| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Use of Hard-coded Cryptographic Key vulnerability in WatchGuard Agent on Windows allows Inclusion of Code in Existing Process.This issue affects WatchGuard Agent: before 1.25.03.0000. |
| Uncontrolled Search Path Element vulnerability in WatchGuard Agent on Windows allows Using Malicious Files.This issue affects WatchGuard Agent before 1.25.03.0000. |
| In the Linux kernel, the following vulnerability has been resolved:
ovpn: tcp - fix packet extraction from stream
When processing TCP stream data in ovpn_tcp_recv, we receive large
cloned skbs from __strp_rcv that may contain multiple coalesced packets.
The current implementation has two bugs:
1. Header offset overflow: Using pskb_pull with large offsets on
coalesced skbs causes skb->data - skb->head to exceed the u16 storage
of skb->network_header. This causes skb_reset_network_header to fail
on the inner decapsulated packet, resulting in packet drops.
2. Unaligned protocol headers: Extracting packets from arbitrary
positions within the coalesced TCP stream provides no alignment
guarantees for the packet data causing performance penalties on
architectures without efficient unaligned access. Additionally,
openvpn's 2-byte length prefix on TCP packets causes the subsequent
4-byte opcode and packet ID fields to be inherently misaligned.
Fix both issues by allocating a new skb for each openvpn packet and
using skb_copy_bits to extract only the packet content into the new
buffer, skipping the 2-byte length prefix. Also, check the length before
invoking the function that performs the allocation to avoid creating an
invalid skb.
If the packet has to be forwarded to userspace the 2-byte prefix can be
pushed to the head safely, without misalignment.
As a side effect, this approach also avoids the expensive linearization
that pskb_pull triggers on cloned skbs with page fragments. In testing,
this resulted in TCP throughput improvements of up to 74%. |
| In the Linux kernel, the following vulnerability has been resolved:
media: qcom: camss: vfe: Fix out-of-bounds access in vfe_isr_reg_update()
vfe_isr() iterates using MSM_VFE_IMAGE_MASTERS_NUM(7) as the loop
bound and passes the index to vfe_isr_reg_update(). However,
vfe->line[] array is defined with VFE_LINE_NUM_MAX(4):
struct vfe_line line[VFE_LINE_NUM_MAX];
When index is 4, 5, 6, the access to vfe->line[line_id] exceeds
the array bounds and resulting in out-of-bounds memory access.
Fix this by using separate loops for output lines and write masters. |
| XML::LibXML versions through 2.0210 for Perl read out-of-bounds heap memory when parsing XML node names containing truncated UTF-8 byte sequences.
A node name ending in the middle of a multi byte UTF-8 sequence causes the parser to read past the end of the input string into adjacent heap memory.
Any Perl process that passes attacker controlled strings to XML::LibXML's DOM node-name methods can reach this path on the default API. The likely consequence is a crash, causing denial of service. |
| The Custom css-js-php WordPress plugin through 2.0.7 does not properly sanitize user input before using it in a SQL query, and the result is passed to eval(), allowing unauthenticated users to execute arbitrary PHP code on the server. |
| OpenClaw before 2026.4.20 contains a guard bypass vulnerability in the agent-facing gateway config.patch and config.apply endpoints that fails to protect operator-trusted settings including sandbox policy, plugin enablement, gateway auth/TLS, hook routing, MCP server configuration, SSRF policy, and filesystem hardening. A prompt-injected model with access to the owner-only gateway tool can persist unauthorized changes to protected operator settings. |
| OpenClaw before 2026.4.20 contains an improper environment variable validation vulnerability in MCP stdio server configuration that allows attackers to execute arbitrary code. Malicious workspace configurations can pass dangerous startup variables like NODE_OPTIONS, LD_PRELOAD, or BASH_ENV to spawned MCP server processes, enabling code injection when operators start sessions using those servers. |
| OWASP BLT is a QA testing and vulnerability disclosure platform that encompasses websites, apps, git repositories, and more. Prior to 2.1.2, .github/workflows/pre-commit-fix.yaml uses pull_request_target (privileged trigger) but checks out and executes code directly from the attacker's fork, enabling RCE with write permissions. This vulnerability is fixed in 2.1.2. |
| 7-Zip is a file archiver with a high compression ratio. Zeroes written outside heap buffer in RAR5 handler may lead to memory corruption and denial of service in versions of 7-Zip prior to 25.0.0. Version 25.0.0 contains a fix for the issue. |
| In Modem IMS, there is a possible improper input validation. This could lead to remote denial of service with no additional execution privileges needed. |
| In the Linux kernel, the following vulnerability has been resolved:
alpha: fix user-space corruption during memory compaction
Alpha systems can suffer sporadic user-space crashes and heap
corruption when memory compaction is enabled.
Symptoms include SIGSEGV, glibc allocator failures (e.g. "unaligned
tcache chunk"), and compiler internal errors. The failures disappear
when compaction is disabled or when using global TLB invalidation.
The root cause is insufficient TLB shootdown during page migration.
Alpha relies on ASN-based MM context rollover for instruction cache
coherency, but this alone is not sufficient to prevent stale data or
instruction translations from surviving migration.
Fix this by introducing a migration-specific helper that combines:
- MM context invalidation (ASN rollover),
- immediate per-CPU TLB invalidation (TBI),
- synchronous cross-CPU shootdown when required.
The helper is used only by migration/compaction paths to avoid changing
global TLB semantics.
Additionally, update flush_tlb_other(), pte_clear(), to use
READ_ONCE()/WRITE_ONCE() for correct SMP memory ordering.
