| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix mismatched unlock for DMUB HW lock in HWSS fast path
[Why]
The evaluation for whether we need to use the DMUB HW lock isn't the
same as whether we need to unlock which results in a hang when the
fast path is used for ASIC without FAMS support.
[How]
Store a flag that indicates whether we should use the lock and use
that same flag to specify whether unlocking is needed. |
| tinytag is a Python library for reading audio file metadata. Version 2.2.0 allows an attacker who can supply MP3 files for parsing to trigger a non-terminating loop while the library parses an ID3v2 SYLT (synchronized lyrics) frame. In server-side deployments that automatically parse attacker-supplied files, a single 498-byte MP3 can cause the parsing operation to stop making progress and remain busy until the worker or process is terminated. The root cause is that _parse_synced_lyrics assumes _find_string_end_pos always returns a position greater than the current offset. That assumption is false when no string terminator is present in the remaining frame content. This issue has been fixed in version 2.2.1. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/slab: do not access current->mems_allowed_seq if !allow_spin
Lockdep complains when get_from_any_partial() is called in an NMI
context, because current->mems_allowed_seq is seqcount_spinlock_t and
not NMI-safe:
================================
WARNING: inconsistent lock state
6.19.0-rc5-kfree-rcu+ #315 Tainted: G N
--------------------------------
inconsistent {INITIAL USE} -> {IN-NMI} usage.
kunit_try_catch/9989 [HC1[1]:SC0[0]:HE0:SE1] takes:
ffff889085799820 (&____s->seqcount#3){.-.-}-{0:0}, at: ___slab_alloc+0x58f/0xc00
{INITIAL USE} state was registered at:
lock_acquire+0x185/0x320
kernel_init_freeable+0x391/0x1150
kernel_init+0x1f/0x220
ret_from_fork+0x736/0x8f0
ret_from_fork_asm+0x1a/0x30
irq event stamp: 56
hardirqs last enabled at (55): [<ffffffff850a68d7>] _raw_spin_unlock_irq+0x27/0x70
hardirqs last disabled at (56): [<ffffffff850858ca>] __schedule+0x2a8a/0x6630
softirqs last enabled at (0): [<ffffffff81536711>] copy_process+0x1dc1/0x6a10
softirqs last disabled at (0): [<0000000000000000>] 0x0
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&____s->seqcount#3);
<Interrupt>
lock(&____s->seqcount#3);
*** DEADLOCK ***
According to Documentation/locking/seqlock.rst, seqcount_t is not
NMI-safe and seqcount_latch_t should be used when read path can interrupt
the write-side critical section. In this case, do not access
current->mems_allowed_seq and avoid retry. |
| Grav is a file-based Web platform. Prior to 2.0.0-beta.2, a business logic vulnerability in the Grav Admin Panel allows a low-privileged user (with only user creation permissions) to overwrite existing accounts, including the primary administrator. By creating a new user with a username that already exists, the system updates the existing account's metadata and permissions instead of rejecting the request. This leads to a Denial of Service (DoS) on administrative functions and Privilege De-escalation of the root account. This vulnerability is fixed in 2.0.0-beta.2. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Fix deadlock in l2cap_conn_del()
l2cap_conn_del() calls cancel_delayed_work_sync() for both info_timer
and id_addr_timer while holding conn->lock. However, the work functions
l2cap_info_timeout() and l2cap_conn_update_id_addr() both acquire
conn->lock, creating a potential AB-BA deadlock if the work is already
executing when l2cap_conn_del() takes the lock.
Move the work cancellations before acquiring conn->lock and use
disable_delayed_work_sync() to additionally prevent the works from
being rearmed after cancellation, consistent with the pattern used in
hci_conn_del(). |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: contpte: fix set_access_flags() no-op check for SMMU/ATS faults
contpte_ptep_set_access_flags() compared the gathered ptep_get() value
against the requested entry to detect no-ops. ptep_get() ORs AF/dirty
from all sub-PTEs in the CONT block, so a dirty sibling can make the
target appear already-dirty. When the gathered value matches entry, the
function returns 0 even though the target sub-PTE still has PTE_RDONLY
set in hardware.
