| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The Database for Contact Form 7, WPforms, Elementor forms WordPress plugin before 1.5.2 does not restrict the PHP classes allowed when unserializing an attacker-supplied form-field value, allowing unauthenticated users to inject arbitrary PHP objects that are instantiated when an administrator views the stored entry. This is an incomplete fix of CVE-2025-7384 and CVE-2026-2599, whose deserialization paths were hardened while the entry-editor file-field path was missed. |
| A heap buffer overflow vulnerability was found in libaom, the reference AV1 codec implementation. A flaw in the AV1 encoder's Look-Ahead Processing (LAP) mode causes the first-pass stats ring buffer wrap-around guard to be bypassed when g_lag_in_frames is set to 1 or higher. This results in a 232-byte out-of-bounds write on every encoded frame after the second, corrupting adjacent heap objects. An attacker who can influence encoder configuration in a transcoding service or WebRTC session could exploit this to cause a denial of service (process crash) or potentially achieve code execution. |
| In the Linux kernel, the following vulnerability has been resolved:
bridge: mcast: Fix a possible use-after-free when removing a bridge port
When per-VLAN multicast snooping is enabled, the bridge iterates over
all the bridge ports, disables the per-port multicast context on each
port and enables the per-{port, VLAN} multicast contexts instead. The
reverse happens when per-VLAN multicast snooping is disabled.
When global multicast snooping is enabled, the bridge iterates over all
the bridge ports and enables the per-port multicast context on each
port. The reverse happens when multicast snooping is disabled.
The above scheme can result in a situation where both types of contexts
(per-port and per-{port, VLAN}) are enabled on a single bridge port:
# ip link add name br1 up type bridge mcast_snooping 1 mcast_querier 1 vlan_filtering 1
# ip link add name dummy1 up master br1 type dummy
# ip link set dev br1 type bridge mcast_vlan_snooping 1
# ip link set dev br1 type bridge mcast_snooping 0
# ip link set dev br1 type bridge mcast_snooping 1
This is not intended and it is a problem since the commit cited below.
Prior to this commit, when removing a bridge port,
br_multicast_disable_port() would disable the per-port multicast context
and the per-{port, VLAN} multicast contexts would get disabled when
flushing VLANs.
After this commit, br_multicast_disable_port() only disables the
per-port multicast context if per-VLAN multicast snooping is disabled.
If both types of contexts were enabled on the port when it was removed,
the per-port multicast context would remain enabled when freeing the
bridge port, leading to a use-after-free [1].
Fix by preventing the bridge from enabling / disabling the per-port
multicast contexts when toggling global multicast snooping if per-VLAN
multicast snooping is enabled.
[1]
ODEBUG: free active (active state 0) object: ffff88810f8bda78 object type: timer_list hint: br_ip6_multicast_port_query_expired (net/bridge/br_multicast.c:1927)
WARNING: lib/debugobjects.c:629 at debug_print_object+0x1b1/0x3e0, CPU#5: swapper/5/0
[...]
Call Trace:
<IRQ>
__debug_check_no_obj_freed (lib/debugobjects.c:1116)
kfree (mm/slub.c:2620 mm/slub.c:6250 mm/slub.c:6565)
kobject_cleanup (lib/kobject.c:689)
rcu_do_batch (kernel/rcu/tree.c:2617)
rcu_core (kernel/rcu/tree.c:2869)
handle_softirqs (kernel/softirq.c:622)
__irq_exit_rcu (kernel/softirq.c:656 kernel/softirq.c:496 kernel/softirq.c:735)
irq_exit_rcu (kernel/softirq.c:752)
sysvec_apic_timer_interrupt (arch/x86/kernel/apic/apic.c:1061 (discriminator 47) arch/x86/kernel/apic/apic.c:1061 (discriminator 47))
</IRQ> |
| The Academy LMS WordPress plugin before 3.8.1 does not verify ownership of a user-supplied user identifier in several of its lesson AJAX handlers, allowing authenticated users with subscriber-level access to read and modify other users' lesson notes and mark other users' lesson content as completed. |
| A flaw was found in the default-groups REST endpoint and realm representation of Keycloak. This component is responsible for managing groups that are automatically assigned to new users within a realm. The issue allows a delegated administrator with realm-viewing permissions to see the names and identifiers of hidden default groups, even if they lack the specific permissions to view those groups. This can lead to the exposure of sensitive organizational structures or internal group names. |
| rust-openssl provides OpenSSL bindings for the Rust programming language. From 0.10.50 until 0.10.80, CipherCtxRef::cipher_update_inplace in openssl/src/cipher_ctx.rs incorrectly sized output buffers when used with AES key-wrap-with-padding ciphers EVP_aes_{128,192,256}_wrap_pad. For a non-multiple-of-8 input, OpenSSL writes up to 7 bytes past the end of the caller's buffer or Vec, producing attacker-controllable heap corruption when the plaintext length is attacker-influenced. This issue is fixed in version 0.10.80. |
| Path traversal on Windows in Apache MINA SSHD component sshd-git. Apache MINA SSHD is a Java library for client-side and server-side SSH.
