| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/amd: serialize sequence allocation under concurrent TLB invalidations
With concurrent TLB invalidations, completion wait randomly gets timed out
because cmd_sem_val was incremented outside the IOMMU spinlock, allowing
CMD_COMPL_WAIT commands to be queued out of sequence and breaking the
ordering assumption in wait_on_sem().
Move the cmd_sem_val increment under iommu->lock so completion sequence
allocation is serialized with command queuing.
And remove the unnecessary return. |
| In the Linux kernel, the following vulnerability has been resolved:
x86: shadow stacks: proper error handling for mmap lock
김영민 reports that shstk_pop_sigframe() doesn't check for errors from
mmap_read_lock_killable(), which is a silly oversight, and also shows
that we haven't marked those functions with "__must_check", which would
have immediately caught it.
So let's fix both issues. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix use-after-free in __ksmbd_close_fd() via durable scavenger
When a durable file handle survives session disconnect (TCP close without
SMB2_LOGOFF), session_fd_check() sets fp->conn = NULL to preserve the
handle for later reconnection. However, it did not clean up the byte-range
locks on fp->lock_list.
Later, when the durable scavenger thread times out and calls
__ksmbd_close_fd(NULL, fp), the lock cleanup loop did:
spin_lock(&fp->conn->llist_lock);
This caused a slab use-after-free because fp->conn was NULL and the
original connection object had already been freed by
ksmbd_tcp_disconnect().
The root cause is asymmetric cleanup: lock entries (smb_lock->clist) were
left dangling on the freed conn->lock_list while fp->conn was nulled out.
To fix this issue properly, we need to handle the lifetime of
smb_lock->clist across three paths:
- Safely skip clist deletion when list is empty and fp->conn is NULL.
- Remove the lock from the old connection's lock_list in
session_fd_check()
- Re-add the lock to the new connection's lock_list in
ksmbd_reopen_durable_fd(). |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: MGMT: Fix dangling pointer on mgmt_add_adv_patterns_monitor_complete
This fixes the condition checking so mgmt_pending_valid is executed
whenever status != -ECANCELED otherwise calling mgmt_pending_free(cmd)
would kfree(cmd) without unlinking it from the list first, leaving a
dangling pointer. Any subsequent list traversal (e.g.,
mgmt_pending_foreach during __mgmt_power_off, or another
mgmt_pending_valid call) would dereference freed memory. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: idxd: Fix leaking event log memory
During the device remove process, the device is reset, causing the
configuration registers to go back to their default state, which is
zero. As the driver is checking if the event log support was enabled
before deallocating, it will fail if a reset happened before.
Do not check if the support was enabled, the check for 'idxd->evl'
being valid (only allocated if the HW capability is available) is
enough. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: MGMT: Fix memory leak in set_ssp_complete
Fix memory leak in set_ssp_complete() where mgmt_pending_cmd structures
are not freed after being removed from the pending list.
Commit 302a1f674c00 ("Bluetooth: MGMT: Fix possible UAFs") replaced
mgmt_pending_foreach() calls with individual command handling but missed
adding mgmt_pending_free() calls in both error and success paths of
set_ssp_complete(). Other completion functions like set_le_complete()
were fixed correctly in the same commit.
This causes a memory leak of the mgmt_pending_cmd structure and its
associated parameter data for each SSP command that completes.
Add the missing mgmt_pending_free(cmd) calls in both code paths to fix
the memory leak. Also fix the same issue in set_advertising_complete(). |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: reserve enough transaction items for qgroup ioctls
Currently our qgroup ioctls don't reserve any space, they just do a
transaction join, which does not reserve any space, neither for the quota
tree updates nor for the delayed refs generated when updating the quota
tree. The quota root uses the global block reserve, which is fine most of
the time since we don't expect a lot of updates to the quota root, or to
be too close to -ENOSPC such that other critical metadata updates need to
resort to the global reserve.
However this is not optimal, as not reserving proper space may result in a
transaction abort due to not reserving space for delayed refs and then
abusing the use of the global block reserve.
For example, the following reproducer (which is unlikely to model any
real world use case, but just to illustrate the problem), triggers such a
transaction abort due to -ENOSPC when running delayed refs:
$ cat test.sh
#!/bin/bash
DEV=/dev/nullb0
MNT=/mnt/nullb0
umount $DEV &> /dev/null
# Limit device to 1G so that it's much faster to reproduce the issue.
mkfs.btrfs -f -b 1G $DEV
mount -o commit=600 $DEV $MNT
fallocate -l 800M $MNT/filler
btrfs quota enable $MNT
for ((i = 1; i <= 400000; i++)); do
btrfs qgroup create 1/$i $MNT
done
umount $MNT
When running this, we can see in dmesg/syslog that a transaction abort
happened:
[436.490] BTRFS error (device nullb0): failed to run delayed ref for logical 30408704 num_bytes 16384 type 176 action 1 ref_mod 1: -28
[436.493] ------------[ cut here ]------------
[436.494] BTRFS: Transaction aborted (error -28)
[436.495] WARNING: fs/btrfs/extent-tree.c:2247 at btrfs_run_delayed_refs+0xd9/0x110 [btrfs], CPU#4: umount/2495372
[436.497] Modules linked in: btrfs loop (...)
