| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
vsock/virtio: read virtqueues under worker locks
Commit bd50c5dc182b ("vsock/virtio: add support for device
suspend/resume") made the *_run flags transition from false to true when
restore installs replacement virtqueues. The RX, TX and event workers
read their virtqueue before locking and checking the corresponding flag,
so a worker delayed across freeze and restore can observe the replacement
queue's running state while retaining a pointer to the deleted queue.
Read each virtqueue under its mutex after checking the run flag, keeping
the pointer and state in the same queue generation. |
| In the Linux kernel, the following vulnerability has been resolved:
net/dibs: Correct freeing of dmb_clientid_arr
A dibs device interrupt handler can be active after dibs_dev_del() and
may still access dmb_clientid_arr. (UAF)
In case of a failure in dibs_dev_add() being called by dibs_lo_dev_probe()
dmb_clientid_arr is freed twice (double free).
Free dmb_clientid_arr in dibs_dev_release() after last reference is gone.
Note that allocating in dibs_dev_add() instead of dibs_dev_alloc() is ok
for now, because no dmbs can be registered before dibs_dev_add(). |
| In the Linux kernel, the following vulnerability has been resolved:
net: fix skb length accounting after generic XDP frag adjustment
Generic XDP exposes non-linear skb fragments through an xdp_buff. If an
XDP program adjusts the fragment area, bpf_prog_run_generic_xdp() copies
xdp_frags_size back to skb->data_len but leaves skb->len containing the
old fragment contribution.
After a fragment shrink, this makes skb_headlen() larger than the actual
linear area. In the reproduced UDP receive path, __skb_datagram_iter()
copied 1024 bytes past the actual linear tail to userspace, starting at
struct skb_shared_info. The copied bytes included the affected skb's
nr_frags, xdp_frags_size and a kernel pointer from
skb_shinfo(skb)->frags[0]. Real packet data was displaced by the same
amount and truncated at the end.
Subtract the old data_len before replacing it and add the new data_len
afterwards, keeping skb->len and skb->data_len synchronized.
A 60000-byte UDP datagram on a veth pair with MTU 64000 was shortened by
1024 bytes from its fragment area. Before the fix, all 10 runs produced
corrupted payloads. After the fix, all 10 runs matched the expected
payload exactly. |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: fix TOCTOU race between smc_listen_out() and listener close
smc_listen_out() reads lsmc->sk.sk_state without the listener lock,
then acquires lock_sock_nested() only after the check passes. This
opens a window where smc_close_active() can transition the listener
to SMC_CLOSED, call smc_close_cleanup_listen() to drain the accept
queue, and release the lock, all between the lockless read and the
delayed lock acquisition:
smc_listen_work (smc_hs_wq) smc_close_active()
------------------------------- -------------------------
release_sock(child)
if (sk_state == SMC_LISTEN) TRUE
lock_sock(listener)
sk_state = SMC_CLOSED
smc_close_cleanup_listen()
release_sock(listener)
flush_work(tcp_listen_work)
lock_sock_nested(listener)
smc_accept_enqueue(listener, child) /* child enqueued on dead listener */
smc_close_active() flushes only tcp_listen_work. Work items already
dispatched onto smc_hs_wq for the CLC handshake continue running
unguarded. smc_accept_enqueue() takes a sock_hold() on the child that
is never released, so the child smc_sock, its clcsock, and the
reference all leak. A remote peer that opens TCP connections while the
server calls close() can exhaust kernel memory.
Move lock_sock_nested() to before the sk_state check so that the test
and the enqueue are atomic under the listener lock. |
| In the Linux kernel, the following vulnerability has been resolved:
net/openvswitch: check Ethernet header length in key_extract()
When a packet arrives on an ARPHRD_NONE device (e.g. TUN),
ovs_flow_key_extract() trusts the user-provided skb->protocol field: if
it is ETH_P_TEB, the packet is classified as MAC_PROTO_ETHERNET and
key_extract() is called without ensuring the skb has ETH_HLEN (14) bytes
of linear data. key_extract() unconditionally pulls 2 * ETH_ALEN bytes
for MAC addresses and parse_ethertype() pulls 2 more, either of which
triggers a kernel BUG in __skb_pull() when the linear area is too small.
kernel BUG at include/linux/skbuff.h:2848!
