| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In F5 BIG-IP LTM, AAM, AFM, APM, ASM, Link Controller, PEM, PSM software version 12.0.0 to 12.1.2, 11.6.0 to 11.6.1, 11.4.0 to 11.5.4, when a virtual server uses the standard configuration of HTTP/2 or SPDY profile with Client SSL profile, and the client initiates a number of concurrent streams beyond the advertised limit can cause a disruption of service. Remote client initiating stream beyond the advertised limit can cause a disruption of service. The Traffic Management Microkernel (TMM) data plane is exposed to this issue; the control plane is not exposed. |
| MTK platform in Huawei smart phones with software of earlier than Nice-AL00C00B160 versions, earlier than Nice-AL10C00B140 versions has a any memory access vulnerability. An attacker tricks a user into installing a malicious application on the smart phone, and send given parameter to cause to any memory access vulnerabilities, leading to sensitive information leakage. |
| An issue was discovered in Fatek Automation PLC Ethernet Module. The affected Ether_cfg software configuration tool runs on the following Fatek PLCs: CBEH versions prior to V3.6 Build 170215, CBE versions prior to V3.6 Build 170215, CM55E versions prior to V3.6 Build 170215, and CM25E versions prior to V3.6 Build 170215. A stack-based buffer overflow vulnerability has been identified, which may allow remote code execution or crash the affected device. |
| An issue was discovered in icoutils 0.31.1. A buffer overflow was observed in the "decode_ne_resource_id" function in the "restable.c" source file. This is happening because the "len" parameter for memcpy is not checked for size and thus becomes a negative integer in the process, resulting in a failed memcpy. This affects wrestool. |
| All versions of Quagga, 0.93 through 1.1.0, are vulnerable to an unbounded memory allocation in the telnet 'vty' CLI, leading to a Denial-of-Service of Quagga daemons, or even the entire host. When Quagga daemons are configured with their telnet CLI enabled, anyone who can connect to the TCP ports can trigger this vulnerability, prior to authentication. Most distributions restrict the Quagga telnet interface to local access only by default. The Quagga telnet interface 'vty' input buffer grows automatically, without bound, so long as a newline is not entered. This allows an attacker to cause the Quagga daemon to allocate unbounded memory by sending very long strings without a newline. Eventually the daemon is terminated by the system, or the system itself runs out of memory. This is fixed in Quagga 1.1.1 and Free Range Routing (FRR) Protocol Suite 2017-01-10. |
| Installing a zero-permission Android application on certain Samsung Android devices with KK(4.4), L(5.0/5.1), and M(6.0) software can continually crash the system_server process in the Android OS. The zero-permission app will create an active install session for a separate app that it has embedded within it. The active install session of the embedded app is performed using the android.content.pm.PackageInstaller class and its nested classes in the Android API. The active install session will write the embedded APK file to the /data/app directory, but the app will not be installed since third-party applications cannot programmatically install apps. Samsung has modified AOSP in order to accelerate the parsing of APKs by introducing the com.android.server.pm.PackagePrefetcher class and its nested classes. These classes will parse the APKs present in the /data/app directory and other directories, even if the app is not actually installed. The embedded APK that was written to the /data/app directory via the active install session has a very large but valid AndroidManifest.xml file. Specifically, the AndroidManifest.xml file contains a very large string value for the name of a permission-tree that it declares. When system_server tries to parse the APK file of the embedded app from the active install session, it will crash due to an uncaught error (i.e., java.lang.OutOfMemoryError) or an uncaught exception (i.e., std::bad_alloc) because of memory constraints. The Samsung Android device will encounter a soft reboot due to a system_server crash, and this action will keep repeating since parsing the APKs in the /data/app directory as performed by the system_server process is part of the normal boot process. The Samsung ID is SVE-2016-6917. |
