| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix bug_on in __es_tree_search caused by bad quota inode
We got a issue as fllows:
==================================================================
kernel BUG at fs/ext4/extents_status.c:202!
invalid opcode: 0000 [#1] PREEMPT SMP
CPU: 1 PID: 810 Comm: mount Not tainted 6.1.0-rc1-next-g9631525255e3 #352
RIP: 0010:__es_tree_search.isra.0+0xb8/0xe0
RSP: 0018:ffffc90001227900 EFLAGS: 00010202
RAX: 0000000000000000 RBX: 0000000077512a0f RCX: 0000000000000000
RDX: 0000000000000002 RSI: 0000000000002a10 RDI: ffff8881004cd0c8
RBP: ffff888177512ac8 R08: 47ffffffffffffff R09: 0000000000000001
R10: 0000000000000001 R11: 00000000000679af R12: 0000000000002a10
R13: ffff888177512d88 R14: 0000000077512a10 R15: 0000000000000000
FS: 00007f4bd76dbc40(0000)GS:ffff88842fd00000(0000)knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005653bf993cf8 CR3: 000000017bfdf000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
ext4_es_cache_extent+0xe2/0x210
ext4_cache_extents+0xd2/0x110
ext4_find_extent+0x5d5/0x8c0
ext4_ext_map_blocks+0x9c/0x1d30
ext4_map_blocks+0x431/0xa50
ext4_getblk+0x82/0x340
ext4_bread+0x14/0x110
ext4_quota_read+0xf0/0x180
v2_read_header+0x24/0x90
v2_check_quota_file+0x2f/0xa0
dquot_load_quota_sb+0x26c/0x760
dquot_load_quota_inode+0xa5/0x190
ext4_enable_quotas+0x14c/0x300
__ext4_fill_super+0x31cc/0x32c0
ext4_fill_super+0x115/0x2d0
get_tree_bdev+0x1d2/0x360
ext4_get_tree+0x19/0x30
vfs_get_tree+0x26/0xe0
path_mount+0x81d/0xfc0
do_mount+0x8d/0xc0
__x64_sys_mount+0xc0/0x160
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
</TASK>
==================================================================
Above issue may happen as follows:
-------------------------------------
ext4_fill_super
ext4_orphan_cleanup
ext4_enable_quotas
ext4_quota_enable
ext4_iget --> get error inode <5>
ext4_ext_check_inode --> Wrong imode makes it escape inspection
make_bad_inode(inode) --> EXT4_BOOT_LOADER_INO set imode
dquot_load_quota_inode
vfs_setup_quota_inode --> check pass
dquot_load_quota_sb
v2_check_quota_file
v2_read_header
ext4_quota_read
ext4_bread
ext4_getblk
ext4_map_blocks
ext4_ext_map_blocks
ext4_find_extent
ext4_cache_extents
ext4_es_cache_extent
__es_tree_search.isra.0
ext4_es_end --> Wrong extents trigger BUG_ON
In the above issue, s_usr_quota_inum is set to 5, but inode<5> contains
incorrect imode and disordered extents. Because 5 is EXT4_BOOT_LOADER_INO,
the ext4_ext_check_inode check in the ext4_iget function can be bypassed,
finally, the extents that are not checked trigger the BUG_ON in the
__es_tree_search function. To solve this issue, check whether the inode is
bad_inode in vfs_setup_quota_inode(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Add NULL pointer checks in dc_stream cursor attribute functions
The function dc_stream_set_cursor_attributes() currently dereferences
the `stream` pointer and nested members `stream->ctx->dc->current_state`
without checking for NULL.
All callers of these functions, such as in
`dcn30_apply_idle_power_optimizations()` and
`amdgpu_dm_plane_handle_cursor_update()`, already perform NULL checks
before calling these functions.
Fixes below:
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_stream.c:336 dc_stream_program_cursor_attributes()
error: we previously assumed 'stream' could be null (see line 334)
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_stream.c
327 bool dc_stream_program_cursor_attributes(
328 struct dc_stream_state *stream,
329 const struct dc_cursor_attributes *attributes)
330 {
331 struct dc *dc;
332 bool reset_idle_optimizations = false;
333
334 dc = stream ? stream->ctx->dc : NULL;
^^^^^^
The old code assumed stream could be NULL.
