| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
mei: bus: access mei_device under device_lock on cleanup
Fix couple of problems in mei_cl_bus_dev_release():
mei_cl_flush_queues() is running without lock.
bus->file_list access after mei_dev_bus_put(bus) can become a
use-after-free if this was the last reference to bus.
Protect queues cleanup and WARN traversal by device lock there
to avoid the concurrent access problems.
Move WARN traversal before mei_dev_bus_put(bus).
This file uses bus variable name for mei_device, adjust
code of mei_cl_bus_dev_release() to use bus variable too. |
| In the Linux kernel, the following vulnerability has been resolved:
misc: nsm: pin the module while the device is open
misc_open() installs a misc driver's file operations with fops_get(),
which pins file_operations::owner before replacing the file's f_op. The
NSM misc device leaves nsm_dev_fops.owner unset, so opening /dev/nsm does
not take a module reference on the nsm driver.
If the driver is built as a module, an open file descriptor can therefore
survive rmmod of the module that provides its ioctl callbacks. A later
ioctl through that descriptor can call into unloaded module text.
Set nsm_dev_fops.owner to THIS_MODULE so the misc core holds the module
while any /dev/nsm file descriptor is open, matching the lifetime
expectation for the installed file operations. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Delay module ref count for "enable_event" trigger
Triggers are now delayed from freeing, but can still be triggered until
after the RCU grace period has ended. The freeing of the enable_event data
is put into the private_data_free() callback, but the put of the module
refcount is done immediately.
It is possible that if a module is removed that has an event that would
enable (or disable) it is still active, it can read the data of the module
after it is removed causing a use-after-free bug.
Move the trace_event_put_ref() that releases the module into the delayed
callback so that the module can not be removed until any reference to its
events are finished. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix mmiotrace possible NULL dereferencing of hiter->dev
If the mmio_pipe_open() fails to find a PCI device, the hiter->dev
will be assigned to NULL. The mmiotrace read() function dereferences the
hiter->dev if hiter exists.
Change the test of the read to not only check hiter being NULL, but also
the hiter->dev before dereferencing it. |
| In the Linux kernel, the following vulnerability has been resolved:
ublk: wait on ublk_dev_ready() instead of ub->completion
ub->completion is only re-armed by a successful START_USER_RECOVERY. If
the ublk server sends END_USER_RECOVERY without one - e.g. its START
failed with -EBUSY and the error was ignored - the wait is satisfied by
the stale completion of the previous recovery cycle, and the device is
marked LIVE and the requeue list kicked while the FETCH stream is still
running and ubq->canceling is still set. The kick redispatches a
previously requeued request, __ublk_queue_rq_common() sees ->canceling
and parks it again via __ublk_abort_rq(), and after the last FETCH
clears ->canceling nothing ever kicks the requeue list again: the
request is stranded there while holding its tag. If it is the flush
machinery's flush_rq, every subsequent fsync piles up in uninterruptible
sleep and teardown hangs on tag draining. This matches a report of a
lost PREFLUSH with ext4 on top of ublk after daemon crash recovery.
ub->completion is an edge-triggered latch used as a proxy for the level
condition "every queue has fetched all I/O commands", which can regress
(F_BATCH's UNPREP, daemon death) and whose re-arm can be skipped. Drop
it and wait on the real condition instead: the new helper
ublk_wait_dev_ready_and_lock() waits on ublk_dev_ready() via
wait_var_event_interruptible(), woken from ublk_mark_io_ready(), then
re-checks it under ub->mutex, waiting again on regression, and returns
with the mutex held and readiness guaranteed.
Readiness becomes true in the same ub->mutex critical section that
clears the last queue's ->canceling, so END_USER_RECOVERY marks the
device LIVE and kicks the requeue list strictly after ->canceling
clears. The wait stays interruptible, so a server whose daemon died can
still be signalled out. For ublk_ctrl_start_dev() this replaces the
fail-fast -EINVAL on an F_BATCH ready->UNPREP regression with waiting
until the device is ready again. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: fix stale skb->sk reference on subflow close
The backlog list is updated by mptcp_data_ready() under
mptcp_data_lock(). The cleanup of backlog references to a closing
subflow, however, was performed in mptcp_close_ssk(), before
__mptcp_close_ssk() acquires the ssk lock, and while holding neither
the ssk lock nor mptcp_data_lock().
Because that traversal ran without mptcp_data_lock(), concurrent softirq
RX processing on another CPU (subflow_data_ready() -> mptcp_data_ready()
-> __mptcp_add_backlog(), under mptcp_data_lock()) could add a backlog
entry referencing the ssk while the cleanup loop was in progress. Such
an entry could be missed by the cleanup, or the concurrent list update
could corrupt the traversal, leaving skb->sk pointing at the ssk after
it is freed.
