| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
hfs: fix to initialize fields of hfs_inode_info after hfs_alloc_inode()
Syzbot reports uninitialized value access issue as below:
loop0: detected capacity change from 0 to 64
=====================================================
BUG: KMSAN: uninit-value in hfs_revalidate_dentry+0x307/0x3f0 fs/hfs/sysdep.c:30
hfs_revalidate_dentry+0x307/0x3f0 fs/hfs/sysdep.c:30
d_revalidate fs/namei.c:862 [inline]
lookup_fast+0x89e/0x8e0 fs/namei.c:1649
walk_component fs/namei.c:2001 [inline]
link_path_walk+0x817/0x1480 fs/namei.c:2332
path_lookupat+0xd9/0x6f0 fs/namei.c:2485
filename_lookup+0x22e/0x740 fs/namei.c:2515
user_path_at_empty+0x8b/0x390 fs/namei.c:2924
user_path_at include/linux/namei.h:57 [inline]
do_mount fs/namespace.c:3689 [inline]
__do_sys_mount fs/namespace.c:3898 [inline]
__se_sys_mount+0x66b/0x810 fs/namespace.c:3875
__x64_sys_mount+0xe4/0x140 fs/namespace.c:3875
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x63/0x6b
BUG: KMSAN: uninit-value in hfs_ext_read_extent fs/hfs/extent.c:196 [inline]
BUG: KMSAN: uninit-value in hfs_get_block+0x92d/0x1620 fs/hfs/extent.c:366
hfs_ext_read_extent fs/hfs/extent.c:196 [inline]
hfs_get_block+0x92d/0x1620 fs/hfs/extent.c:366
block_read_full_folio+0x4ff/0x11b0 fs/buffer.c:2271
hfs_read_folio+0x55/0x60 fs/hfs/inode.c:39
filemap_read_folio+0x148/0x4f0 mm/filemap.c:2426
do_read_cache_folio+0x7c8/0xd90 mm/filemap.c:3553
do_read_cache_page mm/filemap.c:3595 [inline]
read_cache_page+0xfb/0x2f0 mm/filemap.c:3604
read_mapping_page include/linux/pagemap.h:755 [inline]
hfs_btree_open+0x928/0x1ae0 fs/hfs/btree.c:78
hfs_mdb_get+0x260c/0x3000 fs/hfs/mdb.c:204
hfs_fill_super+0x1fb1/0x2790 fs/hfs/super.c:406
mount_bdev+0x628/0x920 fs/super.c:1359
hfs_mount+0xcd/0xe0 fs/hfs/super.c:456
legacy_get_tree+0x167/0x2e0 fs/fs_context.c:610
vfs_get_tree+0xdc/0x5d0 fs/super.c:1489
do_new_mount+0x7a9/0x16f0 fs/namespace.c:3145
path_mount+0xf98/0x26a0 fs/namespace.c:3475
do_mount fs/namespace.c:3488 [inline]
__do_sys_mount fs/namespace.c:3697 [inline]
__se_sys_mount+0x919/0x9e0 fs/namespace.c:3674
__ia32_sys_mount+0x15b/0x1b0 fs/namespace.c:3674
do_syscall_32_irqs_on arch/x86/entry/common.c:112 [inline]
__do_fast_syscall_32+0xa2/0x100 arch/x86/entry/common.c:178
do_fast_syscall_32+0x37/0x80 arch/x86/entry/common.c:203
do_SYSENTER_32+0x1f/0x30 arch/x86/entry/common.c:246
entry_SYSENTER_compat_after_hwframe+0x70/0x82
Uninit was created at:
__alloc_pages+0x9a6/0xe00 mm/page_alloc.c:4590
__alloc_pages_node include/linux/gfp.h:238 [inline]
alloc_pages_node include/linux/gfp.h:261 [inline]
alloc_slab_page mm/slub.c:2190 [inline]
allocate_slab mm/slub.c:2354 [inline]
new_slab+0x2d7/0x1400 mm/slub.c:2407
___slab_alloc+0x16b5/0x3970 mm/slub.c:3540
__slab_alloc mm/slub.c:3625 [inline]
__slab_alloc_node mm/slub.c:3678 [inline]
slab_alloc_node mm/slub.c:3850 [inline]
kmem_cache_alloc_lru+0x64d/0xb30 mm/slub.c:3879
alloc_inode_sb include/linux/fs.h:3018 [inline]
hfs_alloc_inode+0x5a/0xc0 fs/hfs/super.c:165
alloc_inode+0x83/0x440 fs/inode.c:260
new_inode_pseudo fs/inode.c:1005 [inline]
new_inode+0x38/0x4f0 fs/inode.c:1031
hfs_new_inode+0x61/0x1010 fs/hfs/inode.c:186
hfs_mkdir+0x54/0x250 fs/hfs/dir.c:228
vfs_mkdir+0x49a/0x700 fs/namei.c:4126
do_mkdirat+0x529/0x810 fs/namei.c:4149
__do_sys_mkdirat fs/namei.c:4164 [inline]
__se_sys_mkdirat fs/namei.c:4162 [inline]
__x64_sys_mkdirat+0xc8/0x120 fs/namei.c:4162
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x63/0x6b
It missed to initialize .tz_secondswest, .cached_start and .cached_blocks
fields in struct hfs_inode_info after hfs_alloc_inode(), fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
ovl: Filter invalid inodes with missing lookup function
Add a check to the ovl_dentry_weird() function to prevent the
processing of directory inodes that lack the lookup function.
