbf0
[ 138.980578] __asan_store4+0x76/0xa0
[ 138.984669] ntfs_set_ea+0x453/0xbf0
[ 138.988115] ? __pfx_ntfs_set_ea+0x10/0x10
[ 138.993390] ? kernel_text_address+0xd3/0xe0
[ 138.998270] ? __kernel_text_address+0x16/0x50
[ 139.002121] ? unwind_get_return_address+0x3e/0x60
[ 139.005659] ? __pfx_stack_trace_consume_entry+0x10/0x10
[ 139.010177] ? arch_stack_walk+0xa2/0x100
[ 139.013657] ? filter_irq_stacks+0x27/0x80
[ 139.017018] ntfs_setxattr+0x405/0x440
[ 139.022151] ? __pfx_ntfs_setxattr+0x10/0x10
[ 139.026569] ? kvmalloc_node+0x2d/0x120
[ 139.030329] ? kasan_save_stack+0x41/0x60
[ 139.033883] ? kasan_save_stack+0x2a/0x60
[ 139.037338] ? kasan_set_track+0x29/0x40
[ 139.040163] ? kasan_save_alloc_info+0x1f/0x30
[ 139.043588] ? __kasan_kmalloc+0x8b/0xa0
[ 139.047255] ? __kmalloc_node+0x68/0x150
[ 139.051264] ? kvmalloc_node+0x2d/0x120
[ 139.055301] ? vmemdup_user+0x2b/0xa0
[ 139.058584] __vfs_setxattr+0x121/0x170
[ 139.062617] ? __pfx___vfs_setxattr+0x10/0x10
[ 139.066282] __vfs_setxattr_noperm+0x97/0x300
[ 139.070061] __vfs_setxattr_locked+0x145/0x170
[ 139.073580] vfs_setxattr+0x137/0x2a0
[ 139.076641] ? __pfx_vfs_setxattr+0x10/0x10
[ 139.080223] ? __kasan_check_write+0x18/0x20
[ 139.084234] do_setxattr+0xce/0x150
[ 139.087768] setxattr+0x126/0x140
[ 139.091250] ? __pfx_setxattr+0x10/0x10
[ 139.094948] ? __virt_addr_valid+0xcb/0x140
[ 139.097838] ? __call_rcu_common.constprop.0+0x1c7/0x330
[ 139.102688] ? debug_smp_processor_id+0x1b/0x30
[ 139.105985] ? kasan_quarantine_put+0x5b/0x190
[ 139.109980] ? putname+0x84/0xa0
[ 139.113886] ? __kasan_slab_free+0x11e/0x1b0
[ 139.117961] ? putname+0x84/0xa0
[ 139.121316] ? preempt_count_sub+0x1c/0xd0
[ 139.124427] ? __mnt_want_write+0xae/0x100
[ 139.127836] ? mnt_want_write+0x8f/0x150
[ 139.130954] path_setxattr+0x164/0x180
[ 139.133998] ? __pfx_path_setxattr+0x10/0x10
[ 139.137853] ? __pfx_ksys_pwrite64+0x10/0x10
[ 139.141299] ? debug_smp_processor_id+0x1b/0x30
[ 139.145714] ? fpregs_assert_state_consistent+0x6b/0x80
[ 139.150796] __x64_sys_setxattr+0x71/0x90
[ 139.155407] do_syscall_64+0x3f/0x90
[ 139.159035] entry_SYSCALL_64_after_hwframe+0x72/0xdc
[ 139.163843] RIP: 0033:0x7f108cae4469
[ 139.166481] Code: 00 f3 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 088
[ 139.183764] RSP: 002b:00007fff87588388 EFLAGS: 00000286 ORIG_RAX: 00000000000000bc
[ 139.190657] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f108cae4469
[ 139.196586] RDX: 00007fff875883b0 RSI: 00007fff875883d1 RDI: 00007fff875883b6
[ 139.201716] RBP: 00007fff8758c530 R08: 0000000000000001 R09: 00007fff8758c618
[ 139.207940] R10: 0000000000000006 R11: 0000000000000286 R12: 00000000004004c0
[ 139.214007] R13: 00007fff8758c610 R14: 0000000000000000 R15
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
fs/jfs: prevent double-free in dbUnmount() after failed jfs_remount()
Syzkaller reported the following issue:
==================================================================
BUG: KASAN: double-free in slab_free mm/slub.c:3787 [inline]
BUG: KASAN: double-free in __kmem_cache_free+0x71/0x110 mm/slub.c:3800
Free of addr ffff888086408000 by task syz-executor.4/12750
[...]