335
--> 336 if (dc_stream_set_cursor_attributes(stream, attributes)) {
^^^^^^
The refactor added an unchecked dereference.
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_stream.c
313 bool dc_stream_set_cursor_attributes(
314 struct dc_stream_state *stream,
315 const struct dc_cursor_attributes *attributes)
316 {
317 bool result = false;
318
319 if (dc_stream_check_cursor_attributes(stream, stream->ctx->dc->current_state, attributes)) {
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Here.
This function used to check for if stream as NULL and return false at
the start. Probably we should add that back. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: amd/sdw_utils: avoid NULL deref when devm_kasprintf() fails
devm_kasprintf() may return NULL on memory allocation failure,
but the debug message prints cpus->dai_name before checking it.
Move the dev_dbg() call after the NULL check to prevent potential
NULL pointer dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
ice: fix PTP cleanup on driver removal in error path
Improve the cleanup on releasing PTP resources in error path.
The error case might happen either at the driver probe and PTP
feature initialization or on PTP restart (errors in reset handling, NVM
update etc). In both cases, calls to PF PTP cleanup (ice_ptp_cleanup_pf
function) and 'ps_lock' mutex deinitialization were missed.
Additionally, ptp clock was not unregistered in the latter case.
Keep PTP state as 'uninitialized' on init to distinguish between error
scenarios and to avoid resource release duplication at driver removal.
The consequence of missing ice_ptp_cleanup_pf call is the following call
trace dumped when ice_adapter object is freed (port list is not empty,
as it is required at this stage):
[ T93022] ------------[ cut here ]------------
[ T93022] WARNING: CPU: 10 PID: 93022 at
ice/ice_adapter.c:67 ice_adapter_put+0xef/0x100 [ice]
...
[ T93022] RIP: 0010:ice_adapter_put+0xef/0x100 [ice]
...
[ T93022] Call Trace:
[ T93022] <TASK>
[ T93022] ? ice_adapter_put+0xef/0x100 [ice
33d2647ad4f6d866d41eefff1806df37c68aef0c]
[ T93022] ? __warn.cold+0xb0/0x10e
[ T93022] ? ice_adapter_put+0xef/0x100 [ice
33d2647ad4f6d866d41eefff1806df37c68aef0c]
[ T93022] ? report_bug+0xd8/0x150
[ T93022] ? handle_bug+0xe9/0x110
[ T93022] ? exc_invalid_op+0x17/0x70
[ T93022] ? asm_exc_invalid_op+0x1a/0x20
[ T93022] ? ice_adapter_put+0xef/0x100 [ice
33d2647ad4f6d866d41eefff1806df37c68aef0c]
[ T93022] pci_device_remove+0x42/0xb0
[ T93022] device_release_driver_internal+0x19f/0x200
[ T93022] driver_detach+0x48/0x90
[ T93022] bus_remove_driver+0x70/0xf0
[ T93022] pci_unregister_driver+0x42/0xb0
[ T93022] ice_module_exit+0x10/0xdb0 [ice
33d2647ad4f6d866d41eefff1806df37c68aef0c]
...
[ T93022] ---[ end trace 0000000000000000 ]---
[ T93022] ice: module unloaded |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix panic due to wrong pageattr of im->image
In the scenario where livepatch and kretfunc coexist, the pageattr of
im->image is rox after arch_prepare_bpf_trampoline in
bpf_trampoline_update, and then modify_fentry or register_fentry returns
-EAGAIN from bpf_tramp_ftrace_ops_func, the BPF_TRAMP_F_ORIG_STACK flag
will be configured, and arch_prepare_bpf_trampoline will be re-executed.
