| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A malformed packet can cause a buffer overflow in the NWK/APS layer of the Ember ZNet stack and lead to an assert |
| changedetection.io is an open source web page change detection, website watcher, restock monitor and notification service. There is a Server Side Template Injection (SSTI) in Jinja2 that allows Remote Command Execution on the server host. Attackers can run any system command without any restriction and they could use a reverse shell. The impact is critical as the attacker can completely takeover the server machine. This can be reduced if changedetection is behind a login page, but this isn't required by the application (not by default and not enforced). |
| Insecure default settings have been found in recorder products provided by Yokogawa Electric Corporation. The default setting of the authentication function is disabled on the affected products. Therefore, when connected to a network with default settings, anyone can access all functions related to settings and operations. As a result, an attacker can illegally manipulate and configure important data such as measured values and settings.
This issue affects GX10 / GX20 / GP10 / GP20 Paperless Recorders: R5.04.01 or earlier; GM Data Acquisition System: R5.05.01 or earlier; DX1000 / DX2000 / DX1000N Paperless Recorders: R4.21 or earlier; FX1000 Paperless Recorders: R1.31 or earlier; μR10000 / μR20000 Chart Recorders: R1.51 or earlier; MW100 Data Acquisition Units: All versions; DX1000T / DX2000T Paperless Recorders: All versions; CX1000 / CX2000 Paperless Recorders: All versions. |
| The Honeywell Experion PKS and OneWireless WDM contains a Memory Buffer vulnerability in the component Control Data Access (CDA). An attacker could potentially exploit this vulnerability, leading to an Overread Buffers, which could result in improper index validation against buffer borders leading to remote code execution.
Honeywell recommends updating to the most recent version of Honeywell Experion PKS:
520.2 TCU9 HF1 and 530.1 TCU3 HF1 and OneWireless: 322.5 and 331.1.
The affected Experion PKS products are C300 PCNT02, C300 PCNT05, FIM4, FIM8, UOC, CN100, HCA, C300PM, and C200E. The Experion PKS versions affected are from 520.1 through 520.2 TCU9 and from 530 through 530 TCU3.The OneWireless WDM affected versions are 322.1 through 322.4 and 330.1 through 330.3. |
| CGI::Simple versions before 1.282 for Perl has a HTTP response splitting flaw
This vulnerability is a confirmed HTTP response splitting flaw in CGI::Simple that allows HTTP response header injection, which can be used for reflected XSS or open redirect under certain conditions.
Although some validation exists, it can be bypassed using URL-encoded values, allowing an attacker to inject untrusted content into the response via query parameters.
As a result, an attacker can inject a line break (e.g. %0A) into the parameter value, causing the server to split the HTTP response and inject arbitrary headers or even an HTML/JavaScript body, leading to reflected cross-site scripting (XSS), open redirect or other attacks.
The issue documented in CVE-2010-4410 https://www.cve.org/CVERecord?id=CVE-2010-4410 is related but the fix was incomplete.
Impact
By injecting %0A (newline) into a query string parameter, an attacker can:
* Break the current HTTP header
* Inject a new header or entire body
* Deliver a script payload that is reflected in the server’s response
That can lead to the following attacks:
* reflected XSS
* open redirect
* cache poisoning
* header manipulation |
| Description
In Spring Framework, versions 6.0.x as of 6.0.5, versions 6.1.x and 6.2.x, an application is vulnerable to a reflected file download (RFD) attack when it sets a “Content-Disposition” header with a non-ASCII charset, where the filename attribute is derived from user-supplied input.
Specifically, an application is vulnerable when all the following are true:
* The header is prepared with org.springframework.http.ContentDisposition.
* The filename is set via ContentDisposition.Builder#filename(String, Charset).
* The value for the filename is derived from user-supplied input.
* The application does not sanitize the user-supplied input.
* The downloaded content of the response is injected with malicious commands by the attacker (see RFD paper reference for details).
An application is not vulnerable if any of the following is true:
* The application does not set a “Content-Disposition” response header.
* The header is not prepared with org.springframework.http.ContentDisposition.
* The filename is set via one of: * ContentDisposition.Builder#filename(String), or
* ContentDisposition.Builder#filename(String, ASCII)
* The filename is not derived from user-supplied input.
* The filename is derived from user-supplied input but sanitized by the application.
* The attacker cannot inject malicious content in the downloaded content of the response.
Affected Spring Products and VersionsSpring Framework:
* 6.2.0 - 6.2.7
* 6.1.0 - 6.1.20
* 6.0.5 - 6.0.28
* Older, unsupported versions are not affected
MitigationUsers of affected versions should upgrade to the corresponding fixed version.
Affected version(s)Fix versionAvailability6.2.x6.2.8OSS6.1.x6.1.21OSS6.0.x6.0.29 Commercial https://enterprise.spring.io/ No further mitigation steps are necessary.
