| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in the Secure Copy Protocol (SCP) and SFTP feature of Cisco IOS XR Software could allow an authenticated, local attacker to create or overwrite files in a system directory, which could lead to a denial of service (DoS) condition. The attacker would require valid user credentials to perform this attack.
This vulnerability is due to a lack of proper validation of SCP and SFTP CLI input parameters. An attacker could exploit this vulnerability by authenticating to the device and issuing SCP or SFTP CLI commands with specific parameters. A successful exploit could allow the attacker to impact the functionality of the device, which could lead to a DoS condition. The device may need to be manually rebooted to recover.
Note: This vulnerability is exploitable only when a local user invokes SCP or SFTP commands at the Cisco IOS XR CLI. A local user with administrative privileges could exploit this vulnerability remotely. |
| A vulnerability in the CLI of the Cisco Integrated Management Controller (IMC) could allow an authenticated, local attacker to perform command injection attacks on the underlying operating system and elevate privileges to root. To exploit this vulnerability, the attacker must have read-only or higher privileges on an affected device. This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by submitting a crafted CLI command. A successful exploit could allow the attacker to elevate privileges to root. |
| A vulnerability in the Cisco FXOS CLI feature on specific hardware platforms for Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to elevate their administrative privileges to root. The attacker would need valid administrative credentials on the device to exploit this vulnerability. This vulnerability exists because certain system configurations and executable files have insecure storage and permissions. An attacker could exploit this vulnerability by authenticating on the device and then performing a series of steps that includes downloading malicious system files and accessing the Cisco FXOS CLI to configure the attack. A successful exploit could allow the attacker to obtain root access on the device. |
| A vulnerability in the web-based management interface of Cisco Unified Industrial Wireless Software for Cisco Ultra-Reliable Wireless Backhaul (URWB) Access Points could allow an unauthenticated, remote attacker to perform command injection attacks with root privileges on the underlying operating system.
This vulnerability is due to improper validation of input to the web-based management interface. An attacker could exploit this vulnerability by sending crafted HTTP requests to the web-based management interface of an affected system. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the underlying operating system of the affected device. |
| Tinycontrol LAN Controller v3 (LK3) firmware versions up to 1.58a (hardware v3.8) contain a missing authentication vulnerability in the stm.cgi endpoint. A remote, unauthenticated attacker can send crafted requests to forcibly reboot the device or restore factory settings, leading to a denial of service and configuration loss. |
| A vulnerability in the CLI of Cisco FTD Software could allow an authenticated, local attacker with administrative privileges to execute arbitrary commands with root privileges on the underlying operating system of an affected device.
This vulnerability is due to insufficient validation of user-supplied command arguments. An attacker could exploit this vulnerability by submitting crafted input to the affected commands. A successful exploit could allow the attacker to execute commands with root privileges on the underlying operating system.
Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. |
| A vulnerability in the ipsecmgr process of Cisco ASR 5000 Series Software (StarOS) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition.
This vulnerability is due to insufficient validation of incoming Internet Key Exchange Version 2 (IKEv2) packets. An attacker could exploit this vulnerability by sending specifically malformed IKEv2 packets to an affected device. A successful exploit could allow the attacker to cause the ipsecmgr process to restart, which would disrupt ongoing IKE negotiations and result in a temporary DoS condition.Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. |
| A vulnerability in the web-based management interface of Cisco Small Business RV042 Dual WAN VPN Routers and Cisco Small Business RV042G Dual Gigabit WAN VPN Routers could allow an unauthenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the web-based management interface of an affected device.
The vulnerability is due to insufficient validation of user-supplied input by the web-based management interface of the affected software. An attacker could exploit this vulnerability by persuading a user of the interface to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive browser-based information.Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. |
| A vulnerability in Cisco Catalyst Center Virtual Appliance could allow an authenticated, remote attacker to elevate privileges to Administrator on an affected system.
This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by submitting a crafted HTTP request to an affected system. A successful exploit could allow the attacker to perform unauthorized modifications to the system, including creating new user accounts or elevating their own privileges on an affected system. To exploit this vulnerability, the attacker must have valid credentials for a user account with at least the role of Observer. |
| A vulnerability in the API endpoints of Cisco Integrated Management Controller could allow an authenticated, remote attacker to bypass authorization and take actions on a vulnerable system without authorization.
The vulnerability is due to improper authorization checks on API endpoints. An attacker could exploit this vulnerability by sending malicious requests to an API endpoint. An exploit could allow the attacker to download files from or modify limited configuration options on the affected system.There are no workarounds that address this vulnerability. |
| A vulnerability in the local interface of Cisco BroadWorks Network Server could allow an unauthenticated, remote attacker to exhaust system resources, causing a denial of service (DoS) condition.
