| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: bsg: Fix TOCTOU in io_uring passthrough command setup
scsi_bsg_uring_cmd() reads bsg_uring_cmd from the shared mmap'd SQE.
Userspace can change a field after we check it and before we use it.
request_len is the sharp case: it can grow past sizeof(scmd->cmnd) after
the bound check and overflow scmd->cmnd in copy_from_user().
READ_ONCE() the SQE fields we check or use into locals before use. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: megaraid_sas: Limit NVMe request size to the PRP chain frame
megasas_make_prp_nvme() builds a command's PRP list in cmd->sg_frame, a
DMA pool buffer of instance->max_chain_frame_sz bytes, spending one
entry per NVMe page of the transfer plus one per page of the buffer for
the chain pointer. The loop runs until the transfer is described and
never checks the buffer bound.
max_hw_sectors comes straight from the MDTS the firmware reports for the
drive. On drives with a large MDTS the only thing keeping the list
inside the buffer was the block layer default of 1280 KiB, which needs
320 entries, which fit into a 4 KiB frame as that holds 512. But since
commit 9b8b84879d4a ("block: Increase BLK_DEF_MAX_SECTORS_CAP") that
default is 4 MiB, and such a transfer needs 1025 entries, so the list
runs a full page past the end of the frame:
sd 1:0:1:0: [sdb] tag#630 page boundary ptr_sgl: 0x00000000ba62d13f
BUG: unable to handle page fault for address: ff663bcb81e7c000
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
RIP: 0010:megasas_build_and_issue_cmd_fusion+0xeaa/0x1870 [megaraid_sas]
If the page after the frame happens to be mapped, the overrun does not
fault but silently corrupts the neighbouring pool entry, which is
another in-flight command's PRP list.
Cap max_hw_sectors at what the chain frame can describe, less one page
for transfers that do not start on a page boundary and so need one entry
more. This is the megaraid_sas counterpart of commit 04631f55afc5
("scsi: mpt3sas: Limit NVMe request size to 2 MiB"), but derives the
limit from max_chain_frame_sz rather than hardcoding it. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: pm8001: Use rollback index when freeing MSI-X vectors
pm8001_request_msix() unwinds previously registered handlers with
free_irq() when request_irq() fails. The rollback loop uses the failing
index i for every iteration instead of the already registered vector
index j.
That passes the wrong IRQ/dev_id pair to free_irq() and leaves the
earlier handlers installed. Use j for both pci_irq_vector() and the
matching irq_vector entry in the rollback loop. |
| In the Linux kernel, the following vulnerability has been resolved:
samples/damon/mtier: handle damon_stop() failure
damon_sample_mtier_stop() assumes its damon_stop() call will always
successfully stops the two DAMON contexts. Hence it deallocates the two
DAMON contexts after the damon_stop() call. However, if a given context
is already stopped, damon_stop() fails and returns an error while letting
the DAMON contexts that have not yet stopped keep running. This kind of
unexpected early DAMON context stops could happen due to memory allocation
failures in kdamond_fn(). Because damon_sample_mtier_stop() just
deallocates all DAMON contexts with damon_target and damon_region objects
that are linked to the contexts, the execution of the unstopped DAMON
context (kdamond) ends up using the memory that freed (use-after-free).
Fix the issue by separating the damon_stop() to be invoked per context.
Note that DAMON_SYSFS also allows multiple DAMON contexts execution. But,
it calls damon_stop() for each context one by one. Hence this issue is
only in mtier.
For the long term, it would be better to refactor damon_stop() to always
ensure stopping all contexts regardless of the failures in the middle.
Make this fix in the current way, though, to keep it simple and easy to
backport. I will do the refactoring later.
The issue was discovered [1] by Sashiko. |
| In the Linux kernel, the following vulnerability has been resolved:
samples/damon/wsse: handle damon_start() failure
Patch series "samples/damon: handle damon_{start,stop}() failures".
All DAMON sample modules are not correctly handling failures from
damon_start(). Among those, mtier also has an additional problem for
handling of damon_stop() failures. wsse and prcl also have a problem in
their damon_call() failure handling. As a result, memory leaks, next
DAMON operation disruptions, and use-after-free can happen. Fix those.
Note that only the damon_start() failure caused issues can reliably be
reproduced. Reproducing those issues require the admin permission,
though.
This patch (of 6):
damon_sample_wsse_start() callers assume it will clean up resources when
it fails. And the function does the cleanup for context buildup failures.
