| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Mercusys AC12G (EU) V1 with firmware AC12G(EU)_V1_200909 transmits DDNS credentials over plaintext HTTP with only Base64 encoding. The firmware contains no TLS implementation, allowing man-in-the-middle interception of DDNS service credentials. |
| A vulnerability was identified in NousResearch hermes-agent up to 0.12.0. Affected by this vulnerability is the function _compress_context of the file run_agent.py. The manipulation leads to injection. It is possible to initiate the attack remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| Mercusys AC12G (EU) V1 router with firmware AC12G(EU)_V1_200909 allows UPnP AddPortMapping to forward external ports to the router's own admin interface by accepting its own IP (192.168.1.1) or localhost (127.0.0.1) as InternalClient. An unauthenticated LAN attacker can expose the admin panel to the internet with a single SOAP request. |
| OpenTelemetry eBPF Instrumentation provides eBPF instrumentation based on the OpenTelemetry standard. Prior to version 0.9.0, OBI's replacement ELF parser trusts section offsets, counts, and string offsets from the executable file. A crafted local ELF can make OBI dereference invalid section pointers or slice past string tables, causing the agent to panic while determining the process language. This issue has been patched in version 0.9.0. |
| A vulnerability in the web-based user interface of Cisco Webex Meetings could have allowed an unauthenticated, remote attacker to conduct a cross-site scripting (XSS) attack. Cisco has addressed this vulnerability in the Webex Meetings service, and no customer action is needed.
This vulnerability existed because of insufficient validation of user input. Prior to this vulnerability being addressed, an attacker could have exploited this vulnerability by persuading a user to follow a malicious link. A successful exploit could have allowed the attacker to execute arbitrary script code in the browser of the targeted user or access sensitive, browser-based information. |
| A flaw has been found in DevaslanPHP project-management up to 2.0.0-beta1. Affected by this vulnerability is the function editComment/doDeleteComment of the file app/Filament/Resources/TicketResource/Pages/ViewTicket.php of the component Livewire Handler. Executing a manipulation can lead to improper authorization. The attack can be executed remotely. The project was informed of the problem early through an issue report but has not responded yet. |
| Missing input validation in the rfapiRibBi2Ri() function (rfapi_rib.c) of FRRouting (FRR) stable/10.0 to stable/10.6 allows attackers to cause a Denial of Service (DoS) via supplying a crafted BGP UPDATE message. |
| daphne before 4.2.2 did not pass maxFramePayloadSize or maxMessagePayloadSize to Autobahn's WebSocketServerFactory. Because Autobahn defaults both values to 0 (unlimited), an unauthenticated remote attacker could send arbitrarily large WebSocket messages or frames, causing excessive memory consumption and a denial of service. |
| An inclusion of functionality from untrusted control sphere vulnerability in MinGW DLL component in Synology Hyper Backup Explorer before 3.0.1-0156 allows local users to execute arbitrary code via unspecified vectors. |
| ProjectsAndPrograms school-management-system is vulnerable to Stored Cross‑Site Scripting (XSS) in multiple attributes of students and teachers objects. An authorized attacker (e.g., a teacher or administrator) can inject malicious JavaScript that is subsequently executed in other users’ browsers.
Critically, when chained with CVE‑2025‑11661, which allows unauthenticated access to backend endpoints, this vulnerability can be exploited by a remote attacker without privileges to inject and execute arbitrary JavaScript.
The maintainers were notified early about this vulnerability but did not provide details regarding affected versions. The version corresponding to commit 6b6fae5 was tested and confirmed vulnerable; other versions were not tested and may also be affected. |
| An issue was discovered in Django 5.2 before 5.2.15 and 6.0 before 6.0.6.
`django.middleware.cache.UpdateCacheMiddleware` in Django does not match `Cache-Control` response directives case-insensitively, which allows remote attackers to read responses that were incorrectly cached because their `Cache-Control` directives used uppercase or mixed-case values.
Earlier, unsupported Django series (such as 5.0.x, 4.1.x, and 3.2.x) were not evaluated and may also be affected.
Django would like to thank Ahmed Badawe for reporting this issue. |
| React Router is a router for React. In versions 7.0.0 through 7.14.0 and 6.7.0 through 6.30.3, certain URLs passed to the redirect function can trigger an open redirect to an external domain due to path values starting with // being reinterpreted as protocol-relative URLs. The level of impact depends on the validation done by the application prior to returning the redirect. This does not impact applications using Declarative Mode (<BrowserRouter>). This is patched in versions 7.14.1 and 6.30.4. |
| A vulnerability was found in SourceCodester Customer Review App 1.0. Affected by this vulnerability is the function add_review/save_review/get_all_reviews of the file review_app.py. Performing a manipulation of the argument name/comment results in denial of service. The attack requires a local approach. The exploit has been made public and could be used. |
| In the Linux kernel, the following vulnerability has been resolved:
coresight: tmc-etr: Fix race condition between sysfs and perf mode
When trying to run perf and sysfs mode simultaneously, the WARN_ON()
in tmc_etr_enable_hw() is triggered sometimes:
WARNING: CPU: 42 PID: 3911571 at drivers/hwtracing/coresight/coresight-tmc-etr.c:1060 tmc_etr_enable_hw+0xc0/0xd8 [coresight_tmc]
[..snip..]
