| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Net::CIDR::Lite versions before 0.23 for Perl mishandles IPv4 mapped IPv6 addresses, which may allow IP ACL bypass.
_pack_ipv6() includes the sentinel byte from _pack_ipv4() when building the packed representation of IPv4 mapped addresses like ::ffff:192.168.1.1. This produces an 18 byte value instead of 17 bytes, misaligning the IPv4 part of the address.
The wrong length causes incorrect results in mask operations (bitwise AND truncates to the shorter operand) and in find() / bin_find() which use Perl string comparison (lt/gt). This can cause find() to incorrectly match or miss addresses.
Example:
my $cidr = Net::CIDR::Lite->new("::ffff:192.168.1.0/120");
$cidr->find("::ffff:192.168.2.0"); # incorrectly returns true
This is triggered by valid RFC 4291 IPv4 mapped addresses (::ffff:x.x.x.x).
See also CVE-2026-40198, a related issue in the same function affecting malformed IPv6 addresses. |
| Hono is a Web application framework that provides support for any JavaScript runtime. Prior to 4.12.12, ipRestriction() does not canonicalize IPv4-mapped IPv6 client addresses (e.g. ::ffff:127.0.0.1) before applying IPv4 allow or deny rules. In environments such as Node.js dual-stack, this can cause IPv4 rules to fail to match, leading to unintended authorization behavior. This vulnerability is fixed in 4.12.12. |
| Integer overflow in the fb_mmap function in drivers/video/fbmem.c in the Linux kernel before 3.8.9, as used in a certain Motorola build of Android 4.1.2 and other products, allows local users to create a read-write memory mapping for the entirety of kernel memory, and consequently gain privileges, via crafted /dev/graphics/fb0 mmap2 system calls, as demonstrated by the Motochopper pwn program. |
| The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities.
The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload.
Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable.
There are workarounds that address these vulnerabilities. |
| The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities.
The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload.
Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable.
There are workarounds that address these vulnerabilities. |
| The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities.
The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload.
Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable.
There are workarounds that address these vulnerabilities. |
| The DHCP relay subsystem of Cisco IOS 12.2 through 15.6 and Cisco IOS XE Software contains a vulnerability that could allow an unauthenticated, remote attacker to execute arbitrary code and gain full control of an affected system. The attacker could also cause an affected system to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to a buffer overflow condition in the DHCP relay subsystem of the affected software. An attacker could exploit this vulnerability by sending a crafted DHCP Version 4 (DHCPv4) packet to an affected system. A successful exploit could allow the attacker to execute arbitrary code and gain full control of the affected system or cause the affected system to reload, resulting in a DoS condition. Cisco Bug IDs: CSCsm45390, CSCuw77959. |
| Buffer overflow in the ScStoragePathFromUrl function in the WebDAV service in Internet Information Services (IIS) 6.0 in Microsoft Windows Server 2003 R2 allows remote attackers to execute arbitrary code via a long header beginning with "If: <http://" in a PROPFIND request, as exploited in the wild in July or August 2016. |
| Linux distributions that have not patched their long-term kernels with https://git.kernel.org/linus/a87938b2e246b81b4fb713edb371a9fa3c5c3c86 (committed on April 14, 2015). This kernel vulnerability was fixed in April 2015 by commit a87938b2e246b81b4fb713edb371a9fa3c5c3c86 (backported to Linux 3.10.77 in May 2015), but it was not recognized as a security threat. With CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE enabled, and a normal top-down address allocation strategy, load_elf_binary() will attempt to map a PIE binary into an address range immediately below mm->mmap_base. Unfortunately, load_elf_ binary() does not take account of the need to allocate sufficient space for the entire binary which means that, while the first PT_LOAD segment is mapped below mm->mmap_base, the subsequent PT_LOAD segment(s) end up being mapped above mm->mmap_base into the are that is supposed to be the "gap" between the stack and the binary. |
| Incorrect handling of complex species in V8 in Google Chrome prior to 57.0.2987.98 for Linux, Windows, and Mac and 57.0.2987.108 for Android allowed a remote attacker to execute arbitrary code via a crafted HTML page. |
| The Array.prototype.concat implementation in builtins.cc in Google V8, as used in Google Chrome before 49.0.2623.108, does not properly consider element data types, which allows remote attackers to cause a denial of service (out-of-bounds read) or possibly have unspecified other impact via crafted JavaScript code. |
| The rds_page_copy_user function in net/rds/page.c in the Reliable Datagram Sockets (RDS) protocol implementation in the Linux kernel before 2.6.36 does not properly validate addresses obtained from user space, which allows local users to gain privileges via crafted use of the sendmsg and recvmsg system calls. |
| A integer overflow or wraparound vulnerability in Fortinet FortiWeb 8.0.0 through 8.0.3, FortiWeb 7.6.0 through 7.6.6, FortiWeb 7.4 all versions, FortiWeb 7.2 all versions, FortiWeb 7.0 all versions may allow attacker to denial of service via <insert attack vector here> |
| The NETGEAR WNR2000v5 router contains a buffer overflow in the hidden_lang_avi parameter when invoking the URL /apply.cgi?/lang_check.html. This buffer overflow can be exploited by an unauthenticated attacker to achieve remote code execution. |
| OpenClaw before 2026.3.28 loads the current working directory .env file before trusted state-dir configuration, allowing environment variable injection. Attackers can place a malicious .env file in a repository or workspace to override runtime configuration and security-sensitive environment settings during OpenClaw startup. |
| The Popup Builder – Create highly converting, mobile friendly marketing popups. plugin for WordPress is vulnerable to authorization bypass in all versions up to, and including, 4.4.2. This is due to the plugin generating predictable unsubscribe tokens using deterministic data. This makes it possible for unauthenticated attackers to unsubscribe arbitrary subscribers from mailing lists via brute-forcing the unsubscribe token, granted they know the victim's email address |
| The Shopire theme for WordPress is vulnerable to unauthorized modification of data due to a missing capability check on the shopire_admin_install_plugin() function in all versions up to, and including, 1.0.57. This makes it possible for authenticated attackers, with Subscriber-level access and above, to install the 'fable-extra' plugin. |
| A flaw was found in GIMP's PSP (Paint Shop Pro) file parser. A remote attacker could exploit an integer overflow vulnerability in the read_creator_block() function by providing a specially crafted PSP image file. This vulnerability occurs when a 32-bit length value from the file is used for memory allocation without proper validation, leading to a heap overflow and an out-of-bounds write. Successful exploitation could result in an application level denial of service. |
| Apache Log4cxx's XMLLayout https://logging.apache.org/log4cxx/1.7.0/classlog4cxx_1_1xml_1_1XMLLayout.html , in versions before 1.7.0, fails to sanitize characters forbidden by the XML 1.0 specification https://www.w3.org/TR/xml/#charsets in log messages, NDC, and MDC property keys and values, producing invalid XML output. Conforming XML parsers must reject such documents with a fatal error, which may cause downstream log processing systems to drop or fail to index affected records.
An attacker who can influence logged data can exploit this to suppress individual log records, impairing audit trails and detection of malicious activity.
Users are advised to upgrade to Apache Log4cxx 1.7.0, which fixes this issue. |
| libexif through 0.6.25 has a flaw in decoding MakerNotes. If the exif_mnote_data_get_value function gets passed in a 0 size, the passed in-buffer would be overwritten due to an integer underflow. |