| A vulnerability in the Universal Plug-and-Play (UPnP) implementation in the Cisco CVR100W Wireless-N VPN Router could allow an unauthenticated, Layer 2-adjacent attacker to execute arbitrary code or cause a denial of service (DoS) condition. The remote code execution could occur with root privileges. The vulnerability is due to incomplete range checks of the UPnP input data, which could result in a buffer overflow. An attacker could exploit this vulnerability by sending a malicious request to the UPnP listening port of the targeted device. An exploit could allow the attacker to cause the device to reload or potentially execute arbitrary code with root privileges. This vulnerability affects all firmware releases of the Cisco CVR100W Wireless-N VPN Router prior to Firmware Release 1.0.1.22. Cisco Bug IDs: CSCuz72642. |
| A vulnerability in the received packet parser of Cisco Expressway Series and Cisco TelePresence Video Communication Server (VCS) software could allow an unauthenticated, remote attacker to cause a reload of the affected system, resulting in a denial of service (DoS) condition. The vulnerability is due to insufficient size validation of user-supplied data. An attacker could exploit this vulnerability by sending crafted H.224 data in Real-Time Transport Protocol (RTP) packets in an H.323 call. An exploit could allow the attacker to overflow a buffer in a cache that belongs to the received packet parser, which will result in a crash of the application, resulting in a DoS condition. All versions of Cisco Expressway Series Software and Cisco TelePresence VCS Software prior to version X8.8.2 are vulnerable. Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. Cisco Bug IDs: CSCus99263. |
| STDU Viewer 1.6.375 allows attackers to execute arbitrary code or cause a denial of service via a crafted .xps file, related to an "Illegal Instruction Violation starting at Unknown Symbol @ 0x00000000049c024c called from STDUXPSFile!DllUnregisterServer+0x0000000000025706." |
| IrfanView 4.50 - 64bit with CADImage plugin version 12.0.0.5 allows attackers to cause a denial of service or possibly have unspecified other impact via a crafted .dwg file, related to a "Read Access Violation starting at CADIMAGE+0x00000000003d246f." |
| IrfanView 4.50 - 64bit with CADImage plugin version 12.0.0.5 allows attackers to cause a denial of service or possibly have unspecified other impact via a crafted .dwg file, related to a "Read Access Violation starting at CADIMAGE+0x00000000003d22d8." |
| IrfanView 4.50 - 64bit with CADImage plugin version 12.0.0.5 allows attackers to execute arbitrary code or cause a denial of service via a crafted .dwg file, related to a "Read Access Violation on Control Flow starting at CADIMAGE+0x00000000003d35a7." |
| IrfanView 4.50 - 64bit with CADImage plugin version 12.0.0.5 allows attackers to cause a denial of service or possibly have unspecified other impact via a crafted .dwg file, related to "Data from Faulting Address controls Branch Selection starting at CADIMAGE+0x000000000002ca2e." |
| IrfanView 4.50 - 64bit with CADImage plugin version 12.0.0.5 allows attackers to cause a denial of service or possibly have unspecified other impact via a crafted .dwg file, related to "Data from Faulting Address controls Branch Selection starting at CADIMAGE+0x00000000003d21b3." |
| Multiple buffer overflows in the ctl_put* functions in NTP before 4.2.8p10 and 4.3.x before 4.3.94 allow remote authenticated users to have unspecified impact via a long variable. |
| Buffer overflow in Active Management Technology (AMT) in Intel Manageability Engine Firmware 8.x/9.x/10.x/11.0/11.5/11.6/11.7/11.10/11.20 allows attacker with remote Admin access to the system to execute arbitrary code with AMT execution privilege. |
| IrfanView 4.50 - 64bit with BabaCAD4Image plugin version 1.3 allows attackers to execute arbitrary code or cause a denial of service via a crafted .dwg file, related to "Data from Faulting Address controls subsequent Write Address starting at BabaCAD4Image!ShowPlugInOptions+0x000000000001eca0." |
| IrfanView 4.50 - 64bit with CADImage plugin version 12.0.0.5 allows attackers to cause a denial of service or possibly have unspecified other impact via a crafted .dwg file, related to "Data from Faulting Address is used as one or more arguments in a subsequent Function Call starting at CADIMAGE+0x00000000003e9462." |
| drivers/media/video/videobuf-vmalloc.c in the Linux kernel before 2.6.24 does not initialize videobuf_mapping data structures, which allows local users to trigger an incorrect count value and videobuf leak via unspecified vectors, a different vulnerability than CVE-2010-5321. |
| Multiple buffer overflows in kernel in Intel Manageability Engine Firmware 11.0/11.5/11.6/11.7/11.10/11.20 allow attacker with local access to the system to execute arbitrary code. |
