| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: pcm: Disable bottom softirqs as part of spin_lock_irq() on PREEMPT_RT
snd_pcm_group_lock_irq() acquires a spinlock_t and disables interrupts
via spin_lock_irq(). This also implicitly disables the handling of
softirqs such as TIMER_SOFTIRQ.
On PREEMPT_RT softirqs are preemptible and spin_lock_irq() does not
disable them. That means a timer can be invoked during spin_lock_irq()
on the same CPU. Due to synchronisations reasons local_bh_disable() has
a per-CPU lock named softirq_ctrl.lock which synchronizes individual
softirq against each other.
syz-bot managed to trigger a lockdep report where softirq_ctrl.lock is
acquired in hrtimer_cancel() in addition to hrtimer_run_softirq(). This
is a possible deadlock.
The softirq_ctrl.lock can not be made part of spin_lock_irq() as this
would lead to too much synchronisation against individual threads on the
system. To avoid the possible deadlock, softirqs must be manually
disabled before the lock is acquired.
Disable softirqs before the lock is acquired on PREEMPT_RT. |
| In the Linux kernel, the following vulnerability has been resolved:
pwm: berlin: Fix wrong register in suspend/resume
The 'enable' register should be BERLIN_PWM_EN rather than
BERLIN_PWM_ENABLE, otherwise, the driver accesses wrong address, there
will be cpu exception then kernel panic during suspend/resume. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: uinput - zero-initialize uinput_ff_upload_compat to avoid info leak
Struct ff_effect_compat is embedded twice inside
uinput_ff_upload_compat, contains internal padding. In particular, there
is a hole after struct ff_replay to satisfy alignment requirements for
the following union member. Without clearing the structure,
copy_to_user() may leak stack data to userspace.
Initialize ff_up_compat to zero before filling valid fields. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: uas: fix urb unmapping issue when the uas device is remove during ongoing data transfer
When a UAS device is unplugged during data transfer, there is
a probability of a system panic occurring. The root cause is
an access to an invalid memory address during URB callback handling.
Specifically, this happens when the dma_direct_unmap_sg() function
is called within the usb_hcd_unmap_urb_for_dma() interface, but the
sg->dma_address field is 0 and the sg data structure has already been
freed.
The SCSI driver sends transfer commands by invoking uas_queuecommand_lck()
in uas.c, using the uas_submit_urbs() function to submit requests to USB.
Within the uas_submit_urbs() implementation, three URBs (sense_urb,
data_urb, and cmd_urb) are sequentially submitted. Device removal may
occur at any point during uas_submit_urbs execution, which may result
in URB submission failure. However, some URBs might have been successfully
submitted before the failure, and uas_submit_urbs will return the -ENODEV
error code in this case. The current error handling directly calls
scsi_done(). In the SCSI driver, this eventually triggers scsi_complete()
to invoke scsi_end_request() for releasing the sgtable. The successfully
submitted URBs, when being unlinked to giveback, call
usb_hcd_unmap_urb_for_dma() in hcd.c, leading to exceptions during sg
unmapping operations since the sg data structure has already been freed.
This patch modifies the error condition check in the uas_submit_urbs()
function. When a UAS device is removed but one or more URBs have already
been successfully submitted to USB, it avoids immediately invoking
scsi_done() and save the cmnd to devinfo->cmnd array. If the successfully
submitted URBs is completed before devinfo->resetting being set, then
the scsi_done() function will be called within uas_try_complete() after
all pending URB operations are finalized. Otherwise, the scsi_done()
function will be called within uas_zap_pending(), which is executed after
usb_kill_anchored_urbs().