A later mptcp_backlog_purge() then dereferences the stale pointer,
triggering a warning in inet_sock_destruct() (ssk->sk_rmem_alloc != 0)
followed by a use-after-free in mptcp_backlog_purge().
Fix this by moving the backlog cleanup into __mptcp_close_ssk(), after
subflow->closing is set to 1 and while the ssk lock is still held,
serialized under mptcp_data_lock(). The cleanup runs only on the push
path (MPTCP_CF_PUSH), where backlog references accumulate; on other
teardown paths the caller already handles cleanup.
With subflow->closing set and mptcp_data_lock() held across the purge,
any concurrent mptcp_data_ready() either completes its enqueue before
the purge runs and is caught, or observes closing=1 and bails out. Once
mptcp_data_unlock() is reached, no new skb referencing the ssk can be
enqueued, so the cleanup is exhaustive.
Remove the unprotected traversal from mptcp_close_ssk() entirely. |
| Frappe is a full-stack web application framework. Prior to 16.20.0 and 15.112.0, unrestricted access to a Document Follow API (update_follow) is possible for an authenticated user.
This issue is fixed in versions 16.20.0 and 15.112.0. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: do not try compression for data reloc inodes
[BUG]
There is a syzbot report that the check inside get_new_location()
triggered:
BTRFS info (device loop0): found 31 extents, stage: move data extents
BTRFS info (device loop0): leaf 8908800 gen 16 total ptrs 28 free space 1676 owner 18446744073709551607
item 0 key (256 INODE_ITEM 0) itemoff 3835 itemsize 160
inode generation 5 transid 0 size 0 nbytes 0
block group 0 mode 40755 links 1 uid 0 gid 0
rdev 0 sequence 0 flags 0x0
atime 1669132761.0
ctime 1669132761.0
mtime 1669132761.0
otime 0.0
item 1 key (256 INODE_REF 256) itemoff 3823 itemsize 12
index 0 name_len 2
item 2 key (258 INODE_ITEM 0) itemoff 3663 itemsize 160
inode generation 1 transid 16 size 733184 nbytes 106496
block group 0 mode 100600 links 0 uid 0 gid 0
rdev 0 sequence 24 flags 0x18
item 3 key (258 EXTENT_DATA 0) itemoff 3595 itemsize 68
generation 16 type 0
inline extent data size 47 ram_bytes 4096 compression 1
[...]
item 27 key (18446744073709551611 ORPHAN_ITEM 258) itemoff 2376 itemsize 0
BTRFS error (device loop0): unexpected non-zero offset in file extent item for data reloc inode 258 key offset 0 offset 9277520992061368337
------------[ cut here ]------------
btrfs_abort_should_print_stack(__error)
[CAUSE]
The above dump tree shows the first file extent item is inlined, which
should make no sense for data reloc inodes, as such inodes just
represent where the data extents are in the relocation destination chunk.
However the relocation path preallocates space for each block,
then dirties them, cluster by cluster.
It's possible to have a single block at the beginning of the block
group, and no other block in the same cluster.
So relocation will preallocate a file extent for that block and dirty
the first block. Then memory pressure forces the data reloc inode to be
written back, before any other blocks are dirtied/allocated.
Finally commit 3eaf5f082c4c ("btrfs: extract inlined creation into a dedicated
delalloc helper") changed the sequence of delalloc. Before that commit we
always tried NOCOW first, so that dirtied block would be written back into
the preallocated space, and appear as a regular extent.
But with that commit, we always try inline first, and since compression
is forced, we try compressing the first block, and then inline the
compressed data, resulting in the above inlined file extent in the data
reloc tree.
Then the check in get_new_location() will check the file offset, without
checking if the file extent is inlined or not, resulting in the above
failure.
[FIX]
Do not allow compression for data reloc inodes.
Since data reloc inode sizes are always block aligned, as long as we do
not compress, @data_len will always be at least one block, and
that will cause can_cow_file_range_inline() to return false, thus no
inlined extent will be created. |
| In the Linux kernel, the following vulnerability has been resolved:
userfaultfd: prevent registration of special VMAs
Vova Tokarev says:
userfaultfd allows registration on shadow stack VMAs. With userfaultfd
access, you can register on the shadow stack, discard a page ... and
inject a page with chosen return addresses via UFFDIO_COPY.
Update vma_can_userfault() to reject VM_SHADOW_STACK.
While on it, also reject VM_SPECIAL so that if a driver would implement
vm_uffd_ops, it wouldn't be possible to register special VMAs with
userfaultfd.
