| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix out-of-bounds access in 'dcn21_link_encoder_create'
An issue was identified in the dcn21_link_encoder_create function where
an out-of-bounds access could occur when the hpd_source index was used
to reference the link_enc_hpd_regs array. This array has a fixed size
and the index was not being checked against the array's bounds before
accessing it.
This fix adds a conditional check to ensure that the hpd_source index is
within the valid range of the link_enc_hpd_regs array. If the index is
out of bounds, the function now returns NULL to prevent undefined
behavior.
References:
[ 65.920507] ------------[ cut here ]------------
[ 65.920510] UBSAN: array-index-out-of-bounds in drivers/gpu/drm/amd/amdgpu/../display/dc/resource/dcn21/dcn21_resource.c:1312:29
[ 65.920519] index 7 is out of range for type 'dcn10_link_enc_hpd_registers [5]'
[ 65.920523] CPU: 3 PID: 1178 Comm: modprobe Tainted: G OE 6.8.0-cleanershaderfeatureresetasdntipmi200nv2132 #13
[ 65.920525] Hardware name: AMD Majolica-RN/Majolica-RN, BIOS WMJ0429N_Weekly_20_04_2 04/29/2020
[ 65.920527] Call Trace:
[ 65.920529] <TASK>
[ 65.920532] dump_stack_lvl+0x48/0x70
[ 65.920541] dump_stack+0x10/0x20
[ 65.920543] __ubsan_handle_out_of_bounds+0xa2/0xe0
[ 65.920549] dcn21_link_encoder_create+0xd9/0x140 [amdgpu]
[ 65.921009] link_create+0x6d3/0xed0 [amdgpu]
[ 65.921355] create_links+0x18a/0x4e0 [amdgpu]
[ 65.921679] dc_create+0x360/0x720 [amdgpu]
[ 65.921999] ? dmi_matches+0xa0/0x220
[ 65.922004] amdgpu_dm_init+0x2b6/0x2c90 [amdgpu]
[ 65.922342] ? console_unlock+0x77/0x120
[ 65.922348] ? dev_printk_emit+0x86/0xb0
[ 65.922354] dm_hw_init+0x15/0x40 [amdgpu]
[ 65.922686] amdgpu_device_init+0x26a8/0x33a0 [amdgpu]
[ 65.922921] amdgpu_driver_load_kms+0x1b/0xa0 [amdgpu]
[ 65.923087] amdgpu_pci_probe+0x1b7/0x630 [amdgpu]
[ 65.923087] local_pci_probe+0x4b/0xb0
[ 65.923087] pci_device_probe+0xc8/0x280
[ 65.923087] really_probe+0x187/0x300
[ 65.923087] __driver_probe_device+0x85/0x130
[ 65.923087] driver_probe_device+0x24/0x110
[ 65.923087] __driver_attach+0xac/0x1d0
[ 65.923087] ? __pfx___driver_attach+0x10/0x10
[ 65.923087] bus_for_each_dev+0x7d/0xd0
[ 65.923087] driver_attach+0x1e/0x30
[ 65.923087] bus_add_driver+0xf2/0x200
[ 65.923087] driver_register+0x64/0x130
[ 65.923087] ? __pfx_amdgpu_init+0x10/0x10 [amdgpu]
[ 65.923087] __pci_register_driver+0x61/0x70
[ 65.923087] amdgpu_init+0x7d/0xff0 [amdgpu]
[ 65.923087] do_one_initcall+0x49/0x310
[ 65.923087] ? kmalloc_trace+0x136/0x360
[ 65.923087] do_init_module+0x6a/0x270
[ 65.923087] load_module+0x1fce/0x23a0
[ 65.923087] init_module_from_file+0x9c/0xe0
[ 65.923087] ? init_module_from_file+0x9c/0xe0
[ 65.923087] idempotent_init_module+0x179/0x230
[ 65.923087] __x64_sys_finit_module+0x5d/0xa0
[ 65.923087] do_syscall_64+0x76/0x120
[ 65.923087] entry_SYSCALL_64_after_hwframe+0x6e/0x76
[ 65.923087] RIP: 0033:0x7f2d80f1e88d
[ 65.923087] Code: 5b 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 73 b5 0f 00 f7 d8 64 89 01 48
[ 65.923087] RSP: 002b:00007ffc7bc1aa78 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
[ 65.923087] RAX: ffffffffffffffda RBX: 0000564c9c1db130 RCX: 00007f2d80f1e88d
[ 65.923087] RDX: 0000000000000000 RSI: 0000564c9c1e5480 RDI: 000000000000000f
[ 65.923087] RBP: 0000000000040000 R08: 0000000000000000 R09: 0000000000000002
[ 65.923087] R10: 000000000000000f R11: 0000000000000246 R12: 0000564c9c1e5480
[ 65.923087] R13: 0000564c9c1db260 R14: 0000000000000000 R15: 0000564c9c1e54b0
[ 65.923087] </TASK>
[ 65.923927] ---[ end trace ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
vfio/pci: Properly hide first-in-list PCIe extended capability
There are cases where a PCIe extended capability should be hidden from
the user. For example, an unknown capability (i.e., capability with ID
greater than PCI_EXT_CAP_ID_MAX) or a capability that is intentionally
chosen to be hidden from the user.