The error handling only takes effect when uas_queuecommand_lck() calls
uas_submit_urbs() and returns the error value -ENODEV . In this case,
the device is disconnected, and the flow proceeds to uas_disconnect(),
where uas_zap_pending() is invoked to call uas_try_complete(). |
| In the Linux kernel, the following vulnerability has been resolved:
sunrpc: fix null pointer dereference on zero-length checksum
In xdr_stream_decode_opaque_auth(), zero-length checksum.len causes
checksum.data to be set to NULL. This triggers a NPD when accessing
checksum.data in gss_krb5_verify_mic_v2(). This patch ensures that
the value of checksum.len is not less than XDR_UNIT. |
| In the Linux kernel, the following vulnerability has been resolved:
blk-mq: fix potential deadlock while nr_requests grown
Allocate and free sched_tags while queue is freezed can deadlock[1],
this is a long term problem, hence allocate memory before freezing
queue and free memory after queue is unfreezed.
[1] https://lore.kernel.org/all/0659ea8d-a463-47c8-9180-43c719e106eb@linux.ibm.com/ |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix memory leaks when rejecting a non SINGLE data profile without an RST
At the end of btrfs_load_block_group_zone_info() the first thing we do
is to ensure that if the mapping type is not a SINGLE one and there is
no RAID stripe tree, then we return early with an error.
Doing that, though, prevents the code from running the last calls from
this function which are about freeing memory allocated during its
run. Hence, in this case, instead of returning early, we set the ret
value and fall through the rest of the cleanup code. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: hda: Fix missing pointer check in hda_component_manager_init function
The __component_match_add function may assign the 'matchptr' pointer
the value ERR_PTR(-ENOMEM), which will subsequently be dereferenced.
The call stack leading to the error looks like this:
hda_component_manager_init
|-> component_match_add
|-> component_match_add_release
|-> __component_match_add ( ... ,**matchptr, ... )
|-> *matchptr = ERR_PTR(-ENOMEM); // assign
|-> component_master_add_with_match( ... match)
|-> component_match_realloc(match, match->num); // dereference
Add IS_ERR() check to prevent the crash.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
mailbox: zynqmp-ipi: Fix SGI cleanup on unbind
The driver incorrectly determines SGI vs SPI interrupts by checking IRQ
number < 16, which fails with dynamic IRQ allocation. During unbind,
this causes improper SGI cleanup leading to kernel crash.
Add explicit irq_type field to pdata for reliable identification of SGI
interrupts (type-2) and only clean up SGI resources when appropriate. |
| In the Linux kernel, the following vulnerability has been resolved:
jfs: Verify inode mode when loading from disk
The inode mode loaded from corrupted disk can be invalid. Do like what
commit 0a9e74051313 ("isofs: Verify inode mode when loading from disk")
does. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/vt-d: Disallow dirty tracking if incoherent page walk
Dirty page tracking relies on the IOMMU atomically updating the dirty bit
in the paging-structure entry. For this operation to succeed, the paging-
structure memory must be coherent between the IOMMU and the CPU. In
another word, if the iommu page walk is incoherent, dirty page tracking
doesn't work.
The Intel VT-d specification, Section 3.10 "Snoop Behavior" states:
"Remapping hardware encountering the need to atomically update A/EA/D bits
in a paging-structure entry that is not snooped will result in a non-
recoverable fault."
To prevent an IOMMU from being incorrectly configured for dirty page
tracking when it is operating in an incoherent mode, mark SSADS as
supported only when both ecap_slads and ecap_smpwc are supported. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/fpu: Ensure XFD state on signal delivery
Sean reported [1] the following splat when running KVM tests:
WARNING: CPU: 232 PID: 15391 at xfd_validate_state+0x65/0x70
Call Trace:
<TASK>
fpu__clear_user_states+0x9c/0x100
arch_do_signal_or_restart+0x142/0x210
exit_to_user_mode_loop+0x55/0x100
do_syscall_64+0x205/0x2c0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
Chao further identified [2] a reproducible scenario involving signal
delivery: a non-AMX task is preempted by an AMX-enabled task which
modifies the XFD MSR.
When the non-AMX task resumes and reloads XSTATE with init values,
a warning is triggered due to a mismatch between fpstate::xfd and the
CPU's current XFD state. fpu__clear_user_states() does not currently
re-synchronize the XFD state after such preemption.
Invoke xfd_update_state() which detects and corrects the mismatch if
there is a dynamic feature.
