| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid1: fix memory leak in raid1_run()
raid1_run() calls setup_conf() which registers a thread via
md_register_thread(). If raid1_set_limits() fails, the previously
registered thread is not unregistered, resulting in a memory leak
of the md_thread structure and the thread resource itself.
Add md_unregister_thread() to the error path to properly cleanup
the thread, which aligns with the error handling logic of other paths
in this function.
Compile tested only. Issue found using a prototype static analysis tool
and code review. |
| In the Linux kernel, the following vulnerability has been resolved:
fat: avoid parent link count underflow in rmdir
Corrupted FAT images can leave a directory inode with an incorrect
i_nlink (e.g. 2 even though subdirectories exist). rmdir then
unconditionally calls drop_nlink(dir) and can drive i_nlink to 0,
triggering the WARN_ON in drop_nlink().
Add a sanity check in vfat_rmdir() and msdos_rmdir(): only drop the
parent link count when it is at least 3, otherwise report a filesystem
error. |
| In the Linux kernel, the following vulnerability has been resolved:
ovpn: tcp - don't deref NULL sk_socket member after tcp_close()
When deleting a peer in case of keepalive expiration, the peer is
removed from the OpenVPN hashtable and is temporary inserted in a
"release list" for further processing.
This happens in:
ovpn_peer_keepalive_work()
unlock_ovpn(release_list)
This processing includes detaching from the socket being used to
talk to this peer, by restoring its original proto and socket
ops/callbacks.
In case of TCP it may happen that, while the peer is sitting in
the release list, userspace decides to close the socket.
This will result in a concurrent execution of:
tcp_close(sk)
__tcp_close(sk)
sock_orphan(sk)
sk_set_socket(sk, NULL)
The last function call will set sk->sk_socket to NULL.
When the releasing routine is resumed, ovpn_tcp_socket_detach()
will attempt to dereference sk->sk_socket to restore its original
ops member. This operation will crash due to sk->sk_socket being NULL.
Fix this race condition by testing-and-accessing
sk->sk_socket atomically under sk->sk_callback_lock. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Fix memory leak in amdxdna_ubuf_map
The amdxdna_ubuf_map() function allocates memory for sg and
internal sg table structures, but it fails to free them if subsequent
operations (sg_alloc_table_from_pages or dma_map_sgtable) fail. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: intel-ish-hid: fix NULL-ptr-deref in ishtp_bus_remove_all_clients
During a warm reset flow, the cl->device pointer may be NULL if the
reset occurs while clients are still being enumerated. Accessing
cl->device->reference_count without a NULL check leads to a kernel panic.
This issue was identified during multi-unit warm reboot stress clycles.
Add a defensive NULL check for cl->device to ensure stability under
such intensive testing conditions.
KASAN: null-ptr-deref in range [0000000000000000-0000000000000007]
Workqueue: ish_fw_update_wq fw_reset_work_fn
Call Trace:
ishtp_bus_remove_all_clients+0xbe/0x130 [intel_ishtp]
ishtp_reset_handler+0x85/0x1a0 [intel_ishtp]
fw_reset_work_fn+0x8a/0xc0 [intel_ish_ipc] |
| In the Linux kernel, the following vulnerability has been resolved:
net: bridge: use a stable FDB dst snapshot in RCU readers
Local FDB entries can be rewritten in place by `fdb_delete_local()`, which
updates `f->dst` to another port or to `NULL` while keeping the entry
alive. Several bridge RCU readers inspect `f->dst`, including
`br_fdb_fillbuf()` through the `brforward_read()` sysfs path.
These readers currently load `f->dst` multiple times and can therefore
observe inconsistent values across the check and later dereference.
In `br_fdb_fillbuf()`, this means a concurrent local-FDB update can change
`f->dst` after the NULL check and before the `port_no` dereference,
leading to a NULL-ptr-deref.
Fix this by taking a single `READ_ONCE()` snapshot of `f->dst` in each
affected RCU reader and using that snapshot for the rest of the access
sequence. Also publish the in-place `f->dst` updates in `fdb_delete_local()`
with `WRITE_ONCE()` so the readers and writer use matching access patterns. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw88: check for PCI upstream bridge existence
pci_upstream_bridge() returns NULL if the device is on a root bus. If
8821CE is installed in the system with such a PCI topology, the probing
routine will crash. This has probably been unnoticed as 8821CE is mostly
supplied in laptops where there is a PCI-to-PCI bridge located upstream
from the device. However the card might be installed on a system with
different configuration.
Check if the bridge does exist for the specific workaround to be applied.
Found by Linux Verification Center (linuxtesting.org) with Svace static
analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
tpm2-sessions: Fix missing tpm_buf_destroy() in tpm2_read_public()
tpm2_read_public() calls tpm_buf_init() but fails to call
tpm_buf_destroy() on two exit paths, leaking a page allocation:
1. When name_size() returns an error (unrecognized hash algorithm),
the function returns directly without destroying the buffer.
2. On the success path, the buffer is never destroyed before
returning.
All other error paths in the function correctly call
tpm_buf_destroy() before returning.
Fix both by adding the missing tpm_buf_destroy() calls. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: edt-ft5x06 - fix use-after-free in debugfs teardown
The commit 68743c500c6e ("Input: edt-ft5x06 - use per-client debugfs
directory") removed the manual debugfs teardown, relying on the I2C core
to handle it. However, this creates a window where debugfs files are
still accessible after edt_ft5x06_ts_teardown_debugfs() frees
tsdata->raw_buffer.
