| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Server-Side Request Forgery (CWE-918) in Kibana allows authenticated users with connector management privileges to bypass the operator-configured connection allowlist. By configuring a Webhook connector with a crafted target, an attacker can cause Kibana to issue outbound requests to destinations that the egress restriction controls were intended to block. |
| Server-Side Request Forgery (CWE-918) in Kibana can allow an authenticated user with connector management privileges to bypass the operator-configured connector allowlist, causing the Kibana server to issue outbound requests to destinations the egress controls were intended to block. |
| A security vulnerability has been detected in Aider-AI Aider 0.86.3. This affects the function requests.get of the file api_docs.py of the component AWS EC2 Metadata Endpoint. The manipulation leads to server-side request forgery. The attack is possible to be carried out remotely. The exploit has been disclosed publicly and may be used. It is suggested to install a patch to address this issue. The pull request to fix this issue awaits acceptance. |
| A security flaw has been discovered in jeecgboot The server processes these URLs up to 3.9.1. This affects the function FileDownloadUtils.download2DiskFromNet of the file /airag/app/debug of the component Cloud Instance Metadata Endpoint. The manipulation results in server-side request forgery. The attack may be performed from remote. The exploit has been released to the public and may be used for attacks. Upgrading to version 3.9.2 mitigates this issue. It is suggested to upgrade the affected component. |
| A flaw was found in Clair. The fetcher component makes outbound HTTP requests to attacker-supplied URIs from manifest layer descriptors without IP or scheme filtering. When PSK authentication is not configured (opt-in, not enforced by default), an unauthenticated attacker can submit a manifest with a URI pointing to internal services or cloud metadata endpoints. The SSRF is reflective for non-200 responses, leaking up to 256 bytes of error body content via CheckResponse error messages. Operator-managed Red Hat Quay deployments auto-configure PSK and are not exposed to the unauthenticated attack vector. |
| Jenkins Active Directory Plugin 2.41 and earlier follows LDAP referrals by default. |
| FlowIntel up to version 3.3.0 contains a server-side request forgery (SSRF) vulnerability in the external reference URL probe functionality in app/case/task.py. An attacker who can submit an external reference URL can cause the application server to issue an HTTP HEAD request to an attacker-specified destination. Due to insufficient validation of the URL scheme and resolved destination address, affected versions may allow requests to loopback, link-local, private, reserved, or other restricted network resources, potentially enabling interaction with internal services or cloud metadata endpoints from the server's network context. |
| typescript-utcp is a typescript implementation of UTCP. Prior to 1.1.2, the @utcp/http package is vulnerable to a blind Server-Side Request Forgery (SSRF) caused by a trust-boundary inconsistency between manual discovery and tool invocation. registerManual() validates the discovery URL against an HTTPS / loopback allowlist, but callTool() reuses the resolved toolCallTemplate.url directly without revalidating, and the OpenApiConverter blindly trusts whatever servers[0].url an attacker-hosted spec declares. An attacker who hosts a malicious OpenAPI spec on a legitimate HTTPS endpoint can declare e.g. servers: [{ url: "http://127.0.0.1:9090" }] or servers: [{ url: "http://169.254.169.254" }]; the converter then produces tools whose URL points at internal services on the agent host. This vulnerability is fixed in 1.1.2. |
| MoviePilot v2 contains a server-side request forgery vulnerability in the image proxy endpoint that allows authenticated attackers to request arbitrary URLs by supplying a resource_token cookie and a URL whose domain matches the assembled allowlist. Attackers can bypass internal network protections because the SecurityUtils.is_safe_url function performs only domain-membership checking without blocking private, loopback, or link-local addresses, enabling enumeration of internal services such as Jellyfin, Emby, or Plex and exfiltration of data from internal network resources. |
| Danelec MacGregor Voyage Data Recorder
passwords are stored with a hashing method which limits password length and is susceptible to brute force attacks. |
| GuardDog is a CLI tool to identify malicious PyPI packages. From 1.0.0 to 2.9.0, the programmatic remote project scanning path rewrites attacker-controlled repository URLs using a blind string replacement and then sends the caller's GitHub credentials with the resulting request. This allows an attacker who can influence the scanned repository URL to trigger SSRF and capture the GH_TOKEN used by GuardDog. This vulnerability is fixed in . |
| In the Linux kernel, the following vulnerability has been resolved:
gfs2: Fix slab-use-after-free in qd_put
Commit a475c5dd16e5 ("gfs2: Free quota data objects synchronously")
started freeing quota data objects during filesystem shutdown instead of
putting them back onto the LRU list, but it failed to remove these
objects from the LRU list, causing LRU list corruption. This caused
use-after-free when the shrinker (gfs2_qd_shrink_scan) tried to access
already-freed objects on the LRU list.