Call Trace:
<TASK>
[...]
kasan_report_invalid_free+0xac/0xd0 mm/kasan/report.c:482
____kasan_slab_free+0xfb/0x120
kasan_slab_free include/linux/kasan.h:177 [inline]
slab_free_hook mm/slub.c:1781 [inline]
slab_free_freelist_hook+0x12e/0x1a0 mm/slub.c:1807
slab_free mm/slub.c:3787 [inline]
__kmem_cache_free+0x71/0x110 mm/slub.c:3800
dbUnmount+0xf4/0x110 fs/jfs/jfs_dmap.c:264
jfs_umount+0x248/0x3b0 fs/jfs/jfs_umount.c:87
jfs_put_super+0x86/0x190 fs/jfs/super.c:194
generic_shutdown_super+0x130/0x310 fs/super.c:492
kill_block_super+0x79/0xd0 fs/super.c:1386
deactivate_locked_super+0xa7/0xf0 fs/super.c:332
cleanup_mnt+0x494/0x520 fs/namespace.c:1291
task_work_run+0x243/0x300 kernel/task_work.c:179
resume_user_mode_work include/linux/resume_user_mode.h:49 [inline]
exit_to_user_mode_loop+0x124/0x150 kernel/entry/common.c:171
exit_to_user_mode_prepare+0xb2/0x140 kernel/entry/common.c:203
__syscall_exit_to_user_mode_work kernel/entry/common.c:285 [inline]
syscall_exit_to_user_mode+0x26/0x60 kernel/entry/common.c:296
do_syscall_64+0x49/0xb0 arch/x86/entry/common.c:86
entry_SYSCALL_64_after_hwframe+0x63/0xcd
[...]
</TASK>
Allocated by task 13352:
kasan_save_stack mm/kasan/common.c:45 [inline]
kasan_set_track+0x3d/0x60 mm/kasan/common.c:52
____kasan_kmalloc mm/kasan/common.c:371 [inline]
__kasan_kmalloc+0x97/0xb0 mm/kasan/common.c:380
kmalloc include/linux/slab.h:580 [inline]
dbMount+0x54/0x980 fs/jfs/jfs_dmap.c:164
jfs_mount+0x1dd/0x830 fs/jfs/jfs_mount.c:121
jfs_fill_super+0x590/0xc50 fs/jfs/super.c:556
mount_bdev+0x26c/0x3a0 fs/super.c:1359
legacy_get_tree+0xea/0x180 fs/fs_context.c:610
vfs_get_tree+0x88/0x270 fs/super.c:1489
do_new_mount+0x289/0xad0 fs/namespace.c:3145
do_mount fs/namespace.c:3488 [inline]
__do_sys_mount fs/namespace.c:3697 [inline]
__se_sys_mount+0x2d3/0x3c0 fs/namespace.c:3674
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Freed by task 13352:
kasan_save_stack mm/kasan/common.c:45 [inline]
kasan_set_track+0x3d/0x60 mm/kasan/common.c:52
kasan_save_free_info+0x27/0x40 mm/kasan/generic.c:518
____kasan_slab_free+0xd6/0x120 mm/kasan/common.c:236
kasan_slab_free include/linux/kasan.h:177 [inline]
slab_free_hook mm/slub.c:1781 [inline]
slab_free_freelist_hook+0x12e/0x1a0 mm/slub.c:1807
slab_free mm/slub.c:3787 [inline]
__kmem_cache_free+0x71/0x110 mm/slub.c:3800
dbUnmount+0xf4/0x110 fs/jfs/jfs_dmap.c:264
jfs_mount_rw+0x545/0x740 fs/jfs/jfs_mount.c:247
jfs_remount+0x3db/0x710 fs/jfs/super.c:454
reconfigure_super+0x3bc/0x7b0 fs/super.c:935
vfs_fsconfig_locked fs/fsopen.c:254 [inline]
__do_sys_fsconfig fs/fsopen.c:439 [inline]
__se_sys_fsconfig+0xad5/0x1060 fs/fsopen.c:314
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
[...]