Since VM_SPECIAL includes VM_DONTEXPAND which is set but hugetlb, exclude
hugetlb VMAs from the check for VM_SPECIAL. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/core: validate ranges in damon_set_regions()
DAMON core logic assumes zero length regions don't exist. However, a few
DAMON API callers including DAMON_SYSFS, DAMON_RECLAIM and DAMON_LRU_SORT
allow users to set empty monitoring target regions. This could result in
WARN_ONCE() on CONFIG_DAMON_DEBUG_SANITY enabled kernel, and
divide-by-zero from damon_merge_two_regions().
For example, the WANR_ONCE() can be triggered like below.
# grep DAMON_DEBUG_SANITY /boot/config-$(uname -r)
# CONFIG_DAMON_DEBUG_SANITY=y
# damo start
# cd /sys/kernel/mm/damon/admin/kdamonds/0
# echo 0 > contexts/0/targets/0/regions/0/start
# echo 0 > contexts/0/targets/0/regions/0/end
# echo commit > state
# dmesg
[....]
[ 73.705780] ------------[ cut here ]------------
[ 73.707552] start 0 >= end 0
[ 73.708452] WARNING: mm/damon/core.c:359 at damon_new_region+0x6e/0x80, CPU#1: kdamond.0/758
[...]
All DAMON API callers eventually use damon_set_regions() to setup the
regions. Add the validation logic in the function. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/page_vma_mapped: fix device-private PMD handling
Commit 65edfda6f3f2 ("mm/rmap: extend rmap and migration support
device-private entries") introduced the concept of device-private PMD
entries, but did not correctly update the rmap walk code to account for
them.
As a result, when page_vma_mapped_walk() encounters device-private PMD
entries, it takes no action other than to acquire the PMD lock and exit.
However this is highly problematic for two reasons - firstly, device
private entries possess a PFN so check_pmd() needs to be called to ensure
an overlapping PFN range.
Secondly, and more importantly, if PVMW_MIGRATION is set the caller
assumes the returned entry is a migration entry, resulting in memory
corruption when the caller tries to interpret the device private entry as
such.
In addition, commit 146287290023 ("mm/huge_memory: implement
device-private THP splitting") allowed device private PMDs to be split
like THP mappings, but again did not update this code path.
As a result, we might race a PMD split prior to acquiring the PMD lock.
This patch addresses all of these issues by invoking check_pmd(), ensuring
PMVW_MIGRATION is not set and checks whether a split raced us we do for
PMD THP and migration entries.
Instead of checking for a subset of the cases after taking the pmd_lock(),
put device-private along with pmd_trans_huge() and
pmd_is_migration_entry(). Also remove thp_migration_supported() as it is
already guarded by pmd_is_migration_entry().
[akpm@linux-foundation.org: fix Raspberry Pi 1 build, per David] |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: avoid auth_enable sysctl UAF during netns teardown
proc_sctp_do_auth() updates the SCTP control socket after changing
net.sctp.auth_enable. The handler gets the per-net SCTP state from
ctl->data, so an already opened sysctl file can still target a network
namespace while that namespace is being torn down.
SCTP previously registered its per-net sysctls from sctp_defaults_init(),
while the control socket is created later from sctp_ctrlsock_init(). This
exposed a window during initialization where auth_enable was writable
before net->sctp.ctl_sock existed, and a teardown window where auth_enable
stayed writable after inet_ctl_sock_destroy() had released the control
socket.
Move the per-net SCTP sysctl registration into sctp_ctrlsock_init() after
sctp_ctl_sock_init() succeeds, and unregister the sysctl table before
destroying the control socket in sctp_ctrlsock_exit(). If sysctl
registration fails after the control socket was created, destroy the
control socket in the same init path.
Make sctp_sysctl_net_unregister() tolerate a missing header and clear the
saved pointer so init-error and exit paths can safely share the unregister
helper. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: close UDP tunnel sockets during netns teardown
proc_sctp_do_udp_port() starts per-net SCTP UDP tunneling sockets when
net.sctp.udp_port is set, and stops/restarts them when the sysctl value
changes. The netns exit path does not stop these sockets, so a namespace
can be torn down while its SCTP UDP tunnel sockets are still installed.