However, it is not doing the cleanup for damon_start() failure. As a
result, when damon_start() fails, it leaks the memory for DAMON context.
Free the context in case of the failure to fix the issues.
Note that the issue can reliably be reproduced because the module calls
damon_start() in the exclusive mode. For example,
$ sudo damo start
$ echo $$ | sudo tee /sys/module/damon_sample_wsse/parameters/target_pid
$ echo Y | sudo tee /sys/module/damon_sample_wsse/parameters/enabled
$ sudo cat /proc/allocinfo | grep damon_new_ctx
Because the first command is running another DAMON instance, the third
command fails the damon_start() call because the new DAMON instance cannot
exclusively run. And without this fix, by repeating the third and the
fourth commands above, we can show the memory consumption is only
increasing due to the leaks. It requires the sudo permission though.
The issue was discovered [1] by Sashiko. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/core: handle region split failure in apply_min_nr_regions()
damon_apply_min_nr_regions() repeatedly split each region until its size
becomes small enough to meet the user-defined low limit of the number of
regions. The loop assumes the split operation (damon_split_region_at())
will always succeed and create the new region. But the operation could
silently fail for memory allocation failures, for example.
If such failure happens and the region was the last region, the linked
list-based next region fetching returns invalid pointer. As a result,
invalid memory dereference and corruption could happen. Even if the
corner case is handled, it imposes stress to the allocator by trying split
regions for other targets. Fix the issue by breaking all the loops for
any region split failure.
This means there could be a min_nr_regions violation. It will only rarely
happen since the allocation is arguably too small to fail. Even if it
happens, it is only temporal. damon_apply_min_nr_regions() will be called
again after the aggregation interval.
The user impact of the issue should be minor, since the allocation is
arguably too small to fail. But, it could still theoretically happen, and
the consequence is very bad.
This issue was discovered [1] by Sashiko. |
| In the Linux kernel, the following vulnerability has been resolved:
futex: Prevent rcuwait use-after-free during requeue PI
On PREEMPT_RT, FUTEX_CMP_REQUEUE_PI can trigger a KASAN report
(slab-out-of-bounds) in futex_requeue_pi_complete() invocation of
rcuwait_wake_up().
The futex_q used by futex_wait_requeue_pi() is allocated on the waiter's
stack. An early wakeup can race with a PI requeue as follows:
waiter requeue task
------ ------------
futex_wait_requeue_pi()
futex_do_wait()
schedule()
futex_requeue
futex_proxy_trylock_atomic()
futex_requeue_pi_prepare()
Q_REQUEUE_PI_NONE -> Q_REQUEUE_PI_IN_PROGRESS
* timeout/ signal wakes waiter *
futex_requeue_pi_wakeup_sync()
Q_REQUEUE_PI_IN_PROGRESS -> Q_REQUEUE_PI_WAIT
requeue_pi_wake_futex
futex_requeue_pi_complete()
cmpxchg Q_REQUEUE_PI_WAIT -> Q_REQUEUE_PI_LOCKED
rcuwait_wait_event()
if (atomic_read(&q->requeue_state) != Q_REQUEUE_PI_WAIT)
break /* no schedule() */
/* q.pi_state->owner == current */
futex_private_hash_put()
/* return from syscall */
rcuwait_wake_up(&q->requeue_wait)
/* q is gone */
futex_requeue_pi_complete() publishes Q_REQUEUE_PI_LOCKED before
calling rcuwait_wake_up(). The waiter observes this state in
rcuwait_wait_event() before invoking schedule() in rcuwait_wait_event().
Here, the waiter is free leave the syscall before requeue task can
complete the wake.
To address this race skip rcuwait_wake_up() in the Q_REQUEUE_PI_LOCKED
case.
This state is only published by requeue_pi_wake_futex(), which saves
q->task before futex_requeue_pi_complete() and wakes the waiter via
wake_up_state().
This wake is intended to wake the waiter from its futex_do_wait() sleep.
If the waiter is still sleeping there, it can not get into the
Q_REQUEUE_PI_WAIT state (and require this removed wake).
Should the waiter be woken up from futex_do_wait() by other means (as in
this example) and sleep in futex_requeue_pi_wakeup_sync() then the
wake_up_state() from requeue_pi_wake_futex() will wake it, too.