At this time, because the pageattr of im->image is rox,
arch_prepare_bpf_trampoline will read and write im->image, which causes
a fault. as follows:
insmod livepatch-sample.ko # samples/livepatch/livepatch-sample.c
bpftrace -e 'kretfunc:cmdline_proc_show {}'
BUG: unable to handle page fault for address: ffffffffa0206000
PGD 322d067 P4D 322d067 PUD 322e063 PMD 1297e067 PTE d428061
Oops: 0003 [#1] PREEMPT SMP PTI
CPU: 2 PID: 270 Comm: bpftrace Tainted: G E K 6.1.0 #5
RIP: 0010:arch_prepare_bpf_trampoline+0xed/0x8c0
RSP: 0018:ffffc90001083ad8 EFLAGS: 00010202
RAX: ffffffffa0206000 RBX: 0000000000000020 RCX: 0000000000000000
RDX: ffffffffa0206001 RSI: ffffffffa0206000 RDI: 0000000000000030
RBP: ffffc90001083b70 R08: 0000000000000066 R09: ffff88800f51b400
R10: 000000002e72c6e5 R11: 00000000d0a15080 R12: ffff8880110a68c8
R13: 0000000000000000 R14: ffff88800f51b400 R15: ffffffff814fec10
FS: 00007f87bc0dc780(0000) GS:ffff88803e600000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffa0206000 CR3: 0000000010b70000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
bpf_trampoline_update+0x25a/0x6b0
__bpf_trampoline_link_prog+0x101/0x240
bpf_trampoline_link_prog+0x2d/0x50
bpf_tracing_prog_attach+0x24c/0x530
bpf_raw_tp_link_attach+0x73/0x1d0
__sys_bpf+0x100e/0x2570
__x64_sys_bpf+0x1c/0x30
do_syscall_64+0x5b/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
With this patch, when modify_fentry or register_fentry returns -EAGAIN
from bpf_tramp_ftrace_ops_func, the pageattr of im->image will be reset
to nx+rw. |
| In the Linux kernel, the following vulnerability has been resolved:
net: openvswitch: reject negative ifindex
Recent changes in net-next (commit 759ab1edb56c ("net: store netdevs
in an xarray")) refactored the handling of pre-assigned ifindexes
and let syzbot surface a latent problem in ovs. ovs does not validate
ifindex, making it possible to create netdev ports with negative
ifindex values. It's easy to repro with YNL:
$ ./cli.py --spec netlink/specs/ovs_datapath.yaml \
--do new \
--json '{"upcall-pid": 1, "name":"my-dp"}'
$ ./cli.py --spec netlink/specs/ovs_vport.yaml \
--do new \
--json '{"upcall-pid": "00000001", "name": "some-port0", "dp-ifindex":3,"ifindex":4294901760,"type":2}'
$ ip link show
-65536: some-port0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 7a:48:21:ad:0b:fb brd ff:ff:ff:ff:ff:ff
...
Validate the inputs. Now the second command correctly returns:
$ ./cli.py --spec netlink/specs/ovs_vport.yaml \
--do new \
--json '{"upcall-pid": "00000001", "name": "some-port0", "dp-ifindex":3,"ifindex":4294901760,"type":2}'
lib.ynl.NlError: Netlink error: Numerical result out of range
nl_len = 108 (92) nl_flags = 0x300 nl_type = 2
error: -34 extack: {'msg': 'integer out of range', 'unknown': [[type:4 len:36] b'\x0c\x00\x02\x00\x00\x00\x00\x00\x00\x00\x00\x00\x0c\x00\x03\x00\xff\xff\xff\x7f\x00\x00\x00\x00\x08\x00\x01\x00\x08\x00\x00\x00'], 'bad-attr': '.ifindex'}
Accept 0 since it used to be silently ignored. |
| In the Linux kernel, the following vulnerability has been resolved:
netlink: annotate accesses to nlk->cb_running
Both netlink_recvmsg() and netlink_native_seq_show() read
nlk->cb_running locklessly. Use READ_ONCE() there.
