| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
serial: qcom-geni: Fix blocked task
Revert commit 1afa70632c39 ("serial: qcom-geni: Enable PM runtime for
serial driver") and its dependent commit 86fa39dd6fb7 ("serial:
qcom-geni: Enable Serial on SA8255p Qualcomm platforms") because the
first one causes regression - hang task on Qualcomm RB1 board (QRB2210)
and unable to use serial at all during normal boot:
INFO: task kworker/u16:0:12 blocked for more than 42 seconds.
Not tainted 6.17.0-rc1-00004-g53e760d89498 #9
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/u16:0 state:D stack:0 pid:12 tgid:12 ppid:2 task_flags:0x4208060 flags:0x00000010
Workqueue: async async_run_entry_fn
Call trace:
__switch_to+0xe8/0x1a0 (T)
__schedule+0x290/0x7c0
schedule+0x34/0x118
rpm_resume+0x14c/0x66c
rpm_resume+0x2a4/0x66c
rpm_resume+0x2a4/0x66c
rpm_resume+0x2a4/0x66c
__pm_runtime_resume+0x50/0x9c
__driver_probe_device+0x58/0x120
driver_probe_device+0x3c/0x154
__driver_attach_async_helper+0x4c/0xc0
async_run_entry_fn+0x34/0xe0
process_one_work+0x148/0x290
worker_thread+0x2c4/0x3e0
kthread+0x118/0x1c0
ret_from_fork+0x10/0x20
The issue was reported on 12th of August and was ignored by author of
commits introducing issue for two weeks. Only after complaining author
produced a fix which did not work, so if original commits cannot be
reliably fixed for 5 weeks, they obviously are buggy and need to be
dropped. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix BUG in ext4_mb_new_inode_pa() due to overflow
When we calculate the end position of ext4_free_extent, this position may
be exactly where ext4_lblk_t (i.e. uint) overflows. For example, if
ac_g_ex.fe_logical is 4294965248 and ac_orig_goal_len is 2048, then the
computed end is 0x100000000, which is 0. If ac->ac_o_ex.fe_logical is not
the first case of adjusting the best extent, that is, new_bex_end > 0, the
following BUG_ON will be triggered:
=========================================================
kernel BUG at fs/ext4/mballoc.c:5116!
invalid opcode: 0000 [#1] PREEMPT SMP PTI
CPU: 3 PID: 673 Comm: xfs_io Tainted: G E 6.5.0-rc1+ #279
RIP: 0010:ext4_mb_new_inode_pa+0xc5/0x430
Call Trace:
<TASK>
ext4_mb_use_best_found+0x203/0x2f0
ext4_mb_try_best_found+0x163/0x240
ext4_mb_regular_allocator+0x158/0x1550
ext4_mb_new_blocks+0x86a/0xe10
ext4_ext_map_blocks+0xb0c/0x13a0
ext4_map_blocks+0x2cd/0x8f0
ext4_iomap_begin+0x27b/0x400
iomap_iter+0x222/0x3d0
__iomap_dio_rw+0x243/0xcb0
iomap_dio_rw+0x16/0x80
=========================================================
A simple reproducer demonstrating the problem:
mkfs.ext4 -F /dev/sda -b 4096 100M
mount /dev/sda /tmp/test
fallocate -l1M /tmp/test/tmp
fallocate -l10M /tmp/test/file
fallocate -i -o 1M -l16777203M /tmp/test/file
fsstress -d /tmp/test -l 0 -n 100000 -p 8 &
sleep 10 && killall -9 fsstress
rm -f /tmp/test/tmp
xfs_io -c "open -ad /tmp/test/file" -c "pwrite -S 0xff 0 8192"
We simply refactor the logic for adjusting the best extent by adding
a temporary ext4_free_extent ex and use extent_logical_end() to avoid
overflow, which also simplifies the code. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: zoned: skip splitting and logical rewriting on pre-alloc write
When doing a relocation, there is a chance that at the time of
btrfs_reloc_clone_csums(), there is no checksum for the corresponding
region.