This is important because such inodes can cause errors in overlayfs
when passed to the lowerstack. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/lam: Disable ADDRESS_MASKING in most cases
Linear Address Masking (LAM) has a weakness related to transient
execution as described in the SLAM paper[1]. Unless Linear Address
Space Separation (LASS) is enabled this weakness may be exploitable.
Until kernel adds support for LASS[2], only allow LAM for COMPILE_TEST,
or when speculation mitigations have been disabled at compile time,
otherwise keep LAM disabled.
There are no processors in market that support LAM yet, so currently
nobody is affected by this issue.
[1] SLAM: https://download.vusec.net/papers/slam_sp24.pdf
[2] LASS: https://lore.kernel.org/lkml/20230609183632.48706-1-alexander.shishkin@linux.intel.com/
[ dhansen: update SPECULATION_MITIGATIONS -> CPU_MITIGATIONS ] |
| In the Linux kernel, the following vulnerability has been resolved:
mm: avoid leaving partial pfn mappings around in error case
As Jann points out, PFN mappings are special, because unlike normal
memory mappings, there is no lifetime information associated with the
mapping - it is just a raw mapping of PFNs with no reference counting of
a 'struct page'.
That's all very much intentional, but it does mean that it's easy to
mess up the cleanup in case of errors. Yes, a failed mmap() will always
eventually clean up any partial mappings, but without any explicit
lifetime in the page table mapping itself, it's very easy to do the
error handling in the wrong order.
In particular, it's easy to mistakenly free the physical backing store
before the page tables are actually cleaned up and (temporarily) have
stale dangling PTE entries.
To make this situation less error-prone, just make sure that any partial
pfn mapping is torn down early, before any other error handling. |
| In the Linux kernel, the following vulnerability has been resolved:
ELF: fix kernel.randomize_va_space double read
ELF loader uses "randomize_va_space" twice. It is sysctl and can change
at any moment, so 2 loads could see 2 different values in theory with
unpredictable consequences.
Issue exactly one load for consistent value across one exec. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: nl80211: disallow setting special AP channel widths
Setting the AP channel width is meant for use with the normal
20/40/... MHz channel width progression, and switching around
in S1G or narrow channels isn't supported. Disallow that. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Fix for possible memory corruption
Init Control Block is dereferenced incorrectly. Correctly dereference ICB |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: ecdh - explicitly zeroize private_key
private_key is overwritten with the key parameter passed in by the
caller (if present), or alternatively a newly generated private key.
However, it is possible that the caller provides a key (or the newly
generated key) which is shorter than the previous key. In that
scenario, some key material from the previous key would not be
overwritten. The easiest solution is to explicitly zeroize the entire
private_key array first.
Note that this patch slightly changes the behavior of this function:
previously, if the ecc_gen_privkey failed, the old private_key would
remain. Now, the private_key is always zeroized. This behavior is
consistent with the case where params.key is set and ecc_is_key_valid
fails. |
| In the Linux kernel, the following vulnerability has been resolved:
ibmvnic: Add tx check to prevent skb leak
Below is a summary of how the driver stores a reference to an skb during
transmit:
tx_buff[free_map[consumer_index]]->skb = new_skb;
free_map[consumer_index] = IBMVNIC_INVALID_MAP;
consumer_index ++;
Where variable data looks like this:
free_map == [4, IBMVNIC_INVALID_MAP, IBMVNIC_INVALID_MAP, 0, 3]
consumer_index^
tx_buff == [skb=null, skb=<ptr>, skb=<ptr>, skb=null, skb=null]
The driver has checks to ensure that free_map[consumer_index] pointed to
a valid index but there was no check to ensure that this index pointed
to an unused/null skb address. So, if, by some chance, our free_map and
tx_buff lists become out of sync then we were previously risking an
skb memory leak. This could then cause tcp congestion control to stop
sending packets, eventually leading to ETIMEDOUT.
