Export limit exceeded: 355899 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (44826 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-31410 | 1 Linux | 1 Linux Kernel | 2026-05-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: use volume UUID in FS_OBJECT_ID_INFORMATION Use sb->s_uuid for a proper volume identifier as the primary choice. For filesystems that do not provide a UUID, fall back to stfs.f_fsid obtained from vfs_statfs(). | ||||
| CVE-2026-43481 | 1 Linux | 1 Linux Kernel | 2026-05-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net-shapers: don't free reply skb after genlmsg_reply() genlmsg_reply() hands the reply skb to netlink, and netlink_unicast() consumes it on all return paths, whether the skb is queued successfully or freed on an error path. net_shaper_nl_get_doit() and net_shaper_nl_cap_get_doit() currently jump to free_msg after genlmsg_reply() fails and call nlmsg_free(msg), which can hit the same skb twice. Return the genlmsg_reply() error directly and keep free_msg only for pre-reply failures. | ||||
| CVE-2026-43380 | 1 Linux | 1 Linux Kernel | 2026-05-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (pmbus/q54sj108a2) fix stack overflow in debugfs read The q54sj108a2_debugfs_read function suffers from a stack buffer overflow due to incorrect arguments passed to bin2hex(). The function currently passes 'data' as the destination and 'data_char' as the source. Because bin2hex() converts each input byte into two hex characters, a 32-byte block read results in 64 bytes of output. Since 'data' is only 34 bytes (I2C_SMBUS_BLOCK_MAX + 2), this writes 30 bytes past the end of the buffer onto the stack. Additionally, the arguments were swapped: it was reading from the zero-initialized 'data_char' and writing to 'data', resulting in all-zero output regardless of the actual I2C read. Fix this by: 1. Expanding 'data_char' to 66 bytes to safely hold the hex output. 2. Correcting the bin2hex() argument order and using the actual read count. 3. Using a pointer to select the correct output buffer for the final simple_read_from_buffer call. | ||||
| CVE-2026-34654 | 1 Adobe | 4 Adobe Commerce, Commerce, Commerce B2b and 1 more | 2026-05-20 | 5.3 Medium |
| Adobe Commerce versions 2.4.9-beta1, 2.4.8-p4, 2.4.7-p9, 2.4.6-p14, 2.4.5-p16, 2.4.4-p17 and earlier are affected by a Dependency on Vulnerable Third-Party Component vulnerability that could result in an application denial-of-service. An attacker could exploit this vulnerability to crash the application, leading to a denial-of-service condition. Exploitation of this issue does not require user interaction. | ||||
| CVE-2026-31412 | 1 Linux | 1 Linux Kernel | 2026-05-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_mass_storage: Fix potential integer overflow in check_command_size_in_blocks() The `check_command_size_in_blocks()` function calculates the data size in bytes by left shifting `common->data_size_from_cmnd` by the block size (`common->curlun->blkbits`). However, it does not validate whether this shift operation will cause an integer overflow. Initially, the block size is set up in `fsg_lun_open()` , and the `common->data_size_from_cmnd` is set up in `do_scsi_command()`. During initialization, there is no integer overflow check for the interaction between two variables. So if a malicious USB host sends a SCSI READ or WRITE command requesting a large amount of data (`common->data_size_from_cmnd`), the left shift operation can wrap around. This results in a truncated data size, which can bypass boundary checks and potentially lead to memory corruption or out-of-bounds accesses. Fix this by using the check_shl_overflow() macro to safely perform the shift and catch any overflows. | ||||
