| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: sysfs: fix chip removal with GPIOs exported over sysfs
Currently if we export a GPIO over sysfs and unbind the parent GPIO
controller, the exported attribute will remain under /sys/class/gpio
because once we remove the parent device, we can no longer associate the
descriptor with it in gpiod_unexport() and never drop the final
reference.
Rework the teardown code: provide an unlocked variant of
gpiod_unexport() and remove all exported GPIOs with the sysfs_lock taken
before unregistering the parent device itself. This is done to prevent
any new exports happening before we unregister the device completely. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: vt8500lcdfb: fix missing dma_free_coherent()
fbi->fb.screen_buffer is allocated with dma_alloc_coherent() but is not
freed if the error path is reached. |
| In the Linux kernel, the following vulnerability has been resolved:
net: airoha: Fix memory leak in airoha_qdma_rx_process()
If an error occurs on the subsequents buffers belonging to the
non-linear part of the skb (e.g. due to an error in the payload length
reported by the NIC or if we consumed all the available fragments for
the skb), the page_pool fragment will not be linked to the skb so it will
not return to the pool in the airoha_qdma_rx_process() error path. Fix the
memory leak partially reverting commit 'd6d2b0e1538d ("net: airoha: Fix
page recycling in airoha_qdma_rx_process()")' and always running
page_pool_put_full_page routine in the airoha_qdma_rx_process() error
path. |
| In the Linux kernel, the following vulnerability has been resolved:
soc: ti: k3-socinfo: Fix regmap leak on probe failure
The mmio regmap allocated during probe is never freed.
Switch to using the device managed allocator so that the regmap is
released on probe failures (e.g. probe deferral) and on driver unbind. |
| In the Linux kernel, the following vulnerability has been resolved:
media: i2c/tw9906: Fix potential memory leak in tw9906_probe()
In one of the error paths in tw9906_probe(), the memory allocated in
v4l2_ctrl_handler_init() and v4l2_ctrl_new_std() is not freed. Fix that
by calling v4l2_ctrl_handler_free() on the handler in that error path. |
| In the Linux kernel, the following vulnerability has been resolved:
dm: remove fake timeout to avoid leak request
Since commit 15f73f5b3e59 ("blk-mq: move failure injection out of
blk_mq_complete_request"), drivers are responsible for calling
blk_should_fake_timeout() at appropriate code paths and opportunities.
However, the dm driver does not implement its own timeout handler and
relies on the timeout handling of its slave devices.
If an io-timeout-fail error is injected to a dm device, the request
will be leaked and never completed, causing tasks to hang indefinitely.
Reproduce:
1. prepare dm which has iscsi slave device
2. inject io-timeout-fail to dm
echo 1 >/sys/class/block/dm-0/io-timeout-fail
echo 100 >/sys/kernel/debug/fail_io_timeout/probability
echo 10 >/sys/kernel/debug/fail_io_timeout/times
3. read/write dm
4. iscsiadm -m node -u
Result: hang task like below
[ 862.243768] INFO: task kworker/u514:2:151 blocked for more than 122 seconds.