JFS_SBI(ipbmap->i_sb)->bmap wasn't set to NULL after kfree() in
dbUnmount().
Syzkaller uses faultinject to reproduce this KASAN double-free
warning. The issue is triggered if either diMount() or dbMount() fail
in jfs_remount(), since diUnmount() or dbUnmount() already happened in
such a case - they will do double-free on next execution: jfs_umount
or jfs_remount.
Tested on both upstream and jfs-next by syzkaller. |
| In the Linux kernel, the following vulnerability has been resolved:
hfs/hfsplus: avoid WARN_ON() for sanity check, use proper error handling
Commit 55d1cbbbb29e ("hfs/hfsplus: use WARN_ON for sanity check") fixed
a build warning by turning a comment into a WARN_ON(), but it turns out
that syzbot then complains because it can trigger said warning with a
corrupted hfs image.
The warning actually does warn about a bad situation, but we are much
better off just handling it as the error it is. So rather than warn
about us doing bad things, stop doing the bad things and return -EIO.
While at it, also fix a memory leak that was introduced by an earlier
fix for a similar syzbot warning situation, and add a check for one case
that historically wasn't handled at all (ie neither comment nor
subsequent WARN_ON). |
| In the Linux kernel, the following vulnerability has been resolved:
autofs: fix memory leak of waitqueues in autofs_catatonic_mode
Syzkaller reports a memory leak:
BUG: memory leak
unreferenced object 0xffff88810b279e00 (size 96):
comm "syz-executor399", pid 3631, jiffies 4294964921 (age 23.870s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 08 9e 27 0b 81 88 ff ff ..........'.....
08 9e 27 0b 81 88 ff ff 00 00 00 00 00 00 00 00 ..'.............
backtrace:
[<ffffffff814cfc90>] kmalloc_trace+0x20/0x90 mm/slab_common.c:1046
[<ffffffff81bb75ca>] kmalloc include/linux/slab.h:576 [inline]
[<ffffffff81bb75ca>] autofs_wait+0x3fa/0x9a0 fs/autofs/waitq.c:378
[<ffffffff81bb88a7>] autofs_do_expire_multi+0xa7/0x3e0 fs/autofs/expire.c:593
[<ffffffff81bb8c33>] autofs_expire_multi+0x53/0x80 fs/autofs/expire.c:619
[<ffffffff81bb6972>] autofs_root_ioctl_unlocked+0x322/0x3b0 fs/autofs/root.c:897
[<ffffffff81bb6a95>] autofs_root_ioctl+0x25/0x30 fs/autofs/root.c:910
[<ffffffff81602a9c>] vfs_ioctl fs/ioctl.c:51 [inline]
[<ffffffff81602a9c>] __do_sys_ioctl fs/ioctl.c:870 [inline]
[<ffffffff81602a9c>] __se_sys_ioctl fs/ioctl.c:856 [inline]
[<ffffffff81602a9c>] __x64_sys_ioctl+0xfc/0x140 fs/ioctl.c:856
[<ffffffff84608225>] do_syscall_x64 arch/x86/entry/common.c:50 [inline]
[<ffffffff84608225>] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
[<ffffffff84800087>] entry_SYSCALL_64_after_hwframe+0x63/0xcd
autofs_wait_queue structs should be freed if their wait_ctr becomes zero.