Call trace:
tmc_etr_enable_hw+0xc0/0xd8 [coresight_tmc] (P)
tmc_enable_etr_sink+0x11c/0x250 [coresight_tmc] (L)
tmc_enable_etr_sink+0x11c/0x250 [coresight_tmc]
coresight_enable_path+0x1c8/0x218 [coresight]
coresight_enable_sysfs+0xa4/0x228 [coresight]
enable_source_store+0x58/0xa8 [coresight]
dev_attr_store+0x20/0x40
sysfs_kf_write+0x4c/0x68
kernfs_fop_write_iter+0x120/0x1b8
vfs_write+0x2c8/0x388
ksys_write+0x74/0x108
__arm64_sys_write+0x24/0x38
el0_svc_common.constprop.0+0x64/0x148
do_el0_svc+0x24/0x38
el0_svc+0x3c/0x130
el0t_64_sync_handler+0xc8/0xd0
el0t_64_sync+0x1ac/0x1b0
---[ end trace 0000000000000000 ]---
Since the enablement of sysfs mode is separeted into two critical regions,
one for sysfs buffer allocation and another for hardware enablement, it's
possible to race with the perf mode. Fix this by double check whether
the perf mode's been used before enabling the hardware in sysfs mode.
mode:
[sysfs mode] [perf mode]
tmc_etr_get_sysfs_buffer()
spin_lock(&drvdata->spinlock)
[sysfs buffer allocation]
spin_unlock(&drvdata->spinlock)
spin_lock(&drvdata->spinlock)
tmc_etr_enable_hw()
drvdata->etr_buf = etr_perf->etr_buf
spin_unlock(&drvdata->spinlock)
spin_lock(&drvdata->spinlock)
tmc_etr_enable_hw()
WARN_ON(drvdata->etr_buf) // WARN sicne etr_buf initialized at
the perf side
spin_unlock(&drvdata->spinlock)
With this fix, we retain the check for CS_MODE_PERF in get_etr_sysfs_buf.
This ensures we verify whether the perf mode's already running before we
actually allocate the buffer. Then we can save the time of
allocating/freeing the sysfs buffer if race with the perf mode. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: do WoW offloads only on primary link
In case of multi-link connection, WCN7850 firmware crashes due to WoW
offloads enabled on both primary and secondary links.
Change to do it only on primary link to fix it.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1 |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: rt9455: Fix use-after-free in power_supply_changed()
Using the `devm_` variant for requesting IRQ _before_ the `devm_`
variant for allocating/registering the `power_supply` handle, means that
the `power_supply` handle will be deallocated/unregistered _before_ the
interrupt handler (since `devm_` naturally deallocates in reverse
allocation order). This means that during removal, there is a race
condition where an interrupt can fire just _after_ the `power_supply`
handle has been freed, *but* just _before_ the corresponding
unregistration of the IRQ handler has run.
This will lead to the IRQ handler calling `power_supply_changed()` with
a freed `power_supply` handle. Which usually crashes the system or
otherwise silently corrupts the memory...
Note that there is a similar situation which can also happen during
`probe()`; the possibility of an interrupt firing _before_ registering
the `power_supply` handle. This would then lead to the nasty situation
of using the `power_supply` handle *uninitialized* in
`power_supply_changed()`.
Fix this racy use-after-free by making sure the IRQ is requested _after_
the registration of the `power_supply` handle. |
| In the Linux kernel, the following vulnerability has been resolved:
pinctrl: canaan: k230: Fix NULL pointer dereference when parsing devicetree
When probing the k230 pinctrl driver, the kernel triggers a NULL pointer
dereference. The crash trace showed:
[ 0.732084] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000068
[ 0.740737] ...
[ 0.776296] epc : k230_pinctrl_probe+0x1be/0x4fc
In k230_pinctrl_parse_functions(), we attempt to retrieve the device
pointer via info->pctl_dev->dev, but info->pctl_dev is only initialized
after k230_pinctrl_parse_dt() completes.
At the time of DT parsing, info->pctl_dev is still NULL, leading to
the invalid dereference of info->pctl_dev->dev.
Use the already available device pointer from platform_device
instead of accessing through uninitialized pctl_dev. |
| An inclusion of functionality from untrusted control sphere vulnerability in OpenSSL configuration in Synology Active Backup for Business Recovery Media Creator before 2.5.0-2081 allows local users to execute arbitrary code via unspecified vectors. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI/P2PDMA: Fix p2pmem_alloc_mmap() warning condition
Commit b7e282378773 has already changed the initial page refcount of
p2pdma page from one to zero, however, in p2pmem_alloc_mmap() it uses
"VM_WARN_ON_ONCE_PAGE(!page_ref_count(page))" to assert the initial page
refcount should not be zero and the following will be reported when
CONFIG_DEBUG_VM is enabled:
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x380400000
flags: 0x20000000002000(reserved|node=0|zone=4)
raw: 0020000000002000 ff1100015e3ab440 0000000000000000 0000000000000000
raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: VM_WARN_ON_ONCE_PAGE(!page_ref_count(page))
------------[ cut here ]------------
WARNING: CPU: 5 PID: 449 at drivers/pci/p2pdma.c:240 p2pmem_alloc_mmap+0x83a/0xa60
Fix by using "page_ref_count(page)" as the assertion condition. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: hci: shdlc: Stop timers and work before freeing context
llc_shdlc_deinit() purges SHDLC skb queues and frees the llc_shdlc
structure while its timers and state machine work may still be active.
Timer callbacks can schedule sm_work, and sm_work accesses SHDLC state
and the skb queues. If teardown happens in parallel with a queued/running
work item, it can lead to UAF and other shutdown races.
Stop all SHDLC timers and cancel sm_work synchronously before purging the
queues and freeing the context.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
