| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in the web-based GUI of Cisco Mobility Express 1800 Series Access Points could allow an unauthenticated, remote attacker to bypass authentication. The attacker could be granted full administrator privileges. The vulnerability is due to improper implementation of authentication for accessing certain web pages using the GUI interface. An attacker could exploit this vulnerability by sending a crafted HTTP request to the web interface of the affected system. A successful exploit could allow the attacker to bypass authentication and perform unauthorized configuration changes or issue control commands to the affected device. This vulnerability affects Cisco Mobility Express 1800 Series Access Points running a software version prior to 8.2.110.0. Cisco Bug IDs: CSCuy68219. |
| A vulnerability in the web management interface of Cisco Wireless LAN Controller (WLC) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to a missing internal handler for the specific request. An attacker could exploit this vulnerability by accessing a specific hidden URL on the GUI web management interface. A successful exploit could allow the attacker to cause a reload of the device, resulting in a DoS condition. This vulnerability affects only the Cisco Wireless LAN Controller 8.3.102.0 release. Cisco Bug IDs: CSCvb48198. |
| A privilege escalation vulnerability in the Secure Shell (SSH) subsystem in the StarOS operating system for Cisco ASR 5000 Series, ASR 5500 Series, ASR 5700 Series devices, and Cisco Virtualized Packet Core could allow an authenticated, remote attacker to gain unrestricted, root shell access. The vulnerability is due to missing input validation of parameters passed during SSH or SFTP login. An attacker could exploit this vulnerability by providing crafted user input to the SSH or SFTP command-line interface (CLI) during SSH or SFTP login. An exploit could allow an authenticated attacker to gain root privileges access on the router. Note: Only traffic directed to the affected system can be used to exploit this vulnerability. This vulnerability can be triggered via both IPv4 and IPv6 traffic. An established TCP connection toward port 22, the SSH default port, is needed to perform the attack. The attacker must have valid credentials to login to the system via SSH or SFTP. The following products have been confirmed to be vulnerable: Cisco ASR 5000/5500/5700 Series devices running StarOS after 17.7.0 and prior to 18.7.4, 19.5, and 20.2.3 with SSH configured are vulnerable. Cisco Virtualized Packet Core - Single Instance (VPC-SI) and Distributed Instance (VPC-DI) devices running StarOS prior to N4.2.7 (19.3.v7) and N4.7 (20.2.v0) with SSH configured are vulnerable. Cisco Bug IDs: CSCva65853. |
| An elevation of privilege vulnerability in MediaTek components, including the thermal driver and video driver, could enable a local malicious application to execute arbitrary code within the context of the kernel. This issue is rated as High because it first requires compromising a privileged process. Product: Android. Versions: N/A. Android ID: A-31749463. References: MT-ALPS02968886. |
| A vulnerability in the Start Before Logon (SBL) module of Cisco AnyConnect Secure Mobility Client Software for Windows could allow an unauthenticated, local attacker to open Internet Explorer with the privileges of the SYSTEM user. The vulnerability is due to insufficient implementation of the access controls. An attacker could exploit this vulnerability by opening the Internet Explorer browser. An exploit could allow the attacker to use Internet Explorer with the privileges of the SYSTEM user. This may allow the attacker to execute privileged commands on the targeted system. This vulnerability affects versions prior to released versions 4.4.00243 and later and 4.3.05017 and later. Cisco Bug IDs: CSCvc43976. |
| A vulnerability in the web-based GUI of Cisco UCS Director 6.0.0.0 and 6.0.0.1 could allow an authenticated, local attacker to execute arbitrary workflow items with just an end-user profile, a Privilege Escalation Vulnerability. The vulnerability is due to improper role-based access control (RBAC) after the Developer Menu is enabled in Cisco UCS Director. An attacker could exploit this vulnerability by enabling Developer Mode for his/her user profile with an end-user profile and then adding new catalogs with arbitrary workflow items to his/her profile. An exploit could allow an attacker to perform any actions defined by these workflow items, including actions affecting other tenants. Cisco Bug IDs: CSCvb64765. |
| Multiple versions of GitLab expose a dangerous method to any authenticated user that could lead to the deletion of all Issue and MergeRequest objects on a GitLab instance. For GitLab instances with publicly available projects this vulnerability could be exploited by an unauthenticated user. A fix was included in versions 8.14.3, 8.13.8, and 8.12.11, which were released on December 5th 2016 at 3:59 PST. The GitLab versions vulnerable to this are 8.13.0, 8.13.0-ee, 8.13.1, 8.13.1-ee, 8.13.2, 8.13.2-ee, 8.13.3, 8.13.3-ee, 8.13.4, 8.13.4-ee, 8.13.5, 8.13.5-ee, 8.13.6, 8.13.6-ee, 8.13.7, 8.14.0, 8.14.0-ee, 8.14.1, 8.14.2, and 8.14.2-ee. |