In this case, btrfs_finish_ordered_zoned()'s sum points to an invalid item
and so ordered_extent's logical is set to some invalid value. Then,
btrfs_lookup_block_group() in btrfs_zone_finish_endio() failed to find a
block group and will hit an assert or a null pointer dereference as
following.
This can be reprodcued by running btrfs/028 several times (e.g, 4 to 16
times) with a null_blk setup. The device's zone size and capacity is set to
32 MB and the storage size is set to 5 GB on my setup.
KASAN: null-ptr-deref in range [0x0000000000000088-0x000000000000008f]
CPU: 6 PID: 3105720 Comm: kworker/u16:13 Tainted: G W 6.5.0-rc6-kts+ #1
Hardware name: Supermicro Super Server/X10SRL-F, BIOS 2.0 12/17/2015
Workqueue: btrfs-endio-write btrfs_work_helper [btrfs]
RIP: 0010:btrfs_zone_finish_endio.part.0+0x34/0x160 [btrfs]
Code: 41 54 49 89 fc 55 48 89 f5 53 e8 57 7d fc ff 48 8d b8 88 00 00 00 48 89 c3 48 b8 00 00 00 00 00
> 3c 02 00 0f 85 02 01 00 00 f6 83 88 00 00 00 01 0f 84 a8 00 00
RSP: 0018:ffff88833cf87b08 EFLAGS: 00010206
RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000011 RSI: 0000000000000004 RDI: 0000000000000088
RBP: 0000000000000002 R08: 0000000000000001 R09: ffffed102877b827
R10: ffff888143bdc13b R11: ffff888125b1cbc0 R12: ffff888143bdc000
R13: 0000000000007000 R14: ffff888125b1cba8 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff88881e500000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f3ed85223d5 CR3: 00000001519b4005 CR4: 00000000001706e0
Call Trace:
<TASK>
? die_addr+0x3c/0xa0
? exc_general_protection+0x148/0x220
? asm_exc_general_protection+0x22/0x30
? btrfs_zone_finish_endio.part.0+0x34/0x160 [btrfs]
? btrfs_zone_finish_endio.part.0+0x19/0x160 [btrfs]
btrfs_finish_one_ordered+0x7b8/0x1de0 [btrfs]
? rcu_is_watching+0x11/0xb0
? lock_release+0x47a/0x620
? btrfs_finish_ordered_zoned+0x59b/0x800 [btrfs]
? __pfx_btrfs_finish_one_ordered+0x10/0x10 [btrfs]
? btrfs_finish_ordered_zoned+0x358/0x800 [btrfs]
? __smp_call_single_queue+0x124/0x350
? rcu_is_watching+0x11/0xb0
btrfs_work_helper+0x19f/0xc60 [btrfs]
? __pfx_try_to_wake_up+0x10/0x10
? _raw_spin_unlock_irq+0x24/0x50
? rcu_is_watching+0x11/0xb0
process_one_work+0x8c1/0x1430
? __pfx_lock_acquire+0x10/0x10
? __pfx_process_one_work+0x10/0x10
? __pfx_do_raw_spin_lock+0x10/0x10
? _raw_spin_lock_irq+0x52/0x60
worker_thread+0x100/0x12c0
? __kthread_parkme+0xc1/0x1f0
? __pfx_worker_thread+0x10/0x10
kthread+0x2ea/0x3c0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x30/0x70
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1b/0x30
</TASK>
On the zoned mode, writing to pre-allocated region means data relocation
write. Such write always uses WRITE command so there is no need of splitting
and rewriting logical address. Thus, we can just skip the function for the
case. |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid10: fix null-ptr-deref in raid10_sync_request
init_resync() inits mempool and sets conf->have_replacemnt at the beginning
of sync, close_sync() frees the mempool when sync is completed.
After [1] recovery might be skipped and init_resync() is called but
close_sync() is not. null-ptr-deref occurs with r10bio->dev[i].repl_bio.
The following is one way to reproduce the issue.
1) create a array, wait for resync to complete, mddev->recovery_cp is set
to MaxSector.