A git server implemented with Apache MINA SSHD component sshd-git and running on Windows could allow an authenticated remote user access to git repositories outside of the configured server-side root directory. The path validation applied for CVE-2026-48827 in Apache MINA SSHD 2.18.0 and 3.0.0-M4 was partly ineffective for Servers running on Windows.
Applications are affected if they use org.apache.sshd:sshd-git to implement a git server and run on Windows. Applications not using sshd-git or not running on Windows are not affected.
Users are advised to upgrade affected applications to Apache MINA SSHD 2.19.0, which fixes the issue.
The issue also is present in the pre-release milestones 3.0.0-M1 to 3.0.0-M4 for a new upcoming new major version 3.0.0. Again, applications are affected only if they use sshd-git and run on Windows. Upgrade affected applications to 3.0.0-M5. |
| The Easy Form Builder by WhiteStudio plugin for WordPress is vulnerable to Unauthenticated Privilege Escalation to Administrator in versions up to, and including, 4.0.11 This is due to the password recovery flow using the publicly-visible session identifier ('sid') as the password reset token stored in wp_emsfb_temp_links, combined with a publicly-accessible nonce refresh endpoint (Emsfb/v1/nonce/refresh) that issues valid WordPress REST nonces to unauthenticated visitors. This makes it possible for unauthenticated attackers to reset the password of any WordPress user — including administrators — by scraping the public sid from a published login form page, submitting a recovery request for any known user email via Emsfb/v1/forms/message/add, and then calling Emsfb/v1/forms/recovery/efb_set_password with the known sid to set an arbitrary new password and gain full administrator access. |
| Ninja Forms plugin version 3.14.8 and prior for WordPress Multisite contains an incorrect authorization vulnerability that allows a subsite Administrator to trigger network-wide deletion of all Ninja Forms data by exploiting a site-scoped capability check combined with unsafe multisite migration defaults. Attackers can send a crafted POST request to the admin-ajax.php endpoint with the nf_delete_all_data action and a per-site nonce to invoke migration routines that unconditionally iterate all blogs via switch_to_blog(), dropping all nf3_* tables and clearing options and transients across every subsite in the network without requiring super-admin or network-admin privileges. |
| In the Linux kernel, the following vulnerability has been resolved:
net/handshake: hand off the pinned file reference to accept_doit
handshake_req_next() removes the request from the per-net
pending list and drops hn_lock before handshake_nl_accept_doit()
reads req->hr_sk->sk_socket and dereferences sock->file (once in
FD_PREPARE() and again in get_file()). In that window a
consumer running tls_handshake_cancel() followed by sockfd_put()
(svc_sock_free) or __fput_sync() (xs_reset_transport) releases
sock->file. sock_release() then runs sock_orphan(), zeroing
sk_socket, and frees the struct socket. The accept-side code
either reads NULL through sk_socket or chases freed memory.
The submit-side sock_hold() does not prevent this. sk_refcnt
protects struct sock, but struct socket and sock->file are
independently refcounted via the file descriptor the consumer
owns. Pinning sk leaves sock and sock->file unprotected.
Retarget the accept-side dereferences at req->hr_file, which was
pinned at submit time, instead of req->hr_sk->sk_socket->file.
Pinning on its own is not sufficient: a consumer that cancels
between handshake_req_next() returning and accept_doit reaching
FD_PREPARE() takes the !remove_pending() branch in
handshake_req_cancel() and drops hr_file before the accept side
takes its own reference. Hand off an additional file reference
inside handshake_req_next(), under hn_lock, so the accept side
operates on a reference that no concurrent handshake_req_cancel()
can revoke. FD_PREPARE() consumes that handed-off reference,
either by transferring it to the new fd in fd_publish() or by
dropping it in the cleanup destructor on error; the explicit
get_file() that previously balanced FD_PREPARE() is therefore
redundant and goes away.
Update handshake_req_cancel_test2 and _test3 to simulate the
FD_PREPARE() consumption with an fput() so the kunit file-count
assertions stay balanced. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: seq: Serialize UMP output teardown with event_input
seq_ump_process_event() borrows client->out_rfile.output without
synchronizing with the first-open and last-close transition in
seq_ump_client_open() and seq_ump_client_close().
