| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A NULL Pointer Dereference vulnerability in DumpTS v0.1.0-nightly allows attackers to cause a denial of service via the function VerifyCommandLine() at /src/DumpTS.cpp. |
| Due to the memory corruption vulnerability in SAP NetWeaver AS ABAP and ABAP Platform, an unauthenticated attacker can send a corrupted SAP Logon Ticket or SAP Assertion Ticket to the SAP application server. This leads to a dereference of NULL which makes the work process crash. As a result, it has a low impact on the availability but no impact on the confidentiality and integrity. |
| NanoMQ MQTT Broker (NanoMQ) is an all-around Edge Messaging Platform. In NanoMQ version 0.24.6, after enabling auth.http_auth (HTTP authentication), when a client connects to the broker using MQTT CONNECT without providing username/password, and the configuration params uses the placeholders %u / %P (e.g., username="%u", password="%P"), the HTTP request construction phase enters auth_http.c:set_data(). This results in calling strlen() on a NULL pointer, causing a SIGSEGV crash. This crash can be triggered remotely, resulting in a denial of service. This issue has been patched in version 0.24.7. |
| Null pointer dereference in Microsoft Graphics Component allows an unauthorized attacker to deny service locally. |
| Null pointer dereference in Windows Performance Counters allows an authorized attacker to elevate privileges locally. |
| Null pointer dereference in Windows Ancillary Function Driver for WinSock allows an authorized attacker to elevate privileges locally. |
| Suricata is a network IDS, IPS and NSM engine. From version 8.0.0 to before version 8.0.4, use of the "tls.alpn" rule keyword can cause Suricata to crash with a NULL dereference. This issue has been patched in version 8.0.4. |
| Ella Core is a 5G core designed for private networks. Prior to version 1.8.0, Ella Core panics when processing a NGAP handover failure message. An attacker able to cause a gNodeB to send NGAP handover failure messages to Ella Core can crash the process, causing service disruption for all connected subscribers. This issue has been patched in version 1.8.0. |
| A race condition during TCP connection teardown can cause tcp_recv() to operate on a connection that has already been released. If tcp_conn_search() returns NULL while processing a SYN packet, a NULL pointer derived from stale context data is passed to tcp_backlog_is_full() and dereferenced without validation, leading to a crash. |
| An issue was discovered in Mbed TLS through 3.6.5 and 4.x through 4.0.0. There is a NULL pointer dereference in distinguished name parsing that allows an attacker to write to address 0. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: allow ext4_get_group_info() to fail
Previously, ext4_get_group_info() would treat an invalid group number
as BUG(), since in theory it should never happen. However, if a
malicious attaker (or fuzzer) modifies the superblock via the block
device while it is the file system is mounted, it is possible for
s_first_data_block to get set to a very large number. In that case,
when calculating the block group of some block number (such as the
starting block of a preallocation region), could result in an
underflow and very large block group number. Then the BUG_ON check in
ext4_get_group_info() would fire, resutling in a denial of service
attack that can be triggered by root or someone with write access to
the block device.
For a quality of implementation perspective, it's best that even if
the system administrator does something that they shouldn't, that it
will not trigger a BUG. So instead of BUG'ing, ext4_get_group_info()
will call ext4_error and return NULL. We also add fallback code in
all of the callers of ext4_get_group_info() that it might NULL.
Also, since ext4_get_group_info() was already borderline to be an
inline function, un-inline it. The results in a next reduction of the
compiled text size of ext4 by roughly 2k. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Harden uplink netdev access against device unbind
The function mlx5_uplink_netdev_get() gets the uplink netdevice
pointer from mdev->mlx5e_res.uplink_netdev. However, the netdevice can
be removed and its pointer cleared when unbound from the mlx5_core.eth
driver. This results in a NULL pointer, causing a kernel panic.
BUG: unable to handle page fault for address: 0000000000001300
at RIP: 0010:mlx5e_vport_rep_load+0x22a/0x270 [mlx5_core]
Call Trace:
<TASK>
mlx5_esw_offloads_rep_load+0x68/0xe0 [mlx5_core]
esw_offloads_enable+0x593/0x910 [mlx5_core]
mlx5_eswitch_enable_locked+0x341/0x420 [mlx5_core]
mlx5_devlink_eswitch_mode_set+0x17e/0x3a0 [mlx5_core]
devlink_nl_eswitch_set_doit+0x60/0xd0
genl_family_rcv_msg_doit+0xe0/0x130
genl_rcv_msg+0x183/0x290
netlink_rcv_skb+0x4b/0xf0
genl_rcv+0x24/0x40
netlink_unicast+0x255/0x380
netlink_sendmsg+0x1f3/0x420
__sock_sendmsg+0x38/0x60
__sys_sendto+0x119/0x180
do_syscall_64+0x53/0x1d0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
Ensure the pointer is valid before use by checking it for NULL. If it
is valid, immediately call netdev_hold() to take a reference, and
preventing the netdevice from being freed while it is in use. |
| In the Linux kernel, the following vulnerability has been resolved:
can: gs_usb: fix time stamp counter initialization
If the gs_usb device driver is unloaded (or unbound) before the
interface is shut down, the USB stack first calls the struct
usb_driver::disconnect and then the struct net_device_ops::ndo_stop
callback.