Add corresponding WRITE_ONCE() to netlink_dump() and
__netlink_dump_start()
syzbot reported:
BUG: KCSAN: data-race in __netlink_dump_start / netlink_recvmsg
write to 0xffff88813ea4db59 of 1 bytes by task 28219 on cpu 0:
__netlink_dump_start+0x3af/0x4d0 net/netlink/af_netlink.c:2399
netlink_dump_start include/linux/netlink.h:308 [inline]
rtnetlink_rcv_msg+0x70f/0x8c0 net/core/rtnetlink.c:6130
netlink_rcv_skb+0x126/0x220 net/netlink/af_netlink.c:2577
rtnetlink_rcv+0x1c/0x20 net/core/rtnetlink.c:6192
netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline]
netlink_unicast+0x56f/0x640 net/netlink/af_netlink.c:1365
netlink_sendmsg+0x665/0x770 net/netlink/af_netlink.c:1942
sock_sendmsg_nosec net/socket.c:724 [inline]
sock_sendmsg net/socket.c:747 [inline]
sock_write_iter+0x1aa/0x230 net/socket.c:1138
call_write_iter include/linux/fs.h:1851 [inline]
new_sync_write fs/read_write.c:491 [inline]
vfs_write+0x463/0x760 fs/read_write.c:584
ksys_write+0xeb/0x1a0 fs/read_write.c:637
__do_sys_write fs/read_write.c:649 [inline]
__se_sys_write fs/read_write.c:646 [inline]
__x64_sys_write+0x42/0x50 fs/read_write.c:646
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
read to 0xffff88813ea4db59 of 1 bytes by task 28222 on cpu 1:
netlink_recvmsg+0x3b4/0x730 net/netlink/af_netlink.c:2022
sock_recvmsg_nosec+0x4c/0x80 net/socket.c:1017
____sys_recvmsg+0x2db/0x310 net/socket.c:2718
___sys_recvmsg net/socket.c:2762 [inline]
do_recvmmsg+0x2e5/0x710 net/socket.c:2856
__sys_recvmmsg net/socket.c:2935 [inline]
__do_sys_recvmmsg net/socket.c:2958 [inline]
__se_sys_recvmmsg net/socket.c:2951 [inline]
__x64_sys_recvmmsg+0xe2/0x160 net/socket.c:2951
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
value changed: 0x00 -> 0x01 |
| In the Linux kernel, the following vulnerability has been resolved:
futex: Don't leak robust_list pointer on exec race
sys_get_robust_list() and compat_get_robust_list() use ptrace_may_access()
to check if the calling task is allowed to access another task's
robust_list pointer. This check is racy against a concurrent exec() in the
target process.
During exec(), a task may transition from a non-privileged binary to a
privileged one (e.g., setuid binary) and its credentials/memory mappings
may change. If get_robust_list() performs ptrace_may_access() before
this transition, it may erroneously allow access to sensitive information
after the target becomes privileged.
A racy access allows an attacker to exploit a window during which
ptrace_may_access() passes before a target process transitions to a
privileged state via exec().
For example, consider a non-privileged task T that is about to execute a
setuid-root binary. An attacker task A calls get_robust_list(T) while T
is still unprivileged. Since ptrace_may_access() checks permissions
based on current credentials, it succeeds. However, if T begins exec
immediately afterwards, it becomes privileged and may change its memory
mappings. Because get_robust_list() proceeds to access T->robust_list
without synchronizing with exec() it may read user-space pointers from a
now-privileged process.
This violates the intended post-exec access restrictions and could
expose sensitive memory addresses or be used as a primitive in a larger
exploit chain. Consequently, the race can lead to unauthorized
disclosure of information across privilege boundaries and poses a
potential security risk.
Take a read lock on signal->exec_update_lock prior to invoking
ptrace_may_access() and accessing the robust_list/compat_robust_list.
This ensures that the target task's exec state remains stable during the
check, allowing for consistent and synchronized validation of
credentials. |
| In the Linux kernel, the following vulnerability has been resolved:
ipu3-imgu: Fix NULL pointer dereference in imgu_subdev_set_selection()
Calling v4l2_subdev_get_try_crop() and v4l2_subdev_get_try_compose()
with a subdev state of NULL leads to a NULL pointer dereference. This
can currently happen in imgu_subdev_set_selection() when the state
passed in is NULL, as this method first gets pointers to both the "try"
and "active" states and only then decides which to use.
The same issue has been addressed for imgu_subdev_get_selection() with
commit 30d03a0de650 ("ipu3-imgu: Fix NULL pointer dereference in active
selection access"). However the issue still persists in
imgu_subdev_set_selection().
Therefore, apply a similar fix as done in the aforementioned commit to
imgu_subdev_set_selection(). To keep things a bit cleaner, introduce
helper functions for "crop" and "compose" access and use them in both
imgu_subdev_set_selection() and imgu_subdev_get_selection(). |
| In the Linux kernel, the following vulnerability has been resolved:
net: stream: purge sk_error_queue in sk_stream_kill_queues()
Changheon Lee reported TCP socket leaks, with a nice repro.
It seems we leak TCP sockets with the following sequence:
1) SOF_TIMESTAMPING_TX_ACK is enabled on the socket.
Each ACK will cook an skb put in error queue, from __skb_tstamp_tx().
__skb_tstamp_tx() is using skb_clone(), unless
SOF_TIMESTAMPING_OPT_TSONLY was also requested.