2) recovery is woken and it is skipped. conf->have_replacement is set to
0 in init_resync(). close_sync() not called.
3) some io errors and rdev A is set to WantReplacement.
4) a new device is added and set to A's replacement.
5) recovery is woken, A have replacement, but conf->have_replacemnt is
0. r10bio->dev[i].repl_bio will not be alloced and null-ptr-deref
occurs.
Fix it by not calling init_resync() if recovery skipped.
[1] commit 7e83ccbecd60 ("md/raid10: Allow skipping recovery when clean arrays are assembled") |
| In the Linux kernel, the following vulnerability has been resolved:
posix-timers: Prevent RT livelock in itimer_delete()
itimer_delete() has a retry loop when the timer is concurrently expired. On
non-RT kernels this just spin-waits until the timer callback has completed,
except for posix CPU timers which have HAVE_POSIX_CPU_TIMERS_TASK_WORK
enabled.
In that case and on RT kernels the existing task could live lock when
preempting the task which does the timer delivery.
Replace spin_unlock() with an invocation of timer_wait_running() to handle
it the same way as the other retry loops in the posix timer code. |
| In the Linux kernel, the following vulnerability has been resolved:
blk-mq: fix potential deadlock while nr_requests grown
Allocate and free sched_tags while queue is freezed can deadlock[1],
this is a long term problem, hence allocate memory before freezing
queue and free memory after queue is unfreezed.
[1] https://lore.kernel.org/all/0659ea8d-a463-47c8-9180-43c719e106eb@linux.ibm.com/ |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: dont report verifier bug for missing bpf_scc_visit on speculative path
Syzbot generated a program that triggers a verifier_bug() call in
maybe_exit_scc(). maybe_exit_scc() assumes that, when called for a
state with insn_idx in some SCC, there should be an instance of struct
bpf_scc_visit allocated for that SCC. Turns out the assumption does
not hold for speculative execution paths. See example in the next
patch.
maybe_scc_exit() is called from update_branch_counts() for states that
reach branch count of zero, meaning that path exploration for a
particular path is finished. Path exploration can finish in one of
three ways:
a. Verification error is found. In this case, update_branch_counts()
is called only for non-speculative paths.
b. Top level BPF_EXIT is reached. Such instructions are never a part of
an SCC, so compute_scc_callchain() in maybe_scc_exit() will return
false, and maybe_scc_exit() will return early.
c. A checkpoint is reached and matched. Checkpoints are created by
is_state_visited(), which calls maybe_enter_scc(), which allocates
bpf_scc_visit instances for checkpoints within SCCs.
Hence, for non-speculative symbolic execution paths, the assumption
still holds: if maybe_scc_exit() is called for a state within an SCC,
bpf_scc_visit instance must exist.
This patch removes the verifier_bug() call for speculative paths. |
| In the Linux kernel, the following vulnerability has been resolved:
ixgbe: fix too early devlink_free() in ixgbe_remove()
Since ixgbe_adapter is embedded in devlink, calling devlink_free()
prematurely in the ixgbe_remove() path can lead to UAF. Move devlink_free()
to the end.
KASAN report:
BUG: KASAN: use-after-free in ixgbe_reset_interrupt_capability+0x140/0x180 [ixgbe]
Read of size 8 at addr ffff0000adf813e0 by task bash/2095
CPU: 1 UID: 0 PID: 2095 Comm: bash Tainted: G S 6.17.0-rc2-tnguy.net-queue+ #1 PREEMPT(full)
[...]
