| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in the Dialer interface feature for ISDN connections in Cisco IOS XE Software for Cisco 4000 Series Integrated Services Routers (ISRs) could allow an unauthenticated, adjacent attacker to pass IPv4 traffic through an ISDN channel prior to successful PPP authentication. The vulnerability is due to insufficient validation of the state of the PPP IP Control Protocol (IPCP). An attacker could exploit this vulnerability by making an ISDN call to an affected device and sending traffic through the ISDN channel prior to successful PPP authentication. Alternatively, an unauthenticated, remote attacker could exploit this vulnerability by sending traffic through an affected device that is configured to exit via an ISDN connection for which both the Dialer interface and the Basic Rate Interface (BRI) have been configured, but the Challenge Handshake Authentication Protocol (CHAP) password for PPP does not match the remote end. A successful exploit could allow the attacker to pass IPv4 traffic through an unauthenticated ISDN connection for a few seconds, from initial ISDN call setup until PPP authentication fails. |
| A vulnerability in the web-based management interface of Cisco SPA100 Series Analog Telephone Adapters (ATAs) could allow an authenticated, remote attacker to view the contents of arbitrary files on an affected device. The vulnerability is due to improper input validation in the web-based management interface. An attacker could exploit this vulnerability by sending a crafted request to the web-based management interface of an affected device. A successful exploit could allow the attacker to retrieve the contents of arbitrary files on the device, possibly resulting in the disclosure of sensitive information. |
| A vulnerability in the web-based management interface of Cisco SPA100 Series Analog Telephone Adapters (ATAs) could allow an authenticated, remote attacker to access sensitive information on an affected device. The vulnerability is due to unsafe handling of user credentials. An attacker could exploit this vulnerability by viewing portions of the web-based management interface of an affected device. A successful exploit could allow the attacker to access administrative credentials and potentially gain elevated privileges by reusing stolen credentials on the affected device. |
| A vulnerability in the web-based management interface of Cisco SPA100 Series Analog Telephone Adapters (ATAs) could allow an authenticated, remote attacker to access sensitive information on an affected device. The vulnerability is due to improper restrictions on configuration information. An attacker could exploit this vulnerability by sending a request to an affected device through the web-based management interface. A successful exploit could allow the attacker to return running configuration information that could also include sensitive information. |
| A vulnerability in the implementation of a CLI diagnostic command in Cisco FXOS Software and Cisco NX-OS Software could allow an authenticated, local attacker to view sensitive system files that should be restricted. The attacker could use this information to conduct additional reconnaissance attacks. The vulnerability is due to incomplete role-based access control (RBAC) verification. An attacker could exploit this vulnerability by authenticating to the device and issuing a specific CLI diagnostic command with crafted user-input parameters. An exploit could allow the attacker to perform an arbitrary read of a file on the device, and the file may contain sensitive information. The attacker needs valid device credentials to exploit this vulnerability. |
| A vulnerability in the HTTP API of Cisco Enterprise Chat and Email could allow an unauthenticated, remote attacker to download files attached through chat sessions. The vulnerability is due to insufficient authentication mechanisms on the file download function of the API. An attacker could exploit this vulnerability by sending a crafted request to the API. A successful exploit could allow the attacker to download files that other users attach through the chat feature. This vulnerability affects versions prior to 12.0(1)ES1. |
| IBM Cloud Pak for Security (CP4S) 1.10.0.0 through 1.10.11.0 and IBM QRadar Suite Software 1.10.12.0 through 1.10.16.0could allow an authenticated user to obtain sensitive version information that could aid in further attacks against the system. IBM X-Force ID: 233665. |
| A vulnerability was found in TOTOLINK A3700R 9.1.2u.5822_B20200513 and classified as problematic. Affected by this issue is some unknown functionality of the file /cgi-bin/ExportSettings.sh of the component apmib Configuration Handler. The manipulation leads to information disclosure. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. VDB-272570 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| An issue was discovered in GitLab CE/EE affecting all versions starting from 15.6 prior to 17.0.5, starting from 17.1 prior to 17.1.3, and starting from 17.2 prior to 17.2.1 where it was possible to disclose limited information of an exported group or project to another user. |