[436.508] CPU: 4 UID: 0 PID: 2495372 Comm: umount Tainted: G W 6.19.0-rc8-btrfs-next-225+ #1 PREEMPT(full)
[436.510] Tainted: [W]=WARN
[436.511] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014
[436.513] RIP: 0010:btrfs_run_delayed_refs+0xdf/0x110 [btrfs]
[436.514] Code: 0f 82 ea (...)
[436.518] RSP: 0018:ffffd511850b7d78 EFLAGS: 00010292
[436.519] RAX: 00000000ffffffe4 RBX: ffff8f120dad37e0 RCX: 0000000002040001
[436.520] RDX: 0000000000000002 RSI: 00000000ffffffe4 RDI: ffffffffc090fd80
[436.522] RBP: 0000000000000000 R08: 0000000000000001 R09: ffffffffc04d1867
[436.523] R10: ffff8f18dc1fffa8 R11: 0000000000000003 R12: ffff8f173aa89400
[436.524] R13: 0000000000000000 R14: ffff8f173aa89400 R15: 0000000000000000
[436.526] FS: 00007fe59045d840(0000) GS:ffff8f192e22e000(0000) knlGS:0000000000000000
[436.527] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[436.528] CR2: 00007fe5905ff2b0 CR3: 000000060710a002 CR4: 0000000000370ef0
[436.530] Call Trace:
[436.530] <TASK>
[436.530] btrfs_commit_transaction+0x73/0xc00 [btrfs]
[436.531] ? btrfs_attach_transaction_barrier+0x1e/0x70 [btrfs]
[436.532] sync_filesystem+0x7a/0x90
[436.533] generic_shutdown_super+0x28/0x180
[436.533] kill_anon_super+0x12/0x40
[436.534] btrfs_kill_super+0x12/0x20 [btrfs]
[436.534] deactivate_locked_super+0x2f/0xb0
[436.534] cleanup_mnt+0xea/0x180
[436.535] task_work_run+0x58/0xa0
[436.535] exit_to_user_mode_loop+0xed/0x480
[436.536] ? __x64_sys_umount+0x68/0x80
[436.536] do_syscall_64+0x2a5/0xf20
[436.537] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[436.537] RIP: 0033:0x7fe5906b6217
[436.538] Code: 0d 00 f7 (...)
[436.540] RSP: 002b:00007ffcd87a61f8 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6
[436.541] RAX: 0000000000000000 RBX: 00005618b9ecadc8 RCX: 00007fe5906b6217
[436.541] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00005618b9ecb100
[436.542] RBP: 0000000000000000 R08: 00007ffcd87a4fe0 R09: 00000000ffffffff
[436.544] R10: 0000000000000103 R11:
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
lib/crypto: chacha: Zeroize permuted_state before it leaves scope
Since the ChaCha permutation is invertible, the local variable
'permuted_state' is sufficient to compute the original 'state', and thus
the key, even after the permutation has been done.
While the kernel is quite inconsistent about zeroizing secrets on the
stack (and some prominent userspace crypto libraries don't bother at all
since it's not guaranteed to work anyway), the kernel does try to do it
as a best practice, especially in cases involving the RNG.
Thus, explicitly zeroize 'permuted_state' before it goes out of scope. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: SMP: force responder MITM requirements before building the pairing response
smp_cmd_pairing_req() currently builds the pairing response from the
initiator auth_req before enforcing the local BT_SECURITY_HIGH
requirement. If the initiator omits SMP_AUTH_MITM, the response can
also omit it even though the local side still requires MITM.
tk_request() then sees an auth value without SMP_AUTH_MITM and may
select JUST_CFM, making method selection inconsistent with the pairing
policy the responder already enforces.
When the local side requires HIGH security, first verify that MITM can
be achieved from the IO capabilities and then force SMP_AUTH_MITM in the
response in both rsp.auth_req and auth. This keeps the responder auth bits
and later method selection aligned. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: reject direct access to nullable PTR_TO_BUF pointers
check_mem_access() matches PTR_TO_BUF via base_type() which strips
PTR_MAYBE_NULL, allowing direct dereference without a null check.