For a CPU with FEAT_HAFDBS this gathered view is fine, since hardware may
set AF/dirty on any sub-PTE and CPU TLB behavior is effectively gathered
across the CONT range. But page-table walkers that evaluate each
descriptor individually (e.g. a CPU without DBM support, or an SMMU
without HTTU, or with HA/HD disabled in CD.TCR) can keep faulting on the
unchanged target sub-PTE, causing an infinite fault loop.
Gathering can therefore cause false no-ops when only a sibling has been
updated:
- write faults: target still has PTE_RDONLY (needs PTE_RDONLY cleared)
- read faults: target still lacks PTE_AF
Fix by checking each sub-PTE against the requested AF/dirty/write state
(the same bits consumed by __ptep_set_access_flags()), using raw
per-PTE values rather than the gathered ptep_get() view, before
returning no-op. Keep using the raw target PTE for the write-bit unfold
decision.
Per Arm ARM (DDI 0487) D8.7.1 ("The Contiguous bit"), any sub-PTE in a CONT
range may become the effective cached translation and software must
maintain consistent attributes across the range. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/vt-d: Skip dev-iotlb flush for inaccessible PCIe device without scalable mode
PCIe endpoints with ATS enabled and passed through to userspace
(e.g., QEMU, DPDK) can hard-lock the host when their link drops,
either by surprise removal or by a link fault.
Commit 4fc82cd907ac ("iommu/vt-d: Don't issue ATS Invalidation
request when device is disconnected") adds pci_dev_is_disconnected()
to devtlb_invalidation_with_pasid() so ATS invalidation is skipped
only when the device is being safely removed, but it applies only
when Intel IOMMU scalable mode is enabled.
With scalable mode disabled or unsupported, a system hard-lock
occurs when a PCIe endpoint's link drops because the Intel IOMMU
waits indefinitely for an ATS invalidation that cannot complete.
Call Trace:
qi_submit_sync
qi_flush_dev_iotlb
__context_flush_dev_iotlb.part.0
domain_context_clear_one_cb
pci_for_each_dma_alias
device_block_translation
blocking_domain_attach_dev
iommu_deinit_device
__iommu_group_remove_device
iommu_release_device
iommu_bus_notifier
blocking_notifier_call_chain
bus_notify
device_del
pci_remove_bus_device
pci_stop_and_remove_bus_device
pciehp_unconfigure_device
pciehp_disable_slot
pciehp_handle_presence_or_link_change
pciehp_ist
Commit 81e921fd3216 ("iommu/vt-d: Fix NULL domain on device release")
adds intel_pasid_teardown_sm_context() to intel_iommu_release_device(),
which calls qi_flush_dev_iotlb() and can also hard-lock the system
when a PCIe endpoint's link drops.
Call Trace:
qi_submit_sync
qi_flush_dev_iotlb
__context_flush_dev_iotlb.part.0
intel_context_flush_no_pasid
device_pasid_table_teardown
pci_pasid_table_teardown
pci_for_each_dma_alias
intel_pasid_teardown_sm_context
intel_iommu_release_device
iommu_deinit_device
__iommu_group_remove_device
iommu_release_device
iommu_bus_notifier
blocking_notifier_call_chain
bus_notify
device_del
pci_remove_bus_device
pci_stop_and_remove_bus_device
pciehp_unconfigure_device
pciehp_disable_slot
pciehp_handle_presence_or_link_change
pciehp_ist
Sometimes the endpoint loses connection without a link-down event
(e.g., due to a link fault); killing the process (virsh destroy)
then hard-locks the host.
Call Trace:
qi_submit_sync
qi_flush_dev_iotlb
__context_flush_dev_iotlb.part.0
domain_context_clear_one_cb
pci_for_each_dma_alias
device_block_translation
blocking_domain_attach_dev
__iommu_attach_device
__iommu_device_set_domain
__iommu_group_set_domain_internal
iommu_detach_group
vfio_iommu_type1_detach_group
vfio_group_detach_container
vfio_group_fops_release
__fput
pci_dev_is_disconnected() only covers safe-removal paths;
pci_device_is_present() tests accessibility by reading
vendor/device IDs and internally calls pci_dev_is_disconnected().
On a ConnectX-5 (8 GT/s, x2) this costs ~70 µs.