The last output unuse can therefore drop opened[STR_OUT] to zero and
release the rawmidi file while an in-flight event_input callback is still
inside snd_rawmidi_kernel_write(). That leaves the rawmidi substream
runtime exposed to teardown before the write path has taken its own
buffer reference.
Add a per-client rwlock for the event_input-visible output file. Publish
a newly opened output file under the write side, and hold the read side
from the output lookup through snd_rawmidi_kernel_write(). The last
output close copies and clears the visible output file under the write
side, then drops the lock and releases the saved rawmidi file. Use
IRQ-safe rwlock guards because event_input can also be reached from
atomic sequencer delivery.
The buggy scenario involves two paths, with each column showing the
order within that path:
path A label: event_input path path B label: last unuse path
1. seq_ump_process_event() reads 1. seq_ump_client_close()
client->out_rfile.output. drops opened[STR_OUT] to zero.
2. snd_rawmidi_kernel_write1() 2. snd_rawmidi_kernel_release()
has not yet pinned runtime. closes the output file.
3. The writer continues using 3. close_substream() frees
the borrowed substream. substream->runtime.
This keeps the output substream and runtime alive for the full
event_input write while keeping rawmidi release outside the rwlock.
KASAN reproduced this as a slab-use-after-free in
snd_rawmidi_kernel_write1(), with allocation through
seq_ump_use()/snd_seq_port_connect() and free through
seq_ump_unuse()/snd_seq_port_disconnect().
Validation reproduced this kernel report:
KASAN slab-use-after-free in snd_rawmidi_kernel_write1+0x9d/0x400
RIP: 0033:0x7f5528af837f
Read of size 8
Call trace:
dump_stack_lvl+0x73/0xb0 (?:?)
print_report+0xd1/0x650 (?:?)
srso_alias_return_thunk+0x5/0xfbef5 (?:?)
__virt_addr_valid+0x1a7/0x340 (?:?)
kasan_complete_mode_report_info+0x64/0x200 (?:?)
kasan_report+0xf7/0x130 (?:?)
snd_rawmidi_kernel_write1+0x9d/0x400 (?:?)
__asan_load8+0x82/0xb0 (?:?)
update_stack_state+0x1ef/0x2d0 (?:?)
snd_rawmidi_kernel_write+0x1a/0x20 (?:?)
seq_ump_process_event+0xd4/0x120 (sound/core/seq/seq_ump_client.c:82)
__snd_seq_deliver_single_event+0x8a/0xe0 (?:?)
snd_seq_deliver_from_ump+0x2b2/0xd60 (?:?)
lock_acquire+0x14e/0x2e0 (?:?)
find_held_lock+0x31/0x90 (?:?)
snd_seq_port_use_ptr+0xa6/0xe0 (?:?)
__kasan_check_write+0x18/0x20 (?:?)
do_raw_read_unlock+0x32/0xa0 (?:?)
_raw_read_unlock+0x26/0x50 (?:?)
snd_seq_deliver_single_event+0x45c/0x4b0 (?:?)
snd_seq_deliver_event+0x10d/0x1b0 (?:?)
snd_seq_client_enqueue_event+0x192/0x240 (?:?)
snd_seq_write+0x2cd/0x450 (?:?)
apparmor_file_permission+0x20/0x30 (?:?)
security_file_permission+0x51/0x60 (?:?)
vfs_write+0x1ce/0x850 (?:?)
__fget_files+0x12b/0x220 (?:?)
lock_release+0xc8/0x2a0 (?:?)
__rcu_read_unlock+0x74/0x2d0 (?:?)
__fget_files+0x135/0x220 (?:?)
ksys_write+0x15a/0x180 (?:?)
rcu_is_watching+0x24/0x60 (?:?)
__x64_sys_write+0x46/0x60 (?:?)
x64_sys_call+0x7d/0x20d0 (?:?)
do_syscall_64+0xc1/0x360 (arch/x86/entry/syscall_64.c:87)
entry_SYSCALL_64_after_hwframe+0x77/0x7f (?:?) |
| Out-of-bounds read via sun.misc.Unsafe in Apache Fory. When out-of-band zero-copy deserialization is used, readAlignedVarUint() can read beyond the bounds of the underlying buffer. Out-of-band zero-copy deserialization is an opt-in feature; applications that do not use it are not affected.
This issue affects Apache Fory (formerly Apache Fury): from 0.5.0 before 1.4.0. Versions before 0.11.0 were published under the Maven coordinates org.apache.fury:fury-core.