This fixes observed crashes on both UP and SMP Alpha systems. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: fix potential out-of-bounds read in iwl_mvm_nd_match_info_handler()
The memcpy function assumes the dynamic array notif->matches is at least
as large as the number of bytes to copy. Otherwise, results->matches may
contain unwanted data. To guarantee safety, extend the validation in one
of the checks to ensure sufficient packet length.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_event: move wake reason storage into validated event handlers
hci_store_wake_reason() is called from hci_event_packet() immediately
after stripping the HCI event header but before hci_event_func()
enforces the per-event minimum payload length from hci_ev_table.
This means a short HCI event frame can reach bacpy() before any bounds
check runs.
Rather than duplicating skb parsing and per-event length checks inside
hci_store_wake_reason(), move wake-address storage into the individual
event handlers after their existing event-length validation has
succeeded. Convert hci_store_wake_reason() into a small helper that only
stores an already-validated bdaddr while the caller holds hci_dev_lock().
Use the same helper after hci_event_func() with a NULL address to
preserve the existing unexpected-wake fallback semantics when no
validated event handler records a wake address.
Annotate the helper with __must_hold(&hdev->lock) and add
lockdep_assert_held(&hdev->lock) so future call paths keep the lock
contract explicit.
Call the helper from hci_conn_request_evt(), hci_conn_complete_evt(),
hci_sync_conn_complete_evt(), le_conn_complete_evt(),
hci_le_adv_report_evt(), hci_le_ext_adv_report_evt(),
hci_le_direct_adv_report_evt(), hci_le_pa_sync_established_evt(), and
hci_le_past_received_evt(). |
| In the Linux kernel, the following vulnerability has been resolved:
gpib: fix use-after-free in IO ioctl handlers
The IBRD, IBWRT, IBCMD, and IBWAIT ioctl handlers use a gpib_descriptor
pointer after board->big_gpib_mutex has been released. A concurrent
IBCLOSEDEV ioctl can free the descriptor via close_dev_ioctl() during
this window, causing a use-after-free.
The IO handlers (read_ioctl, write_ioctl, command_ioctl) explicitly
release big_gpib_mutex before calling their handler. wait_ioctl() is
called with big_gpib_mutex held, but ibwait() releases it internally
when wait_mask is non-zero. In all four cases, the descriptor pointer
obtained from handle_to_descriptor() becomes unprotected.
Fix this by introducing a kernel-only descriptor_busy reference count
in struct gpib_descriptor. Each handler atomically increments
descriptor_busy under file_priv->descriptors_mutex before releasing the
lock, and decrements it when done. close_dev_ioctl() checks
descriptor_busy under the same lock and rejects the close with -EBUSY
if the count is non-zero.
A reference count rather than a simple flag is necessary because
multiple handlers can operate on the same descriptor concurrently
(e.g. IBRD and IBWAIT on the same handle from different threads).
A separate counter is needed because io_in_progress can be cleared from
unprivileged userspace via the IBWAIT ioctl (through general_ibstatus()
with set_mask containing CMPL), which would allow an attacker to bypass
a check based solely on io_in_progress. The new descriptor_busy
counter is only modified by the kernel IO paths.
The lock ordering is consistent (big_gpib_mutex -> descriptors_mutex)
and the handlers only hold descriptors_mutex briefly during the lookup,
so there is no deadlock risk and no impact on IO throughput. |
| pygeoapi is a Python server implementation of the OGC API suite of standards. From version 0.23.0 to before version 0.23.3, OGC API process execution requests can use the subscriber object to requests to internal HTTP services. This issue has been patched in version 0.23.3. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: ti-adc161s626: use DMA-safe memory for spi_read()
Add a DMA-safe buffer and use it for spi_read() instead of a stack
memory. All SPI buffers must be DMA-safe.
Since we only need up to 3 bytes, we just use a u8[] instead of __be16
and __be32 and change the conversion functions appropriately. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: validate doorbell_offset in user queue creation
amdgpu_userq_get_doorbell_index() passes the user-provided
doorbell_offset to amdgpu_doorbell_index_on_bar() without bounds
checking. An arbitrarily large doorbell_offset can cause the
calculated doorbell index to fall outside the allocated doorbell BO,
potentially corrupting kernel doorbell space.
Validate that doorbell_offset falls within the doorbell BO before
computing the BAR index, using u64 arithmetic to prevent overflow.
(cherry picked from commit de1ef4ffd70e1d15f0bf584fd22b1f28cbd5e2ec) |
| GitPython is a python library used to interact with Git repositories. From version 3.1.30 to before version 3.1.47, GitPython blocks dangerous Git options such as --upload-pack and --receive-pack by default, but the equivalent Python kwargs upload_pack and receive_pack bypass that check. If an application passes attacker-controlled kwargs into Repo.clone_from(), Remote.fetch(), Remote.pull(), or Remote.push(), this leads to arbitrary command execution even when allow_unsafe_options is left at its default value of False. This issue has been patched in version 3.1.47. |
| GitPython is a python library used to interact with Git repositories. Prior to version 3.1.49, GitConfigParser.set_value() passes values to Python's configparser without validating for newlines. GitPython's own _write() converts embedded newlines into indented continuation lines (e.g. \n becomes \n\t), but Git still accepts an indented [core] stanza as a section header — so the injected core.hooksPath becomes effective configuration. Any Git operation that invokes hooks (commit, merge, checkout) will then execute scripts from the attacker-controlled path. This issue has been patched in version 3.1.49. |