Should the waiter task terminate before wake_up_state() had a chance to
wake the task then the task pointer does not become invalid because the
futex_hash_bucket::lock is held and the task pointer is RCU protected.
[bigeasy: Updated comment and commit message] |
| In the Linux kernel, the following vulnerability has been resolved:
ftrace: Take trace_array reference before accessing its ftrace_ops
The trace instance files set_ftrace_filter and set_ftrace_notrace was
updated to work with specific trace instances (trace_arrays). The issue is
that when these files are opened, there is a small race window where it
will use the ftrace_ops from the inode->private pointer to get a reference
to the trace_array and then take its reference. The problem is that the
ftrace_ops itself could be freed. If the rmdir on the instance happens at
the same time the set_ftrace_filter file is opened, the rmdir could have
also freed the ftrace_ops and referencing it will cause a use-after-free
bug and crash the kernel.
Instead, pass in the trace_array as the file private data (NULL for the
top level instance), and then pass both the trace_array and the ftrace_ops
to the ftrace_regex_open() function. If the trace_array is NULL, then it
just uses the ftrace_ops without the need to take its reference (like
normal). If the ftrace_ops is NULL, that is only the case for the top
level instance and the global_ops can be used.
This allows the trace_array to have its reference incremented before
touching the ftrace_ops that could also be freed when the instance is. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: bpf: serialize device reference release in struct_ops destroy path
__hid_bpf_ops_destroy_device() and hid_bpf_unreg() can race on the
same registration reference, double-putting struct hid_device and
freeing it while hid_destroy_device() still uses it. Serialize the
remove/NULL decision under hdev->bpf.prog_list_lock so exactly one
path releases each registration reference: unreg re-checks ops->hdev
under the lock and returns without putting when the destroy path
already cleared it; all put_device() calls happen after the lock is
dropped, which is safe because a concurrent unreg then observes
ops->hdev == NULL under the lock.
Background: each successful attach (hid_bpf_ops_reg) acquires one
device reference (hid_get_device()). Two paths can release it:
- device destruction: hid_destroy_device() -> hid_bpf_destroy_device()
-> __hid_bpf_ops_destroy_device(), which walks hdev->bpf.prog_list
under rcu_read_lock() and drops one reference per attached program;
- BPF link release: bpf map delete (no BPF_F_LINK) synchronously calls
st_ops->unreg() -> hid_bpf_unreg(), which drops the reference for
its own registration.
The coordination handshake (e->hdev = NULL on the destroy side vs
"if (!hdev) return" on the unreg side) is a TOCTOU check: the two
paths run under different lock domains (rcu_read_lock vs
prog_list_lock), so a concurrent unreg can read ops->hdev as
non-NULL, block on prog_list_lock, and then proceed while the
destroy traversal executes - both paths then drop the same
reference. The refcount reaches zero legitimately (each decrement
is individually valid), so no refcount_t saturation fires: the
device is simply freed while the transport is still inside
hid_destroy_device(), and subsequent teardown touches freed memory.
The fix serializes the remove/NULL decision under prog_list_lock on
both sides and moves the destroy-side puts outside the lock. With
the lock held, plain reads/writes of ops->hdev are sufficient; no
READ_ONCE/WRITE_ONCE are added, keeping the patch minimal.
Unlocked-read safety: the unlocked read of ops->hdev at the top of
hid_bpf_unreg() cannot touch a freed device, because the unreg path
itself still holds this registration's reference (released only by
its own hid_put_device() after the lock is dropped), and a destroy
traversal that already cleared ops->hdev makes the lock-internal
re-check return early without any put. At most one of the two
paths releases each registration reference. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: rmi: fix OOB access with undersized RMI reports
The hid-rmi driver sizes its writeReport/readReport buffer purely from
the report descriptor supplied by the device, with no minimum bound:
data->input_report_size = hid_report_len(input_report);
data->output_report_size = hid_report_len(output_report);
alloc_size = data->output_report_size + data->input_report_size;
data->writeReport = devm_kzalloc(&hdev->dev, alloc_size, GFP_KERNEL);
data->readReport = data->writeReport + data->output_report_size;
but then reads and writes fixed offsets into it. A device declaring a
1-byte output and a 1-byte input report makes hid_report_len() return 2
for each, so alloc_size is 4, while rmi_set_page() -- reached
unconditionally at probe time through rmi_input_configured() -- stores
writeReport[4] and rmi_hid_read_block() stores writeReport[0..5]. Since
readReport lives at writeReport + output_report_size, those stores also
corrupt the window the next reply is parsed out of.