Call trace:
show_stack+0x30/0x90 (C)
dump_stack_lvl+0x9c/0xd0
print_address_description.constprop.0+0x90/0x310
print_report+0x104/0x1f0
kasan_report+0x88/0x180
__asan_report_load8_noabort+0x20/0x30
ixgbe_reset_interrupt_capability+0x140/0x180 [ixgbe]
ixgbe_clear_interrupt_scheme+0xf8/0x130 [ixgbe]
ixgbe_remove+0x2d0/0x8c0 [ixgbe]
pci_device_remove+0xa0/0x220
device_remove+0xb8/0x170
device_release_driver_internal+0x318/0x490
device_driver_detach+0x40/0x68
unbind_store+0xec/0x118
drv_attr_store+0x64/0xb8
sysfs_kf_write+0xcc/0x138
kernfs_fop_write_iter+0x294/0x440
new_sync_write+0x1fc/0x588
vfs_write+0x480/0x6a0
ksys_write+0xf0/0x1e0
__arm64_sys_write+0x70/0xc0
invoke_syscall.constprop.0+0xcc/0x280
el0_svc_common.constprop.0+0xa8/0x248
do_el0_svc+0x44/0x68
el0_svc+0x54/0x160
el0t_64_sync_handler+0xa0/0xe8
el0t_64_sync+0x1b0/0x1b8 |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: do not assert we found block group item when creating free space tree
Currently, when building a free space tree at populate_free_space_tree(),
if we are not using the block group tree feature, we always expect to find
block group items (either extent items or a block group item with key type
BTRFS_BLOCK_GROUP_ITEM_KEY) when we search the extent tree with
btrfs_search_slot_for_read(), so we assert that we found an item. However
this expectation is wrong since we can have a new block group created in
the current transaction which is still empty and for which we still have
not added the block group's item to the extent tree, in which case we do
not have any items in the extent tree associated to the block group.
The insertion of a new block group's block group item in the extent tree
happens at btrfs_create_pending_block_groups() when it calls the helper
insert_block_group_item(). This typically is done when a transaction
handle is released, committed or when running delayed refs (either as
part of a transaction commit or when serving tickets for space reservation
if we are low on free space).
So remove the assertion at populate_free_space_tree() even when the block
group tree feature is not enabled and update the comment to mention this
case.
Syzbot reported this with the following stack trace:
BTRFS info (device loop3 state M): rebuilding free space tree
assertion failed: ret == 0 :: 0, in fs/btrfs/free-space-tree.c:1115
------------[ cut here ]------------
kernel BUG at fs/btrfs/free-space-tree.c:1115!
Oops: invalid opcode: 0000 [#1] SMP KASAN PTI
CPU: 1 UID: 0 PID: 6352 Comm: syz.3.25 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/18/2025
RIP: 0010:populate_free_space_tree+0x700/0x710 fs/btrfs/free-space-tree.c:1115
Code: ff ff e8 d3 (...)
RSP: 0018:ffffc9000430f780 EFLAGS: 00010246
RAX: 0000000000000043 RBX: ffff88805b709630 RCX: fea61d0e2e79d000
RDX: 0000000000000000 RSI: 0000000080000000 RDI: 0000000000000000
RBP: ffffc9000430f8b0 R08: ffffc9000430f4a7 R09: 1ffff92000861e94
R10: dffffc0000000000 R11: fffff52000861e95 R12: 0000000000000001
R13: 1ffff92000861f00 R14: dffffc0000000000 R15: 0000000000000000
FS: 00007f424d9fe6c0(0000) GS:ffff888125afc000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fd78ad212c0 CR3: 0000000076d68000 CR4: 00000000003526f0
Call Trace:
<TASK>
btrfs_rebuild_free_space_tree+0x1ba/0x6d0 fs/btrfs/free-space-tree.c:1364
btrfs_start_pre_rw_mount+0x128f/0x1bf0 fs/btrfs/disk-io.c:3062
btrfs_remount_rw fs/btrfs/super.c:1334 [inline]
btrfs_reconfigure+0xaed/0x2160 fs/btrfs/super.c:1559
reconfigure_super+0x227/0x890 fs/super.c:1076
do_remount fs/namespace.c:3279 [inline]
path_mount+0xd1a/0xfe0 fs/namespace.c:4027
do_mount fs/namespace.c:4048 [inline]
__do_sys_mount fs/namespace.c:4236 [inline]
__se_sys_mount+0x313/0x410 fs/namespace.c:4213
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0xfa0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f424e39066a
Code: d8 64 89 02 (...)