Hiding a capability is done by virtualizing and modifying the 'Next
Capability Offset' field of the previous capability so it points to the
capability after the one that should be hidden.
The special case where the first capability in the list should be hidden
is handled differently because there is no previous capability that can
be modified. In this case, the capability ID and version are zeroed
while leaving the next pointer intact. This hides the capability and
leaves an anchor for the rest of the capability list.
However, today, hiding the first capability in the list is not done
properly if the capability is unknown, as struct
vfio_pci_core_device->pci_config_map is set to the capability ID during
initialization but the capability ID is not properly checked later when
used in vfio_config_do_rw(). This leads to the following warning [1] and
to an out-of-bounds access to ecap_perms array.
Fix it by checking cap_id in vfio_config_do_rw(), and if it is greater
than PCI_EXT_CAP_ID_MAX, use an alternative struct perm_bits for direct
read only access instead of the ecap_perms array.
Note that this is safe since the above is the only case where cap_id can
exceed PCI_EXT_CAP_ID_MAX (except for the special capabilities, which
are already checked before).
[1]
WARNING: CPU: 118 PID: 5329 at drivers/vfio/pci/vfio_pci_config.c:1900 vfio_pci_config_rw+0x395/0x430 [vfio_pci_core]
CPU: 118 UID: 0 PID: 5329 Comm: simx-qemu-syste Not tainted 6.12.0+ #1
(snip)
Call Trace:
<TASK>
? show_regs+0x69/0x80
? __warn+0x8d/0x140
? vfio_pci_config_rw+0x395/0x430 [vfio_pci_core]
? report_bug+0x18f/0x1a0
? handle_bug+0x63/0xa0
? exc_invalid_op+0x19/0x70
? asm_exc_invalid_op+0x1b/0x20
? vfio_pci_config_rw+0x395/0x430 [vfio_pci_core]
? vfio_pci_config_rw+0x244/0x430 [vfio_pci_core]
vfio_pci_rw+0x101/0x1b0 [vfio_pci_core]
vfio_pci_core_read+0x1d/0x30 [vfio_pci_core]
vfio_device_fops_read+0x27/0x40 [vfio]
vfs_read+0xbd/0x340
? vfio_device_fops_unl_ioctl+0xbb/0x740 [vfio]
? __rseq_handle_notify_resume+0xa4/0x4b0
__x64_sys_pread64+0x96/0xc0
x64_sys_call+0x1c3d/0x20d0
do_syscall_64+0x4d/0x120
entry_SYSCALL_64_after_hwframe+0x76/0x7e |
| In the Linux kernel, the following vulnerability has been resolved:
soc: qcom: geni-se: fix array underflow in geni_se_clk_tbl_get()
This loop is supposed to break if the frequency returned from
clk_round_rate() is the same as on the previous iteration. However,
that check doesn't make sense on the first iteration through the loop.
It leads to reading before the start of these->clk_perf_tbl[] array. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath9k: add range check for conn_rsp_epid in htc_connect_service()
I found the following bug in my fuzzer:
UBSAN: array-index-out-of-bounds in drivers/net/wireless/ath/ath9k/htc_hst.c:26:51
index 255 is out of range for type 'htc_endpoint [22]'
CPU: 0 UID: 0 PID: 8 Comm: kworker/0:0 Not tainted 6.11.0-rc6-dirty #14
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Workqueue: events request_firmware_work_func
Call Trace:
<TASK>
dump_stack_lvl+0x180/0x1b0
__ubsan_handle_out_of_bounds+0xd4/0x130
htc_issue_send.constprop.0+0x20c/0x230
? _raw_spin_unlock_irqrestore+0x3c/0x70
ath9k_wmi_cmd+0x41d/0x610
? mark_held_locks+0x9f/0xe0
...
Since this bug has been confirmed to be caused by insufficient verification
of conn_rsp_epid, I think it would be appropriate to add a range check for
conn_rsp_epid to htc_connect_service() to prevent the bug from occurring. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Check validity of link->type in bpf_link_show_fdinfo()
If a newly-added link type doesn't invoke BPF_LINK_TYPE(), accessing
bpf_link_type_strs[link->type] may result in an out-of-bounds access.
