| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: gate nfs2 setacl by argp->mask
The NFSACL v2 SETACL path shares the decoder convention used by its
v3 sibling: nfsaclsvc_decode_setaclargs() fills in argp->acl_access
only when NFS_ACL is set in the request mask and argp->acl_default
only when NFS_DFACL is set, leaving the other pointer NULL because
the argument buffer is zeroed up to pc_argzero before decode.
nfsacld_proc_setacl() then hands both pointers to set_posix_acl()
unconditionally. set_posix_acl(idmap, dentry, type, NULL) is the VFS
"remove this ACL type" operation, so an omitted arm is
indistinguishable from an explicit request to delete that ACL. A
SETACL carrying only NFS_ACL silently strips the directory's default
ACL; mask=0 strips both.
This is the same defect just fixed in nfsd3_proc_setacl(); apply the
same remedy. Gate each set_posix_acl() call on its mask bit and
initialize error to 0 so that a request with neither bit set leaves
the on-disk ACLs untouched and returns success. The out_drop_lock
path and the unconditional posix_acl_release() in
nfsaclsvc_release_setacl() already tolerate the skipped arms. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: fix possible fh_compose of wrong dentry in nfsd4_create_file()
dentry_create() can hypothetically provide a different dentry than the
one passed in. This could happen, for example, if the exported
filesystem is NFS, and the server returned to OPEN a filehandle which
matched a directory that was already in the dcache. Clearly this would
not be expected!
If this were to happen the dentry (child) that was already stored in
resfhp could be freed and later dereferenced.
We shouldn't call fh_compose() until we are certain that we have the
final dentry, so this patch moved the fh_compose() call to two places:
one for the case where the target already exists, and one after
dentry_create() where it was created. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: dwc3: gadget: Fix use-after-free in dwc3_gadget_free_endpoints due to race condition
In dwc3_gadget_init_endpoint, &dep->nostream_work is bound with
dwc3_nostream_work, and dwc3_gadget_endpoint_stream_event can queue
this delayed work on system_percpu_wq when a DEPEVT_STREAM_NOSTREAM
event is received.
If we remove the gadget, dwc3_gadget_free_endpoints makes cleanup and
the memory allocated for dep with kzalloc() is released by kfree(dep),
while the delayed work mentioned above may still be pending or
running. The sequence of operations that may lead to a UAF bug is as
follows:
CPU0 CPU1
| dwc3_thread_interrupt
| dwc3_endpoint_interrupt
| dwc3_gadget_endpoint_stream_event
| queue_delayed_work(system_percpu_wq,
| &dep->nostream_work)
dwc3_gadget_free_endpoints |
dwc3_free_trb_pool(dep) |
list_del(&dep->endpoint.ep_list) |
dwc3_debugfs_remove_endpoint_dir(dep) |
kfree(dep) |
// dep is freed |
| dwc3_nostream_work
| // use dep (use-after-free)
Fix it by canceling the delayed work before kfree(dep) in
dwc3_gadget_free_endpoints. |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "media: v4l2-dev: fix error handling in __video_register_device()"
This reverts commit 2a934fdb01db6458288fc9386d3d8ceba6dd551a.
The intentions of that patch were good, but it doesn't work.
The idea is that if device_register fails, you have to do a put_device
to let the ref counter release resources.
However, the V4L2 API says that if video_register_device() fails, then
you have to call video_device_release(), which kfree()s the video_device
struct.
But the put_device() will already have freed the struct, so you end
up in a double-free scenario.
There is not really a good way of fixing this without breaking
video_register_device() into two parts, one that initializes everything,
and one that does the actual device_register, and then converting all
V4L2 drivers to this new model.
That is a massive job, and it is very unlikely that device_register
will fail.