This also benefits the sigreturn path, as fpu__restore_sig() may call
fpu__clear_user_states() when the sigframe is inaccessible.
[ dhansen: minor changelog munging ] |
| In the Linux kernel, the following vulnerability has been resolved:
staging: most: remove broken i2c driver
The MOST I2C driver has been completely broken for five years without
anyone noticing so remove the driver from staging.
Specifically, commit 723de0f9171e ("staging: most: remove device from
interface structure") started requiring drivers to set the interface
device pointer before registration, but the I2C driver was never updated
which results in a NULL pointer dereference if anyone ever tries to
probe it. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: stratix10-svc: fix bug in saving controller data
Fix the incorrect usage of platform_set_drvdata and dev_set_drvdata. They
both are of the same data and overrides each other. This resulted in the
rmmod of the svc driver to fail and throw a kernel panic for kthread_stop
and fifo free. |
| In the Linux kernel, the following vulnerability has been resolved:
mm: hugetlb: avoid soft lockup when mprotect to large memory area
When calling mprotect() to a large hugetlb memory area in our customer's
workload (~300GB hugetlb memory), soft lockup was observed:
watchdog: BUG: soft lockup - CPU#98 stuck for 23s! [t2_new_sysv:126916]
CPU: 98 PID: 126916 Comm: t2_new_sysv Kdump: loaded Not tainted 6.17-rc7
Hardware name: GIGACOMPUTING R2A3-T40-AAV1/Jefferson CIO, BIOS 5.4.4.1 07/15/2025
pstate: 20400009 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : mte_clear_page_tags+0x14/0x24
lr : mte_sync_tags+0x1c0/0x240
sp : ffff80003150bb80
x29: ffff80003150bb80 x28: ffff00739e9705a8 x27: 0000ffd2d6a00000
x26: 0000ff8e4bc00000 x25: 00e80046cde00f45 x24: 0000000000022458
x23: 0000000000000000 x22: 0000000000000004 x21: 000000011b380000
x20: ffff000000000000 x19: 000000011b379f40 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
x11: 0000000000000000 x10: 0000000000000000 x9 : ffffc875e0aa5e2c
x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000000000
x5 : fffffc01ce7a5c00 x4 : 00000000046cde00 x3 : fffffc0000000000
x2 : 0000000000000004 x1 : 0000000000000040 x0 : ffff0046cde7c000
Call trace:
mte_clear_page_tags+0x14/0x24
set_huge_pte_at+0x25c/0x280
hugetlb_change_protection+0x220/0x430
change_protection+0x5c/0x8c
mprotect_fixup+0x10c/0x294
do_mprotect_pkey.constprop.0+0x2e0/0x3d4
__arm64_sys_mprotect+0x24/0x44
invoke_syscall+0x50/0x160
el0_svc_common+0x48/0x144
do_el0_svc+0x30/0xe0
el0_svc+0x30/0xf0
el0t_64_sync_handler+0xc4/0x148
el0t_64_sync+0x1a4/0x1a8
Soft lockup is not triggered with THP or base page because there is
cond_resched() called for each PMD size.
Although the soft lockup was triggered by MTE, it should be not MTE
specific. The other processing which takes long time in the loop may
trigger soft lockup too.