Fix this by removing qd objects from the LRU list before freeing them in
qd_put().
Initial fix from Deepanshu Kartikey <kartikey406@gmail.com>. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix fsck inconsistency caused by FGGC of node block
During FGGC node block migration, fsck may incorrectly treat the
migrated node block as fsync-written data.
The reproduction scenario:
root@vm:/mnt/f2fs# seq 1 2048 | xargs -n 1 ./test_sync // write inline inode and sync
root@vm:/mnt/f2fs# rm -f 1
root@vm:/mnt/f2fs# sync
root@vm:/mnt/f2fs# f2fs_io gc_range // move data block in sync mode and not write CP
SPO, "fsck --dry-run" find inode has already checkpointed but still
with DENT_BIT_SHIFT set
The root cause is that GC does not clear the dentry mark and fsync mark
during node block migration, leading fsck to misinterpret them as
user-issued fsync writes.
In BGGC mode, node block migration is handled by f2fs_sync_node_pages(),
which guarantees the dentry and fsync marks are cleared before writing.
This patch move the set/clear of the fsync|dentry marks into
__write_node_folio to make the logic clearer, and ensures the
fsync|dentry mark is cleared in FGGC. |
| In the Linux kernel, the following vulnerability has been resolved:
fs: afs: revert mmap_prepare() change
Partially reverts commit 9d5403b1036c ("fs: convert most other
generic_file_*mmap() users to .mmap_prepare()").
This is because the .mmap invocation establishes a refcount, but
.mmap_prepare is called at a point where a merge or an allocation failure
might happen after the call, which would leak the refcount increment.
Functionality is being added to permit the use of .mmap_prepare in this
case, but in the interim, we need to fix this. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix a potential use-after-free of BTF object
Refcounting in the check_pseudo_btf_id() function is incorrect:
the __check_pseudo_btf_id() function might get called with a zero
refcounted btf. Fix this, and patch related code accordingly.
v3: rephrase a comment (AI)
v2: fix a refcount leak introduced in v1 (AI) |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Preserve id of register in sync_linked_regs()
sync_linked_regs() copies the id of known_reg to reg when propagating
bounds of known_reg to reg using the off of known_reg, but when
known_reg was linked to reg like:
known_reg = reg ; both known_reg and reg get same id
known_reg += 4 ; known_reg gets off = 4, and its id gets BPF_ADD_CONST
now when a call to sync_linked_regs() happens, let's say with the following:
if known_reg >= 10 goto pc+2
known_reg's new bounds are propagated to reg but now reg gets
BPF_ADD_CONST from the copy.
This means if another link to reg is created like:
another_reg = reg ; another_reg should get the id of reg but
assign_scalar_id_before_mov() sees
BPF_ADD_CONST on reg and assigns a new id to it.
As reg has a new id now, known_reg's link to reg is broken. If we find
new bounds for known_reg, they will not be propagated to reg.
This can be seen in the selftest added in the next commit:
0: (85) call bpf_get_prandom_u32#7 ; R0=scalar()
1: (57) r0 &= 255 ; R0=scalar(smin=smin32=0,smax=umax=smax32=umax32=255,var_off=(0x0; 0xff))
2: (bf) r1 = r0 ; R0=scalar(id=1,smin=smin32=0,smax=umax=smax32=umax32=255,var_off=(0x0; 0xff)) R1=scalar(id=1,smin=smin32=0,smax=umax=smax32=umax32=255,var_off=(0x0; 0xff))
3: (07) r1 += 4 ; R1=scalar(id=1+4,smin=umin=smin32=umin32=4,smax=umax=smax32=umax32=259,var_off=(0x0; 0x1ff))
4: (a5) if r1 < 0xa goto pc+4 ; R1=scalar(id=1+4,smin=umin=smin32=umin32=10,smax=umax=smax32=umax32=259,var_off=(0x0; 0x1ff))
5: (bf) r2 = r0 ; R0=scalar(id=2,smin=umin=smin32=umin32=6,smax=umax=smax32=umax32=255) R2=scalar(id=2,smin=umin=smin32=umin32=6,smax=umax=smax32=umax32=255)
6: (a5) if r1 < 0xe goto pc+2 ; R1=scalar(id=1+4,smin=umin=smin32=umin32=14,smax=umax=smax32=umax32=259,var_off=(0x0; 0x1ff))
7: (35) if r0 >= 0xa goto pc+1 ; R0=scalar(id=2,smin=umin=smin32=umin32=6,smax=umax=smax32=umax32=9,var_off=(0x0; 0xf))
8: (37) r0 /= 0
div by zero
When 4 is verified, r1's bounds are propagated to r0 but r0 also gets
BPF_ADD_CONST (bug).