The read path is worse: the copy length comes from readReport[1], which
the device fills in and can be up to 255, and the copy starts at
&readReport[2] with no regard for input_report_size, so it runs past the
end of the allocation into adjacent slab objects. This does not even
need a lying device -- rmi_f01_probe() issues a fixed 21-byte register
read, so any device declaring an input report smaller than 23 bytes
reads out of bounds even when it answers truthfully. Those bytes become
the register values the RMI core acts on: rmi_f01_probe() prints them to
the kernel log as the product id and exports them through the mode 0444
sysfs attribute of the same name, and rmi_driver_set_irq_bits() sends
them back to the device as the interrupt mask, so an undersized report
descriptor leaks heap contents both to unprivileged userspace and to the
device itself.
The write path has no bound either: rmi_hid_write_block() copies an
unbounded len to &writeReport[4], and the largest caller a device can
drive at probe time is rmi_driver_set_irq_bits(), whose length is
derived from the interrupt source counts the device declares in its Page
Description Table.
Finally, the read loop cannot terminate on a zero-length reply: such a
reply copies nothing and advances neither bytes_read nor bytes_needed,
and because a reply did arrive the one second wait_event_timeout() does
not fire either, so a device answering 0 forever keeps the loop running
inside the probe worker with page_mutex held. khungtaskd does not
notice, because every reply wakes the task.
Reject reports too small for what the driver builds -- 6 output bytes
for the write reports and 3 input bytes for the read handshake -- at
probe time, clamp the write and the read copy to the report sizes the
device declared, and treat a zero-length reply as an error. A device
refused this way is started as an ordinary HID device, like one that
does not carry the RMI report ids at all.
RMI_DEVICE must not be left set in device_flags on that path, because
rmi_input_configured() would then run the RMI setup and reach
rmi_set_page(), which writes the writeReport buffer the refusal just
skipped allocating. The bit can arrive set: rmi_probe() copies
id->driver_data into device_flags before the report checks, and a bind
through the new_id sysfs attribute can supply driver_data with
RMI_DEVICE (BIT(0)) set. Strip the bit where driver_data is copied, so
RMI_DEVICE keeps meaning exactly "this probe validated the reports"; the
three jumps to start that predate this patch are covered as well.
The error path also clears RMI_READ_DATA_PENDING on its way out, because
that flag is what the wait at the top of the loop tests: leaving it set
would make every later wait_event_timeout() return immediately on the
stale reply and kill the read path for the rest of the device's life.
Clamping does not regress working hardware: the read loop already
handles
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
HID: wacom: validate report length in wacom_intuos_pro2_bt_irq
wacom_intuos_pro2_bt_irq() receives the wire report length in `len`
but never consults it before parsing. After the report-id gate it
unconditionally calls wacom_intuos_pro2_bt_pen() and then, selected by
features.type, a fixed chain of sub-parsers, none of which receive
`len`:
wacom_intuos_pro2_bt_pen(wacom);
if (type == INTUOSP2_BT || type == INTUOSP2S_BT) {
wacom_intuos_pro2_bt_touch(wacom);
wacom_intuos_pro2_bt_pad(wacom);
wacom_intuos_pro2_bt_battery(wacom);
} else {
wacom_intuos_gen3_bt_pad(wacom);
wacom_intuos_gen3_bt_battery(wacom);
}
Each sub-parser dereferences wacom->data at fixed offsets. The furthest
byte touched on each branch is:
INTUOSP2_BT / INTUOSP2S_BT: wacom_intuos_pro2_bt_pad() reads data[285]
(the touchring byte), so the report must be at least 286 bytes;
INTUOSHT3_BT ("gen3"): wacom_intuos_gen3_bt_battery() reads data[45],
so the report must be at least 46 bytes.
features.type is selected from the VID/PID id_table entry and
wacom_setup_device_quirks() force-registers the pen/pad/touch inputs
for that type independent of the report descriptor, so a malicious or
malfunctioning paired/spoofed Bluetooth peripheral can advertise that
VID/PID and send an undersized report that still satisfies the
data[0] == 0x80/0x81 gate. The driver then reads past the received
report and forwards the bytes to userspace via evdev (MSC_SERIAL /
ABS_MISC / ABS_WHEEL on the pen and pad input nodes), an out-of-bounds
read with a concrete userspace read-back channel, and a true
out-of-bounds read on transports whose backing buffer is sized to the
(small) report descriptor rather than a fixed-size staging buffer.