| CVE-2026-31413 | 1 Linux | 1 Linux Kernel | 2026-05-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix unsound scalar forking in maybe_fork_scalars() for BPF_OR maybe_fork_scalars() is called for both BPF_AND and BPF_OR when the source operand is a constant. When dst has signed range [-1, 0], it forks the verifier state: the pushed path gets dst = 0, the current path gets dst = -1. For BPF_AND this is correct: 0 & K == 0. For BPF_OR this is wrong: 0 | K == K, not 0. The pushed path therefore tracks dst as 0 when the runtime value is K, producing an exploitable verifier/runtime divergence that allows out-of-bounds map access. Fix this by passing env->insn_idx (instead of env->insn_idx + 1) to push_stack(), so the pushed path re-executes the ALU instruction with dst = 0 and naturally computes the correct result for any opcode. | ||||
| CVE-2026-31415 | 1 Linux | 1 Linux Kernel | 2026-05-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: avoid overflows in ip6_datagram_send_ctl() Yiming Qian reported : <quote> I believe I found a locally triggerable kernel bug in the IPv6 sendmsg ancillary-data path that can panic the kernel via `skb_under_panic()` (local DoS). The core issue is a mismatch between: - a 16-bit length accumulator (`struct ipv6_txoptions::opt_flen`, type `__u16`) and - a pointer to the *last* provided destination-options header (`opt->dst1opt`) when multiple `IPV6_DSTOPTS` control messages (cmsgs) are provided. - `include/net/ipv6.h`: - `struct ipv6_txoptions::opt_flen` is `__u16` (wrap possible). (lines 291-307, especially 298) - `net/ipv6/datagram.c:ip6_datagram_send_ctl()`: - Accepts repeated `IPV6_DSTOPTS` and accumulates into `opt_flen` without rejecting duplicates. (lines 909-933) - `net/ipv6/ip6_output.c:__ip6_append_data()`: - Uses `opt->opt_flen + opt->opt_nflen` to compute header sizes/headroom decisions. (lines 1448-1466, especially 1463-1465) - `net/ipv6/ip6_output.c:__ip6_make_skb()`: - Calls `ipv6_push_frag_opts()` if `opt->opt_flen` is non-zero. (lines 1930-1934) - `net/ipv6/exthdrs.c:ipv6_push_frag_opts()` / `ipv6_push_exthdr()`: - Push size comes from `ipv6_optlen(opt->dst1opt)` (based on the pointed-to header). (lines 1179-1185 and 1206-1211) 1. `opt_flen` is a 16-bit accumulator: - `include/net/ipv6.h:298` defines `__u16 opt_flen; /* after fragment hdr */`. 2. `ip6_datagram_send_ctl()` accepts *repeated* `IPV6_DSTOPTS` cmsgs and increments `opt_flen` each time: - In `net/ipv6/datagram.c:909-933`, for `IPV6_DSTOPTS`: - It computes `len = ((hdr->hdrlen + 1) << 3);` - It checks `CAP_NET_RAW` using `ns_capable(net->user_ns, CAP_NET_RAW)`. (line 922) - Then it does: - `opt->opt_flen += len;` (line 927) - `opt->dst1opt = hdr;` (line 928) There is no duplicate rejection here (unlike the legacy `IPV6_2292DSTOPTS` path which rejects duplicates at `net/ipv6/datagram.c:901-904`). If enough large `IPV6_DSTOPTS` cmsgs are provided, `opt_flen` wraps while `dst1opt` still points to a large (2048-byte) destination-options header. In the attached PoC (`poc.c`): - 32 cmsgs with `hdrlen=255` => `len = (255+1)*8 = 2048` - 1 cmsg with `hdrlen=0` => `len = 8` - Total increment: `32*2048 + 8 = 65544`, so `(__u16)opt_flen == 8` - The last cmsg is 2048 bytes, so `dst1opt` points to a 2048-byte header. 3. The transmit path sizes headers using the wrapped `opt_flen`: - In `net/ipv6/ip6_output.c:1463-1465`: - `headersize = sizeof(struct ipv6hdr) + (opt ? opt->opt_flen + opt->opt_nflen : 0) + ...;` With wrapped `opt_flen`, `headersize`/headroom decisions underestimate what will be pushed later. 