RIP: 0010:key_extract+0xa7e/0xd90 net/openvswitch/flow.c:933
ovs_flow_key_extract+0x419/0xa70
ovs_vport_receive+0x222/0x390
netdev_frame_hook+0x3e0/0x630
tun_get_user+0x2d0c/0x38e0
Fixed by calling check_header() in key_extract() before accessing the
Ethernet header. |
| In the Linux kernel, the following vulnerability has been resolved:
bonding: alb: re-check primary_is_promisc under RTNL in bond_alb_monitor
bond_alb_monitor() reads primary_is_promisc under RCU, then drops RCU and
takes RTNL via rtnl_trylock() before undoing the promiscuity it set on the
active slave. In that window the active slave can change under RTNL
(RTM_DELLINK -> __bond_release_one() -> bond_alb_handle_active_change()),
which already drops the promiscuity and clears primary_is_promisc. The
monitor still acts on the stale decision: if the slave was removed with no
failover, curr_active_slave is now NULL and the deref faults; if it failed
over, the stale dev_set_promiscuity(-1) underflows the new slave's
promiscuity counter and pins it in IFF_PROMISC.
Oops: general protection fault, probably for non-canonical address ...
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
Workqueue: b42 bond_alb_monitor
RIP: 0010:bond_alb_monitor (drivers/net/bonding/bond_alb.c:1600)
process_one_work (kernel/workqueue.c:3322)
worker_thread (kernel/workqueue.c:3486)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
Kernel panic - not syncing: Fatal exception
Re-check primary_is_promisc (and curr_active_slave) after taking RTNL so
the monitor only undoes an increment it still owns. The other bonding
monitors already re-read state under RTNL in their commit phase
(bond_miimon_commit/bond_ab_arp_commit); bond_alb_monitor() was the only
one acting on the pre-trylock decision. |
| Missing authorization in Checkmk <2.5.0p12, <2.4.0p36, <2.3.0p50 and all 2.2.0 versions allows an authenticated user who knows the ID of a background job to view that job's status and results. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: reject overly deep qdisc hierarchies
Deep qdisc hierarchies can lead to excessive recursion in qdisc tree
walkers and exhaust the kernel stack. The existing loop check does not
cover the create-and-graft path, so a hierarchy can still be extended by
creating a new child qdisc below an already deep parent.
Store the hierarchy depth in struct Qdisc and update it when qdiscs are
grafted. Reject new child qdiscs once the parent is already at the maximum
allowed depth. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix netns reference imbalance in conntrack kfuncs
The opts argument of the BPF conntrack kfuncs can point to a shared
map value. __bpf_nf_ct_lookup() and __bpf_nf_ct_alloc_entry() read
opts->netns_id separately when acquiring and releasing the network
namespace reference.
The reference imbalance can occur as follows:
CPU 0 CPU 1
read opts->netns_id (-1)
skip get_net_ns_by_id()
write opts->netns_id (id)
read opts->netns_id (id)
put_net(net) /* no matching get */
The reverse transition leaks the reference. Repeating the unmatched put
can destroy a live namespace and crash later users.
The kernel reported:
Oops: general protection fault, probably for non-canonical address
KASAN: null-ptr-deref in range [0x00000000000000e8-0x00000000000000ef]
RIP: 0010:bpf_prog_test_run_xdp+0x52c/0x1700
Call Trace:
__sys_bpf+0x1662/0x50c0
__x64_sys_bpf+0x73/0xb0
do_syscall_64+0xf9/0x540
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Kernel panic - not syncing: Fatal exception
Snapshot every input field of opts with READ_ONCE() before validating or
using it. The netns_id snapshot keeps the namespace get/put pair
balanced, while the other snapshots keep the remaining options from
changing partway through an invocation. The individual reads can still
observe an inconsistent combination during a concurrent update, but each
selected field value remains stable for that invocation. |
| In the Linux kernel, the following vulnerability has been resolved:
ovpn: skip rehash for peers already removed from by_id
ovpn_nl_peer_set_doit() resolves the target peer via
ovpn_peer_get_by_id() before taking ovpn->lock. In the window between
the lookup (which only takes a refcount) and the subsequent
spin_lock_bh(&ovpn->lock), a concurrent OVPN_CMD_PEER_DEL, keepalive
expiry, or socket teardown can take ovpn->lock first, run
ovpn_peer_remove() to unhash the peer from all four tables (by_id,
by_vpn_addr4/6, by_transp_addr) and release the lock. set_doit then
acquires ovpn->lock and calls ovpn_peer_hash_vpn_ip(), which
re-inserts the now-removed peer back into the rehashing tables.
The same race affects the float path: ovpn_peer_endpoints_update()
holds only a refcount and acquires ovpn->lock very late (after async
AEAD decrypt and a netlink notification), then rehashes the peer
in the by_transp_addr table.
The resurrected peer becomes reachable again from the RX lookup
(ovpn_peer_get_by_transp_addr) and the TX VPN-IP lookup, even though
userspace believes it is gone. Once the data-path refcount drops the
peer is freed via call_rcu while the hash entries embedded in it
remain linked, opening a UAF window.
