| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: require 3 sub-authorities before reading sub_auth[2]
parse_dacl() compares each ACE SID against sid_unix_NFS_mode and on
match reads sid.sub_auth[2] as the file mode. If sid_unix_NFS_mode is
the prefix S-1-5-88-3 with num_subauth = 2 then compare_sids() compares
only min(num_subauth, 2) sub-authorities so a client SID with
num_subauth = 2 and sub_auth = {88, 3} will match.
If num_subauth = 2 and the ACE is placed at the very end of the security
descriptor, sub_auth[2] will be 4 bytes past end_of_acl. The
out-of-band bytes will then be masked to the low 9 bits and applied as
the file's POSIX mode, probably not something that is good to have
happen.
Fix this up by forcing the SID to actually carry a third sub-authority
before reading it at all. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: handle invalid dinode in ocfs2_group_extend
[BUG]
kernel BUG at fs/ocfs2/resize.c:308!
Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI
RIP: 0010:ocfs2_group_extend+0x10aa/0x1ae0 fs/ocfs2/resize.c:308
Code: 8b8520ff ffff83f8 860f8580 030000e8 5cc3c1fe
Call Trace:
...
ocfs2_ioctl+0x175/0x6e0 fs/ocfs2/ioctl.c:869
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
__se_sys_ioctl fs/ioctl.c:583 [inline]
__x64_sys_ioctl+0x197/0x1e0 fs/ioctl.c:583
x64_sys_call+0x1144/0x26a0 arch/x86/include/generated/asm/syscalls_64.h:17
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x93/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x76/0x7e
...
[CAUSE]
ocfs2_group_extend() assumes that the global bitmap inode block
returned from ocfs2_inode_lock() has already been validated and
BUG_ONs when the signature is not a dinode. That assumption is too
strong for crafted filesystems because the JBD2-managed buffer path
can bypass structural validation and return an invalid dinode to the
resize ioctl.
[FIX]
Validate the dinode explicitly in ocfs2_group_extend(). If the global
bitmap buffer does not contain a valid dinode, report filesystem
corruption with ocfs2_error() and fail the resize operation instead of
crashing the kernel. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: validate p_idx bounds in ext4_ext_correct_indexes
ext4_ext_correct_indexes() walks up the extent tree correcting
index entries when the first extent in a leaf is modified. Before
accessing path[k].p_idx->ei_block, there is no validation that
p_idx falls within the valid range of index entries for that
level.
If the on-disk extent header contains a corrupted or crafted
eh_entries value, p_idx can point past the end of the allocated
buffer, causing a slab-out-of-bounds read.
Fix this by validating path[k].p_idx against EXT_LAST_INDEX() at
both access sites: before the while loop and inside it. Return
-EFSCORRUPTED if the index pointer is out of range, consistent
with how other bounds violations are handled in the ext4 extent
tree code. |
| XX-Net V5.16.6 contains a WebSocket frame parsing vulnerability in the WebSocket_receive_worker routine of simple_http_server.py that allows attackers to cause corrupted application data by sending unmasked WebSocket frames. The server unconditionally reads 4 bytes as a masking key regardless of whether the MASK bit is set in the frame header, causing the first 4 bytes of payload to be consumed as a mask key and the remaining payload to be incorrectly XOR-decoded, resulting in data corruption alongside missing RSV bit, opcode, and FIN fragmentation validations. |
| Insufficient validation of untrusted input in ANGLE in Google Chrome prior to 148.0.7778.216 allowed a remote attacker to execute arbitrary code via a crafted HTML page. (Chromium security severity: High) |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mana: Remove user triggerable WARN_ON() in mana_ib_create_qp_rss()
Sashiko points out that the user can specify WQs sharing the same CQ as a
part of the uAPI and this will trigger the WARN_ON() then go on to corrupt
the kernel.
Just reject it outright and fail the QP creation. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix rxkad crypto unalignment handling
Fix handling of a packet with a misaligned crypto length. Also handle
non-ENOMEM errors from decryption by aborting. Further, remove the
WARN_ON_ONCE() so that it can't be remotely triggered (a trace line can
still be emitted). |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/uverbs: Validate wqe_size before using it in ib_uverbs_post_send
ib_uverbs_post_send() uses cmd.wqe_size from userspace without any
validation before passing it to kmalloc() and using the allocated
buffer as struct ib_uverbs_send_wr.
If a user provides a small wqe_size value (e.g., 1), kmalloc() will
succeed, but subsequent accesses to user_wr->opcode, user_wr->num_sge,
and other fields will read beyond the allocated buffer, resulting in
an out-of-bounds read from kernel heap memory. This could potentially
leak sensitive kernel information to userspace.
Additionally, providing an excessively large wqe_size can trigger a
WARNING in the memory allocation path, as reported by syzkaller.
This is inconsistent with ib_uverbs_unmarshall_recv() which properly
validates that wqe_size >= sizeof(struct ib_uverbs_recv_wr) before
proceeding.
Add the same validation for ib_uverbs_post_send() to ensure wqe_size
is at least sizeof(struct ib_uverbs_send_wr). |
| In the Linux kernel, the following vulnerability has been resolved:
net: wwan: t7xx: validate port_count against message length in t7xx_port_enum_msg_handler
t7xx_port_enum_msg_handler() uses the modem-supplied port_count field as
a loop bound over port_msg->data[] without checking that the message buffer
contains sufficient data. A modem sending port_count=65535 in a 12-byte
buffer triggers a slab-out-of-bounds read of up to 262140 bytes.