4. When building the final skb, the actual push length comes from `dst1opt` and is not limited by wrapped `opt_flen`: - In `net/ipv6/ip6_output.c:1930-1934`: - `if (opt->opt_flen) proto = ipv6_push_frag_opts(skb, opt, proto);` - In `net/ipv6/exthdrs.c:1206-1211`, `ipv6_push_frag_opts()` pushes `dst1opt` via `ipv6_push_exthdr()`. - In `net/ipv6/exthdrs.c:1179-1184`, `ipv6_push_exthdr()` does: - `skb_push(skb, ipv6_optlen(opt));` - `memcpy(h, opt, ipv6_optlen(opt));` With insufficient headroom, `skb_push()` underflows and triggers `skb_under_panic()` -> `BUG()`: - `net/core/skbuff.c:2669-2675` (`skb_push()` calls `skb_under_panic()`) - `net/core/skbuff.c:207-214` (`skb_panic()` ends in `BUG()`) - The `IPV6_DSTOPTS` cmsg path requires `CAP_NET_RAW` in the target netns user namespace (`ns_capable(net->user_ns, CAP_NET_RAW)`). - Root (or any task with `CAP_NET_RAW`) can trigger this without user namespaces. - An unprivileged `uid=1000` user can trigger this if unprivileged user namespaces are enabled and it can create a userns+netns to obtain namespaced `CAP_NET_RAW` (the attached PoC does this). - Local denial of service: kernel BUG/panic (system crash). - ---truncated--- | ||||
| CVE-2026-37530 | 2 Automotivelinux, Linuxfoundation | 2 Agl-service-can-low-level, Automotive Grade Linux | 2026-05-20 | 7.5 High |
| AGL agl-service-can-low-level thru 17.1.12 contains a stack buffer overflow in the uds-c library. The send_diagnostic_request function in uds.c allocates a 6-byte stack buffer (MAX_DIAGNOSTIC_PAYLOAD_SIZE=6) but copies up to 7 bytes (MAX_UDS_REQUEST_PAYLOAD_LENGTH=7) via memcpy at an offset of 1+pid_length (2-3 bytes), resulting in 1-4 bytes of controlled stack overflow. The payload_length field (uint8_t) has no bounds check against the destination buffer. On 32-bit ARM automotive ECUs without stack canaries, this can lead to return address overwrite and RCE. | ||||
| CVE-2026-37541 | 1 Openvehicles | 3 Open Vehicle Monitoring System, Open Vehicle Monitoring System 3, Open Vehicle Monitoring System Firmware | 2026-05-20 | 10 Critical |
| Buffer overflow vulnerability in Open Vehicle Monitoring System 3 (OVMS3) 3.3.005. In canformat_gvret.cpp, the length field in GVRET binary data is not properly validated, allowing remote attackers to cause a denial of service or possibly execute arbitrary code via crafted GVRET frames. | ||||
| CVE-2026-42468 | 1 Openvehicles | 3 Open Vehicle Monitoring System, Open Vehicle Monitoring System 3, Open Vehicle Monitoring System Firmware | 2026-05-20 | 8.8 High |
| Buffer overflow vulnerability in Open Vehicle Monitoring System 3 (OVMS3) 3.3.005. In canformat_pcap.cpp , the parser's phdr.len field is not properly validated, allowing remote attackers to cause a denial of service or possibly execute arbitrary code via crafted PCAP input. | ||||
| CVE-2026-42469 | 1 Openvehicles | 3 Open Vehicle Monitoring System, Open Vehicle Monitoring System 3, Open Vehicle Monitoring System Firmware | 2026-05-20 | 8.6 High |
| Buffer overflow vulnerability in Open Vehicle Monitoring System 3 (OVMS3) 3.3.005. In canformat_canswitch.cpp the parser does not properly validate a CANswitch DLC value, allowing remote attackers to cause a denial of service or possibly execute arbitrary code via crafted CANswitch frames. | ||||
| CVE-2026-23466 | 1 Linux | 1 Linux Kernel | 2026-05-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe: Open-code GGTT MMIO access protection GGTT MMIO access is currently protected by hotplug (drm_dev_enter), which works correctly when the driver loads successfully and is later unbound or unloaded. However, if driver load fails, this protection is insufficient because drm_dev_unplug() is never called. Additionally, devm release functions cannot guarantee that all BOs with GGTT mappings are destroyed before the GGTT MMIO region is removed, as some BOs may be freed asynchronously by worker threads. To address this, introduce an open-coded flag, protected by the GGTT lock, that guards GGTT MMIO access. The flag is cleared during the dev_fini_ggtt devm release function to ensure MMIO access is disabled once teardown begins. (cherry picked from commit 4f3a998a173b4325c2efd90bdadc6ccd3ad9a431) | ||||