Close the UDP tunnel sockets from sctp_ctrlsock_exit() after unregistering
the per-net sysctl table. This prevents new sysctl writes from racing in
while the sockets are being released, and closes the sockets before the
control socket is destroyed. |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: bound pg_{temp,upmap,upmap_items} length to CEPH_PG_MAX_SIZE
__decode_pg_temp() decodes an user-controlled length but only rejects
values large enough to overflow the allocation; it does not bound it to
CEPH_PG_MAX_SIZE. The helper backs both pg_temp and pg_upmap decoding, and
apply_upmap()/get_temp_osds() later copy the decoded list into the fixed-size
on-stack array struct ceph_osds.osds[CEPH_PG_MAX_SIZE]. A monitor that sends
an OSDMap with a pg_temp/pg_upmap entry longer than 32 thus causes a stack
out-of-bounds write.
An OSD set for a single PG can never exceed CEPH_PG_MAX_SIZE, so reject longer
entries at decode time. The bound is well below the old overflow threshold, so
it also covers the allocation-size overflow the previous check guarded against.
BUG: KASAN: stack-out-of-bounds in ceph_pg_to_up_acting_osds
Write of size 4 ... by task exploit
kasan_report (mm/kasan/report.c:595)
ceph_pg_to_up_acting_osds (net/ceph/osdmap.c:2617 net/ceph/osdmap.c:2833)
calc_target (net/ceph/osd_client.c:1638)
__submit_request (net/ceph/osd_client.c:2394)
ceph_osdc_start_request (net/ceph/osd_client.c:2490)
ceph_osdc_call (net/ceph/osd_client.c:5164)
rbd_dev_image_probe (drivers/block/rbd.c:6899)
do_rbd_add (drivers/block/rbd.c:7138)
...
kernel BUG at net/ceph/osdmap.c:2670!
[ idryomov: do the same in __decode_pg_upmap_items() ] |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: Fix multiplication overflow in decode_new_up_state_weight()
If a message of type CEPH_MSG_OSD_MAP contains a (maliciously) corrupted
osdmap, out-of-bounds memory accesses may occur in
decode_new_up_state_weight(). This happens because the bounds check for
the new_state part is based on calculating its length depending on a len
value read from the incoming message. This calculation may overflow
leading to an incorrect bounds check. Subsequently, out-of-bounds reads
may occur when decoding this part.
This patch switches the multiplication to use check_mul_overflow() to
abort processing the osdmap if an overflow occurred. Therefore,
osdmaps/messages containing large values for len that result in a
multiplication overflow are treated as invalid.
[ idryomov: rename new_state_len -> new_state_item_size, formatting ] |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: guard missing CRUSH type name lookup
Localized read selection can walk a parent bucket whose name exists in
the CRUSH map while its type has no matching entry in type_names.
get_immediate_parent() then dereferences a NULL type_cn and passes an
invalid pointer into strcmp(), causing a null-ptr-deref.
Skip such malformed parent buckets unless both the bucket name and type
name metadata are present. This keeps malformed hierarchy data from
crashing locality lookup and safely falls back to "not local".
[ idryomov: add WARN_ON_ONCE ] |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: refresh auth->authorizer_buf{,_len} after authorizer update
ceph_x_create_authorizer() caches au->buf->vec.iov_base and
au->buf->vec.iov_len in struct ceph_auth_handshake. These
cached values are then used by the messenger connect code when
sending the authorizer.
ceph_x_update_authorizer() can rebuild the authorizer when a newer
service ticket is available. If the rebuilt authorizer no longer
fits in the existing buffer, ceph_x_build_authorizer() drops its
reference to au->buf and allocates a new one. If this is the final
reference, ceph_buffer_put() frees the old ceph_buffer and its
vec.iov_base, but auth->authorizer_buf still points at that freed
memory.
A subsequent msgr1 reconnect can therefore queue the stale pointer
and trigger a KASAN slab-use-after-free in _copy_from_iter() while
tcp_sendmsg() copies the authorizer.
Refresh auth->authorizer_buf and auth->authorizer_buf_len after a
successful authorizer rebuild so the messenger sends the current
buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: Reject monmaps advertising zero monitors
A message of type CEPH_MSG_MON_MAP contains a monmap that is sent from a
monitor to the client. This monmap contains information about the
existing monitors in the cluster. Currently, a monmap indicating that
there are zero monitors in the cluster is treated as valid. However, it
is impossible to have zero monitors in the cluster and still receive a
valid monmap from a monitor. Therefore, such a monmap must be corrupted
and should be treated as invalid. Furthermore, a monmap with a monitor
count of zero can subsequently crash the client when attempting to open
a session with a monitor in __open_session(). This happens because the
"BUG_ON(monc->monmap->num_mon < 1)" assertion in pick_new_mon() is
triggered.
This patch extends a check in ceph_monmap_decode() to also reject
arriving mon_maps with num_mon == 0 rather than only with
num_mon > CEPH_MAX_MON.
