| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
memfd: deny writeable mappings when implying SEAL_WRITE
When SEAL_EXEC is added, SEAL_WRITE is implied to make W^X. But the
implied seal is set after the check that makes sure the memfd can not have
any writable mappings. This means one can use SEAL_EXEC to apply
SEAL_WRITE while having writeable mappings.
This breaks the contract that SEAL_WRITE provides and can be used by an
attacker to pass a memfd that appears to be write sealed but can still be
modified arbitrarily.
Fix this by adding the implied seals before the call for
mapping_deny_writable() is done. |
| In the Linux kernel, the following vulnerability has been resolved:
hpfs: fix a crash if hpfs_map_dnode_bitmap fails
If hpfs_map_dnode_bitmap fails, the code would call hpfs_brelse4 on
uninitialized quad buffer head, causing a crash. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: tcpm/tcpci_maxim: validate header NDO against RX_BYTE_CNT
A broken/malicious port can transmit a CRC-valid frame whose header
advertises up to seven data objects but whose body carries fewer than
that. Check for this, and rightfully reject the message, instead of
reading from uninitialized stack memory. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: wcove: don't write past struct pd_message in wcove_read_rx_buffer()
wcove_read_rx_buffer() copies the PD RX FIFO into the caller's
struct pd_message with
for (i = 0; i < USBC_RXINFO_RXBYTES(info); i++)
regmap_read(wcove->regmap, USBC_RX_DATA + i, msg + i);
which has two problems:
USBC_RXINFO_RXBYTES() is a 5-bit field (max 31) while struct pd_message
is 30 bytes (__le16 header + __le32 payload[PD_MAX_PAYLOAD], packed).
The byte count latched in RXINFO is the number of bytes the port partner
put on the wire, so a malicious partner that transmits a 31-byte frame
can drive the loop one byte past the destination if the WCOVE BMC
receiver does not enforce the PD object-count limit in hardware. The
existing FIXME flagged this as unverified.
Independently, regmap_read() takes an unsigned int * and stores a full
unsigned int at the destination. Passing the byte pointer msg + i means
each iteration writes four bytes; the high three are zero (val_bits is
8) and are normally overwritten by the next iteration, but the final
iteration's high bytes are not. With RXBYTES == 30 the i == 29 iteration
already writes three zero bytes past msg, which sits on the IRQ thread's
stack in wcove_typec_irq().
Clamp the loop to sizeof(struct pd_message) and read each register into
a local before storing only its low byte, so the copy can never exceed
the destination regardless of what RXINFO reports. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: altmodes/displayport: validate count before reading Status Update VDO
A broken/malicious device can send the incorrect count for a status
update VDO, which will cause the kernel to read uninitialized stack data
and send it off elsewhere.
Fix this up by correctly verifying the count for the update object. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: tcpm: bound altmode_desc[] per iteration in svdm_consume_modes()
svdm_consume_modes() checks pmdata->altmodes against the array size once
before the loop over the count, but forgot to check the bound at every
point in the loop.
In the well-behaved SVDM discovery flow this is harmless because each of
at most SVID_DISCOVERY_MAX SVIDs contributes at most MODE_DISCOVERY_MAX
modes, exactly filling altmode_desc[ALTMODE_DISCOVERY_MAX]. But the
CMDT_RSP_ACK handler in tcpm_pd_svdm() does not correlate an incoming
ACK with any request the port actually sent. Once port->partner is set,
an unsolicited Discover Modes ACK is consumed unconditionally. A broken
or malicious port partner can therefore drive altmodes to
ALTMODE_DISCOVERY_MAX - 1 via the normal flow, and then send one extra
Discover Modes ACK with seven VDOs. Because the pre-loop check passes,
the loop could then writes up to five entries past altmode_desc[]. For
mode_data_prime the next field in struct tcpm_port is the
partner_altmode[] pointer array, which then receives partner-chosen
SVID/VDO bytes.
Move the bound check inside the loop so the array can never be indexed
past ALTMODE_DISCOVERY_MAX regardless of how many VDOs the partner
supplies or how the function was reached. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: ucsi: ccg: reject firmware images without a ':' record header
do_flash() locates the first .cyacd record with
p = strnchr(fw->data, fw->size, ':');
while (p < eof) {
s = strnchr(p + 1, eof - p - 1, ':');
...
}
If the firmware image contains no ':' byte, strnchr() returns NULL.
NULL compares less than the valid kernel pointer eof, so the loop body
runs and strnchr() is called with p + 1 == (void *)1 and a length of
roughly (unsigned long)eof, causing a wonderful crash.
The not_signed_fw fallthrough earlier in do_flash() and the chip-state
branches in ccg_fw_update_needed() allow an unsigned blob to reach this
loop, so a root user who can place a crafted file under /lib/firmware
and write the do_flash sysfs attribute can trigger the oops.
