| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to avoid migrating empty section
It reports a bug from device w/ zufs:
F2FS-fs (dm-64): Inconsistent segment (173822) type [1, 0] in SSA and SIT
F2FS-fs (dm-64): Stopped filesystem due to reason: 4
Thread A Thread B
- f2fs_expand_inode_data
- f2fs_allocate_pinning_section
- f2fs_gc_range
- do_garbage_collect w/ segno #x
- writepage
- f2fs_allocate_data_block
- new_curseg
- allocate segno #x
The root cause is: fallocate on pinning file may race w/ block allocation
as above, result in do_garbage_collect() from fallocate() may migrate
segment which is just allocated by a log, the log will update segment type
in its in-memory structure, however GC will get segment type from on-disk
SSA block, once segment type changes by log, we can detect such
inconsistency, then shutdown filesystem.
In this case, on-disk SSA shows type of segno #173822 is 1 (SUM_TYPE_NODE),
however segno #173822 was just allocated as data type segment, so in-memory
SIT shows type of segno #173822 is 0 (SUM_TYPE_DATA).
Change as below to fix this issue:
- check whether current section is empty before gc
- add sanity checks on do_garbage_collect() to avoid any race case, result
in migrating segment used by log.
- btw, it fixes misc issue in printed logs: "SSA and SIT" -> "SIT and SSA". |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: amd/sdw_utils: avoid NULL deref when devm_kasprintf() fails
devm_kasprintf() may return NULL on memory allocation failure,
but the debug message prints cpus->dai_name before checking it.
Move the dev_dbg() call after the NULL check to prevent potential
NULL pointer dereference. |
| NVIDIA NVTabular for Linux contains a vulnerability in the Workflow component, where a user could cause a deserialization issue. A successful exploit of this vulnerability might lead to code execution, denial of service, information disclosure, and data tampering. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject negative offsets for ALU ops
When verifying BPF programs, the check_alu_op() function validates
instructions with ALU operations. The 'offset' field in these
instructions is a signed 16-bit integer.
The existing check 'insn->off > 1' was intended to ensure the offset is
either 0, or 1 for BPF_MOD/BPF_DIV. However, because 'insn->off' is
signed, this check incorrectly accepts all negative values (e.g., -1).
This commit tightens the validation by changing the condition to
'(insn->off != 0 && insn->off != 1)'. This ensures that any value
other than the explicitly permitted 0 and 1 is rejected, hardening the
verifier against malformed BPF programs. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet-fc: move lsop put work to nvmet_fc_ls_req_op
It’s possible for more than one async command to be in flight from
__nvmet_fc_send_ls_req. For each command, a tgtport reference is taken.
In the current code, only one put work item is queued at a time, which
results in a leaked reference.
To fix this, move the work item to the nvmet_fc_ls_req_op struct, which
already tracks all resources related to the command. |
| In the Linux kernel, the following vulnerability has been resolved:
net/ip6_tunnel: Prevent perpetual tunnel growth
Similarly to ipv4 tunnel, ipv6 version updates dev->needed_headroom, too.
While ipv4 tunnel headroom adjustment growth was limited in
commit 5ae1e9922bbd ("net: ip_tunnel: prevent perpetual headroom growth"),
ipv6 tunnel yet increases the headroom without any ceiling.
Reflect ipv4 tunnel headroom adjustment limit on ipv6 version.
Credits to Francesco Ruggeri, who was originally debugging this issue
and wrote local Arista-specific patch and a reproducer. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/mm: Fix SMP ordering in switch_mm_irqs_off()
Stephen noted that it is possible to not have an smp_mb() between
the loaded_mm store and the tlb_gen load in switch_mm(), meaning the
ordering against flush_tlb_mm_range() goes out the window, and it
becomes possible for switch_mm() to not observe a recent tlb_gen
update and fail to flush the TLBs.
[ dhansen: merge conflict fixed by Ingo ] |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: verify orphan file size is not too big
In principle orphan file can be arbitrarily large. However orphan replay
needs to traverse it all and we also pin all its buffers in memory. Thus
filesystems with absurdly large orphan files can lead to big amounts of
memory consumed. Limit orphan file size to a sane value and also use
kvmalloc() for allocating array of block descriptor structures to avoid
large order allocations for sane but large orphan files. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: skcipher - Fix reqsize handling
Commit afddce13ce81d ("crypto: api - Add reqsize to crypto_alg")
introduced cra_reqsize field in crypto_alg struct to replace type
specific reqsize fields. It looks like this was introduced specifically
for ahash and acomp from the commit description as subsequent commits
add necessary changes in these alg frameworks.