Bail out of the rehash when hash_entry_id is unhashed, mirroring
the sentinel already used by ovpn_peer_remove() to detect the
already-removed state. The check is safe under ovpn->lock, which
serializes every mutation of hash_entry_id, and is a no-op for the
add path because ovpn_peer_add_mp() inserts hash_entry_id before
calling ovpn_peer_hash_vpn_ip(). |
| The Verdure Core plugin for WordPress is vulnerable to Local File Inclusion in all versions up to, and including, 1.2. This makes it possible for unauthenticated attackers to include and execute arbitrary files on the server, allowing the execution of any PHP code in those files. This can be used to bypass access controls, obtain sensitive data, or achieve code execution in cases where images and other “safe” file types can be uploaded and included. |
| The NotificationX Pro plugin for WordPress is vulnerable to Stored Cross-Site Scripting in all versions up to, and including, 3.1.4 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| In the Linux kernel, the following vulnerability has been resolved:
net/packet: reset the MAC header on the packet-socket transmit path
packet_parse_headers() resets the MAC header only for a SOCK_RAW frame
whose socket did not bind a protocol. A protocol-bound SOCK_RAW socket,
any SOCK_DGRAM frame, and the legacy SOCK_PACKET path therefore leave
skb->mac_header unset here.
For frames sent via __dev_queue_xmit() this is harmless: it resets the
MAC header unconditionally. But the packet-socket PACKET_QDISC_BYPASS
path uses dev_direct_xmit(), which does not, so the frame reaches
ndo_start_xmit() with the MAC header unset. A driver that reads
eth_hdr(skb) on transmit then dereferences skb->head + (u16)~0, an
out-of-bounds access ~64 KiB past the head -- the same class fixed for
one consumer in commit f5089008f90c ("macsec: do not read an unset MAC
header in macsec_encrypt()").
packet_parse_headers() runs only on the transmit path, where skb->data
points at the start of the L2 header for every packet-socket type
regardless of its length: SOCK_RAW and SOCK_PACKET carry a user-supplied
header and SOCK_DGRAM has one built by dev_hard_header(). Reset the MAC
header unconditionally, mirroring __dev_queue_xmit(), so the frame is
anchored on the bypass path too.
Found by 0sec (https://0sec.ai) using automated source analysis;
verified against source and matched to the macsec KASAN report in
f5089008f90c. Compile-tested. |
| In the Linux kernel, the following vulnerability has been resolved:
vt: stabilize tty reference in kbd_keycode with tty_port_tty_get
kbd_keycode() reads vc->port.tty without acquiring a tty reference,
racing against con_shutdown() which clears port.tty under a different
lock. Use tty_port_tty_get()/tty_kref_put() to hold a proper reference
for the duration the tty pointer is needed. |
| In the Linux kernel, the following vulnerability has been resolved:
net: tap: set skb->dev before parsing virtio net header in tap_get_user_xdp()
The commit 4f61f133f354 ("net: tap: NULL pointer derefence in
dev_parse_header_protocol when skb->dev is null") fixed a crash in
tap_get_user() by assigning skb->dev before calling tun_vnet_hdr_to_skb().
This is required because virtio_net_hdr_to_skb() may invoke
dev_parse_header_protocol(), which dereferences skb->dev. Without the
assignment, a NULL pointer dereference can occur.
However, tap_get_user_xdp() still parses the virtio-net header before
assigning skb->dev. When the vhost TX path passes an XDP buffer containing
a GSO virtio-net header but the protocol is set to zero on purpose,
tun_vnet_hdr_to_skb() can reach dev_parse_header_protocol() while skb->dev
is still NULL, resulting in a crash.
Fix this by looking up the tap device and assigning skb->dev before calling
tun_vnet_hdr_to_skb(), matching the ordering already used in
tap_get_user(). Preserve the existing RCU read-side critical section across
dev_queue_xmit(). |
| In the Linux kernel, the following vulnerability has been resolved:
net/atm: fix slab-out-of-bounds read in vcc_setsockopt()
vcc_setsockopt() contained an ineffective optlen check:
if (__SO_LEVEL_MATCH(optname, level) && optlen != __SO_SIZE(optname))
return -EINVAL;
If __SO_LEVEL_MATCH(optname, level) evaluated to false (e.g. if the caller
passed a mismatched level), the length check optlen != __SO_SIZE(optname)
was short-circuited and bypassed. Execution then fell through to switch(optname),
calling copy_from_sockptr() assuming optval contained sufficient space.
Furthermore, even if level matched, a cgroup BPF setsockopt filter could shrink
optlen after entry. Because copy_from_sockptr() on kernel pointers uses memcpy(),
this leads to a KASAN slab-out-of-bounds read when optlen is smaller than the
expected structure size.