| CVE-2026-31395 | 1 Linux | 1 Linux Kernel | 2026-05-20 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: bnxt_en: fix OOB access in DBG_BUF_PRODUCER async event handler The ASYNC_EVENT_CMPL_EVENT_ID_DBG_BUF_PRODUCER handler in bnxt_async_event_process() uses a firmware-supplied 'type' field directly as an index into bp->bs_trace[] without bounds validation. The 'type' field is a 16-bit value extracted from DMA-mapped completion ring memory that the NIC writes directly to host RAM. A malicious or compromised NIC can supply any value from 0 to 65535, causing an out-of-bounds access into kernel heap memory. The bnxt_bs_trace_check_wrap() call then dereferences bs_trace->magic_byte and writes to bs_trace->last_offset and bs_trace->wrapped, leading to kernel memory corruption or a crash. Fix by adding a bounds check and defining BNXT_TRACE_MAX as DBG_LOG_BUFFER_FLUSH_REQ_TYPE_ERR_QPC_TRACE + 1 to cover all currently defined firmware trace types (0x0 through 0xc). | ||||
| CVE-2026-44916 | 1 Openstack | 1 Ironic | 2026-05-20 | 3 Low |
| In OpenStack Ironic before 35.0.2 (in a certain non-default configuration), instance_info['ks_template'] is rendered without sandboxing. | ||||
| CVE-2026-45584 | 1 Microsoft | 1 Malware Protection Engine | 2026-05-20 | 8.1 High |
| Heap-based buffer overflow in Microsoft Defender allows an unauthorized attacker to execute code over a network. | ||||
| CVE-2026-8949 | 1 Mozilla | 2 Firefox, Thunderbird | 2026-05-20 | 7.5 High |
| Integer overflow in the Widget: Win32 component. This vulnerability was fixed in Firefox 151, Firefox ESR 140.11, Thunderbird 151, and Thunderbird 140.11. | ||||
| CVE-2025-15645 | 1 Ledger | 3 Flex, Nano X, Stax | 2026-05-20 | 4.6 Medium |
| Ledger Nano X, Flex, and Stax devices contain a denial of service vulnerability in the MCU firmware update process due to missing validation of the reset_handler parameter during firmware flashing. An attacker can provide a crafted reset_handler address pointing to invalid memory or attacker-controlled code to cause the device to enter an unrecoverable fault state during boot, resulting in permanent loss of operability. | ||||
| CVE-2026-32741 | 1 Struktur | 1 Libheif | 2026-05-20 | 7.1 High |
| libheif is a HEIF and AVIF file format decoder and encoder. Versions 1.21.2 and below contain a heap buffer overflow in MaskImageCodec::decode_mask_image(). When decoding a HEIF file containing a mask image (mski), the function copies the full iloc extent data into a pixel buffer using memcpy(dst, data.data(), data.size()). The copy length data.size() is determined by the iloc extent in the file (attacker-controlled), while the destination buffer is sized based on the declared image dimensions. Because no upper-bound check exists on the data length, a crafted file whose iloc extent exceeds the pixel buffer allocation overflows the heap. The vulnerable single-memcpy branch is reached when the mskC property specifies bits_per_pixel = 8 and the ispe property declares an even width ≥ 64 (so that stride == width), with no changes to default security limits or external codec plugins required. This issue has been fixed in version 1.22.0. | ||||
| CVE-2026-8956 | 1 Mozilla | 2 Firefox, Thunderbird | 2026-05-20 | 9.8 Critical |
| Integer overflow in the Networking: JAR component. This vulnerability was fixed in Firefox 151, Firefox ESR 140.11, Thunderbird 151, and Thunderbird 140.11. | ||||
| CVE-2026-8959 | 1 Mozilla | 2 Firefox, Thunderbird | 2026-05-20 | 9.6 Critical |
| Sandbox escape due to incorrect boundary conditions in the Widget: Win32 component. This vulnerability was fixed in Firefox 151, Firefox ESR 140.11, Thunderbird 151, and Thunderbird 140.11. | ||||