Otherwise they will be lost.
In this case an AUTOFS_IOC_EXPIRE_MULTI ioctl is done, then a new
waitqueue struct is allocated in autofs_wait(), its initial wait_ctr
equals 2. After that wait_event_killable() is interrupted (it returns
-ERESTARTSYS), so that 'wq->name.name == NULL' condition may be not
satisfied. Actually, this condition can be satisfied when
autofs_wait_release() or autofs_catatonic_mode() is called and, what is
also important, wait_ctr is decremented in those places. Upon the exit of
autofs_wait(), wait_ctr is decremented to 1. Then the unmounting process
begins: kill_sb calls autofs_catatonic_mode(), which should have freed the
waitqueues, but it only decrements its usage counter to zero which is not
a correct behaviour.
edit:imk
This description is of course not correct. The umount performed as a result
of an expire is a umount of a mount that has been automounted, it's not the
autofs mount itself. They happen independently, usually after everything
mounted within the autofs file system has been expired away. If everything
hasn't been expired away the automount daemon can still exit leaving mounts
in place. But expires done in both cases will result in a notification that
calls autofs_wait_release() with a result status. The problem case is the
summary execution of of the automount daemon. In this case any waiting
processes won't be woken up until either they are terminated or the mount
is umounted.
end edit: imk
So in catatonic mode we should free waitqueues which counter becomes zero.
edit: imk
Initially I was concerned that the calling of autofs_wait_release() and
autofs_catatonic_mode() was not mutually exclusive but that can't be the
case (obviously) because the queue entry (or entries) is removed from the
list when either of these two functions are called. Consequently the wait
entry will be freed by only one of these functions or by the woken process
in autofs_wait() depending on the order of the calls.
end edit: imk |
| In the Linux kernel, the following vulnerability has been resolved:
serial: sprd: Fix DMA buffer leak issue
Release DMA buffer when _probe() returns failure to avoid memory leak. |
| In the Linux kernel, the following vulnerability has been resolved:
gtp: Fix use-after-free in __gtp_encap_destroy().
syzkaller reported use-after-free in __gtp_encap_destroy(). [0]
It shows the same process freed sk and touched it illegally.
Commit e198987e7dd7 ("gtp: fix suspicious RCU usage") added lock_sock()
and release_sock() in __gtp_encap_destroy() to protect sk->sk_user_data,
but release_sock() is called after sock_put() releases the last refcnt.
[0]:
BUG: KASAN: slab-use-after-free in instrument_atomic_read_write include/linux/instrumented.h:96 [inline]
BUG: KASAN: slab-use-after-free in atomic_try_cmpxchg_acquire include/linux/atomic/atomic-instrumented.h:541 [inline]
BUG: KASAN: slab-use-after-free in queued_spin_lock include/asm-generic/qspinlock.h:111 [inline]
BUG: KASAN: slab-use-after-free in do_raw_spin_lock include/linux/spinlock.h:186 [inline]
BUG: KASAN: slab-use-after-free in __raw_spin_lock_bh include/linux/spinlock_api_smp.h:127 [inline]
BUG: KASAN: slab-use-after-free in _raw_spin_lock_bh+0x75/0xe0 kernel/locking/spinlock.c:178
Write of size 4 at addr ffff88800dbef398 by task syz-executor.2/2401
CPU: 1 PID: 2401 Comm: syz-executor.2 Not tainted 6.4.0-rc5-01219-gfa0e21fa4443 #2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x72/0xa0 lib/dump_stack.c:106
print_address_description mm/kasan/report.c:351 [inline]
print_report+0xcc/0x620 mm/kasan/report.c:462
kasan_report+0xb2/0xe0 mm/kasan/report.c:572
check_region_inline mm/kasan/generic.c:181 [inline]
kasan_check_range+0x39/0x1c0 mm/kasan/generic.c:187
instrument_atomic_read_write include/linux/instrumented.h:96 [inline]