Map iterator ctx->key and ctx->value are PTR_TO_BUF | PTR_MAYBE_NULL.
On stop callbacks these are NULL, causing a kernel NULL dereference.
Add a type_may_be_null() guard to the PTR_TO_BUF branch, matching the
existing PTR_TO_BTF_ID pattern. |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Fix SCX_KICK_WAIT deadlock by deferring wait to balance callback
SCX_KICK_WAIT busy-waits in kick_cpus_irq_workfn() using
smp_cond_load_acquire() until the target CPU's kick_sync advances. Because
the irq_work runs in hardirq context, the waiting CPU cannot reschedule and
its own kick_sync never advances. If multiple CPUs form a wait cycle, all
CPUs deadlock.
Replace the busy-wait in kick_cpus_irq_workfn() with resched_curr() to
force the CPU through do_pick_task_scx(), which queues a balance callback
to perform the wait. The balance callback drops the rq lock and enables
IRQs following the sched_core_balance() pattern, so the CPU can process
IPIs while waiting. The local CPU's kick_sync is advanced on entry to
do_pick_task_scx() and continuously during the wait, ensuring any CPU that
starts waiting for us sees the advancement and cannot form cyclic
dependencies. |
| In the Linux kernel, the following vulnerability has been resolved:
ice: ptp: don't WARN when controlling PF is unavailable
In VFIO passthrough setups, it is possible to pass through only a PF
which doesn't own the source timer. In that case the PTP controlling PF
(adapter->ctrl_pf) is never initialized in the VM, so ice_get_ctrl_ptp()
returns NULL and triggers WARN_ON() in ice_ptp_setup_pf().
Since this is an expected behavior in that configuration, replace
WARN_ON() with an informational message and return -EOPNOTSUPP. |
| In the Linux kernel, the following vulnerability has been resolved:
media: solo6x10: Check for out of bounds chip_id
Clang with CONFIG_UBSAN_SHIFT=y noticed a condition where a signed type
(literal "1" is an "int") could end up being shifted beyond 32 bits,
so instrumentation was added (and due to the double is_tw286x() call
seen via inlining), Clang decides the second one must now be undefined
behavior and elides the rest of the function[1]. This is a known problem
with Clang (that is still being worked on), but we can avoid the entire
problem by actually checking the existing max chip ID, and now there is
no runtime instrumentation added at all since everything is known to be
within bounds.
Additionally use an unsigned value for the shift to remove the
instrumentation even without the explicit bounds checking.
[hverkuil: fix checkpatch warning for is_tw286x] |
| In the Linux kernel, the following vulnerability has been resolved:
sched/fair: Fix zero_vruntime tracking fix
John reported that stress-ng-yield could make his machine unhappy and
managed to bisect it to commit b3d99f43c72b ("sched/fair: Fix
zero_vruntime tracking").
The combination of yield and that commit was specific enough to
hypothesize the following scenario:
Suppose we have 2 runnable tasks, both doing yield. Then one will be
eligible and one will not be, because the average position must be in
between these two entities.
Therefore, the runnable task will be eligible, and be promoted a full
slice (all the tasks do is yield after all). This causes it to jump over
the other task and now the other task is eligible and current is no
longer. So we schedule.
Since we are runnable, there is no {de,en}queue. All we have is the
__{en,de}queue_entity() from {put_prev,set_next}_task(). But per the
fingered commit, those two no longer move zero_vruntime.
All that moves zero_vruntime are tick and full {de,en}queue.
This means, that if the two tasks playing leapfrog can reach the
critical speed to reach the overflow point inside one tick's worth of
time, we're up a creek.
Additionally, when multiple cgroups are involved, there is no guarantee
the tick will in fact hit every cgroup in a timely manner. Statistically
speaking it will, but that same statistics does not rule out the
possibility of one cgroup not getting a tick for a significant amount of
time -- however unlikely.
Therefore, just like with the yield() case, force an update at the end
of every slice. This ensures the update is never more than a single
slice behind and the whole thing is within 2 lag bounds as per the
comment on entity_key(). |
| In the Linux kernel, the following vulnerability has been resolved:
USB: dummy-hcd: Fix locking/synchronization error
Syzbot testing was able to provoke an addressing exception and crash
in the usb_gadget_udc_reset() routine in
drivers/usb/gadgets/udc/core.c, resulting from the fact that the
routine was called with a second ("driver") argument of NULL. The bad
caller was set_link_state() in dummy_hcd.c, and the problem arose
because of a race between a USB reset and driver unbind.