However, this is being recommended for use in all crypto algs [1]
instead of setting reqsize using crypto_*_set_reqsize(). Using
cra_reqsize in skcipher algorithms, hence, causes memory
corruptions and crashes as the underlying functions in the algorithm
framework have not been updated to set the reqsize properly from
cra_reqsize. [2]
Add proper set_reqsize calls in the skcipher init function to
properly initialize reqsize for these algorithms in the framework.
[1]: https://lore.kernel.org/linux-crypto/aCL8BxpHr5OpT04k@gondor.apana.org.au/
[2]: https://gist.github.com/Pratham-T/24247446f1faf4b7843e4014d5089f6b |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix metadata_dst leak __bpf_redirect_neigh_v{4,6}
Cilium has a BPF egress gateway feature which forces outgoing K8s Pod
traffic to pass through dedicated egress gateways which then SNAT the
traffic in order to interact with stable IPs outside the cluster.
The traffic is directed to the gateway via vxlan tunnel in collect md
mode. A recent BPF change utilized the bpf_redirect_neigh() helper to
forward packets after the arrival and decap on vxlan, which turned out
over time that the kmalloc-256 slab usage in kernel was ever-increasing.
The issue was that vxlan allocates the metadata_dst object and attaches
it through a fake dst entry to the skb. The latter was never released
though given bpf_redirect_neigh() was merely setting the new dst entry
via skb_dst_set() without dropping an existing one first. |
| In the Linux kernel, the following vulnerability has been resolved:
cpufreq: intel_pstate: Fix object lifecycle issue in update_qos_request()
The cpufreq_cpu_put() call in update_qos_request() takes place too early
because the latter subsequently calls freq_qos_update_request() that
indirectly accesses the policy object in question through the QoS request
object passed to it.
Fortunately, update_qos_request() is called under intel_pstate_driver_lock,
so this issue does not matter for changing the intel_pstate operation
mode, but it theoretically can cause a crash to occur on CPU device hot
removal (which currently can only happen in virt, but it is formally
supported nevertheless).
Address this issue by modifying update_qos_request() to drop the
reference to the policy later. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_objref: validate objref and objrefmap expressions
Referencing a synproxy stateful object from OUTPUT hook causes kernel
crash due to infinite recursive calls:
BUG: TASK stack guard page was hit at 000000008bda5b8c (stack is 000000003ab1c4a5..00000000494d8b12)
[...]
Call Trace:
__find_rr_leaf+0x99/0x230
fib6_table_lookup+0x13b/0x2d0
ip6_pol_route+0xa4/0x400
fib6_rule_lookup+0x156/0x240
ip6_route_output_flags+0xc6/0x150
__nf_ip6_route+0x23/0x50
synproxy_send_tcp_ipv6+0x106/0x200
synproxy_send_client_synack_ipv6+0x1aa/0x1f0
nft_synproxy_do_eval+0x263/0x310
nft_do_chain+0x5a8/0x5f0 [nf_tables
nft_do_chain_inet+0x98/0x110
nf_hook_slow+0x43/0xc0
__ip6_local_out+0xf0/0x170
ip6_local_out+0x17/0x70
synproxy_send_tcp_ipv6+0x1a2/0x200
synproxy_send_client_synack_ipv6+0x1aa/0x1f0
[...]
Implement objref and objrefmap expression validate functions.
Currently, only NFT_OBJECT_SYNPROXY object type requires validation.
This will also handle a jump to a chain using a synproxy object from the
OUTPUT hook.
Now when trying to reference a synproxy object in the OUTPUT hook, nft
will produce the following error:
synproxy_crash.nft: Error: Could not process rule: Operation not supported
synproxy name mysynproxy
^^^^^^^^^^^^^^^^^^^^^^^^ |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "NFSD: Remove the cap on number of operations per NFSv4 COMPOUND"
I've found that pynfs COMP6 now leaves the connection or lease in a
strange state, which causes CLOSE9 to hang indefinitely. I've dug
into it a little, but I haven't been able to root-cause it yet.
However, I bisected to commit 48aab1606fa8 ("NFSD: Remove the cap on
number of operations per NFSv4 COMPOUND").
Tianshuo Han also reports a potential vulnerability when decoding
an NFSv4 COMPOUND. An attacker can place an arbitrarily large op
count in the COMPOUND header, which results in:
[ 51.410584] nfsd: vmalloc error: size 1209533382144, exceeds total
pages, mode:0xdc0(GFP_KERNEL|__GFP_ZERO),
nodemask=(null),cpuset=/,mems_allowed=0
when NFSD attempts to allocate the COMPOUND op array.