2) If the application is also using MSG_ZEROCOPY, then we put in the
error queue cloned skbs that had a struct ubuf_info attached to them.
Whenever an struct ubuf_info is allocated, sock_zerocopy_alloc()
does a sock_hold().
As long as the cloned skbs are still in sk_error_queue,
socket refcount is kept elevated.
3) Application closes the socket, while error queue is not empty.
Since tcp_close() no longer purges the socket error queue,
we might end up with a TCP socket with at least one skb in
error queue keeping the socket alive forever.
This bug can be (ab)used to consume all kernel memory
and freeze the host.
We need to purge the error queue, with proper synchronization
against concurrent writers. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Fix type of second parameter in odn_edit_dpm_table() callback
With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG),
indirect call targets are validated against the expected function
pointer prototype to make sure the call target is valid to help mitigate
ROP attacks. If they are not identical, there is a failure at run time,
which manifests as either a kernel panic or thread getting killed. A
proposed warning in clang aims to catch these at compile time, which
reveals:
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/amdgpu_smu.c:3008:29: error: incompatible function pointer types initializing 'int (*)(void *, uint32_t, long *, uint32_t)' (aka 'int (*)(void *, unsigned int, long *, unsigned int)') with an expression of type 'int (void *, enum PP_OD_DPM_TABLE_COMMAND, long *, uint32_t)' (aka 'int (void *, enum PP_OD_DPM_TABLE_COMMAND, long *, unsigned int)') [-Werror,-Wincompatible-function-pointer-types-strict]
.odn_edit_dpm_table = smu_od_edit_dpm_table,
^~~~~~~~~~~~~~~~~~~~~
1 error generated.
There are only two implementations of ->odn_edit_dpm_table() in 'struct
amd_pm_funcs': smu_od_edit_dpm_table() and pp_odn_edit_dpm_table(). One
has a second parameter type of 'enum PP_OD_DPM_TABLE_COMMAND' and the
other uses 'u32'. Ultimately, smu_od_edit_dpm_table() calls
->od_edit_dpm_table() from 'struct pptable_funcs' and
pp_odn_edit_dpm_table() calls ->odn_edit_dpm_table() from 'struct
pp_hwmgr_func', which both have a second parameter type of 'enum
PP_OD_DPM_TABLE_COMMAND'.
Update the type parameter in both the prototype in 'struct amd_pm_funcs'
and pp_odn_edit_dpm_table() to 'enum PP_OD_DPM_TABLE_COMMAND', which
cleans up the warning. |
| In the Linux kernel, the following vulnerability has been resolved:
vdpa/vp_vdpa: fix kfree a wrong pointer in vp_vdpa_remove
In vp_vdpa_remove(), the code kfree(&vp_vdpa_mgtdev->mgtdev.id_table) uses
a reference of pointer as the argument of kfree, which is the wrong pointer
and then may hit crash like this:
Unable to handle kernel paging request at virtual address 00ffff003363e30c
Internal error: Oops: 96000004 [#1] SMP
Call trace:
rb_next+0x20/0x5c
ext4_readdir+0x494/0x5c4 [ext4]
iterate_dir+0x168/0x1b4
__se_sys_getdents64+0x68/0x170
__arm64_sys_getdents64+0x24/0x30
el0_svc_common.constprop.0+0x7c/0x1bc
do_el0_svc+0x2c/0x94
el0_svc+0x20/0x30
el0_sync_handler+0xb0/0xb4
el0_sync+0x160/0x180
Code: 54000220 f9400441 b4000161 aa0103e0 (f9400821)
SMP: stopping secondary CPUs
Starting crashdump kernel... |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Prevent decl_tag from being referenced in func_proto arg
Syzkaller managed to hit another decl_tag issue:
btf_func_proto_check kernel/bpf/btf.c:4506 [inline]
btf_check_all_types kernel/bpf/btf.c:4734 [inline]
btf_parse_type_sec+0x1175/0x1980 kernel/bpf/btf.c:4763
btf_parse kernel/bpf/btf.c:5042 [inline]
btf_new_fd+0x65a/0xb00 kernel/bpf/btf.c:6709
bpf_btf_load+0x6f/0x90 kernel/bpf/syscall.c:4342
__sys_bpf+0x50a/0x6c0 kernel/bpf/syscall.c:5034
__do_sys_bpf kernel/bpf/syscall.c:5093 [inline]
__se_sys_bpf kernel/bpf/syscall.c:5091 [inline]
__x64_sys_bpf+0x7c/0x90 kernel/bpf/syscall.c:5091
do_syscall_64+0x54/0x70 arch/x86/entry/common.c:48
This seems similar to commit ea68376c8bed ("bpf: prevent decl_tag from being
referenced in func_proto") but for the argument. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix issue in verifying allow_ptr_leaks
After we converted the capabilities of our networking-bpf program from
cap_sys_admin to cap_net_admin+cap_bpf, our networking-bpf program
failed to start. Because it failed the bpf verifier, and the error log
is "R3 pointer comparison prohibited".
