| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Open Forms allows users create and publish smart forms. Prior to versions 3.2.7 and 3.3.3, forms where the prefill data fields are dynamically set to readonly/disabled can be modified by malicious users deliberately trying to modify data they're not supposed to. For regular users, the form fields are marked as readonly and cannot be modified through the user interface. This issue has been patched in versions 3.2.7 and 3.3.3. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/resctrl: Clear staged_config[] before and after it is used
As a temporary storage, staged_config[] in rdt_domain should be cleared
before and after it is used. The stale value in staged_config[] could
cause an MSR access error.
Here is a reproducer on a system with 16 usable CLOSIDs for a 15-way L3
Cache (MBA should be disabled if the number of CLOSIDs for MB is less than
16.) :
mount -t resctrl resctrl -o cdp /sys/fs/resctrl
mkdir /sys/fs/resctrl/p{1..7}
umount /sys/fs/resctrl/
mount -t resctrl resctrl /sys/fs/resctrl
mkdir /sys/fs/resctrl/p{1..8}
An error occurs when creating resource group named p8:
unchecked MSR access error: WRMSR to 0xca0 (tried to write 0x00000000000007ff) at rIP: 0xffffffff82249142 (cat_wrmsr+0x32/0x60)
Call Trace:
<IRQ>
__flush_smp_call_function_queue+0x11d/0x170
__sysvec_call_function+0x24/0xd0
sysvec_call_function+0x89/0xc0
</IRQ>
<TASK>
asm_sysvec_call_function+0x16/0x20
When creating a new resource control group, hardware will be configured
by the following process:
rdtgroup_mkdir()
rdtgroup_mkdir_ctrl_mon()
rdtgroup_init_alloc()
resctrl_arch_update_domains()
resctrl_arch_update_domains() iterates and updates all resctrl_conf_type
whose have_new_ctrl is true. Since staged_config[] holds the same values as
when CDP was enabled, it will continue to update the CDP_CODE and CDP_DATA
configurations. When group p8 is created, get_config_index() called in
resctrl_arch_update_domains() will return 16 and 17 as the CLOSIDs for
CDP_CODE and CDP_DATA, which will be translated to an invalid register -
0xca0 in this scenario.
Fix it by clearing staged_config[] before and after it is used.
[reinette: re-order commit tags] |
| NVIDIA DGX Spark GB10 contains a vulnerability in OSROOT firmware, where an attacker could cause an invalid memory read. A successful exploit of this vulnerability might lead to denial of service. |
| NVIDIA DGX Spark GB10 contains a vulnerability in SROOT firmware, where an attacker could cause improper validation of integrity. A successful exploit of this vulnerability might lead to information disclosure. |
| In nr modem, there is a possible system crash due to improper input validation. This could lead to remote denial of service with no additional execution privileges needed |
| In nr modem, there is a possible system crash due to improper input validation. This could lead to remote denial of service with no additional execution privileges needed |
| In nr modem, there is a possible system crash due to improper input validation. This could lead to remote denial of service with no additional execution privileges needed |
| In nr modem, there is a possible system crash due to improper input validation. This could lead to remote denial of service with no additional execution privileges needed |
| In modem, there is a possible system crash due to improper input validation. This could lead to remote denial of service with no additional execution privileges needed |
| In nr modem, there is a possible system crash due to improper input validation. This could lead to remote denial of service with no additional execution privileges needed |
| In nr modem, there is a possible system crash due to improper input validation. This could lead to remote denial of service with no additional execution privileges needed |
| In dpc modem, there is a possible system crash due to null pointer dereference. This could lead to remote denial of service with no additional execution privileges needed |
| In nr modem, there is a possible system crash due to improper input validation. This could lead to remote denial of service with no additional execution privileges needed |
| In nr modem, there is a possible system crash due to improper input validation. This could lead to remote denial of service with no additional execution privileges needed |
| In the Linux kernel, the following vulnerability has been resolved:
vfio/type1: prevent underflow of locked_vm via exec()
When a vfio container is preserved across exec, the task does not change,
but it gets a new mm with locked_vm=0, and loses the count from existing
dma mappings. If the user later unmaps a dma mapping, locked_vm underflows
to a large unsigned value, and a subsequent dma map request fails with
ENOMEM in __account_locked_vm.
To avoid underflow, grab and save the mm at the time a dma is mapped.
Use that mm when adjusting locked_vm, rather than re-acquiring the saved
task's mm, which may have changed. If the saved mm is dead, do nothing.
locked_vm is incremented for existing mappings in a subsequent patch. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: hv: Fix a crash in hv_pci_restore_msi_msg() during hibernation
When a Linux VM with an assigned PCI device runs on Hyper-V, if the PCI
device driver is not loaded yet (i.e. MSI-X/MSI is not enabled on the
device yet), doing a VM hibernation triggers a panic in
hv_pci_restore_msi_msg() -> msi_lock_descs(&pdev->dev), because
pdev->dev.msi.data is still NULL.
Avoid the panic by checking if MSI-X/MSI is enabled. |
| In the Linux kernel, the following vulnerability has been resolved:
dma-buf/dma-resv: Stop leaking on krealloc() failure
Currently dma_resv_get_fences() will leak the previously
allocated array if the fence iteration got restarted and
the krealloc_array() fails.
Free the old array by hand, and make sure we still clear
the returned *fences so the caller won't end up accessing
freed memory. Some (but not all) of the callers of
dma_resv_get_fences() seem to still trawl through the
array even when dma_resv_get_fences() failed. And let's
zero out *num_fences as well for good measure. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath9k: don't allow to overwrite ENDPOINT0 attributes
A bad USB device is able to construct a service connection response
message with target endpoint being ENDPOINT0 which is reserved for
HTC_CTRL_RSVD_SVC and should not be modified to be used for any other
services.
Reject such service connection responses.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: fix amdgpu_irq_put call trace in gmc_v10_0_hw_fini
The gmc.ecc_irq is enabled by firmware per IFWI setting,
and the host driver is not privileged to enable/disable
the interrupt. So, it is meaningless to use the amdgpu_irq_put
function in gmc_v10_0_hw_fini, which also leads to the call
trace.
[ 82.340264] Call Trace:
[ 82.340265] <TASK>
[ 82.340269] gmc_v10_0_hw_fini+0x83/0xa0 [amdgpu]
[ 82.340447] gmc_v10_0_suspend+0xe/0x20 [amdgpu]
[ 82.340623] amdgpu_device_ip_suspend_phase2+0x127/0x1c0 [amdgpu]
[ 82.340789] amdgpu_device_ip_suspend+0x3d/0x80 [amdgpu]
[ 82.340955] amdgpu_device_pre_asic_reset+0xdd/0x2b0 [amdgpu]
[ 82.341122] amdgpu_device_gpu_recover.cold+0x4dd/0xbb2 [amdgpu]
[ 82.341359] amdgpu_debugfs_reset_work+0x4c/0x70 [amdgpu]
[ 82.341529] process_one_work+0x21d/0x3f0
[ 82.341535] worker_thread+0x1fa/0x3c0
[ 82.341538] ? process_one_work+0x3f0/0x3f0
[ 82.341540] kthread+0xff/0x130
[ 82.341544] ? kthread_complete_and_exit+0x20/0x20
[ 82.341547] ret_from_fork+0x22/0x30 |
| Permission control vulnerability in the file management module.
Impact: Successful exploitation of this vulnerability may affect service confidentiality. |