Bail out with -EINVAL when the initial strnchr() returns NULL. |
| The Tenda TX9 V22.03.02.05 firmware has a stack overflow vulnerability in the sub_4418CC function of the file /goform/SetNetControlList. |
| SolarWinds Serv-U is affected by a privilege escalation vulnerability that allows a domain administrator to escalate their user type to that of a system administrator. The impact is lower in Windows deployments. |
| SolarWinds Serv-U is affected by a privilege escalation vulnerability. This would elevate a group’s access to system administrator and allow code execution as root. The impact is lower in Windows deployments. |
| SolarWinds Serv-U is affected by an insecure direct object reference (IDOR) vulnerability that can lead to SMTP hijacking leading to arbitrary account takeover. The impact is lower in Windows deployments. |
| SolarWinds Serv-U is affected by an insecure direct object reference vulnerability that leads to an account takeover. User authentication is required. The impact is lower in Windows deployments. |
| SolarWinds Serv-U is affected by an insecure direct object reference (IDOR) vulnerability that can lead to privilege escalation. This issue requires domain administrator access. The impact is lower in Windows deployments. |
| PraisonAI is a multi-agent teams system. Prior to version 4.6.40, hidden metadata in a webpage causes PraisonAI agents to write attacker-controlled content to arbitrary paths. `write_file` skips path validation when `workspace=None` (always `None` in production). Version 4.6.40 fixes the issue. |
| A crafted message in the BuildKit low-level build API can be used to remove the contents of the /tmp directory. The action that can normally be used to delete files inside the build container rootfs can escape into the real host temp directory. |
| A malicious BuildKit client or frontend could craft a request that could lead to BuildKit daemon crashing with a panic. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: pressure: bmp280: fix stack leak in bmp580 trigger handler
bmp580_trigger_handler() declares its scan buffer on the stack without
an initializer and then memcpy()s 3 bytes of 24-bit sensor data into
each 4-byte __le32 field. The high byte of comp_temp and comp_press is
left uninitialized, and the channel storagebits is 32, so two bytes of
stack are pushed to userspace per scan.
This is a regression from when the buffer lived in the private data, the
move to a stack-local struct dropped the implicit zeroing.
bme280_trigger_handler() was fixed up to handle this bug, but this
driver was not fixed because there was no padding hole, but rather a
short-fill issue.
Fix this all by just zero-initializing the structure on the stack. |
| In the Linux kernel, the following vulnerability has been resolved:
vsock/virtio: bind uarg before filling zerocopy skb
virtio_transport_send_pkt_info() allocates or reuses the zerocopy uarg
before entering the send loop, but virtio_transport_alloc_skb() still
fills the skb before it inherits that uarg. When fixed-buffer vectored
zerocopy hits MAX_SKB_FRAGS, io_sg_from_iter() may partially attach
managed frags and return -EMSGSIZE. The rollback path call kfree_skb()
to free an skb that carries SKBFL_MANAGED_FRAG_REFS but no uarg, so
skb_release_data() falls through to ordinary frag unref.
Pass the uarg into virtio_transport_alloc_skb() and bind it immediately
before virtio_transport_fill_skb(). This keeps control or no-payload skbs
untouched while ensuring success and rollback share one lifetime rule. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: fix race between sctp_wait_for_connect and peeloff
sctp_wait_for_connect() drops and re-acquires the socket lock while
waiting for the association to reach ESTABLISHED state. During this
window, another thread can peeloff the association to a new socket via
getsockopt(SCTP_SOCKOPT_PEELOFF), changing asoc->base.sk. After
re-acquiring the old socket lock, sctp_wait_for_connect() returns
success without noticing the migration — the caller then accesses
the association under the wrong lock in sctp_datamsg_from_user().
Add the same sk != asoc->base.sk check that sctp_wait_for_sndbuf()
already has, returning an error if the association was migrated while
we slept. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mana: Add NULL guards in teardown path to prevent panic on attach failure
When queue allocation fails partway through, the error cleanup frees
and NULLs apc->tx_qp and apc->rxqs. Multiple teardown paths such as
mana_remove(), mana_change_mtu() recovery, and internal error handling
in mana_alloc_queues() can subsequently call into functions that
dereference these pointers without NULL checks:
- mana_chn_setxdp() dereferences apc->rxqs[0], causing a NULL pointer
dereference panic (CR2: 0000000000000000 at mana_chn_setxdp+0x26).
- mana_destroy_vport() iterates apc->rxqs without a NULL check.
- mana_fence_rqs() iterates apc->rxqs without a NULL check.
- mana_dealloc_queues() iterates apc->tx_qp without a NULL check.
Add NULL guards for apc->rxqs in mana_fence_rqs(),
mana_destroy_vport(), and before the mana_chn_setxdp() call. Add a
NULL guard for apc->tx_qp in mana_dealloc_queues() to skip TX queue
draining when TX queues were never allocated or already freed. |