Fix this by using copy_safe_from_sockptr(), which unconditionally validates
that optlen is at least the expected size before copying. Also change the local
'value' variable type from 'unsigned long' to 'int' so that SO_SETCLP matches
its sizeof(int) ABI encoding on 64-bit systems. |
| In the Linux kernel, the following vulnerability has been resolved:
xsk: validate metadata when processing requests
The zero-copy path validates TX metadata while obtaining the descriptor
context, then reads it again later when preparing the hardware request.
User space can change the metadata between those operations and bypass the
original validation.
Validate the metadata in xsk_tx_metadata_request() and use the resulting
flags snapshot for every feature check. Read request fields once so all
zero-copy drivers process only values observed after successful
validation. |
| In the Linux kernel, the following vulnerability has been resolved:
xsk: require at least 16 bytes of TX metadata
AF_XDP accepts a TX metadata length as small as eight bytes, but every
supported request needs the flags plus at least one eight-byte request
field. Such short metadata also lets the kernel read beyond the registered
area.
Require 16 bytes rather than sizeof(struct xsk_tx_metadata) to preserve
compatibility with applications that do not use launch-time metadata. |
| Improper Authentication vulnerability in team-alembic AshAuthentication allows purpose-limited JWTs to be replayed as full bearer API credentials when a resource uses stateless bearer-token verification.
The bearer-token authentication helper AshAuthentication.Plug.Helpers.retrieve_from_bearer/3 verifies an Authorization: Bearer JWT's signature and rejects tokens containing an act claim, but performs no check that the token's purpose claim equals user at the bearer boundary. When the resource is configured with require_token_presence_for_authentication?: false (the DSL default), the follow-on validate_token/3 helper returns {:ok, nil} without consulting the token resource, so no downstream check on purpose takes place either. As a result, any valid, non-expired JWT the library itself issued for a narrow, single-purpose flow (most notably the purpose: sign_in token that WebAuthn always emits during sign-in, and that the Password strategy emits when sign-in tokens are enabled) is accepted directly as a general-purpose bearer credential and resolves to a full current_user assignment.
This bypasses the library's intended token-exchange contract, in which the sign_in token is meant to be presented exactly once to a preparation that validates the purpose claim and immediately revokes the token. The first use of a still-valid sign-in token presented directly in the Authorization header succeeds because the stateless bearer path never scopes it to purpose == "user".
An attacker who obtains a not-yet-exchanged sign-in token for a target subject (for example via log or referrer leakage, an intercepted magic-link delivery channel, or a partially compromised intermediary) can present it as a bearer token and be authenticated as that subject, fully bypassing the intended one-time-use and revocation semantics. Exploitation additionally requires that the host application wire up retrieve_from_bearer/3 on a reachable route and uses either WebAuthn (sign-in tokens are always issued) or the Password strategy with sign_in_tokens_enabled?: true. Resources configured with require_token_presence_for_authentication?: true (including applications scaffolded by the Igniter installer since v4.5.0) and the session-based path (authenticate_resource_from_session/4) enforce purpose == "user" against the stored token record and are not affected.
This issue affects ash_authentication: from 3.10.5 before 4.14.2 and from 5.0.0-rc.0 before 5.0.0-rc.13. |
| Improper Neutralization of Input During Web Page Generation (XSS) vulnerability in team-alembic AshAuthentication allows reflected cross-site scripting via the confirmation and magic link interaction forms.
When a strategy is configured with require_interaction? set to true, AshAuthentication serves an intermediate HTML page asking the user to confirm the action by submitting a form. Both such pages embed a request parameter directly into a hidden input's value attribute without HTML escaping: lib/ash_authentication/add_ons/confirmation/confirmation_form.html.eex interpolates the confirm parameter, and lib/ash_authentication/strategies/magic_link/sign_in_form.html.eex interpolates the magic link token parameter. These templates are compiled with EEx.function_from_file/3 using plain <%= %> expressions, which perform no escaping, so the parameter is reflected verbatim.
Neither accept handler validates the value before rendering it. AshAuthentication.AddOn.Confirmation.Plug.accept/2 only checks that a confirm key is present, and AshAuthentication.Strategy.MagicLink.Plug.accept/2 reads the parameter directly, so no token signature is verified at this stage and arbitrary attacker-supplied text reaches the template. An unauthenticated attacker can therefore craft a URL whose parameter terminates the attribute and injects markup, for example a quote followed by a <script> element. Because the accept phase is served over GET, loading the crafted link is sufficient; no form submission or prior authentication is required.
The injected script executes in the origin of the application embedding AshAuthentication, giving it access to that origin's cookies, session, and same-origin responses. Since these pages are part of the authentication flow, a victim following what appears to be a legitimate confirmation or sign-in link is a plausible target.
This issue affects ash_authentication: from 4.8.0 before 4.14.2 and from 5.0.0-rc.0 before 5.0.0-rc.13. |