RSP: 002b:00007f424d9fde68 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5
RAX: ffffffffffffffda RBX: 00007f424d9fdef0 RCX: 00007f424e39066a
RDX: 0000200000000180 RSI: 0000200000000380 RDI: 0000000000000000
RBP: 0000200000000180 R08: 00007f424d9fdef0 R09: 0000000000000020
R10: 0000000000000020 R11: 0000000000000246 R12: 0000200000000380
R13: 00007f424d9fdeb0 R14: 0000000000000000 R15: 00002000000002c0
</TASK>
Modules linked in:
---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Fix NULL pointer dereference in VRAM logic for APU devices
Previously, APU platforms (and other scenarios with uninitialized VRAM managers)
triggered a NULL pointer dereference in `ttm_resource_manager_usage()`. The root
cause is not that the `struct ttm_resource_manager *man` pointer itself is NULL,
but that `man->bdev` (the backing device pointer within the manager) remains
uninitialized (NULL) on APUs—since APUs lack dedicated VRAM and do not fully
set up VRAM manager structures. When `ttm_resource_manager_usage()` attempts to
acquire `man->bdev->lru_lock`, it dereferences the NULL `man->bdev`, leading to
a kernel OOPS.
1. **amdgpu_cs.c**: Extend the existing bandwidth control check in
`amdgpu_cs_get_threshold_for_moves()` to include a check for
`ttm_resource_manager_used()`. If the manager is not used (uninitialized
`bdev`), return 0 for migration thresholds immediately—skipping VRAM-specific
logic that would trigger the NULL dereference.
2. **amdgpu_kms.c**: Update the `AMDGPU_INFO_VRAM_USAGE` ioctl and memory info
reporting to use a conditional: if the manager is used, return the real VRAM
usage; otherwise, return 0. This avoids accessing `man->bdev` when it is
NULL.
3. **amdgpu_virt.c**: Modify the vf2pf (virtual function to physical function)
data write path. Use `ttm_resource_manager_used()` to check validity: if the
manager is usable, calculate `fb_usage` from VRAM usage; otherwise, set
`fb_usage` to 0 (APUs have no discrete framebuffer to report).
This approach is more robust than APU-specific checks because it:
- Works for all scenarios where the VRAM manager is uninitialized (not just APUs),
- Aligns with TTM's design by using its native helper function,
- Preserves correct behavior for discrete GPUs (which have fully initialized
`man->bdev` and pass the `ttm_resource_manager_used()` check).
v4: use ttm_resource_manager_used(&adev->mman.vram_mgr.manager) instead of checking the adev->gmc.is_app_apu flag (Christian) |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: ina2xx: avoid NULL pointer dereference on OF device match
The affected lines were resulting in a NULL pointer dereference on our
platform because the device tree contained the following list of
compatible strings:
power-sensor@40 {
compatible = "ti,ina232", "ti,ina231";
...
};
Since the driver doesn't declare a compatible string "ti,ina232", the OF
matching succeeds on "ti,ina231". But the I2C device ID info is
populated via the first compatible string, cf. modalias population in
of_i2c_get_board_info(). Since there is no "ina232" entry in the legacy
I2C device ID table either, the struct i2c_device_id *id pointer in the
probe function is NULL.
Fix this by using the already populated type variable instead, which
points to the proper driver data. Since the name is also wanted, add a
generic one to the ina2xx_config table. |
| In the Linux kernel, the following vulnerability has been resolved:
net: do not allow gso_size to be set to GSO_BY_FRAGS
One missing check in virtio_net_hdr_to_skb() allowed
syzbot to crash kernels again [1]
Do not allow gso_size to be set to GSO_BY_FRAGS (0xffff),
because this magic value is used by the kernel.