To spot such missed invocations early in the future, checking the
validity of link->type in bpf_link_show_fdinfo() and emitting a warning
when such invocations are missed. |
| In the Linux kernel, the following vulnerability has been resolved:
igb: Fix potential invalid memory access in igb_init_module()
The pci_register_driver() can fail and when this happened, the dca_notifier
needs to be unregistered, otherwise the dca_notifier can be called when
igb fails to install, resulting to invalid memory access. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs3: Add bounds checking to mi_enum_attr()
Added bounds checking to make sure that every attr don't stray beyond
valid memory region. |
| execute_filter_delta in archive_read_support_format_rar.c in libarchive before 3.7.5 allows out-of-bounds access via a crafted archive file because src can move beyond dst. |
| An issue was discovered in Fort before 1.6.3. A malicious RPKI repository that descends from a (trusted) Trust Anchor can serve (via rsync or RRDP) a resource certificate containing a Key Usage extension composed of more than two bytes of data. Fort writes this string into a 2-byte buffer without properly sanitizing its length, leading to a buffer overflow. |
| libmodbus v3.1.6 was discovered to contain a heap overflow via the modbus_mapping_free() function. |
| FFmpeg n6.1.1 has an Out-of-bounds Read via libavcodec/ppc/vp8dsp_altivec.c, static const vec_s8 h_subpel_filters_outer |
| FreeRDP is a free implementation of the Remote Desktop Protocol. FreeRDP based clients prior to version 3.5.1 are vulnerable to out-of-bounds read if `((nWidth == 0) and (nHeight == 0))`. Version 3.5.1 contains a patch for the issue. No known workarounds are available. |
| FreeRDP is a free implementation of the Remote Desktop Protocol. FreeRDP based clients prior to version 3.5.1 are vulnerable to out-of-bounds read. Version 3.5.1 contains a patch for the issue. No known workarounds are available. |
| FreeRDP is a free implementation of the Remote Desktop Protocol. FreeRDP based based clients using `/bpp:32` legacy `GDI` drawing path with a version of FreeRDP prior to 3.5.0 or 2.11.6 are vulnerable to out-of-bounds read. Versions 3.5.0 and 2.11.6 patch the issue. As a workaround, use modern drawing paths (e.g. `/rfx` or `/gfx` options). The workaround requires server side support. |
| FreeRDP is a free implementation of the Remote Desktop Protocol. FreeRDP based clients and servers that use a version of FreeRDP prior to 3.5.0 or 2.11.6 are vulnerable to out-of-bounds read. Versions 3.5.0 and 2.11.6 patch the issue. No known workarounds are available. |
| FreeRDP is a free implementation of the Remote Desktop Protocol. FreeRDP based clients that use a version of FreeRDP prior to 3.5.0 or 2.11.6 are vulnerable to out-of-bounds read. Versions 3.5.0 and 2.11.6 patch the issue. As a workaround, use `/gfx` or `/rfx` modes (on by default, require server side support). |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: Fixed overflow check in mi_enum_attr() |
| In the Linux kernel, the following vulnerability has been resolved:
inet: inet_defrag: prevent sk release while still in use
ip_local_out() and other functions can pass skb->sk as function argument.
If the skb is a fragment and reassembly happens before such function call
returns, the sk must not be released.
This affects skb fragments reassembled via netfilter or similar
modules, e.g. openvswitch or ct_act.c, when run as part of tx pipeline.
Eric Dumazet made an initial analysis of this bug. Quoting Eric:
Calling ip_defrag() in output path is also implying skb_orphan(),
which is buggy because output path relies on sk not disappearing.
A relevant old patch about the issue was :
8282f27449bf ("inet: frag: Always orphan skbs inside ip_defrag()")
[..]
net/ipv4/ip_output.c depends on skb->sk being set, and probably to an
inet socket, not an arbitrary one.
If we orphan the packet in ipvlan, then downstream things like FQ
packet scheduler will not work properly.
We need to change ip_defrag() to only use skb_orphan() when really
needed, ie whenever frag_list is going to be used.
Eric suggested to stash sk in fragment queue and made an initial patch.
However there is a problem with this:
If skb is refragmented again right after, ip_do_fragment() will copy
head->sk to the new fragments, and sets up destructor to sock_wfree.
IOW, we have no choice but to fix up sk_wmem accouting to reflect the
fully reassembled skb, else wmem will underflow.
This change moves the orphan down into the core, to last possible moment.
As ip_defrag_offset is aliased with sk_buff->sk member, we must move the
offset into the FRAG_CB, else skb->sk gets clobbered.
This allows to delay the orphaning long enough to learn if the skb has
to be queued or if the skb is completing the reasm queue.
In the former case, things work as before, skb is orphaned. This is
safe because skb gets queued/stolen and won't continue past reasm engine.
In the latter case, we will steal the skb->sk reference, reattach it to
the head skb, and fix up wmem accouting when inet_frag inflates truesize. |
| FreeRDP is a set of free and open source remote desktop protocol library and clients. In affected versions an integer overflow in `freerdp_bitmap_planar_context_reset` leads to heap-buffer overflow. This affects FreeRDP based clients. FreeRDP based server implementations and proxy are not affected. A malicious server could prepare a `RDPGFX_RESET_GRAPHICS_PDU` to allocate too small buffers, possibly triggering later out of bound read/write. Data extraction over network is not possible, the buffers are used to display an image. This issue has been addressed in version 2.11.5 and 3.2.0. Users are advised to upgrade. there are no know workarounds for this vulnerability. |
| Stack-based Buffer Overflow vulnerability in libmodbus v3.1.10 allows to overflow the buffer allocated for the Modbus response if the function tries to reply to a Modbus request with an
unexpected length. |