Users are recommended to upgrade to version 1.4.0, which fixes the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: mtk-snfi: unregister ECC engine on probe failure and remove() callback
mtk_snand_probe() registers the on-host NAND ECC engine, but teardown was
missing from both probe unwind and remove-time cleanup. Add a devm cleanup
action after successful registration so
nand_ecc_unregister_on_host_hw_engine() runs automatically on probe
failures and during device removal. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: fix NULL pointer bug in svm_range_set_attr
The process_info could be NULL if user doesn't call kfd_ioctl_acquire_vm
before calling kfd_ioctl_svm.
(cherry picked from commit 83a26c812e0529eb040d31a76f73e33e637243d4) |
| In the Linux kernel, the following vulnerability has been resolved:
USB: serial: cypress_m8: validate interrupt packet headers
cypress_read_int_callback() parses the interrupt-in buffer according to
the selected Cypress packet format. Format 1 has a two-byte status/count
header and format 2 has a one-byte combined status/count header. The
usb-serial core sizes the interrupt-in buffer from the endpoint
descriptor's wMaxPacketSize, and successful interrupt transfers can
complete short when URB_SHORT_NOT_OK is not set.
Check that the completed packet contains the selected header before
reading it. Malformed short reports are ignored and the interrupt URB is
resubmitted through the existing retry path, preventing out-of-bounds
header-byte reads.
KASAN report as below:
KASAN slab-out-of-bounds in cypress_read_int_callback+0x240/0x7f0
Read of size 1
Call trace:
cypress_read_int_callback() (drivers/usb/serial/cypress_m8.c:1009)
__usb_hcd_giveback_urb()
dummy_timer()
[ johan: use constants in header length sanity checks ] |
| ClearanceKit intercepts file-system access events on macOS and enforces per-process access policies. Prior to version 5.0.10, each table in the on-disk SQLite policy store (`/Library/Application Support/clearancekit/store.db`) is verified using an ECDSA signature stored in the `data_signatures` table. The signed payload contains only the canonical row content, with no version counter or freshness binding. An attacker who can write `store.db` and the matching `data_signatures` row — feasible during the opfilter-update window when the Endpoint Security filter is offline, or via offline-boot / decrypted-backup scenarios — can substitute a previously-captured legitimately-signed snapshot. opfilter accepts the older snapshot as fully valid on next boot because the existing signatures still verify. Version 5.0.10 patches the issue. |
| ClearanceKit intercepts file-system access events on macOS and enforces per-process access policies. The ECDSA private key used to sign the on-disk policy database (`/Library/Application Support/clearancekit/store.db`) is stored in the macOS System Keychain. The key was created via the two-step pattern `SecKeyCreateRandomKey` (in-memory) followed by `SecItemAdd(kSecValueRef:, kSecAttrAccess:)` (persist). Prior to version 5.0.10, for `kSecClassKey` items in the legacy System Keychain, `kSecAttrAccess` passed to `SecItemAdd` is silently ignored — the persisted key inherits no ACL restriction. The same access builder applied to `kSecClassGenericPassword` items correctly binds the ACL, making this bug specific to the EC key. The result is that any process running as root can use the key to produce valid signatures over arbitrary policy content. Version 5.0.10 fixes the issue. No known workarounds are available. Disabling the system extension and manually removing the System Keychain item labelled `clearancekit policy signing key` would prevent the forged-signature path but also disables policy enforcement. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: OOB read regression in smb_check_perm_dacl() ACE-walk loops
Commit d07b26f39246 ("ksmbd: require minimum ACE size in
smb_check_perm_dacl()") introduced a transposed bounds check:
if (offsetof(struct smb_ace, sid) + aces_size < CIFS_SID_BASE_SIZE)
Since offsetof(..sid) is 8 and CIFS_SID_BASE_SIZE is 8, this evaluates
to `aces_size < 0`. Because `aces_size` is always non-negative, this
check becomes dead code and never breaks the loop.
Worse, that commit removed the old 4-byte guard, meaning the loop now
reads `ace->size` (offset 2) even when `aces_size` is 0-3 bytes. This
re-opens a 2-byte heap out-of-bounds (OOB) read past the pntsd allocation
during subsequent SMB2_CREATE operations.
Fix this by properly transposing the comparison to require at least
16 bytes (8-byte offset + 8-byte SID base), matching the correct form
used in smb_inherit_dacl(). |
| In the Linux kernel, the following vulnerability has been resolved:
iio: chemical: scd30: fix division by zero in write_raw
Add a zero check for val2 before using it as a divisor when setting the
sampling frequency. A user writing a zero fractional part to the
sampling_frequency sysfs attribute triggers a division by zero in the
kernel. |
| Deserialization of untrusted data vulnerability that may allow class-registration checks to be bypassed during Java lambda deserialization. Only lambda capture class is affected
This issue affects Apache Fory: from before 1.4.0.
Users are recommended to upgrade to version 1.4.0, which fixes the issue. |