[1]
general protection fault, probably for non-canonical address 0xdffffc000000000e: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000070-0x0000000000000077]
CPU: 0 PID: 5039 Comm: syz-executor401 Not tainted 6.5.0-rc5-next-20230809-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023
RIP: 0010:skb_segment+0x1a52/0x3ef0 net/core/skbuff.c:4500
Code: 00 00 00 e9 ab eb ff ff e8 6b 96 5d f9 48 8b 84 24 00 01 00 00 48 8d 78 70 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 03 0f 8e ea 21 00 00 48 8b 84 24 00 01
RSP: 0018:ffffc90003d3f1c8 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: 000000000001fffe RCX: 0000000000000000
RDX: 000000000000000e RSI: ffffffff882a3115 RDI: 0000000000000070
RBP: ffffc90003d3f378 R08: 0000000000000005 R09: 000000000000ffff
R10: 000000000000ffff R11: 5ee4a93e456187d6 R12: 000000000001ffc6
R13: dffffc0000000000 R14: 0000000000000008 R15: 000000000000ffff
FS: 00005555563f2380(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020020000 CR3: 000000001626d000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
udp6_ufo_fragment+0x9d2/0xd50 net/ipv6/udp_offload.c:109
ipv6_gso_segment+0x5c4/0x17b0 net/ipv6/ip6_offload.c:120
skb_mac_gso_segment+0x292/0x610 net/core/gso.c:53
__skb_gso_segment+0x339/0x710 net/core/gso.c:124
skb_gso_segment include/net/gso.h:83 [inline]
validate_xmit_skb+0x3a5/0xf10 net/core/dev.c:3625
__dev_queue_xmit+0x8f0/0x3d60 net/core/dev.c:4329
dev_queue_xmit include/linux/netdevice.h:3082 [inline]
packet_xmit+0x257/0x380 net/packet/af_packet.c:276
packet_snd net/packet/af_packet.c:3087 [inline]
packet_sendmsg+0x24c7/0x5570 net/packet/af_packet.c:3119
sock_sendmsg_nosec net/socket.c:727 [inline]
sock_sendmsg+0xd9/0x180 net/socket.c:750
____sys_sendmsg+0x6ac/0x940 net/socket.c:2496
___sys_sendmsg+0x135/0x1d0 net/socket.c:2550
__sys_sendmsg+0x117/0x1e0 net/socket.c:2579
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7ff27cdb34d9 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vmwgfx: Fix a null-ptr access in the cursor snooper
Check that the resource which is converted to a surface exists before
trying to use the cursor snooper on it.
vmw_cmd_res_check allows explicit invalid (SVGA3D_INVALID_ID) identifiers
because some svga commands accept SVGA3D_INVALID_ID to mean "no surface",
unfortunately functions that accept the actual surfaces as objects might
(and in case of the cursor snooper, do not) be able to handle null
objects. Make sure that we validate not only the identifier (via the
vmw_cmd_res_check) but also check that the actual resource exists before
trying to do something with it.
Fixes unchecked null-ptr reference in the snooping code. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: Intel: sof_sdw: Prevent jump to NULL add_sidecar callback
In create_sdw_dailink() check that sof_end->codec_info->add_sidecar
is not NULL before calling it.
The original code assumed that if include_sidecar is true, the codec
on that link has an add_sidecar callback. But there could be other
codecs on the same link that do not have an add_sidecar callback. |
| In the Linux kernel, the following vulnerability has been resolved:
PM / devfreq: hisi: Fix potential UAF in OPP handling
Ensure all required data is acquired before calling dev_pm_opp_put(opp)
to maintain correct resource acquisition and release order. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm/dpu: Add check for cstate
As kzalloc may fail and return NULL pointer,
it should be better to check cstate
in order to avoid the NULL pointer dereference
in __drm_atomic_helper_crtc_reset.
Patchwork: https://patchwork.freedesktop.org/patch/514163/ |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: safexcel - Cleanup ring IRQ workqueues on load failure
A failure loading the safexcel driver results in the following warning
on boot, because the IRQ affinity has not been correctly cleaned up.