This vulnerability exists because rate limiting does not occur for certain incoming TCP connections. An attacker could exploit this vulnerability by sending a high rate of TCP connections to the server. A successful exploit could allow the attacker to cause TCP connection resources to grow rapidly until the Cisco BroadWorks Network Server becomes unusable.
Note: To recover from this vulnerability, either Cisco BroadWorks Network Server software must be restarted or the Cisco BroadWorks Network Server node must be rebooted. For more information, see the section of this advisory.
Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. |
| Multiple Cisco products are affected by a vulnerability in the Snort detection engine that could allow an unauthenticated, remote attacker to bypass a configured file policy for HTTP.
The vulnerability is due to incorrect handling of specific HTTP header parameters. An attacker could exploit this vulnerability by sending crafted HTTP packets through an affected device. A successful exploit could allow the attacker to bypass a configured file policy for HTTP packets and deliver a malicious payload. |
| A security vulnerability was discovered in the local status page functionality of Cisco Meraki’s MX67 and MX68 security appliance models that may allow unauthenticated individuals to access and download logs containing sensitive, privileged device information. The vulnerability is due to improper access control to the files holding debugging and maintenance information, and is only exploitable when the local status page is enabled on the device. An attacker exploiting this vulnerability may obtain access to wireless pre-shared keys, Site-to-Site VPN key and other sensitive information. Under certain circumstances, this information may allow an attacker to obtain administrative-level access to the device. |
| A vulnerability in the Protocol Independent Multicast Version 6 (PIM6) feature of Cisco Nexus 3000 Series Switches and Cisco Nexus 9000 Series Switches in standalone NX-OS mode could allow an authenticated, low-privileged, remote attacker to trigger a crash of the PIM6 process, resulting in a denial of service (DoS) condition.
This vulnerability is due to improper processing of PIM6 ephemeral data queries. An attacker could exploit this vulnerability by sending a crafted ephemeral query to an affected device through one of the following methods: NX-API REST, NETCONF, RESTConf, gRPC, or Model Driven Telemetry. A successful exploit could allow the attacker to cause the PIM6 process to crash and restart, causing potential adjacency flaps and resulting in a DoS of the PIM6 and ephemeral query processes. |
| A vulnerability in the logging feature of Cisco NX-OS Software for Cisco Nexus 3000 Series Switches, Cisco Nexus 9000 Series Switches in standalone NX-OS mode, Cisco UCS 6400 Fabric Interconnects, Cisco UCS 6500 Series Fabric Interconnects, and Cisco UCS 9108 100G Fabric Interconnects could allow an authenticated, local attacker access to sensitive information.
This vulnerability is due to improper logging of sensitive information. An attacker could exploit this vulnerability by accessing log files on the file system where they are stored. A successful exploit could allow the attacker to access sensitive information, such as stored credentials. |
| An issue was discovered in the ALFA Windows 10 driver 6.1316.1209 for AWUS036H. The Wi-Fi implementation does not verify the Message Integrity Check (authenticity) of fragmented TKIP frames. An adversary can abuse this to inject and possibly decrypt packets in WPA or WPA2 networks that support the TKIP data-confidentiality protocol. |
| An issue was discovered in the ALFA Windows 10 driver 6.1316.1209 for AWUS036H. The WEP, WPA, WPA2, and WPA3 implementations accept plaintext frames in a protected Wi-Fi network. An adversary can abuse this to inject arbitrary data frames independent of the network configuration. |
| An issue was discovered in the kernel in NetBSD 7.1. An Access Point (AP) forwards EAPOL frames to other clients even though the sender has not yet successfully authenticated to the AP. This might be abused in projected Wi-Fi networks to launch denial-of-service attacks against connected clients and makes it easier to exploit other vulnerabilities in connected clients. |
| The 802.11 standard that underpins Wi-Fi Protected Access (WPA, WPA2, and WPA3) and Wired Equivalent Privacy (WEP) doesn't require that the A-MSDU flag in the plaintext QoS header field is authenticated. Against devices that support receiving non-SSP A-MSDU frames (which is mandatory as part of 802.11n), an adversary can abuse this to inject arbitrary network packets. |
| A vulnerability in the web interface of Cisco Smart Software Manager On-Prem (SSM On-Prem) could allow an authenticated, remote attacker to elevate privileges on an affected system.
This vulnerability is due to the improper transmission of sensitive user information. An attacker could exploit this vulnerability by sending a crafted message to an affected Cisco SSM On-Prem host and retrieving session credentials from subsequent status messages. A successful exploit could allow the attacker to elevate privileges on the affected system from low to administrative.
To exploit this vulnerability, the attacker must have valid credentials for a user account with at least the role of System User.
Note: This vulnerability exposes information only about users who logged in to the Cisco SSM On-Prem host using the web interface and who are currently logged in. SSH sessions are not affected. |