Add a sizeof(*port_msg) check before accessing the port message header
fields to guard against undersized messages.
Add a struct_size() check after extracting port_count and before the loop.
In t7xx_parse_host_rt_data(), guard the rt_feature header read with a
remaining-buffer check before accessing data_len, validate feat_data_len
against the actual remaining buffer to prevent OOB reads and signed
integer overflow on offset.
Pass msg_len from both call sites: skb->len at the DPMAIF path after
skb_pull(), and the validated feat_data_len at the handshake path. |
| A flaw was found in Keycloak. A remote attacker with high privileges, such as a realm administrator configuring a malicious Lightweight Directory Access Protocol (LDAP) server or an attacker compromising an upstream LDAP server, could exploit this vulnerability. By sending a malformed LDAP password policy response during a password authentication request, the attacker can trigger an OutOfMemoryError. This causes the Keycloak Java Virtual Machine (JVM) to terminate, leading to a denial of service (DoS) for all realms on the affected node. |
| Insufficient validation of untrusted input in OptimizationGuide in Google Chrome prior to 148.0.7778.216 allowed a remote attacker who had compromised the renderer process to perform UI spoofing via a crafted HTML page. (Chromium security severity: High) |
| Insufficient validation of untrusted input in USB in Google Chrome prior to 148.0.7778.216 allowed a remote attacker to execute arbitrary code via a crafted HTML page. (Chromium security severity: Medium) |
| Hono is a Web application framework that provides support for any JavaScript runtime. Prior to 4.12.21, the ip-restriction middleware (hono/ip-restriction) compares incoming IP addresses against configured deny and allow rules using string equality after partial normalization. Non-canonical IPv6 representations of an address already listed in a static rule — such as compressed forms, explicit-zero forms, or hex-notation IPv4-mapped addresses — do not match the normalized rule entry, causing the rule to be silently skipped. This vulnerability is fixed in 4.12.21. |
| Hono is a Web application framework that provides support for any JavaScript runtime. Prior to 4.12.21, the serialize() function in hono/cookie validates domain and path options against characters that corrupt Set-Cookie header syntax (;, \r, \n), but does not apply the same validation to sameSite and priority. An application that passes user-controlled input into either option may produce a Set-Cookie response header containing attacker-chosen additional attributes. This vulnerability is fixed in 4.12.21. |
| Insufficient validation of untrusted input in WebAppInstalls in Google Chrome on Android prior to 148.0.7778.216 allowed a local attacker to execute arbitrary code via a malicious file. (Chromium security severity: High) |
| Insufficient validation of untrusted input in UI in Google Chrome on Mac prior to 148.0.7778.216 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: Critical) |
| Improper Validation of Specified Quantity in Input vulnerability in Ads by WPQuads Ads by WPQuads quick-adsense-reloaded allows Input Data Manipulation.This issue affects Ads by WPQuads: from n/a through <= 3.0.2. |
| Improper Validation of Specified Quantity in Input vulnerability in Ads by WPQuads Ads by WPQuads quick-adsense-reloaded allows Manipulating Hidden Fields.This issue affects Ads by WPQuads: from n/a through <= 3.0.2. |
| The ToASCII and ToUnicode functions incorrectly accept Punycode-encoded labels that decode to an ASCII-only label. For example, ToUnicode("xn--example-.com") incorrectly returns the name "example.com" rather than an error. This behavior can lead to privilege escalation in programs using the idna package. For example, a program which performs privilege checks on the ASCII hostname may reject "example.com" but permit "xn--example-.com". If that program subsequently converts the ASCII hostname to Unicode, it will inadvertently permits access to the Unicode name "example.com". |
| In the Linux kernel, the following vulnerability has been resolved:
hfsplus: fix uninit-value by validating catalog record size
Syzbot reported a KMSAN uninit-value issue in hfsplus_strcasecmp(). The
root cause is that hfs_brec_read() doesn't validate that the on-disk
record size matches the expected size for the record type being read.
When mounting a corrupted filesystem, hfs_brec_read() may read less data
than expected. For example, when reading a catalog thread record, the
debug output showed:
HFSPLUS_BREC_READ: rec_len=520, fd->entrylength=26
HFSPLUS_BREC_READ: WARNING - entrylength (26) < rec_len (520) - PARTIAL READ!
hfs_brec_read() only validates that entrylength is not greater than the
buffer size, but doesn't check if it's less than expected. It successfully
reads 26 bytes into a 520-byte structure and returns success, leaving 494
bytes uninitialized.
This uninitialized data in tmp.thread.nodeName then gets copied by
hfsplus_cat_build_key_uni() and used by hfsplus_strcasecmp(), triggering
the KMSAN warning when the uninitialized bytes are used as array indices
in case_fold().
Fix by introducing hfsplus_brec_read_cat() wrapper that:
1. Calls hfs_brec_read() to read the data
2. Validates the record size based on the type field:
- Fixed size for folder and file records
- Variable size for thread records (depends on string length)
3. Returns -EIO if size doesn't match expected
For thread records, check against HFSPLUS_MIN_THREAD_SZ before reading
nodeName.length to avoid reading uninitialized data at call sites that
don't zero-initialize the entry structure.
Also initialize the tmp variable in hfsplus_find_cat() as defensive
programming to ensure no uninitialized data even if validation is
bypassed. |