Let's restore the operation-per-COMPOUND limit, but increased to 200
for now. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/vaddr: do not repeat pte_offset_map_lock() until success
DAMON's virtual address space operation set implementation (vaddr) calls
pte_offset_map_lock() inside the page table walk callback function. This
is for reading and writing page table accessed bits. If
pte_offset_map_lock() fails, it retries by returning the page table walk
callback function with ACTION_AGAIN.
pte_offset_map_lock() can continuously fail if the target is a pmd
migration entry, though. Hence it could cause an infinite page table walk
if the migration cannot be done until the page table walk is finished.
This indeed caused a soft lockup when CPU hotplugging and DAMON were
running in parallel.
Avoid the infinite loop by simply not retrying the page table walk. DAMON
is promising only a best-effort accuracy, so missing access to such pages
is no problem. |
| In the Linux kernel, the following vulnerability has been resolved:
media: pci: mg4b: fix uninitialized iio scan data
Fix potential leak of uninitialized stack data to userspace by ensuring
that the `scan` structure is zeroed before use. |
| In the Linux kernel, the following vulnerability has been resolved:
most: usb: Fix use-after-free in hdm_disconnect
hdm_disconnect() calls most_deregister_interface(), which eventually
unregisters the MOST interface device with device_unregister(iface->dev).
If that drops the last reference, the device core may call release_mdev()
immediately while hdm_disconnect() is still executing.
The old code also freed several mdev-owned allocations in
hdm_disconnect() and then performed additional put_device() calls.
Depending on refcount order, this could lead to use-after-free or
double-free when release_mdev() ran (or when unregister paths also
performed puts).
Fix by moving the frees of mdev-owned allocations into release_mdev(),
so they happen exactly once when the device is truly released, and by
dropping the extra put_device() calls in hdm_disconnect() that are
redundant after device_unregister() and most_deregister_interface().
This addresses the KASAN slab-use-after-free reported by syzbot in
hdm_disconnect(). See report and stack traces in the bug link below. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/panthor: Fix kernel panic on partial unmap of a GPU VA region
This commit address a kernel panic issue that can happen if Userspace
tries to partially unmap a GPU virtual region (aka drm_gpuva).
The VM_BIND interface allows partial unmapping of a BO.
Panthor driver pre-allocates memory for the new drm_gpuva structures
that would be needed for the map/unmap operation, done using drm_gpuvm
layer. It expected that only one new drm_gpuva would be needed on umap
but a partial unmap can require 2 new drm_gpuva and that's why it
ended up doing a NULL pointer dereference causing a kernel panic.
Following dump was seen when partial unmap was exercised.
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000078
Mem abort info:
ESR = 0x0000000096000046
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x06: level 2 translation fault
Data abort info:
ISV = 0, ISS = 0x00000046, ISS2 = 0x00000000
CM = 0, WnR = 1, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=000000088a863000
[000000000000078] pgd=080000088a842003, p4d=080000088a842003, pud=0800000884bf5003, pmd=0000000000000000
Internal error: Oops: 0000000096000046 [#1] PREEMPT SMP
<snip>
pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : panthor_gpuva_sm_step_remap+0xe4/0x330 [panthor]
lr : panthor_gpuva_sm_step_remap+0x6c/0x330 [panthor]
sp : ffff800085d43970
x29: ffff800085d43970 x28: ffff00080363e440 x27: ffff0008090c6000
x26: 0000000000000030 x25: ffff800085d439f8 x24: ffff00080d402000
x23: ffff800085d43b60 x22: ffff800085d439e0 x21: ffff00080abdb180
x20: 0000000000000000 x19: 0000000000000000 x18: 0000000000000010
x17: 6e656c202c303030 x16: 3666666666646466 x15: 393d61766f69202c
x14: 312d3d7361203a70 x13: 303030323d6e656c x12: ffff80008324bf58
x11: 0000000000000003 x10: 0000000000000002 x9 : ffff8000801a6a9c
x8 : ffff00080360b300 x7 : 0000000000000000 x6 : 000000088aa35fc7
x5 : fff1000080000000 x4 : ffff8000842ddd30 x3 : 0000000000000001
x2 : 0000000100000000 x1 : 0000000000000001 x0 : 0000000000000078
Call trace:
panthor_gpuva_sm_step_remap+0xe4/0x330 [panthor]
op_remap_cb.isra.22+0x50/0x80
__drm_gpuvm_sm_unmap+0x10c/0x1c8
drm_gpuvm_sm_unmap+0x40/0x60
panthor_vm_exec_op+0xb4/0x3d0 [panthor]
panthor_vm_bind_exec_sync_op+0x154/0x278 [panthor]
panthor_ioctl_vm_bind+0x160/0x4a0 [panthor]
drm_ioctl_kernel+0xbc/0x138
drm_ioctl+0x240/0x500
__arm64_sys_ioctl+0xb0/0xf8
invoke_syscall+0x4c/0x110
el0_svc_common.constprop.1+0x98/0xf8
do_el0_svc+0x24/0x38
el0_svc+0x40/0xf8
el0t_64_sync_handler+0xa0/0xc8
el0t_64_sync+0x174/0x178 |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/sysfs: catch commit test ctx alloc failure
Patch series "mm/damon/sysfs: fix commit test damon_ctx [de]allocation".