CWE-113 in `Content-Disposition` handling in VMware Spring Framework versions 6.0.5 to 6.2.7 allows remote attackers to launch Reflected File Download (RFD) attacks via unsanitized user input in `ContentDisposition.Builder#filename(String, Charset)` with non-ASCII charsets. |
| An unauthenticated remote attacker, who beats a race condition, can exploit a flaw in the communication servers of the CODESYS Control runtime system on Linux and QNX to trigger an out-of-bounds read via crafted socket communication, potentially causing a denial of service. |
| A vulnerability has been found in Nixdorf Wincor PORT IO Driver up to 1.0.0.1. This affects the function sub_11100 in the library wnport.sys of the component IOCTL Handler. Such manipulation leads to stack-based buffer overflow. Local access is required to approach this attack. The exploit has been disclosed to the public and may be used. Upgrading to version 3.0.0.1 is able to mitigate this issue. Upgrading the affected component is recommended. The vendor was contacted beforehand and was able to provide a patch very early. |
| wb2osz/direwolf (Dire Wolf) versions up to and including 1.8, prior to commit 694c954, contain a stack-based buffer overflow vulnerability in the function kiss_rec_byte() located in src/kiss_frame.c. When processing crafted KISS frames that reach the maximum allowed frame length (MAX_KISS_LEN), the function appends a terminating FEND byte without reserving sufficient space in the stack buffer. This results in an out-of-bounds write followed by an out-of-bounds read during the subsequent call to kiss_unwrap(), leading to stack memory corruption or application crashes. This vulnerability may allow remote unauthenticated attackers to trigger a denial-of-service condition. |
| A vulnerability was found in PX4-Autopilot 1.12.3. It has been classified as problematic. This affects the function MavlinkReceiver::handle_message_trajectory_representation_waypoints of the file mavlink_receiver.cpp of the component TRAJECTORY_REPRESENTATION_WAYPOINTS Message Handler. The manipulation leads to stack-based buffer overflow. Local access is required to approach this attack. The exploit has been disclosed to the public and may be used. |
| A vulnerability was determined in Cudy WR1200EA 2.3.7-20250113-121810. Affected is an unknown function of the file /etc/shadow. Executing manipulation can lead to use of default password. The attack needs to be launched locally. A high complexity level is associated with this attack. The exploitability is told to be difficult. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way. |
| KV STUDIO and VT5-WX15/WX12 contain a stack-based buffer overflow vulnerability. If the product uses a specially crafted file, arbitrary code may be executed on the affected product. |
| Missing protection mechanism for alternate hardware interface in the Intel(R) Quick Assist Technology for some Intel(R) Platforms within Ring 0: Kernel may allow an escalation of privilege. System software adversary with a privileged user combined with a low complexity attack may enable escalation of privilege. This result may potentially occur via local access when attack requirements are present with special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (high), integrity (high) and availability (none) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| A vulnerability exists in the 'counterpart' library for Node.js and the browser due to insufficient sanitization of user-controlled input in translation key processing. The affected versions prior to 0.18.6 allow attackers to manipulate the library's translation functionality by supplying maliciously crafted keys containing prototype chain elements (e.g., __proto__ ), leading to prototype pollution. This weakness enables adversaries to inject arbitrary properties into the JavaScript Object prototype through the first parameter of the translate method when combined with specific separator configurations, potentially resulting in denial-of-service conditions or remote code execution in vulnerable applications. The issue arises from the library's failure to properly validate or neutralize special characters in translation key inputs before processing. |
| Synapse is an open source Matrix homeserver implementation. Lack of validation for device keys in Synapse before 1.138.3 and in Synapse 1.139.0 allow an attacker registered on the victim homeserver to degrade federation functionality, unpredictably breaking outbound federation to other homeservers. The issue is patched in Synapse 1.138.3, 1.138.4, 1.139.1, and 1.139.2. Note that even though 1.138.3 and 1.139.1 fix the vulnerability, they inadvertently introduced an unrelated regression. For this reason, the maintainers of Synapse recommend skipping these releases and upgrading straight to 1.138.4 and 1.139.2. |
| B64dec 1.1.2 contains a buffer overflow vulnerability that allows attackers to execute arbitrary code by overwriting Structured Exception Handler (SEH) with crafted input. Attackers can leverage an egg hunter technique and carefully constructed payload to inject and execute malicious code during base64 decoding process. |
| pyLoad is a free and open-source download manager written in Python. In versions prior to 0.5.0b3.dev91, pyLoad web interface contained insufficient input validation in both the Captcha script endpoint and the Click'N'Load (CNL) Blueprint. This flaw allowed untrusted user input to be processed unsafely, which could be exploited by an attacker to inject arbitrary content into the web UI or manipulate request handling. The vulnerability could lead to client-side code execution (XSS) or other unintended behaviors when a malicious payload is submitted. user-supplied parameters from HTTP requests were not adequately validated or sanitized before being passed into the application logic and response generation. This allowed crafted input to alter the expected execution flow. CNL (Click'N'Load) blueprint exposed unsafe handling of untrusted parameters in HTTP requests. The application did not consistently enforce input validation or encoding, making it possible for an attacker to craft malicious requests. Version 0.5.0b3.dev91 contains a patch for the issue. |
| A binding to an unrestricted IP address vulnerability was discovered in Productivity Suite software version v4.4.1.19. The vulnerability allows an unauthenticated remote attacker to interact with the ProductivityService PLC simulator and read, write, or delete arbitrary files and folders on the target machine |
| A vulnerability was found in juliangruber brace-expansion up to 1.1.11/2.0.1/3.0.0/4.0.0. It has been rated as problematic. Affected by this issue is the function expand of the file index.js. The manipulation leads to inefficient regular expression complexity. The attack may be launched remotely. The complexity of an attack is rather high. The exploitation is known to be difficult. The exploit has been disclosed to the public and may be used. Upgrading to version 1.1.12, 2.0.2, 3.0.1 and 4.0.1 is able to address this issue. The name of the patch is a5b98a4f30d7813266b221435e1eaaf25a1b0ac5. It is recommended to upgrade the affected component. |
| SpotFTP-FTP Password Recover 2.4.8 contains a denial of service vulnerability that allows attackers to crash the application by generating a large buffer overflow. Attackers can create a text file with 1000 'Z' characters and input it as a registration code to trigger the application crash. |