A simple reproducer as follows,
SEC("cls-ingress")
int ingress(struct __sk_buff *skb)
{
struct iphdr *iph = (void *)(long)skb->data + sizeof(struct ethhdr);
if ((long)(iph + 1) > (long)skb->data_end)
return TC_ACT_STOLEN;
return TC_ACT_OK;
}
Per discussion with Yonghong and Alexei [1], comparison of two packet
pointers is not a pointer leak. This patch fixes it.
Our local kernel is 6.1.y and we expect this fix to be backported to
6.1.y, so stable is CCed.
[1]. https://lore.kernel.org/bpf/CAADnVQ+Nmspr7Si+pxWn8zkE7hX-7s93ugwC+94aXSy4uQ9vBg@mail.gmail.com/ |
| In the Linux kernel, the following vulnerability has been resolved:
USB: sisusbvga: Add endpoint checks
The syzbot fuzzer was able to provoke a WARNING from the sisusbvga driver:
------------[ cut here ]------------
usb 1-1: BOGUS urb xfer, pipe 3 != type 1
WARNING: CPU: 1 PID: 26 at drivers/usb/core/urb.c:504 usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504
Modules linked in:
CPU: 1 PID: 26 Comm: kworker/1:1 Not tainted 6.2.0-rc5-syzkaller-00199-g5af6ce704936 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/12/2023
Workqueue: usb_hub_wq hub_event
RIP: 0010:usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504
Code: 7c 24 18 e8 6c 50 80 fb 48 8b 7c 24 18 e8 62 1a 01 ff 41 89 d8 44 89 e1 4c 89 ea 48 89 c6 48 c7 c7 60 b1 fa 8a e8 84 b0 be 03 <0f> 0b e9 58 f8 ff ff e8 3e 50 80 fb 48 81 c5 c0 05 00 00 e9 84 f7
RSP: 0018:ffffc90000a1ed18 EFLAGS: 00010282
RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000000
RDX: ffff888012783a80 RSI: ffffffff816680ec RDI: fffff52000143d95
RBP: ffff888079020000 R08: 0000000000000005 R09: 0000000000000000
R10: 0000000080000000 R11: 0000000000000000 R12: 0000000000000003
R13: ffff888017d33370 R14: 0000000000000003 R15: ffff888021213600
FS: 0000000000000000(0000) GS:ffff8880b9900000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005592753a60b0 CR3: 0000000022899000 CR4: 00000000003506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
sisusb_bulkout_msg drivers/usb/misc/sisusbvga/sisusbvga.c:224 [inline]
sisusb_send_bulk_msg.constprop.0+0x904/0x1230 drivers/usb/misc/sisusbvga/sisusbvga.c:379
sisusb_send_bridge_packet drivers/usb/misc/sisusbvga/sisusbvga.c:567 [inline]
sisusb_do_init_gfxdevice drivers/usb/misc/sisusbvga/sisusbvga.c:2077 [inline]
sisusb_init_gfxdevice+0x87b/0x4000 drivers/usb/misc/sisusbvga/sisusbvga.c:2177
sisusb_probe+0x9cd/0xbe2 drivers/usb/misc/sisusbvga/sisusbvga.c:2869
...
The problem was caused by the fact that the driver does not check
whether the endpoints it uses are actually present and have the
appropriate types. This can be fixed by adding a simple check of
the endpoints. |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "drm/msm: Add missing check and destroy for alloc_ordered_workqueue"
This reverts commit 643b7d0869cc7f1f7a5ac7ca6bd25d88f54e31d0.