This is the same class of bug commit 2f1763f62909 ("HID: wacom: fix
out-of-bounds read in wacom_intuos_bt_irq") already hardened in the
sibling wacom_intuos_bt_irq(), which guards each report id against its
minimum length before parsing.
Guard wacom_intuos_pro2_bt_irq() the same way: before parsing, reject
reports shorter than the furthest offset the selected branch actually
dereferences, warn, and bail out. Because the whole pen/touch/pad/
battery chain runs unconditionally per branch, a single up-front check
against the maximum offset (286 bytes for INTUOSP2_BT/INTUOSP2S_BT,
46 bytes for the gen3 branch) bounds every sub-parser. Returning 0 on
a short report also skips those calls for the same malformed report,
which is the safe, conservative behavior. |
| In the Linux kernel, the following vulnerability has been resolved:
dm: fix race when loading and unloading a table
If the userspace calls two concurrent table load ioctls and one of them
succeeds and the other fails, there is a race condition because
dm_setup_md_queue walks &md->table_devices without any lock. If the walk
races with dm_table_destroy -> free_devices -> dm_put_table_device, there
is access to invalid memory.
Fix this race by extending the lock over the list walk. |
| In the Linux kernel, the following vulnerability has been resolved:
dm: fix resume-vs-remove race
If the user issues the resume ioctl and the remove ioctl at the same
time, it may be possible that the device is resumed after it is suspended
in __dm_destroy. The result is that the table is destroyed without
calling the postsuspend method.
Dm targets expect that they may be removed only after the postsuspend
method method was called. If we break this expectation, it can cause
misbehavior in various targets. For example - in the dm-integrity target,
the reboot notifier is not unregistered, leading to use-after-free.
Fix this bug by refusing to resume if the device is being destroyed. |
| In the Linux kernel, the following vulnerability has been resolved:
dma-buf: dma-heap: don't publish fd before copy_to_user() succeeds
DMA_HEAP_IOCTL_ALLOC allocates a dma-buf and installs an fd into the
caller's fd table via dma_buf_fd() -> fd_install() before
dma_heap_ioctl() copies the result back to userspace. If the trailing
copy_to_user() fails, userspace never learns the fd number, but the
fd (and the underlying dma-buf reference) are already visible to
other threads in the same process and are leaked for the lifetime of
the process.
The obvious "close it on the failure path" fix is unsafe: once
fd_install() has run, another thread can already dup() the fd, send
it via SCM_RIGHTS, or close() it and let its number be reused, so a
subsequent close_fd() from the ioctl path can operate on an unrelated
file. This was pointed out by Christian König on v1 [1].
Restructure the allocation path so that fd_install() is the last,
unfailable step of a successful ioctl:
1. heap->ops->allocate() creates the dma_buf.
2. get_unused_fd_flags() reserves an fd number in the caller's
fd table without publishing it, so
no other thread can observe it.
3. copy_to_user() delivers the fd number to userspace;
on failure the fd is returned with
put_unused_fd() and the dma_buf
reference is dropped with
dma_buf_put(), leaving no user-
visible state behind.
4. dma_buf_fd_install() publishes the fd and emits the
trace_dma_buf_fd tracepoint -- from
here on the ioctl cannot fail.
A new dma_buf_fd_install() helper is introduced in dma-buf.c to wrap
fd_install() together with the DMA_BUF_TRACE() call, preserving the
export tracing that dma_buf_fd() provides. dma_heap_ioctl_allocate()
is refactored to return the struct dma_buf * directly (returning
ERR_PTR on failure) so the caller holds the dmabuf reference across
steps 3 and 4.
The failure at step 3 is easily reachable from userspace: pass a
struct dma_heap_allocation_data that lives in a page whose protection
is flipped to PROT_READ between copy_from_user() and copy_to_user()
(e.g. via mprotect()). Before this change each such ioctl leaks one
dmabuf fd; after it, the fd table is unchanged on failure and only
/dev/dma_heap/<name> remains open.
No UAPI or heap-driver interface change.