atomic_try_cmpxchg_acquire include/linux/atomic/atomic-instrumented.h:541 [inline]
queued_spin_lock include/asm-generic/qspinlock.h:111 [inline]
do_raw_spin_lock include/linux/spinlock.h:186 [inline]
__raw_spin_lock_bh include/linux/spinlock_api_smp.h:127 [inline]
_raw_spin_lock_bh+0x75/0xe0 kernel/locking/spinlock.c:178
spin_lock_bh include/linux/spinlock.h:355 [inline]
release_sock+0x1f/0x1a0 net/core/sock.c:3526
gtp_encap_disable_sock drivers/net/gtp.c:651 [inline]
gtp_encap_disable+0xb9/0x220 drivers/net/gtp.c:664
gtp_dev_uninit+0x19/0x50 drivers/net/gtp.c:728
unregister_netdevice_many_notify+0x97e/0x1520 net/core/dev.c:10841
rtnl_delete_link net/core/rtnetlink.c:3216 [inline]
rtnl_dellink+0x3c0/0xb30 net/core/rtnetlink.c:3268
rtnetlink_rcv_msg+0x450/0xb10 net/core/rtnetlink.c:6423
netlink_rcv_skb+0x15d/0x450 net/netlink/af_netlink.c:2548
netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline]
netlink_unicast+0x700/0x930 net/netlink/af_netlink.c:1365
netlink_sendmsg+0x91c/0xe30 net/netlink/af_netlink.c:1913
sock_sendmsg_nosec net/socket.c:724 [inline]
sock_sendmsg+0x1b7/0x200 net/socket.c:747
____sys_sendmsg+0x75a/0x990 net/socket.c:2493
___sys_sendmsg+0x11d/0x1c0 net/socket.c:2547
__sys_sendmsg+0xfe/0x1d0 net/socket.c:2576
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3f/0x90 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x72/0xdc
RIP: 0033:0x7f1168b1fe5d
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 73 9f 1b 00 f7 d8 64 89 01 48
RSP: 002b:00007f1167edccc8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00000000004bbf80 RCX: 00007f1168b1fe5d
RDX: 0000000000000000 RSI: 00000000200002c0 RDI: 0000000000000003
RBP: 00000000004bbf80 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 000000000000000b R14: 00007f1168b80530 R15: 0000000000000000
</TASK>
Allocated by task 1483:
kasan_save_stack+0x22/0x50 mm/kasan/common.c:45
kasan_set_track+0x25/0x30 mm/kasan/common.c:52
__kasan_slab_alloc+0x
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
media: mediatek: vcodec: fix resource leaks in vdec_msg_queue_init()
If we encounter any error in the vdec_msg_queue_init() then we need
to set "msg_queue->wdma_addr.size = 0;". Normally, this is done
inside the vdec_msg_queue_deinit() function. However, if the
first call to allocate &msg_queue->wdma_addr fails, then the
vdec_msg_queue_deinit() function is a no-op. For that situation, just
set the size to zero explicitly and return.
There were two other error paths which did not clean up before returning.
Change those error paths to goto mem_alloc_err. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/kexec: Fix double-free of elf header buffer
After
b3e34a47f989 ("x86/kexec: fix memory leak of elf header buffer"),
freeing image->elf_headers in the error path of crash_load_segments()
is not needed because kimage_file_post_load_cleanup() will take
care of that later. And not clearing it could result in a double-free.
Drop the superfluous vfree() call at the error path of
crash_load_segments(). |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Move representor neigh cleanup to profile cleanup_tx
For IP tunnel encapsulation in ECMP (Equal-Cost Multipath) mode, as
the flow is duplicated to the peer eswitch, the related neighbour
information on the peer uplink representor is created as well.
In the cited commit, eswitch devcom unpair is moved to uplink unload
API, specifically the profile->cleanup_tx. If there is a encap rule
offloaded in ECMP mode, when one eswitch does unpair (because of
unloading the driver, for instance), and the peer rule from the peer
eswitch is going to be deleted, the use-after-free error is triggered
while accessing neigh info, as it is already cleaned up in uplink's
profile->disable, which is before its profile->cleanup_tx.