A recent patch that tried to fix up the msm_drm_init() paths with
respect to the workqueue but only ended up making things worse:
First, the newly added calls to msm_drm_uninit() on early errors would
trigger NULL-pointer dereferences, for example, as the kms pointer would
not have been initialised. (Note that these paths were also modified by
a second broken error handling patch which in effect cancelled out this
part when merged.)
Second, the newly added allocation sanity check would still leak the
previously allocated drm device.
Instead of trying to salvage what was badly broken (and clearly not
tested), let's revert the bad commit so that clean and backportable
fixes can be added in its place.
Patchwork: https://patchwork.freedesktop.org/patch/525107/ |
| In the Linux kernel, the following vulnerability has been resolved:
af_unix: Fix data races around sk->sk_shutdown.
KCSAN found a data race around sk->sk_shutdown where unix_release_sock()
and unix_shutdown() update it under unix_state_lock(), OTOH unix_poll()
and unix_dgram_poll() read it locklessly.
We need to annotate the writes and reads with WRITE_ONCE() and READ_ONCE().
BUG: KCSAN: data-race in unix_poll / unix_release_sock
write to 0xffff88800d0f8aec of 1 bytes by task 264 on cpu 0:
unix_release_sock+0x75c/0x910 net/unix/af_unix.c:631
unix_release+0x59/0x80 net/unix/af_unix.c:1042
__sock_release+0x7d/0x170 net/socket.c:653
sock_close+0x19/0x30 net/socket.c:1397
__fput+0x179/0x5e0 fs/file_table.c:321
____fput+0x15/0x20 fs/file_table.c:349
task_work_run+0x116/0x1a0 kernel/task_work.c:179
resume_user_mode_work include/linux/resume_user_mode.h:49 [inline]
exit_to_user_mode_loop kernel/entry/common.c:171 [inline]
exit_to_user_mode_prepare+0x174/0x180 kernel/entry/common.c:204
__syscall_exit_to_user_mode_work kernel/entry/common.c:286 [inline]
syscall_exit_to_user_mode+0x1a/0x30 kernel/entry/common.c:297
do_syscall_64+0x4b/0x90 arch/x86/entry/common.c:86
entry_SYSCALL_64_after_hwframe+0x72/0xdc
read to 0xffff88800d0f8aec of 1 bytes by task 222 on cpu 1:
unix_poll+0xa3/0x2a0 net/unix/af_unix.c:3170
sock_poll+0xcf/0x2b0 net/socket.c:1385
vfs_poll include/linux/poll.h:88 [inline]
ep_item_poll.isra.0+0x78/0xc0 fs/eventpoll.c:855
ep_send_events fs/eventpoll.c:1694 [inline]
ep_poll fs/eventpoll.c:1823 [inline]
do_epoll_wait+0x6c4/0xea0 fs/eventpoll.c:2258
__do_sys_epoll_wait fs/eventpoll.c:2270 [inline]
__se_sys_epoll_wait fs/eventpoll.c:2265 [inline]
__x64_sys_epoll_wait+0xcc/0x190 fs/eventpoll.c:2265
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x72/0xdc
value changed: 0x00 -> 0x03
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 222 Comm: dbus-broker Not tainted 6.3.0-rc7-02330-gca6270c12e20 #2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: fix registration of 6Ghz-only phy without the full channel range
Because of what seems to be a typo, a 6Ghz-only phy for which the BDF
does not allow the 7115Mhz channel will fail to register:
WARNING: CPU: 2 PID: 106 at net/wireless/core.c:907 wiphy_register+0x914/0x954
Modules linked in: ath11k_pci sbsa_gwdt
CPU: 2 PID: 106 Comm: kworker/u8:5 Not tainted 6.3.0-rc7-next-20230418-00549-g1e096a17625a-dirty #9
Hardware name: Freebox V7R Board (DT)
Workqueue: ath11k_qmi_driver_event ath11k_qmi_driver_event_work
pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : wiphy_register+0x914/0x954
lr : ieee80211_register_hw+0x67c/0xc10
sp : ffffff800b123aa0
x29: ffffff800b123aa0 x28: 0000000000000000 x27: 0000000000000000
x26: 0000000000000000 x25: 0000000000000006 x24: ffffffc008d51418
x23: ffffffc008cb0838 x22: ffffff80176c2460 x21: 0000000000000168
x20: ffffff80176c0000 x19: ffffff80176c03e0 x18: 0000000000000014
x17: 00000000cbef338c x16: 00000000d2a26f21 x15: 00000000ad6bb85f