Therefore, add a conditional to ensure that the skb address is null. If
not then warn the user (because this is still a bug that should be
patched) and free the old pointer to prevent memleak/tcp problems. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/radeon: check bo_va->bo is non-NULL before using it
The call to radeon_vm_clear_freed might clear bo_va->bo, so
we have to check it before dereferencing it. |
| In the Linux kernel, the following vulnerability has been resolved:
jfs: don't walk off the end of ealist
Add a check before visiting the members of ea to
make sure each ea stays within the ealist. |
| In the Linux kernel, the following vulnerability has been resolved:
uio_hv_generic: Don't free decrypted memory
In CoCo VMs it is possible for the untrusted host to cause
set_memory_encrypted() or set_memory_decrypted() to fail such that an
error is returned and the resulting memory is shared. Callers need to
take care to handle these errors to avoid returning decrypted (shared)
memory to the page allocator, which could lead to functional or security
issues.
The VMBus device UIO driver could free decrypted/shared pages if
set_memory_decrypted() fails. Check the decrypted field in the gpadl
to decide whether to free the memory. |
| In the Linux kernel, the following vulnerability has been resolved:
media: rc: bpf attach/detach requires write permission
Note that bpf attach/detach also requires CAP_NET_ADMIN. |
| In the Linux kernel, the following vulnerability has been resolved:
um: time-travel: fix time corruption
In 'basic' time-travel mode (without =inf-cpu or =ext), we
still get timer interrupts. These can happen at arbitrary
points in time, i.e. while in timer_read(), which pushes
time forward just a little bit. Then, if we happen to get
the interrupt after calculating the new time to push to,
but before actually finishing that, the interrupt will set
the time to a value that's incompatible with the forward,
and we'll crash because time goes backwards when we do the
forwarding.
Fix this by reading the time_travel_time, calculating the
adjustment, and doing the adjustment all with interrupts
disabled. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: switchtec: Fix stdev_release() crash after surprise hot remove
A PCI device hot removal may occur while stdev->cdev is held open. The call
to stdev_release() then happens during close or exit, at a point way past
switchtec_pci_remove(). Otherwise the last ref would vanish with the
trailing put_device(), just before return.
At that later point in time, the devm cleanup has already removed the
stdev->mmio_mrpc mapping. Also, the stdev->pdev reference was not a counted
one. Therefore, in DMA mode, the iowrite32() in stdev_release() will cause
a fatal page fault, and the subsequent dma_free_coherent(), if reached,
would pass a stale &stdev->pdev->dev pointer.
Fix by moving MRPC DMA shutdown into switchtec_pci_remove(), after
stdev_kill(). Counting the stdev->pdev ref is now optional, but may prevent
future accidents.
Reproducible via the script at
https://lore.kernel.org/r/20231113212150.96410-1-dns@arista.com |
| In the Linux kernel, the following vulnerability has been resolved:
s390/ptrace: handle setting of fpc register correctly
If the content of the floating point control (fpc) register of a traced
process is modified with the ptrace interface the new value is tested for
validity by temporarily loading it into the fpc register.
This may lead to corruption of the fpc register of the tracing process:
if an interrupt happens while the value is temporarily loaded into the
fpc register, and within interrupt context floating point or vector
registers are used, the current fp/vx registers are saved with
save_fpu_regs() assuming they belong to user space and will be loaded into
fp/vx registers when returning to user space.
test_fp_ctl() restores the original user space fpc register value, however
it will be discarded, when returning to user space.
In result the tracer will incorrectly continue to run with the value that
was supposed to be used for the traced process.
Fix this by saving fpu register contents with save_fpu_regs() before using
test_fp_ctl(). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rt2x00: restart beacon queue when hardware reset
When a hardware reset is triggered, all registers are reset, so all
queues are forced to stop in hardware interface. However, mac80211
will not automatically stop the queue. If we don't manually stop the
beacon queue, the queue will be deadlocked and unable to start again.
This patch fixes the issue where Apple devices cannot connect to the
AP after calling ieee80211_restart_hw(). |
| In the Linux kernel, the following vulnerability has been resolved:
spi: sun6i: reduce DMA RX transfer width to single byte
Through empirical testing it has been determined that sometimes RX SPI
transfers with DMA enabled return corrupted data. This is down to single
or even multiple bytes lost during DMA transfer from SPI peripheral to
memory. It seems the RX FIFO within the SPI peripheral can become
confused when performing bus read accesses wider than a single byte to it
during an active SPI transfer.
This patch reduces the width of individual DMA read accesses to the
RX FIFO to a single byte to mitigate that issue. |
| Umbraco is an ASP.NET CMS. Due to unsafe handling and deletion of temporary files in versions 10.0.0 through 13.12.0, during the dictionary upload process an attacker with access to the backoffice can trigger predictable requests to temporary file paths. The application’s error responses (HTTP 500 when a file exists, 404 when it does not) allow the attacker to enumerate the existence of arbitrary files on the server’s filesystem. This vulnerability does not allow reading or writing file contents. In certain configurations, incomplete clean-up of temporary upload files may additionally expose the NTLM hash of the Windows account running the Umbraco application. This issue is fixed in version 13.12.1. |
| XiangShan Nanhu V2 and XiangShan Kunmighu V3 were discovered to use speculative execution and indirect branch prediction, allowing attackers to access sensitive information via side-channel analysis of the data cache. |