To fix this issue, move the neigh cleanup to profile's cleanup_tx
callback, and after mlx5e_cleanup_uplink_rep_tx is called. The neigh
init is moved to init_tx for symmeter.
[ 2453.376299] BUG: KASAN: slab-use-after-free in mlx5e_rep_neigh_entry_release+0x109/0x3a0 [mlx5_core]
[ 2453.379125] Read of size 4 at addr ffff888127af9008 by task modprobe/2496
[ 2453.381542] CPU: 7 PID: 2496 Comm: modprobe Tainted: G B 6.4.0-rc7+ #15
[ 2453.383386] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[ 2453.384335] Call Trace:
[ 2453.384625] <TASK>
[ 2453.384891] dump_stack_lvl+0x33/0x50
[ 2453.385285] print_report+0xc2/0x610
[ 2453.385667] ? __virt_addr_valid+0xb1/0x130
[ 2453.386091] ? mlx5e_rep_neigh_entry_release+0x109/0x3a0 [mlx5_core]
[ 2453.386757] kasan_report+0xae/0xe0
[ 2453.387123] ? mlx5e_rep_neigh_entry_release+0x109/0x3a0 [mlx5_core]
[ 2453.387798] mlx5e_rep_neigh_entry_release+0x109/0x3a0 [mlx5_core]
[ 2453.388465] mlx5e_rep_encap_entry_detach+0xa6/0xe0 [mlx5_core]
[ 2453.389111] mlx5e_encap_dealloc+0xa7/0x100 [mlx5_core]
[ 2453.389706] mlx5e_tc_tun_encap_dests_unset+0x61/0xb0 [mlx5_core]
[ 2453.390361] mlx5_free_flow_attr_actions+0x11e/0x340 [mlx5_core]
[ 2453.391015] ? complete_all+0x43/0xd0
[ 2453.391398] ? free_flow_post_acts+0x38/0x120 [mlx5_core]
[ 2453.392004] mlx5e_tc_del_fdb_flow+0x4ae/0x690 [mlx5_core]
[ 2453.392618] mlx5e_tc_del_fdb_peers_flow+0x308/0x370 [mlx5_core]
[ 2453.393276] mlx5e_tc_clean_fdb_peer_flows+0xf5/0x140 [mlx5_core]
[ 2453.393925] mlx5_esw_offloads_unpair+0x86/0x540 [mlx5_core]
[ 2453.394546] ? mlx5_esw_offloads_set_ns_peer.isra.0+0x180/0x180 [mlx5_core]
[ 2453.395268] ? down_write+0xaa/0x100
[ 2453.395652] mlx5_esw_offloads_devcom_event+0x203/0x530 [mlx5_core]
[ 2453.396317] mlx5_devcom_send_event+0xbb/0x190 [mlx5_core]
[ 2453.396917] mlx5_esw_offloads_devcom_cleanup+0xb0/0xd0 [mlx5_core]
[ 2453.397582] mlx5e_tc_esw_cleanup+0x42/0x120 [mlx5_core]
[ 2453.398182] mlx5e_rep_tc_cleanup+0x15/0x30 [mlx5_core]
[ 2453.398768] mlx5e_cleanup_rep_tx+0x6c/0x80 [mlx5_core]
[ 2453.399367] mlx5e_detach_netdev+0xee/0x120 [mlx5_core]
[ 2453.399957] mlx5e_netdev_change_profile+0x84/0x170 [mlx5_core]
[ 2453.400598] mlx5e_vport_rep_unload+0xe0/0xf0 [mlx5_core]
[ 2453.403781] mlx5_eswitch_unregister_vport_reps+0x15e/0x190 [mlx5_core]
[ 2453.404479] ? mlx5_eswitch_register_vport_reps+0x200/0x200 [mlx5_core]
[ 2453.405170] ? up_write+0x39/0x60
[ 2453.405529] ? kernfs_remove_by_name_ns+0xb7/0xe0
[ 2453.405985] auxiliary_bus_remove+0x2e/0x40
[ 2453.406405] device_release_driver_internal+0x243/0x2d0
[ 2453.406900] ? kobject_put+0x42/0x2d0
[ 2453.407284] bus_remove_device+0x128/0x1d0
[ 2453.407687] device_del+0x240/0x550
[ 2453.408053] ? waiting_for_supplier_show+0xe0/0xe0
[ 2453.408511] ? kobject_put+0xfa/0x2d0
[ 2453.408889] ? __kmem_cache_free+0x14d/0x280
[ 2453.409310] mlx5_rescan_drivers_locked.part.0+0xcd/0x2b0 [mlx5_core]