Ensure we clean up the affinity and workqueues on a failure to load the
driver.
crypto-safexcel: probe of f2800000.crypto failed with error -2
------------[ cut here ]------------
WARNING: CPU: 1 PID: 232 at kernel/irq/manage.c:1913 free_irq+0x300/0x340
Modules linked in: hwmon mdio_i2c crypto_safexcel(+) md5 sha256_generic libsha256 authenc libdes omap_rng rng_core nft_masq nft_nat nft_chain_nat nf_nat nft_ct nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables libcrc32c nfnetlink fuse autofs4
CPU: 1 PID: 232 Comm: systemd-udevd Tainted: G W 6.1.6-00002-g9d4898824677 #3
Hardware name: MikroTik RB5009 (DT)
pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : free_irq+0x300/0x340
lr : free_irq+0x2e0/0x340
sp : ffff800008fa3890
x29: ffff800008fa3890 x28: 0000000000000000 x27: 0000000000000000
x26: ffff8000008e6dc0 x25: ffff000009034cac x24: ffff000009034d50
x23: 0000000000000000 x22: 000000000000004a x21: ffff0000093e0d80
x20: ffff000009034c00 x19: ffff00000615fc00 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000 x15: 000075f5c1584c5e
x14: 0000000000000017 x13: 0000000000000000 x12: 0000000000000040
x11: ffff000000579b60 x10: ffff000000579b62 x9 : ffff800008bbe370
x8 : ffff000000579dd0 x7 : 0000000000000000 x6 : ffff000000579e18
x5 : ffff000000579da8 x4 : ffff800008ca0000 x3 : ffff800008ca0188
x2 : 0000000013033204 x1 : ffff000009034c00 x0 : ffff8000087eadf0
Call trace:
free_irq+0x300/0x340
devm_irq_release+0x14/0x20
devres_release_all+0xa0/0x100
device_unbind_cleanup+0x14/0x60
really_probe+0x198/0x2d4
__driver_probe_device+0x74/0xdc
driver_probe_device+0x3c/0x110
__driver_attach+0x8c/0x190
bus_for_each_dev+0x6c/0xc0
driver_attach+0x20/0x30
bus_add_driver+0x148/0x1fc
driver_register+0x74/0x120
__platform_driver_register+0x24/0x30
safexcel_init+0x48/0x1000 [crypto_safexcel]
do_one_initcall+0x4c/0x1b0
do_init_module+0x44/0x1cc
load_module+0x1724/0x1be4
__do_sys_finit_module+0xbc/0x110
__arm64_sys_finit_module+0x1c/0x24
invoke_syscall+0x44/0x110
el0_svc_common.constprop.0+0xc0/0xe0
do_el0_svc+0x20/0x80
el0_svc+0x14/0x4c
el0t_64_sync_handler+0xb0/0xb4
el0t_64_sync+0x148/0x14c
---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
vfio/type1: fix cap_migration information leak
Fix an information leak where an uninitialized hole in struct
vfio_iommu_type1_info_cap_migration on the stack is exposed to userspace.
The definition of struct vfio_iommu_type1_info_cap_migration contains a hole as
shown in this pahole(1) output:
struct vfio_iommu_type1_info_cap_migration {
struct vfio_info_cap_header header; /* 0 8 */
__u32 flags; /* 8 4 */
/* XXX 4 bytes hole, try to pack */
__u64 pgsize_bitmap; /* 16 8 */
__u64 max_dirty_bitmap_size; /* 24 8 */
/* size: 32, cachelines: 1, members: 4 */
/* sum members: 28, holes: 1, sum holes: 4 */
/* last cacheline: 32 bytes */
};
The cap_mig variable is filled in without initializing the hole:
static int vfio_iommu_migration_build_caps(struct vfio_iommu *iommu,
struct vfio_info_cap *caps)
{
struct vfio_iommu_type1_info_cap_migration cap_mig;
cap_mig.header.id = VFIO_IOMMU_TYPE1_INFO_CAP_MIGRATION;
cap_mig.header.version = 1;
cap_mig.flags = 0;
/* support minimum pgsize */
cap_mig.pgsize_bitmap = (size_t)1 << __ffs(iommu->pgsize_bitmap);
cap_mig.max_dirty_bitmap_size = DIRTY_BITMAP_SIZE_MAX;
return vfio_info_add_capability(caps, &cap_mig.header, sizeof(cap_mig));
}
The structure is then copied to a temporary location on the heap. At this point
it's already too late and ioctl(VFIO_IOMMU_GET_INFO) copies it to userspace
later:
int vfio_info_add_capability(struct vfio_info_cap *caps,
struct vfio_info_cap_header *cap, size_t size)
{
struct vfio_info_cap_header *header;
header = vfio_info_cap_add(caps, size, cap->id, cap->version);
if (IS_ERR(header))
return PTR_ERR(header);
memcpy(header + 1, cap + 1, size - sizeof(*header));
return 0;
}
This issue was found by code inspection. |
| In the Linux kernel, the following vulnerability has been resolved:
media: mediatek: vcodec: fix resource leaks in vdec_msg_queue_init()
If we encounter any error in the vdec_msg_queue_init() then we need
to set "msg_queue->wdma_addr.size = 0;". Normally, this is done
inside the vdec_msg_queue_deinit() function. However, if the
first call to allocate &msg_queue->wdma_addr fails, then the
vdec_msg_queue_deinit() function is a no-op. For that situation, just
set the size to zero explicitly and return.