| An information disclosure vulnerability in GitLab CE/EE in project/group exports affecting all versions from 15.4 prior to 17.0.5, 17.1 prior to 17.1.3, and 17.2 prior to 17.2.1 allows unauthorized users to view the resultant export. |
| Information exposure vulnerability in MESbook 20221021.03 version, the exploitation of which could allow a local attacker, with user privileges, to access different resources by changing the API value of the application. |
| CWE-200: Information Exposure vulnerability exists that could cause disclosure of
credentials when a specially crafted message is sent to the device. |
| An information disclosure vulnerability in SWG in versions 12.x prior to 12.2.10 and 11.x prior to 11.2.24 allows information stored in a customizable block page to be disclosed to third-party websites due to Same Origin Policy Bypass of browsers in certain scenarios. The risk is low, because other recommended default security policies such as URL categorization and GTI are in place in most policies to block access to uncategorized/high risk websites. Any information disclosed depends on how the customers have customized the block pages. |
| An exposure of sensitive information vulnerability in GitHub Enterprise Server would allow an attacker to enumerate the names of private repositories that utilize deploy keys. This vulnerability did not allow unauthorized access to any repository content besides the name. This vulnerability affected all versions of GitHub Enterprise Server prior to 3.14 and was fixed in versions 3.13.1, 3.12.6, 3.11.12, 3.10.14, and 3.9.17. This vulnerability was reported via the GitHub Bug Bounty program. |
| A Security Misconfiguration vulnerability in GitHub Enterprise Server allowed sensitive information disclosure to unauthorized users in GitHub Enterprise Server by exploiting organization ruleset feature. This attack required an organization member to explicitly change the visibility of a dependent repository from private to public. This vulnerability affected all versions of GitHub Enterprise Server prior to 3.14 and was fixed in versions 3.13.1, 3.12.6, 3.11.12, 3.10.14, and 3.9.17. This vulnerability was reported via the GitHub Bug Bounty program. |
| Vulnerability of insufficient permission verification in the NearLink module
Impact: Successful exploitation of this vulnerability may affect service confidentiality. |
| An issue was discovered in GitLab EE affecting all versions starting from 16.11 prior to 17.0.5, starting from 17.1 prior to 17.1.3, and starting from 17.2 prior to 17.2.1 where certain project-level analytics settings could be leaked in DOM to group members with Developer or higher roles. |
| Prior to 23.1, an information disclosure vulnerability exists within BeyondInsight which can allow an attacker to enumerate usernames. |
| Jellyfin is an open source self hosted media server. The Jellyfin user profile image upload accepts SVG files, allowing for a stored XSS attack against an admin user via a specially crafted malicious SVG file. When viewed by an admin outside of the Jellyfin Web UI (e.g. via "view image" in a browser), this malicious SVG file could interact with the browser's LocalStorage and retrieve an AccessToken, which in turn can be used in an API call to elevate the target user to a Jellyfin administrator. The actual attack vector is unlikely to be exploited, as it requires specific actions by the administrator to view the SVG image outside of Jellyfin's WebUI, i.e. it is not a passive attack. The underlying exploit mechanism is solved by PR #12490, which forces attached images (including the potential malicious SVG) to be treated as attachments and thus downloaded by browsers, rather than viewed. This prevents exploitation of the LocalStorage of the browser. This PR has been merged and the relevant code changes are included in release version 10.9.10. All users are advised to upgrade. |
| DuckDB is a SQL database management system. In versions 1.0.0 and prior, content in filesystem is accessible for reading using `sniff_csv`, even with `enable_external_access=false`. This vulnerability provides an attacker with access to filesystem even when access is expected to be disabled and other similar functions do NOT provide access. There seem to be two vectors to this vulnerability. First, access to files that should otherwise not be allowed. Second, the content from a file can be read (e.g. `/etc/hosts`, `proc/self/environ`, etc) even though that doesn't seem to be the intent of the sniff_csv function. A fix for this issue is available in commit c9b7c98aa0e1cd7363fe8bb8543a95f38e980d8a and is expected to be part of version 1.1.0. |