[1] https://lore.kernel.org/dri-devel/175e98de-f414-47d7-81c1-c0fe0a8f7f62@amd.com/ |
| In the Linux kernel, the following vulnerability has been resolved:
dma-direct: return struct page from dma_direct_alloc_from_pool()
Commit 5b138c534fda ("dma-direct: factor out a dma_direct_alloc_from_pool
helper") changed dma_direct_alloc_from_pool() to return the CPU address
from dma_alloc_from_pool(). That fits dma_direct_alloc(), but
dma_direct_alloc_pages() also uses the helper and expects a struct page *.
Fix this by making dma_direct_alloc_from_pool() return the struct page *
again, and pass the CPU address back through an out-parameter for the
dma_direct_alloc() caller. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: fsl-edma: tracing: no ptr dereference during log output
The fsl edma events store a pointer to a struct fsl_edma_engine in the
ringbuffer and dereference it when a log entry is printed. At this time,
the pointer may no longer be valid.
Event injection can be used to trigger a crash:
$ cd /sys/kernel/tracing
$ echo 'value = 0' > events/fsl_edma/edma_writeb/inject
$ cat trace
The log output needs only edma->membase. Add a membase field at the end
of the event and use the new field for log output. Keep the existing
fields for backward compatibility. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: dw-edma: Initialize IRQ data before requesting IRQs
dw_edma_irq_request() passes struct dw_edma_irq to request_irq() before
dw_edma_channel_setup() fills the back pointer. A shared interrupt can
therefore enter the handler with dw_irq->dw still NULL, leading to a
NULL pointer dereference.
Set the back pointer before installing each handler. |
| In the Linux kernel, the following vulnerability has been resolved:
cpuidle: dt_idle_genpd: kfree() the original name allocation
dt_idle_pd_alloc() kasprintf()s the full node path, then points
pd->name at kbasename() of that string. dt_idle_pd_free() kfree()s
pd->name, which is no longer the start of the allocation.
Copy the basename instead. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix infinite loop in pcpu_freelist push with one possible CPU
__pcpu_freelist_push() can loop forever when only one CPU is possible
and an NMI re-enters pcpu_freelist_push() while the interrupted context
holds that CPU's freelist lock.
After the current-CPU fast path fails, the fallback loop walks
cpu_possible_mask while skipping the current CPU. With CONFIG_SMP=n, or
when an SMP kernel is limited to one possible CPU with nr_cpus=1 or
possible_cpus=1, there are no other possible CPUs to examine. The loop
therefore makes no lock acquisition attempt and can never make progress.
The following stack was observed on a UP system:
NMI context:
pcpu_freelist_push
free_htab_elem
htab_map_delete_elem
[perf-event BPF program]
__perf_event_overflow
perf_event_nmi_handler
exc_nmi
Interrupted context:
__pcpu_freelist_push
pcpu_freelist_push
free_htab_elem
htab_map_delete_elem
[raw_tp/sys_enter BPF program]
__bpf_trace_sys_enter
do_syscall_64
raw_res_spin_lock() detects the same-CPU recursive acquisition and
returns -EDEADLK, but the subsequent fallback loop has no candidate head
on a system with one possible CPU.
Restore the extra fallback head that existed before the rqspinlock
conversion. Keep the current-CPU fast path, then try the other possible
CPUs and finally the extra head. The additional head lets a push, which
cannot fail without losing a preallocated element, make progress when the
only per-CPU head is held by the interrupted context.
Also check the extra head from the pop path so that nodes placed there
can be reused. |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: lock mutex in ceph_mds_check_access()
MDS session OPEN handling replaces mdsc->s_cap_auths under
mdsc->mutex, freeing the previous array and its strings.
ceph_mds_check_access() traverses this array without holding the
mutex. A concurrent session reopen can therefore free the array while
it is being inspected, resulting in a use-after-free like this:
Unable to handle kernel paging request at virtual address 003aaad64b2c8bb9
[...]
Internal error: Oops: 0000000096000004 [#1] SMP
Modules linked in:
CPU: 56 UID: 2953037534 PID: 1253231 Comm: php-cgi8.4 Not tainted 6.18.45-i2-ampere #1146 NONE
[..]
pc : ceph_mds_check_access+0xd4/0x550
lr : ceph_mds_check_access+0xc8/0x550
[...]
Call trace:
ceph_mds_check_access+0xd4/0x550 (P)
ceph_atomic_open+0x138/0xbe8
path_openat+0xa24/0xfa8
do_filp_open+0x94/0x158
do_sys_openat2+0x88/0xf8 |