[ 862.244133] Tainted: G E 6.19.0-rc1+ #51
[ 862.244337] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 862.244718] task:kworker/u514:2 state:D stack:0 pid:151 tgid:151 ppid:2 task_flags:0x4288060 flags:0x00080000
[ 862.245024] Workqueue: iscsi_ctrl_3:1 __iscsi_unbind_session [scsi_transport_iscsi]
[ 862.245264] Call Trace:
[ 862.245587] <TASK>
[ 862.245814] __schedule+0x810/0x15c0
[ 862.246557] schedule+0x69/0x180
[ 862.246760] blk_mq_freeze_queue_wait+0xde/0x120
[ 862.247688] elevator_change+0x16d/0x460
[ 862.247893] elevator_set_none+0x87/0xf0
[ 862.248798] blk_unregister_queue+0x12e/0x2a0
[ 862.248995] __del_gendisk+0x231/0x7e0
[ 862.250143] del_gendisk+0x12f/0x1d0
[ 862.250339] sd_remove+0x85/0x130 [sd_mod]
[ 862.250650] device_release_driver_internal+0x36d/0x530
[ 862.250849] bus_remove_device+0x1dd/0x3f0
[ 862.251042] device_del+0x38a/0x930
[ 862.252095] __scsi_remove_device+0x293/0x360
[ 862.252291] scsi_remove_target+0x486/0x760
[ 862.252654] __iscsi_unbind_session+0x18a/0x3e0 [scsi_transport_iscsi]
[ 862.252886] process_one_work+0x633/0xe50
[ 862.253101] worker_thread+0x6df/0xf10
[ 862.253647] kthread+0x36d/0x720
[ 862.254533] ret_from_fork+0x2a6/0x470
[ 862.255852] ret_from_fork_asm+0x1a/0x30
[ 862.256037] </TASK>
Remove the blk_should_fake_timeout() check from dm, as dm has no
native timeout handling and should not attempt to fake timeouts. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: fix memory leak on failure path
cfg80211_inform_bss_frame() may return NULL on failure. In that case,
the allocated buffer 'buf' is not freed and the function returns early,
leading to potential memory leak.
Fix this by ensuring that 'buf' is freed on both success and failure paths. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/zcrx: fix sgtable leak on mapping failures
In an unlikely case when io_populate_area_dma() fails, which could only
happen on a PAGE_POOL_32BIT_ARCH_WITH_64BIT_DMA machine,
io_zcrx_map_area() will have an initialised and not freed table. It was
supposed to be cleaned up in the error path, but !is_mapped prevents
that. |
| In the Linux kernel, the following vulnerability has been resolved:
media: radio-keene: fix memory leak in error path
Fix a memory leak in usb_keene_probe(). The v4l2 control handler is
initialized and controls are added, but if v4l2_device_register() or
video_register_device() fails afterward, the handler was never freed,
leaking memory.
Add v4l2_ctrl_handler_free() call in the err_v4l2 error path to ensure
the control handler is properly freed for all error paths after it is
initialized. |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: Fix RSS context delete logic
We need to free the corresponding RSS context VNIC
in FW everytime an RSS context is deleted in driver.
Commit 667ac333dbb7 added a check to delete the VNIC
in FW only when netif_running() is true to help delete
RSS contexts with interface down.
Having that condition will make the driver leak VNICs
in FW whenever close() happens with active RSS contexts.
On the subsequent open(), as part of RSS context restoration,
we will end up trying to create extra VNICs for which we
did not make any reservation. FW can fail this request,
thereby making us lose active RSS contexts.
Suppose an RSS context is deleted already and we try to
process a delete request again, then the HWRM functions
will check for validity of the request and they simply
return if the resource is already freed. So, even for
delete-when-down cases, netif_running() check is not
necessary.
Remove the netif_running() condition check when deleting
an RSS context. |
| In the Linux kernel, the following vulnerability has been resolved:
net: qrtr: replace qrtr_tx_flow radix_tree with xarray to fix memory leak
__radix_tree_create() allocates and links intermediate nodes into the
tree one by one. If a subsequent allocation fails, the already-linked
nodes remain in the tree with no corresponding leaf entry. These orphaned
internal nodes are never reclaimed because radix_tree_for_each_slot()
only visits slots containing leaf values.
The radix_tree API is deprecated in favor of xarray. As suggested by
Matthew Wilcox, migrate qrtr_tx_flow from radix_tree to xarray instead
of fixing the radix_tree itself [1]. xarray properly handles cleanup of
internal nodes — xa_destroy() frees all internal xarray nodes when the
qrtr_node is released, preventing the leak.
[1] https://lore.kernel.org/all/20260225071623.41275-1-jiayuan.chen@linux.dev/T/ |
| In the Linux kernel, the following vulnerability has been resolved:
usb: misc: usbio: Fix URB memory leak on submit failure
When usb_submit_urb() fails in usbio_probe(), the previously allocated
URB is never freed, causing a memory leak.
Fix this by jumping to err_free_urb label to properly release the URB
on the error path. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: gyro: mpu3050: Fix irq resource leak
The interrupt handler is setup but only a few lines down if
iio_trigger_register() fails the function returns without properly
releasing the handler.