There were two other error paths which did not clean up before returning.
Change those error paths to goto mem_alloc_err. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Fix kernel warning during topology setup
This patch fixes the following kernel warning seen during
driver load by correctly initializing the p2plink attr before
creating the sysfs file:
[ +0.002865] ------------[ cut here ]------------
[ +0.002327] kobject: '(null)' (0000000056260cfb): is not initialized, yet kobject_put() is being called.
[ +0.004780] WARNING: CPU: 32 PID: 1006 at lib/kobject.c:718 kobject_put+0xaa/0x1c0
[ +0.001361] Call Trace:
[ +0.001234] <TASK>
[ +0.001067] kfd_remove_sysfs_node_entry+0x24a/0x2d0 [amdgpu]
[ +0.003147] kfd_topology_update_sysfs+0x3d/0x750 [amdgpu]
[ +0.002890] kfd_topology_add_device+0xbd7/0xc70 [amdgpu]
[ +0.002844] ? lock_release+0x13c/0x2e0
[ +0.001936] ? smu_cmn_send_smc_msg_with_param+0x1e8/0x2d0 [amdgpu]
[ +0.003313] ? amdgpu_dpm_get_mclk+0x54/0x60 [amdgpu]
[ +0.002703] kgd2kfd_device_init.cold+0x39f/0x4ed [amdgpu]
[ +0.002930] amdgpu_amdkfd_device_init+0x13d/0x1f0 [amdgpu]
[ +0.002944] amdgpu_device_init.cold+0x1464/0x17b4 [amdgpu]
[ +0.002970] ? pci_bus_read_config_word+0x43/0x80
[ +0.002380] amdgpu_driver_load_kms+0x15/0x100 [amdgpu]
[ +0.002744] amdgpu_pci_probe+0x147/0x370 [amdgpu]
[ +0.002522] local_pci_probe+0x40/0x80
[ +0.001896] work_for_cpu_fn+0x10/0x20
[ +0.001892] process_one_work+0x26e/0x5a0
[ +0.002029] worker_thread+0x1fd/0x3e0
[ +0.001890] ? process_one_work+0x5a0/0x5a0
[ +0.002115] kthread+0xea/0x110
[ +0.001618] ? kthread_complete_and_exit+0x20/0x20
[ +0.002422] ret_from_fork+0x1f/0x30
[ +0.001808] </TASK>
[ +0.001103] irq event stamp: 59837
[ +0.001718] hardirqs last enabled at (59849): [<ffffffffb30fab12>] __up_console_sem+0x52/0x60
[ +0.004414] hardirqs last disabled at (59860): [<ffffffffb30faaf7>] __up_console_sem+0x37/0x60
[ +0.004414] softirqs last enabled at (59654): [<ffffffffb307d9c7>] irq_exit_rcu+0xd7/0x130
[ +0.004205] softirqs last disabled at (59649): [<ffffffffb307d9c7>] irq_exit_rcu+0xd7/0x130
[ +0.004203] ---[ end trace 0000000000000000 ]--- |