In gs_usb_disconnect() all pending bulk URBs are killed, i.e. no more
RX'ed CAN frames are send from the USB device to the host. Later in
gs_can_close() a reset control message is send to each CAN channel to
remove the controller from the CAN bus. In this race window the USB
device can still receive CAN frames from the bus and internally queue
them to be send to the host.
At least in the current version of the candlelight firmware, the queue
of received CAN frames is not emptied during the reset command. After
loading (or binding) the gs_usb driver, new URBs are submitted during
the struct net_device_ops::ndo_open callback and the candlelight
firmware starts sending its already queued CAN frames to the host.
However, this scenario was not considered when implementing the
hardware timestamp function. The cycle counter/time counter
infrastructure is set up (gs_usb_timestamp_init()) after the USBs are
submitted, resulting in a NULL pointer dereference if
timecounter_cyc2time() (via the call chain:
gs_usb_receive_bulk_callback() -> gs_usb_set_timestamp() ->
gs_usb_skb_set_timestamp()) is called too early.
Move the gs_usb_timestamp_init() function before the URBs are
submitted to fix this problem.
For a comprehensive solution, we need to consider gs_usb devices with
more than 1 channel. The cycle counter/time counter infrastructure is
setup per channel, but the RX URBs are per device. Once gs_can_open()
of _a_ channel has been called, and URBs have been submitted, the
gs_usb_receive_bulk_callback() can be called for _all_ available
channels, even for channels that are not running, yet. As cycle
counter/time counter has not set up, this will again lead to a NULL
pointer dereference.
Convert the cycle counter/time counter from a "per channel" to a "per
device" functionality. Also set it up, before submitting any URBs to
the device.
Further in gs_usb_receive_bulk_callback(), don't process any URBs for
not started CAN channels, only resubmit the URB. |
| The issue was addressed with improved checks. This issue is fixed in Safari 18.5, iOS 18.5 and iPadOS 18.5, iPadOS 17.7.7, macOS Sequoia 15.5, tvOS 18.5, visionOS 2.5, watchOS 11.5. Processing maliciously crafted web content may lead to an unexpected process crash. |
| A null pointer dereference was addressed with improved input validation. This issue is fixed in iOS 18.7.7 and iPadOS 18.7.7, iOS 26.4 and iPadOS 26.4, macOS Sequoia 15.7.5, macOS Sonoma 14.8.5, macOS Tahoe 26.4, tvOS 26.4, visionOS 26.4, watchOS 26.4. A user in a privileged network position may be able to cause a denial-of-service. |
| LibJWT is a C JSON Web Token Library. Starting in version 3.0.0 and prior to version 3.3.0, the JWK parsing for RSA-PSS did not protect against a NULL value when expecting to parse JSON string values. A specially crafted JWK file could exploit this behavior by using integers in places where the code expected a string. This was fixed in v3.3.0. A workaround is available. Users importing keys through a JWK file should not do so from untrusted sources. Use the `jwk2key` tool to check for validity of a JWK file. Likewise, if possible, do not use JWK files with RSA-PSS keys. |
| When the ngx_mail_auth_http_module module is enabled on NGINX Plus or NGINX Open Source, undisclosed requests can cause worker processes to terminate. This issue may occur when (1) CRAM-MD5 or APOP authentication is enabled, and (2) the authentication server permits retry by returning the Auth-Wait response header. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| In Modem, there is a possible system crash due to incorrect error handling. This could lead to remote denial of service, if a UE has connected to a rogue base station controlled by the attacker, with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: MOLY01430930; Issue ID: MSV-4836. |
| libfuse is the reference implementation of the Linux FUSE. From version 3.18.0 to before version 3.18.2, a NULL pointer dereference and memory leak in fuse_uring_init_queue allows a local user to crash the FUSE daemon or cause resource exhaustion. When numa_alloc_local fails during io_uring queue entry setup, the code proceeds with NULL pointers. When fuse_uring_register_queue fails, NUMA allocations are leaked and the function incorrectly returns success. Only the io_uring transport is affected; the traditional /dev/fuse path is not affected. PoC confirmed with AddressSanitizer/LeakSanitizer. This issue has been patched in version 3.18.2. |
| NATS-Server is a High-Performance server for NATS.io, a cloud and edge native messaging system. Prior to versions 2.11.14 and 2.12.5, if the nats-server has the "leafnode" configuration enabled (not default), then anyone who can connect can crash the nats-server by triggering a panic. This happens pre-authentication and requires that compression be enabled (which it is, by default, when leafnodes are used). Versions 2.11.14 and 2.12.5 contain a fix. As a workaround, disable compression on the leafnode port. |