When 5 is verified, r0 gets a new id (2) and its link with r1 is broken.
After 6 we know r1 has bounds [14, 259] and therefore r0 should have
bounds [10, 255], therefore the branch at 7 is always taken. But because
r0's id was changed to 2, r1's new bounds are not propagated to r0.
The verifier still thinks r0 has bounds [6, 255] before 7 and execution
can reach div by zero.
Fix this by preserving id in sync_linked_regs() like off and subreg_def. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Fix race condition in QP timer handlers
I encontered the following warning:
WARNING: drivers/infiniband/sw/rxe/rxe_task.c:249 at rxe_sched_task+0x1c8/0x238 [rdma_rxe], CPU#0: swapper/0/0
...
libsha1 [last unloaded: ip6_udp_tunnel]
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Tainted: G C 6.19.0-rc5-64k-v8+ #37 PREEMPT
Tainted: [C]=CRAP
Hardware name: Raspberry Pi 4 Model B Rev 1.2
Call trace:
rxe_sched_task+0x1c8/0x238 [rdma_rxe] (P)
retransmit_timer+0x130/0x188 [rdma_rxe]
call_timer_fn+0x68/0x4d0
__run_timers+0x630/0x888
...
WARNING: drivers/infiniband/sw/rxe/rxe_task.c:38 at rxe_sched_task+0x1c0/0x238 [rdma_rxe], CPU#0: swapper/0/0
...
WARNING: drivers/infiniband/sw/rxe/rxe_task.c:111 at do_work+0x488/0x5c8 [rdma_rxe], CPU#3: kworker/u17:4/93400
...
refcount_t: underflow; use-after-free.
WARNING: lib/refcount.c:28 at refcount_warn_saturate+0x138/0x1a0, CPU#3: kworker/u17:4/93400
The issue is caused by a race condition between retransmit_timer() and
rxe_destroy_qp, leading to the Queue Pair's (QP) reference count dropping
to zero during timer handler execution.
It seems this warning is harmless because rxe_qp_do_cleanup() will flush
all pending timers and requests.
Example of flow causing the issue:
CPU0 CPU1
retransmit_timer() {
spin_lock_irqsave
rxe_destroy_qp()
__rxe_cleanup()
__rxe_put() // qp->ref_count decrease to 0
rxe_qp_do_cleanup() {
if (qp->valid) {
rxe_sched_task() {
WARN_ON(rxe_read(task->qp) <= 0);
}
}
spin_unlock_irqrestore
}
spin_lock_irqsave
qp->valid = 0
spin_unlock_irqrestore
}
Ensure the QP's reference count is maintained and its validity is checked
within the timer callbacks by adding calls to rxe_get(qp) and corresponding
rxe_put(qp) after use. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/ivpu: Disallow re-exporting imported GEM objects
Prevent re-exporting of imported GEM buffers by adding a custom
prime_handle_to_fd callback that checks if the object is imported
and returns -EOPNOTSUPP if so.
Re-exporting imported GEM buffers causes loss of buffer flags settings,
leading to incorrect device access and data corruption. |
| A flaw was found in the OpenShift Router. A user with EndpointSlice write access can exploit this vulnerability by creating a Service backed by an FQDN (Fully Qualified Domain Name) EndpointSlice that resolves to a cloud metadata endpoint. This allows the router to proxy requests to the cloud metadata endpoint, leading to the disclosure of instance credentials and other sensitive metadata. This bypasses previous security measures for validating IP addresses. |
| CodeWhale is a DeepSeek + MiMo coding agent in terminal. Prior to 0.8.22, the fetch_url tool validates the initial URL's resolved IP address against a restricted-IP blocklist (is_restricted_ip()) to prevent SSRF attacks against internal services (cloud metadata endpoints, localhost, private networks). However, the HTTP client (reqwest) is configured to automatically follow up to 5 redirects (reqwest::redirect::Policy::limited(5)) without re-validating the redirect target against the same SSRF protections. This vulnerability is fixed in 0.8.22. |