[ idryomov: drop "log output for unusual values of num_mon" part ] |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: remove debugfs files before client teardown
ceph_destroy_client() tears down the monitor client before removing
the per-client debugfs files. A concurrent read of the monmap debugfs
file can enter monmap_show() after ceph_monc_stop() has freed
monc->monmap, triggering a use-after-free.
Remove the debugfs files before stopping the OSD and monitor clients.
debugfs_remove() drains active handlers and prevents new accesses, so
the debugfs callbacks can no longer race the rest of client teardown. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/super: fix emergency thaw double-unlock of s_umount
do_thaw_all() iterates over all superblocks via __iterate_supers()
with SUPER_ITER_EXCL, which acquires s_umount exclusively before
calling the callback and releases it afterwards. However, the
callback do_thaw_all_callback() calls thaw_super_locked() which
unconditionally releases s_umount on every code path. This results
in a second unlock attempt in __iterate_supers() that corrupts the
rwsem state, triggering a DEBUG_RWSEMS warning:
[ 182.601148] sysrq: Emergency Thaw of all frozen filesystems
[ 182.601865] ------------[ cut here ]------------
[ 182.602375] DEBUG_RWSEMS_WARN_ON((rwsem_owner(sem) != current) && !rwsem_test_oflags(sem, RWSEM_NONSPINNABLE)): count = 0x0, magic = 0xffff99b1011e5870, owner = 0x0, curr 0xffff99b101b06c80, list not empty
[ 182.603817] WARNING: kernel/locking/rwsem.c:1412 at up_write+0xa3/0x170, CPU#2: kworker/2:1/53
[ 182.604578] Modules linked in:
[ 182.604864] CPU: 2 UID: 0 PID: 53 Comm: kworker/2:1 Not tainted 7.2.0-rc4-00001-gbd3bd93ea98a-dirty #4 PREEMPT(lazy)
[ 182.605711] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1kylin1 04/01/2014
[ 182.606417] Workqueue: events do_thaw_all
[ 182.606750] RIP: 0010:up_write+0xaf/0x170
[ 182.607076] Code: 19 3a 92 48 0f 44 c2 48 8b 55 08 48 8b 55 00 4c 8b 45 08 48 8b 55 00 48 8d 3d ad 91 e0 01 48 8b 4d 20 50 48 c7 c6 f0 8c 26 92 <67> 48 0f b9 3a e8 d7 93 4e 00 58 eb 81 48 83 7f 18 00 48 c7 c2 8d
[ 182.608563] RSP: 0018:ffffb670001d7e08 EFLAGS: 00010246
[ 182.609007] RAX: ffffffff92349e8d RBX: 0000000000000000 RCX: ffff99b1011e5870
[ 182.609595] RDX: 0000000000000000 RSI: ffffffff92268cf0 RDI: ffffffff92914d10
[ 182.610283] RBP: ffff99b1011e5870 R08: 0000000000000000 R09: ffff99b101b06c80
[ 182.610847] R10: ffff99b10139a808 R11: fefefefefefefeff R12: 0000000000000000
[ 182.611414] R13: ffffffff90cf74d0 R14: 0000000000000000 R15: ffff99b1011e5800
[ 182.612009] FS: 0000000000000000(0000) GS:ffff99b1eaaee000(0000) knlGS:0000000000000000
[ 182.612670] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 182.613146] CR2: 00000000005c631c CR3: 00000000013ee000 CR4: 00000000000006f0
[ 182.613722] Call Trace:
[ 182.613946] <TASK>
[ 182.614130] __iterate_supers+0x128/0x150
[ 182.614463] do_thaw_all+0x1b/0x30
[ 182.614759] process_scheduled_works+0xbb/0x3f0
[ 182.615150] ? __pfx_worker_thread+0x10/0x10
[ 182.615499] worker_thread+0x129/0x270
[ 182.615816] ? __pfx_worker_thread+0x10/0x10
[ 182.616201] kthread+0xe2/0x120
[ 182.616469] ? __pfx_kthread+0x10/0x10
[ 182.616792] ret_from_fork+0x15b/0x240
[ 182.617115] ? __pfx_kthread+0x10/0x10
[ 182.617426] ret_from_fork_asm+0x1a/0x30
[ 182.617761] </TASK>
[ 182.617968] ---[ end trace 0000000000000000 ]---
[ 182.618412] Emergency Thaw complete
Fix this by switching to SUPER_ITER_UNLOCKED and acquiring s_umount
in the callback via super_lock_excl() before calling
thaw_super_locked(). This matches the locking pattern expected by
thaw_super_locked() and eliminates the double unlock.
While at it, remove the dead 'return;' at the end of
do_thaw_all_callback(). |