Since __context_flush_dev_iotlb() is only called on
{attach,release}_dev paths (not hot), add pci_device_is_present()
there to skip inaccessible devices and avoid the hard-lock. |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "PCI/IOV: Add PCI rescan-remove locking when enabling/disabling SR-IOV"
This reverts commit 05703271c3cd ("PCI/IOV: Add PCI rescan-remove locking
when enabling/disabling SR-IOV"), which causes a deadlock by recursively
taking pci_rescan_remove_lock when sriov_del_vfs() is called as part of
pci_stop_and_remove_bus_device(). For example with the following sequence
of commands:
$ echo <NUM> > /sys/bus/pci/devices/<pf>/sriov_numvfs
$ echo 1 > /sys/bus/pci/devices/<pf>/remove
A trimmed trace of the deadlock on a mlx5 device is as below:
zsh/5715 is trying to acquire lock:
000002597926ef50 (pci_rescan_remove_lock){+.+.}-{3:3}, at: sriov_disable+0x34/0x140
but task is already holding lock:
000002597926ef50 (pci_rescan_remove_lock){+.+.}-{3:3}, at: pci_stop_and_remove_bus_device_locked+0x24/0x80
...
Call Trace:
[<00000259778c4f90>] dump_stack_lvl+0xc0/0x110
[<00000259779c844e>] print_deadlock_bug+0x31e/0x330
[<00000259779c1908>] __lock_acquire+0x16c8/0x32f0
[<00000259779bffac>] lock_acquire+0x14c/0x350
[<00000259789643a6>] __mutex_lock_common+0xe6/0x1520
[<000002597896413c>] mutex_lock_nested+0x3c/0x50
[<00000259784a07e4>] sriov_disable+0x34/0x140
[<00000258f7d6dd80>] mlx5_sriov_disable+0x50/0x80 [mlx5_core]
[<00000258f7d5745e>] remove_one+0x5e/0xf0 [mlx5_core]
[<00000259784857fc>] pci_device_remove+0x3c/0xa0
[<000002597851012e>] device_release_driver_internal+0x18e/0x280
[<000002597847ae22>] pci_stop_bus_device+0x82/0xa0
[<000002597847afce>] pci_stop_and_remove_bus_device_locked+0x5e/0x80
[<00000259784972c2>] remove_store+0x72/0x90
[<0000025977e6661a>] kernfs_fop_write_iter+0x15a/0x200
[<0000025977d7241c>] vfs_write+0x24c/0x300
[<0000025977d72696>] ksys_write+0x86/0x110
[<000002597895b61c>] __do_syscall+0x14c/0x400
[<000002597896e0ee>] system_call+0x6e/0x90
This alone is not a complete fix as it restores the issue the cited commit
tried to solve. A new fix will be provided as a follow on. |
| barebox version prior to 2026.04.0 contains a denial-of-service vulnerability in ext4 directory parsing in fs/ext4/ext4_common.c where the ext4fs_iterate_dir() function fails to validate that directory entry length values are non-zero. Attackers can supply a malicious ext4 filesystem image with a crafted directory entry containing a direntlen value of 0 to cause an infinite loop during directory listing or path resolution, resulting in the boot process hanging indefinitely. |
| When a Client SSL profile is configured with Allow Dynamic Record Sizing on a UDP virtual server, undisclosed traffic can cause the Traffic Management Microkernel (TMM) to terminate.
Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| When embedded Packet Velocity Acceleration (ePVA) acceleration is configured, undisclosed local ethernet traffic can cause an increase in ePVA and Traffic Management Microkernel (TMM) resource utilization. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| When processing HTTP/2 SETTINGS frames, transport will enter an infinite loop of writing CONTINUATION frames if it receives a SETTINGS_MAX_FRAME_SIZE with a value of 0. |
| lwjson 1.8.1 contains an improper input validation vulnerability in the streaming JSON parser (lwjson_stream.c). The end-of-string detection logic incorrectly identifies escaped quote characters by only checking the immediately preceding character rather than counting consecutive backslashes, causing valid JSON strings ending with an escaped backslash (like "\\") to never terminate parsing. A remote attacker can send well-formed JSON to cause applications using lwjson_stream_parse() to hang indefinitely, resulting in denial of service. |
| A Denial of Service (DoS) vulnerability in the DNSSEC validation of dnsmasq allows remote attackers to cause a denial of service via a crafted DNS packet. |
| Pillow is a Python imaging library. From version 4.2.0 to before version 12.2.0, an attacker can supply a malicious PDF that causes the process to hang indefinitely, consuming 100% CPU and making the application unresponsive. This issue has been patched in version 12.2.0. |
| In PHP versions 8.2.* before 8.2.31, 8.3.* before 8.3.31, 8.4.* before 8.4.21, and 8.5.* before 8.5.6, some functions, including urldecode(), pass signed char to ctype functions (like isxdigit()). On the systems with default signed char and optimized table-lookup ctype functions - such as NetBSD - this can lead to accessing array with negative offset, which can trigger a denial of service. |
| In PHP versions 8.4.* before 8.4.21 and 8.5.* before 8.5.6, DOMNode::C14N() method may process the XML data incorrectly, causing a circular linked list in the data structure representing the XML document. This may cause subsequent processing of the XML document to enter infinite loop, causing denial of service in the processing application. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/pxp: Clear restart flag in pxp_start after jumping back
If we don't clear the flag we'll keep jumping back at the beginning of
the function once we reach the end.
(cherry picked from commit 0850ec7bb2459602351639dccf7a68a03c9d1ee0) |
| In the Linux kernel, the following vulnerability has been resolved:
netlink: avoid infinite retry looping in netlink_unicast()
netlink_attachskb() checks for the socket's read memory allocation
constraints. Firstly, it has:
rmem < READ_ONCE(sk->sk_rcvbuf)
to check if the just increased rmem value fits into the socket's receive
buffer. If not, it proceeds and tries to wait for the memory under:
rmem + skb->truesize > READ_ONCE(sk->sk_rcvbuf)
The checks don't cover the case when skb->truesize + sk->sk_rmem_alloc is
equal to sk->sk_rcvbuf. Thus the function neither successfully accepts
these conditions, nor manages to reschedule the task - and is called in
retry loop for indefinite time which is caught as:
rcu: INFO: rcu_sched self-detected stall on CPU
rcu: 0-....: (25999 ticks this GP) idle=ef2/1/0x4000000000000000 softirq=262269/262269 fqs=6212
(t=26000 jiffies g=230833 q=259957)
NMI backtrace for cpu 0
CPU: 0 PID: 22 Comm: kauditd Not tainted 5.10.240 #68
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-4.fc42 04/01/2014
Call Trace:
<IRQ>
dump_stack lib/dump_stack.c:120
nmi_cpu_backtrace.cold lib/nmi_backtrace.c:105
nmi_trigger_cpumask_backtrace lib/nmi_backtrace.c:62
rcu_dump_cpu_stacks kernel/rcu/tree_stall.h:335
rcu_sched_clock_irq.cold kernel/rcu/tree.c:2590
update_process_times kernel/time/timer.c:1953
tick_sched_handle kernel/time/tick-sched.c:227
tick_sched_timer kernel/time/tick-sched.c:1399
__hrtimer_run_queues kernel/time/hrtimer.c:1652
hrtimer_interrupt kernel/time/hrtimer.c:1717
__sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1113
asm_call_irq_on_stack arch/x86/entry/entry_64.S:808
</IRQ>
netlink_attachskb net/netlink/af_netlink.c:1234
netlink_unicast net/netlink/af_netlink.c:1349
kauditd_send_queue kernel/audit.c:776
kauditd_thread kernel/audit.c:897
kthread kernel/kthread.c:328
ret_from_fork arch/x86/entry/entry_64.S:304
Restore the original behavior of the check which commit in Fixes
accidentally missed when restructuring the code.
Found by Linux Verification Center (linuxtesting.org). |
| In the Linux kernel, the following vulnerability has been resolved:
exfat: fix the infinite loop in exfat_readdir()
If the file system is corrupted so that a cluster is linked to
itself in the cluster chain, and there is an unused directory
entry in the cluster, 'dentry' will not be incremented, causing
condition 'dentry < max_dentries' unable to prevent an infinite
loop.
This infinite loop causes s_lock not to be released, and other
tasks will hang, such as exfat_sync_fs().
This commit stops traversing the cluster chain when there is unused
directory entry in the cluster to avoid this infinite loop. |