x14: 0000000000000020 x13: 0000000000000020 x12: 00000000ffffffbd
x11: 0000000000000208 x10: 00000000fffffdf7 x9 : ffffffc009394718
x8 : ffffff80176c0528 x7 : 000000007fffffff x6 : 0000000000000006
x5 : 0000000000000005 x4 : ffffff800b304284 x3 : ffffff800b304284
x2 : ffffff800b304d98 x1 : 0000000000000000 x0 : 0000000000000000
Call trace:
wiphy_register+0x914/0x954
ieee80211_register_hw+0x67c/0xc10
ath11k_mac_register+0x7c4/0xe10
ath11k_core_qmi_firmware_ready+0x1f4/0x570
ath11k_qmi_driver_event_work+0x198/0x590
process_one_work+0x1b8/0x328
worker_thread+0x6c/0x414
kthread+0x100/0x104
ret_from_fork+0x10/0x20
---[ end trace 0000000000000000 ]---
ath11k_pci 0002:01:00.0: ieee80211 registration failed: -22
ath11k_pci 0002:01:00.0: failed register the radio with mac80211: -22
ath11k_pci 0002:01:00.0: failed to create pdev core: -22 |
| In the Linux kernel, the following vulnerability has been resolved:
m68k: Only force 030 bus error if PC not in exception table
__get_kernel_nofault() does copy data in supervisor mode when
forcing a task backtrace log through /proc/sysrq_trigger.
This is expected cause a bus error exception on e.g. NULL
pointer dereferencing when logging a kernel task has no
workqueue associated. This bus error ought to be ignored.
Our 030 bus error handler is ill equipped to deal with this:
Whenever ssw indicates a kernel mode access on a data fault,
we don't even attempt to handle the fault and instead always
send a SEGV signal (or panic). As a result, the check
for exception handling at the fault PC (buried in
send_sig_fault() which gets called from do_page_fault()
eventually) is never used.
In contrast, both 040 and 060 access error handlers do not
care whether a fault happened on supervisor mode access,
and will call do_page_fault() on those, ultimately honoring
the exception table.
Add a check in bus_error030 to call do_page_fault() in case
we do have an entry for the fault PC in our exception table.
I had attempted a fix for this earlier in 2019 that did rely
on testing pagefault_disabled() (see link below) to achieve
the same thing, but this patch should be more generic.
Tested on 030 Atari Falcon. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Silence a warning in btf_type_id_size()
syzbot reported a warning in [1] with the following stacktrace:
WARNING: CPU: 0 PID: 5005 at kernel/bpf/btf.c:1988 btf_type_id_size+0x2d9/0x9d0 kernel/bpf/btf.c:1988
...
RIP: 0010:btf_type_id_size+0x2d9/0x9d0 kernel/bpf/btf.c:1988
...
Call Trace:
<TASK>
map_check_btf kernel/bpf/syscall.c:1024 [inline]
map_create+0x1157/0x1860 kernel/bpf/syscall.c:1198
__sys_bpf+0x127f/0x5420 kernel/bpf/syscall.c:5040
__do_sys_bpf kernel/bpf/syscall.c:5162 [inline]
__se_sys_bpf kernel/bpf/syscall.c:5160 [inline]
__x64_sys_bpf+0x79/0xc0 kernel/bpf/syscall.c:5160
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
With the following btf
[1] DECL_TAG 'a' type_id=4 component_idx=-1
[2] PTR '(anon)' type_id=0
[3] TYPE_TAG 'a' type_id=2
[4] VAR 'a' type_id=3, linkage=static
and when the bpf_attr.btf_key_type_id = 1 (DECL_TAG),
the following WARN_ON_ONCE in btf_type_id_size() is triggered:
if (WARN_ON_ONCE(!btf_type_is_modifier(size_type) &&
!btf_type_is_var(size_type)))
return NULL;
Note that 'return NULL' is the correct behavior as we don't want
a DECL_TAG type to be used as a btf_{key,value}_type_id even
for the case like 'DECL_TAG -> STRUCT'. So there
is no correctness issue here, we just want to silence warning.
To silence the warning, I added DECL_TAG as one of kinds in
btf_type_nosize() which will cause btf_type_id_size() returning
NULL earlier without the warning.
[1] https://lore.kernel.org/bpf/000000000000e0df8d05fc75ba86@google.com/ |