These sorts of races were not supposed to be possible; commit
7dbd8f4cabd9 ("USB: dummy-hcd: Fix erroneous synchronization change"),
along with a few followup commits, was written specifically to prevent
them. As it turns out, there are (at least) two errors remaining in
the code. Another patch will address the second error; this one is
concerned with the first.
The error responsible for the syzbot crash occurred because the
stop_activity() routine will sometimes drop and then re-acquire the
dum->lock spinlock. A call to stop_activity() occurs in
set_link_state() when handling an emulated USB reset, after the test
of dum->ints_enabled and before the increment of dum->callback_usage.
This allowed another thread (doing a driver unbind) to sneak in and
grab the spinlock, and then clear dum->ints_enabled and dum->driver.
Normally this other thread would have to wait for dum->callback_usage
to go down to 0 before it would clear dum->driver, but in this case it
didn't have to wait since dum->callback_usage had not yet been
incremented.
The fix is to increment dum->callback_usage _before_ calling
stop_activity() instead of after. Then the thread doing the unbind
will not clear dum->driver until after the call to
usb_gadget_udc_reset() safely returns and dum->callback_usage has been
decremented again. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: don't send a 6E related command when not supported
MCC_ALLOWED_AP_TYPE_CMD is related to 6E support. Do not send it if the
device doesn't support 6E.
Apparently, the firmware is mistakenly advertising support for this
command even on AX201 which does not support 6E and then the firmware
crashes. |
| In the Linux kernel, the following vulnerability has been resolved:
interconnect: qcom: sm8450: Fix NULL pointer dereference in icc_link_nodes()
The change to dynamic IDs for SM8450 platform interconnects left two links
unconverted, fix it to avoid the NULL pointer dereference in runtime,
when a pointer to a destination interconnect is not valid:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008
<...>
Call trace:
icc_link_nodes+0x3c/0x100 (P)
qcom_icc_rpmh_probe+0x1b4/0x528
platform_probe+0x64/0xc0
really_probe+0xc4/0x2a8
__driver_probe_device+0x80/0x140
driver_probe_device+0x48/0x170
__device_attach_driver+0xc0/0x148
bus_for_each_drv+0x88/0xf0
__device_attach+0xb0/0x1c0
device_initial_probe+0x58/0x68
bus_probe_device+0x40/0xb8
deferred_probe_work_func+0x90/0xd0
process_one_work+0x15c/0x3c0
worker_thread+0x2e8/0x400
kthread+0x150/0x208
ret_from_fork+0x10/0x20
Code: 900310f4 911d6294 91008280 94176078 (f94002a0)
---[ end trace 0000000000000000 ]---
Kernel panic - not syncing: Oops: Fatal exception |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix NULL pointer dereference in dcn401_init_hw()
dcn401_init_hw() assumes that update_bw_bounding_box() is valid when
entering the update path. However, the existing condition:
((!fams2_enable && update_bw_bounding_box) || freq_changed)
does not guarantee this, as the freq_changed branch can evaluate to true
independently of the callback pointer.
This can result in calling update_bw_bounding_box() when it is NULL.
Fix this by separating the update condition from the pointer checks and
ensuring the callback, dc->clk_mgr, and bw_params are validated before
use.
Fixes the below:
../dc/hwss/dcn401/dcn401_hwseq.c:367 dcn401_init_hw() error: we previously assumed 'dc->res_pool->funcs->update_bw_bounding_box' could be null (see line 362)
(cherry picked from commit 86117c5ab42f21562fedb0a64bffea3ee5fcd477) |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: crypto: Use the correct destructor kfunc type
With CONFIG_CFI enabled, the kernel strictly enforces that indirect
function calls use a function pointer type that matches the target
function. I ran into the following type mismatch when running BPF
self-tests:
CFI failure at bpf_obj_free_fields+0x190/0x238 (target:
bpf_crypto_ctx_release+0x0/0x94; expected type: 0xa488ebfc)
Internal error: Oops - CFI: 00000000f2008228 [#1] SMP
...
As bpf_crypto_ctx_release() is also used in BPF programs and using
a void pointer as the argument would make the verifier unhappy, add
a simple stub function with the correct type and register it as the
destructor kfunc instead. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: accel: adxl380: Avoid reading more entries than present in FIFO
The interrupt handler reads FIFO entries in batches of N samples, where N
is the number of scan elements that have been enabled. However, the sensor
fills the FIFO one sample at a time, even when more than one channel is
enabled. Therefore,the number of entries reported by the FIFO status
registers may not be a multiple of N; if this number is not a multiple, the
number of entries read from the FIFO may exceed the number of entries
actually present.
To fix the above issue, round down the number of FIFO entries read from the
status registers so that it is always a multiple of N. |