| newreply.php in MyBB (aka MyBulletinBoard) before 1.8.7 and MyBB Merge System before 1.8.7 allows remote attackers to have unspecified impact by leveraging a missing permission check. |
| The x86 emulator in Xen does not properly treat x86 NULL segments as unusable when accessing memory, which might allow local HVM guest users to gain privileges via vectors involving "unexpected" base/limit values. |
| Xen 4.0.x through 4.7.x mishandle x86 task switches to VM86 mode, which allows local 32-bit x86 HVM guest OS users to gain privileges or cause a denial of service (guest OS crash) by leveraging a guest operating system that uses hardware task switching and allows a new task to start in VM86 mode. |
| An elevation of privilege vulnerability in the Qualcomm video driver could enable a local malicious application to execute arbitrary code within the context of the kernel. This issue is rated as Critical due to the possibility of a local permanent device compromise, which may require reflashing the operating system to repair the device. Product: Android. Versions: Kernel-3.18. Android ID: A-32450261. References: QC-CR#1007860. |
| Ebuild in Gentoo may change directory and file permissions depending on the order of installed packages, which allows local users to read or write to restricted directories or execute restricted commands via navigating to the affected directories, or executing the affected commands. |
| An elevation of privilege vulnerability in the MediaTek driver could enable a local malicious application to execute arbitrary code within the context of the kernel. This issue is rated as Critical due to the possibility of a local permanent device compromise, which may require reflashing the operating system to repair the device. Product: Android. Versions: N/A. Android ID: A-31750190. References: MT-ALPS02974192. |
| Liferay Portal through 6.2.10 allows remote authenticated users to execute arbitrary shell commands via a crafted Velocity template. |
| usb-creator before 0.2.38.3ubuntu0.1 on Ubuntu 12.04 LTS, before 0.2.56.3ubuntu0.1 on Ubuntu 14.04 LTS, before 0.2.62ubuntu0.3 on Ubuntu 14.10, and before 0.2.67ubuntu0.1 on Ubuntu 15.04 allows local users to gain privileges by leveraging a missing call check_polkit for the KVMTest method. |
| A vulnerability in the remote management access control list (ACL) feature of the Cisco CVR100W Wireless-N VPN Router could allow an unauthenticated, remote attacker to bypass the remote management ACL. The vulnerability is due to incorrect implementation of the ACL decision made during the ingress connection request to the remote management interface. An attacker could exploit this vulnerability by sending a connection to the management IP address or domain name of the targeted device. A successful exploit could allow the attacker to bypass the configured remote management ACL. This can occur when the Remote Management configuration parameter is set to Disabled. This vulnerability affects Cisco CVR100W Wireless-N VPN Routers running a firmware image prior to 1.0.1.24. Cisco Bug IDs: CSCvc14457. |
| A vulnerability in Cisco WebEx Meeting Server could allow an unauthenticated, remote attacker to modify the welcome message of a meeting on an affected system. The vulnerability is due to insufficient security settings on meetings. An attacker could exploit this vulnerability by modifying the welcome message to a meeting. A successful exploit could allow the attacker to modify the welcome message of any known meeting. Cisco Bug IDs: CSCvf68695. |
| A vulnerability in the guest shell feature of Cisco NX-OS System Software could allow an authenticated, local attacker to read and send packets outside the scope of the guest shell container. An attacker would need valid administrator credentials to perform this attack. The vulnerability is due to insufficient internal security measures in the guest shell feature. An attacker could exploit this vulnerability by sending or receiving packets on the device-internal network outside of the guest shell container, aka "Unauthorized Internal Interface Access." This vulnerability affects the following products running Cisco NX-OS System Software: Nexus 3000 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules. Cisco Bug IDs: CSCvf33038. |
| A vulnerability in the Open Agent Container (OAC) feature of Cisco Nexus Series Switches could allow an unauthenticated, local attacker to read and send packets outside the scope of the OAC. The vulnerability is due to insufficient internal security measures in the OAC feature. An attacker could exploit this vulnerability by crafting specific packets for communication on the device-internal network. A successful exploit could allow the attacker to run code on the underlying host operating system. OAC is not enabled by default. For a device to be vulnerable, an administrator would need to install and activate this feature. This vulnerability affects the following Cisco Nexus Series Switches: Nexus 2000 Series Fabric Extenders, Nexus 5000 Series Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches. Cisco Bug IDs: CSCve53542, CSCvf36621. |
| EMC Isilon OneFS 7.2.1.0 - 7.2.1.3, EMC Isilon OneFS 7.2.0.x, EMC Isilon OneFS 7.1.1.0 - 7.1.1.10, EMC Isilon OneFS 7.1.0.x is affected by a privilege escalation vulnerability that could potentially be exploited by attackers to compromise the affected system. |