So add cond_resched() for hugetlb to avoid soft lockup. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/vt-d: debugfs: Fix legacy mode page table dump logic
In legacy mode, SSPTPTR is ignored if TT is not 00b or 01b. SSPTPTR
maybe uninitialized or zero in that case and may cause oops like:
Oops: general protection fault, probably for non-canonical address
0xf00087d3f000f000: 0000 [#1] SMP NOPTI
CPU: 2 UID: 0 PID: 786 Comm: cat Not tainted 6.16.0 #191 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.17.0-5.fc42 04/01/2014
RIP: 0010:pgtable_walk_level+0x98/0x150
RSP: 0018:ffffc90000f279c0 EFLAGS: 00010206
RAX: 0000000040000000 RBX: ffffc90000f27ab0 RCX: 000000000000001e
RDX: 0000000000000003 RSI: f00087d3f000f000 RDI: f00087d3f0010000
RBP: ffffc90000f27a00 R08: ffffc90000f27a98 R09: 0000000000000002
R10: 0000000000000000 R11: 0000000000000000 R12: f00087d3f000f000
R13: 0000000000000000 R14: 0000000040000000 R15: ffffc90000f27a98
FS: 0000764566dcb740(0000) GS:ffff8881f812c000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000764566d44000 CR3: 0000000109d81003 CR4: 0000000000772ef0
PKRU: 55555554
Call Trace:
<TASK>
pgtable_walk_level+0x88/0x150
domain_translation_struct_show.isra.0+0x2d9/0x300
dev_domain_translation_struct_show+0x20/0x40
seq_read_iter+0x12d/0x490
...
Avoid walking the page table if TT is not 00b or 01b. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: detect invalid INLINE_DATA + EXTENTS flag combination
syzbot reported a BUG_ON in ext4_es_cache_extent() when opening a verity
file on a corrupted ext4 filesystem mounted without a journal.
The issue is that the filesystem has an inode with both the INLINE_DATA
and EXTENTS flags set:
EXT4-fs error (device loop0): ext4_cache_extents:545: inode #15:
comm syz.0.17: corrupted extent tree: lblk 0 < prev 66
Investigation revealed that the inode has both flags set:
DEBUG: inode 15 - flag=1, i_inline_off=164, has_inline=1, extents_flag=1
This is an invalid combination since an inode should have either:
- INLINE_DATA: data stored directly in the inode
- EXTENTS: data stored in extent-mapped blocks
Having both flags causes ext4_has_inline_data() to return true, skipping
extent tree validation in __ext4_iget(). The unvalidated out-of-order
extents then trigger a BUG_ON in ext4_es_cache_extent() due to integer
underflow when calculating hole sizes.
Fix this by detecting this invalid flag combination early in ext4_iget()
and rejecting the corrupted inode. |
| In the Linux kernel, the following vulnerability has been resolved:
xsk: Harden userspace-supplied xdp_desc validation
Turned out certain clearly invalid values passed in xdp_desc from
userspace can pass xp_{,un}aligned_validate_desc() and then lead
to UBs or just invalid frames to be queued for xmit.
desc->len close to ``U32_MAX`` with a non-zero pool->tx_metadata_len
can cause positive integer overflow and wraparound, the same way low
enough desc->addr with a non-zero pool->tx_metadata_len can cause
negative integer overflow. Both scenarios can then pass the
validation successfully.
This doesn't happen with valid XSk applications, but can be used
to perform attacks.
Always promote desc->len to ``u64`` first to exclude positive
overflows of it. Use explicit check_{add,sub}_overflow() when
validating desc->addr (which is ``u64`` already).
bloat-o-meter reports a little growth of the code size:
add/remove: 0/0 grow/shrink: 2/1 up/down: 60/-16 (44)
Function old new delta
xskq_cons_peek_desc 299 330 +31
xsk_tx_peek_release_desc_batch 973 1002 +29
xsk_generic_xmit 3148 3132 -16
but hopefully this doesn't hurt the performance much. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/zcrx: fix overshooting recv limit
It's reported that sometimes a zcrx request can receive more than was
requested. It's caused by io_zcrx_recv_skb() adjusting desc->count for
all received buffers including frag lists, but then doing recursive
calls to process frag list skbs, which leads to desc->count double
accounting and underflow. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Free special fields when update [lru_,]percpu_hash maps
As [lru_,]percpu_hash maps support BPF_KPTR_{REF,PERCPU}, missing
calls to 'bpf_obj_free_fields()' in 'pcpu_copy_value()' could cause the
memory referenced by BPF_KPTR_{REF,PERCPU} fields to be held until the
map gets freed.
Fix this by calling 'bpf_obj_free_fields()' after
'copy_map_value[,_long]()' in 'pcpu_copy_value()'. |