Add cleanup goto to resolve resource leak.
Detected by Smatch:
drivers/iio/gyro/mpu3050-core.c:1128 mpu3050_trigger_probe() warn:
'irq' from request_threaded_irq() not released on lines: 1124. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: hci_cmd_sync_queue_once() return -EEXIST if exists
hci_cmd_sync_queue_once() needs to indicate whether a queue item was
added, so caller can know if callbacks are called, so it can avoid
leaking resources.
Change the function to return -EEXIST if queue item already exists.
Modify all callsites to handle that. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: fix leaks when hci_cmd_sync_queue_once fails
When hci_cmd_sync_queue_once() returns with error, the destroy callback
will not be called.
Fix leaking references / memory on these failures. |
| In the Linux kernel, the following vulnerability has been resolved:
net: macb: properly unregister fixed rate clocks
The additional resources allocated with clk_register_fixed_rate() need
to be released with clk_unregister_fixed_rate(), otherwise they are lost. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/qaic: Handle DBC deactivation if the owner went away
When a DBC is released, the device sends a QAIC_TRANS_DEACTIVATE_FROM_DEV
transaction to the host over the QAIC_CONTROL MHI channel. QAIC handles
this by calling decode_deactivate() to release the resources allocated for
that DBC. Since that handling is done in the qaic_manage_ioctl() context,
if the user goes away before receiving and handling the deactivation, the
host will be out-of-sync with the DBCs available for use, and the DBC
resources will not be freed unless the device is removed. If another user
loads and requests to activate a network, then the device assigns the same
DBC to that network, QAIC will "indefinitely" wait for dbc->in_use = false,
leading the user process to hang.
As a solution to this, handle QAIC_TRANS_DEACTIVATE_FROM_DEV transactions
that are received after the user has gone away. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: idxd: Fix memory leak when a wq is reset
idxd_wq_disable_cleanup() which is called from the reset path for a
workqueue, sets the wq type to NONE, which for other parts of the
driver mean that the wq is empty (all its resources were released).
Only set the wq type to NONE after its resources are released. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/zcrypt: Fix memory leak with CCA cards used as accelerator
Tests showed that there is a memory leak if CCA cards are used as
accelerator for clear key RSA requests (ME and CRT). With the last
rework for the memory allocation the AP messages are allocated by
ap_init_apmsg() but for some reason on two places (ME and CRT) the
older allocation was still in place. So the first allocation simple
was never freed. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: avoid infinite loops caused by residual data
On the mkdir/mknod path, when mapping logical blocks to physical blocks,
if inserting a new extent into the extent tree fails (in this example,
because the file system disabled the huge file feature when marking the
inode as dirty), ext4_ext_map_blocks() only calls ext4_free_blocks() to
reclaim the physical block without deleting the corresponding data in
the extent tree. This causes subsequent mkdir operations to reference
the previously reclaimed physical block number again, even though this
physical block is already being used by the xattr block. Therefore, a
situation arises where both the directory and xattr are using the same
buffer head block in memory simultaneously.
The above causes ext4_xattr_block_set() to enter an infinite loop about
"inserted" and cannot release the inode lock, ultimately leading to the
143s blocking problem mentioned in [1].
If the metadata is corrupted, then trying to remove some extent space
can do even more harm. Also in case EXT4_GET_BLOCKS_DELALLOC_RESERVE
was passed, remove space wrongly update quota information.
Jan Kara suggests distinguishing between two cases:
1) The error is ENOSPC or EDQUOT - in this case the filesystem is fully
consistent and we must maintain its consistency including all the
accounting. However these errors can happen only early before we've
inserted the extent into the extent tree. So current code works correctly
for this case.
2) Some other error - this means metadata is corrupted. We should strive to
do as few modifications as possible to limit damage. So I'd just skip
freeing of allocated blocks.
[1]
INFO: task syz.0.17:5995 blocked for more than 143 seconds.
Call Trace:
inode_lock_nested include/linux/fs.h:1073 [inline]
__start_dirop fs/namei.c:2923 [inline]
start_dirop fs/namei.c:2934 [inline] |