To prevent a use-after-free, protect the freeing of raw_buffer with the
device mutex and set raw_buffer to NULL. The debugfs read function
already checks if raw_buffer is NULL under the same mutex, so this
safely avoids the use-after-free. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: do not account for OoO in mptcp_rcvbuf_grow()
MPTCP-level OoOs are physiological when multiple subflows are active
concurrently and will not cause retransmissions nor are caused by
drops.
Accounting for them in mptcp_rcvbuf_grow() causes the rcvbuf slowly
drifting towards tcp_rmem[2].
Remove such accounting. Note that subflows will still account for TCP-level
OoO when the MPTCP-level rcvbuf is propagated.
This also closes a subtle and very unlikely race condition with rcvspace
init; active sockets with user-space holding the msk-level socket lock,
could complete such initialization in the receive callback, after that the
first OoO data reaches the rcvbuf and potentially triggering a divide by
zero Oops. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: sca3000: Fix a resource leak in sca3000_probe()
spi->irq from request_threaded_irq() not released when
iio_device_register() fails. Add an return value check and jump to a
common error handler when iio_device_register() fails. |
| IBM HTTP Server 8.5, and 9.0 is vulnerable to remote code execution and denial of service in configurations with TLS mutual authentication (client authentication). |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/zcrx: fix user_struct uaf
io_free_rbuf_ring() usees a struct user_struct, which
io_zcrx_ifq_free() puts it down before destroying the ring. |
| In the Linux kernel, the following vulnerability has been resolved:
pinctrl: single: fix refcount leak in pcs_add_gpio_func()
of_parse_phandle_with_args() returns a device_node pointer with refcount
incremented in gpiospec.np. The loop iterates through all phandles but
never releases the reference, causing a refcount leak on each iteration.
Add of_node_put() calls to release the reference after extracting the
needed arguments and on the error path when devm_kzalloc() fails.
This bug was detected by our static analysis tool and verified by my
code review. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: csiostor: Fix dereference of null pointer rn
The error exit path when rn is NULL ends up deferencing the null pointer rn
via the use of the macro CSIO_INC_STATS. Fix this by adding a new error
return path label after the use of the macro to avoid the deference. |
| In the Linux kernel, the following vulnerability has been resolved:
phy: freescale: imx8qm-hsio: fix NULL pointer dereference
During the probe the refclk_pad pointer is set to NULL if the
'fsl,refclk-pad-mode' property is not defined in the devicetree node. But
in imx_hsio_configure_clk_pad() this pointer is unconditionally used which
could result in a NULL pointer dereference. So check the pointer before to
use it. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: fix NULL sock in aa_sock_file_perm
Deal with the potential that sock and sock-sk can be NULL during
socket setup or teardown. This could lead to an oops. The fix for NULL
pointer dereference in __unix_needs_revalidation shows this is at
least possible for af_unix sockets. While the fix for af_unix sockets
applies for newer mediation this is still the fall back path for older
af_unix mediation and other sockets, so ensure it is covered. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Fix race condition when checking rpm_on
When autosuspend is triggered, driver rpm_on flag is set to indicate that
a suspend/resume is already in progress. However, when a userspace
application submits a command during this narrow window,
amdxdna_pm_resume_get() may incorrectly skip the resume operation because
the rpm_on flag is still set. This results in commands being submitted
while the device has not actually resumed, causing unexpected behavior.
The set_dpm() is called by suspend/resume, it relied on rpm_on flag to
avoid calling into rpm suspend/resume recursivly. So to fix this, remove
the use of the rpm_on flag entirely. Instead, introduce aie2_pm_set_dpm()
which explicitly resumes the device before invoking set_dpm(). With this
change, set_dpm() is called directly inside the suspend or resume execution
path. Otherwise, aie2_pm_set_dpm() is called. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Fix potential NULL pointer dereference in context cleanup
aie_destroy_context() is invoked during error handling in
aie2_create_context(). However, aie_destroy_context() assumes that the
context's mailbox channel pointer is non-NULL. If mailbox channel
creation fails, the pointer remains NULL and calling aie_destroy_context()
can lead to a NULL pointer dereference.
In aie2_create_context(), replace aie_destroy_context() with a function
which request firmware to remove the context created previously. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: fix deadlock in ni_read_folio_cmpr
Syzbot reported a task hung in ni_readpage_cmpr (now ni_read_folio_cmpr).
This is caused by a lock inversion deadlock involving the inode mutex
(ni_lock) and page locks.
Scenario:
1. Task A enters ntfs_read_folio() for page X. It acquires ni_lock.
2. Task A calls ni_read_folio_cmpr(), which attempts to lock all pages in
the compressed frame (including page Y).
3. Concurrently, Task B (e.g., via readahead) has locked page Y and
calls ntfs_read_folio().
4. Task B waits for ni_lock (held by A).
5. Task A waits for page Y lock (held by B).
-> DEADLOCK.
The fix is to restructure locking: do not take ni_lock in ntfs_read_folio().
Instead, acquire ni_lock inside ni_read_folio_cmpr() ONLY AFTER all required
page locks for the frame have been successfully acquired. This restores the
correct lock ordering (Page Lock -> ni_lock) consistent with VFS.
[almaz.alexandrovich@paragon-software.com: ni_readpage_cmpr was renamed to ni_read_folio_cmpr] |