[ 2453.409973] mlx5_unregister_device+0x40/0x50 [mlx5_core]
[ 2453.410561] mlx5_uninit_one+0x3d/0x110 [mlx5_core]
[ 2453.411111] remove_one+0x89/0x130 [mlx5_core]
[ 24
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
net: dsa: avoid suspicious RCU usage for synced VLAN-aware MAC addresses
When using the felix driver (the only one which supports UC filtering
and MC filtering) as a DSA master for a random other DSA switch, one can
see the following stack trace when the downstream switch ports join a
VLAN-aware bridge:
=============================
WARNING: suspicious RCU usage
-----------------------------
net/8021q/vlan_core.c:238 suspicious rcu_dereference_protected() usage!
stack backtrace:
Workqueue: dsa_ordered dsa_slave_switchdev_event_work
Call trace:
lockdep_rcu_suspicious+0x170/0x210
vlan_for_each+0x8c/0x188
dsa_slave_sync_uc+0x128/0x178
__hw_addr_sync_dev+0x138/0x158
dsa_slave_set_rx_mode+0x58/0x70
__dev_set_rx_mode+0x88/0xa8
dev_uc_add+0x74/0xa0
dsa_port_bridge_host_fdb_add+0xec/0x180
dsa_slave_switchdev_event_work+0x7c/0x1c8
process_one_work+0x290/0x568
What it's saying is that vlan_for_each() expects rtnl_lock() context and
it's not getting it, when it's called from the DSA master's ndo_set_rx_mode().
The caller of that - dsa_slave_set_rx_mode() - is the slave DSA
interface's dsa_port_bridge_host_fdb_add() which comes from the deferred
dsa_slave_switchdev_event_work().
We went to great lengths to avoid the rtnl_lock() context in that call
path in commit 0faf890fc519 ("net: dsa: drop rtnl_lock from
dsa_slave_switchdev_event_work"), and calling rtnl_lock() is simply not
an option due to the possibility of deadlocking when calling
dsa_flush_workqueue() from the call paths that do hold rtnl_lock() -
basically all of them.
So, when the DSA master calls vlan_for_each() from its ndo_set_rx_mode(),
the state of the 8021q driver on this device is really not protected
from concurrent access by anything.
Looking at net/8021q/, I don't think that vlan_info->vid_list was
particularly designed with RCU traversal in mind, so introducing an RCU
read-side form of vlan_for_each() - vlan_for_each_rcu() - won't be so
easy, and it also wouldn't be exactly what we need anyway.
In general I believe that the solution isn't in net/8021q/ anyway;
vlan_for_each() is not cut out for this task. DSA doesn't need rtnl_lock()
to be held per se - since it's not a netdev state change that we're
blocking, but rather, just concurrent additions/removals to a VLAN list.
We don't even need sleepable context - the callback of vlan_for_each()
just schedules deferred work.
The proposed escape is to remove the dependency on vlan_for_each() and
to open-code a non-sleepable, rtnl-free alternative to that, based on
copies of the VLAN list modified from .ndo_vlan_rx_add_vid() and
.ndo_vlan_rx_kill_vid(). |