So rather than ending up in a double-free scenario, just revert this
patch, and in that case we'll have a small memory leak. Which is a lot
more robust. |
| An issue was discovered in OpenStack Keystone before 29.0.3. Tokens obtained via delegated authentication methods (EC2 credentials, application credentials, OAuth1 access tokens, and trusts) are not blocked from creating, modifying, or deleting credentials via the /v3/credentials API. EC2-derived tokens can additionally read credential blobs, exposing TOTP MFA seeds and other secrets. Also, PATCH /v3/credentials does not validate the requested post-update project_id, allowing any delegated token to move a credential to an unauthorized project. All Keystone deployments using delegated authentication are affected. |
| A web interface reflects a portion of the request URL into a script context and a hyperlink attribute without adequate encoding, and does not require authentication to reach. This allows an unauthenticated network attacker to craft a link that, when visited by a user, executes arbitrary script in the context of the affected application and can redirect the user's browser to an arbitrary external site. Successful exploitation could allow an attacker to act with the compromised user's session privileges within the application. |
| An interface that accepts file uploads from authenticated users extracts the contents of uploaded archives without validating that extracted file paths remain within the intended destination directory. This allows an authenticated attacker to craft an archive whose entries traverse outside the destination directory, causing the extraction process to write files to arbitrary locations with the privileges of that process. This could allow an attacker to inject fabricated records into the system's stored data or tamper with application configuration. |
| When a particular authentication mode is configured, the reverse proxy forwards requests for a bundled third-party administrative interface directly to that interface without applying the gateway's own authentication requirement first. All access control for this administrative interface, which manages the credential store used to gate every other service in the deployment, is delegated entirely to that third-party interface's own login mechanism. Any authentication weakness in that bundled interface would compromise the credential store protecting the rest of the deployment. |
| An example environment-configuration file ships with a fixed, publicly-known secret value used to sign authentication cookies for a bundled packet-analysis component. A deployment that copies this example file into active configuration without running the setup routine that regenerates the value will use the known default, allowing an attacker aware of the default to forge valid authentication cookies for that component. |
| The YayPricing WordPress plugin before 3.5.7 does not perform an authorization check on a REST route that saves its pricing rules, allowing users with the subscriber role and above to store JavaScript that executes in the browser of an administrator who opens the YayPricing WordPress plugin before 3.5.7's settings page. |
| The Rox Appointment Booking WordPress plugin before 1.2.0 does not verify the order total or the selected payment method against its own server-side pricing when creating a booking, allowing unauthenticated attackers to create confirmed bookings at an arbitrary price and to bypass the site's configured payment-method restrictions. |
| The Rox Appointment Booking WordPress plugin before 1.2.3 does not perform any authorization check on the endpoint that returns a booking's confirmation details, and each booking is addressed by a sequential numeric identifier, allowing unauthenticated attackers to read any customer's name, email, phone, booking details and payment status by enumerating that identifier. |
| The WPBot WordPress plugin before 8.6.0 does not perform any capability or nonce check on the AJAX action that lists stored chat sessions, allowing unauthenticated attackers to retrieve the name, email address and phone number of every chat visitor by requesting a wide date range. |
| The Product XML Feed Manager for WooCommerce WordPress plugin before 3.1.1 does not restrict which object method its product shortcode may call, nor check the user's capability over the targeted product, allowing users with contributor-level access to delete arbitrary WooCommerce products by previewing a post that contains the shortcode. |
| A prior update that raised a bundled HTTP client library to a version remediating known vulnerabilities was later reverted, reintroducing the earlier, vulnerable version into a log-processing component. The only code path in that component using the library issues a request to a single fixed, trusted vendor URL at initialization and does not process attacker-controlled input through the library, limiting practical exploitability of the reintroduced version in this context. |
| An example environment-configuration file for a bundled inventory-management component ships with a fixed, publicly-known administrative password. A deployment that copies this example file into active configuration without running the setup routine that regenerates credentials will expose that component's administrative interface to anyone aware of the default value. |
| The administrative password is hashed using a comparatively weak, fast algorithm for the credential store backing one authentication path, and the file containing that hash is written with permissions allowing it to be read by any local user. This is inconsistent with a separate, stronger hashing algorithm used for the same password on another authentication path. A party able to read this file, including a local user or a party with access to a configuration backup, could feasibly recover the underlying password through offline computation, compromising the administrative credential across every path that accepts it. |
| The CODE MONKEYS PROPOSALS WordPress plugin through 1.0.1 does not validate a user-supplied file path before deleting a file, and does not check the capability of the user making the request, allowing any authenticated user, such as a subscriber, to delete arbitrary files on the server, which can lead to a site takeover. |
| The WebTotem Backups WordPress plugin through 1.0.1 does not validate a user-supplied file path, does not check the capability of the user making the request, and discards the result of its own CSRF check, allowing any authenticated user, such as a subscriber, to delete arbitrary files on the server, which can lead to a site takeover. |
| The Booking for Appointments and Events Calendar WordPress plugin before 9.8.1 does not verify that a payment was actually taken before recording a booking as paid, trusting the payment gateway named in a public, unauthenticated booking request even when the site has never configured that gateway. This lets an unauthenticated attacker obtain confirmed, fully paid appointments and events without any payment being collected. |