DAMON sysfs interface dynamically allocates and uses a damon_ctx object
for testing if given inputs for online DAMON parameters update is valid.
The object is being used without an allocation failure check, and leaked
when the test succeeds. Fix the two bugs.
This patch (of 2):
The damon_ctx for testing online DAMON parameters commit inputs is used
without its allocation failure check. This could result in an invalid
memory access. Fix it by directly returning an error when the allocation
failed. |
| In the Linux kernel, the following vulnerability has been resolved:
tpm: tpm_vtpm_proxy: fix a race condition in /dev/vtpmx creation
/dev/vtpmx is made visible before 'workqueue' is initialized, which can
lead to a memory corruption in the worst case scenario.
Address this by initializing 'workqueue' as the very first step of the
driver initialization. |
| In the Linux kernel, the following vulnerability has been resolved:
mm: prevent poison consumption when splitting THP
When performing memory error injection on a THP (Transparent Huge Page)
mapped to userspace on an x86 server, the kernel panics with the following
trace. The expected behavior is to terminate the affected process instead
of panicking the kernel, as the x86 Machine Check code can recover from an
in-userspace #MC.
mce: [Hardware Error]: CPU 0: Machine Check Exception: f Bank 3: bd80000000070134
mce: [Hardware Error]: RIP 10:<ffffffff8372f8bc> {memchr_inv+0x4c/0xf0}
mce: [Hardware Error]: TSC afff7bbff88a ADDR 1d301b000 MISC 80 PPIN 1e741e77539027db
mce: [Hardware Error]: PROCESSOR 0:d06d0 TIME 1758093249 SOCKET 0 APIC 0 microcode 80000320
mce: [Hardware Error]: Run the above through 'mcelog --ascii'
mce: [Hardware Error]: Machine check: Data load in unrecoverable area of kernel
Kernel panic - not syncing: Fatal local machine check
The root cause of this panic is that handling a memory failure triggered
by an in-userspace #MC necessitates splitting the THP. The splitting
process employs a mechanism, implemented in
try_to_map_unused_to_zeropage(), which reads the pages in the THP to
identify zero-filled pages. However, reading the pages in the THP results
in a second in-kernel #MC, occurring before the initial memory_failure()
completes, ultimately leading to a kernel panic. See the kernel panic
call trace on the two #MCs.
First Machine Check occurs // [1]
memory_failure() // [2]
try_to_split_thp_page()
split_huge_page()
split_huge_page_to_list_to_order()
__folio_split() // [3]
remap_page()
remove_migration_ptes()
remove_migration_pte()
try_to_map_unused_to_zeropage() // [4]
memchr_inv() // [5]
Second Machine Check occurs // [6]
Kernel panic
[1] Triggered by accessing a hardware-poisoned THP in userspace, which is
typically recoverable by terminating the affected process.
[2] Call folio_set_has_hwpoisoned() before try_to_split_thp_page().
[3] Pass the RMP_USE_SHARED_ZEROPAGE remap flag to remap_page().
[4] Try to map the unused THP to zeropage.
[5] Re-access pages in the hw-poisoned THP in the kernel.
[6] Triggered in-kernel, leading to a panic kernel.
In Step[2], memory_failure() sets the poisoned flag on the page in the THP
by TestSetPageHWPoison() before calling try_to_split_thp_page().
As suggested by David Hildenbrand, fix this panic by not accessing to the
poisoned page in the THP during zeropage identification, while continuing
to scan unaffected pages in the THP for possible zeropage mapping. This
prevents a second in-kernel #MC that would cause kernel panic in Step[4].
Thanks to Andrew Zaborowski for his initial work on fixing this issue. |
