| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Rsync version 3.4.2 and prior contain symlink race condition vulnerabilities in path-based system calls including chmod, lchown, utimes, rename, unlink, mkdir, symlink, mknod, link, rmdir, and lstat that allow local attackers to redirect operations to files outside the exported rsync module. Attackers with local filesystem access can exploit the timing window between path resolution and syscall execution by swapping symlinks to apply sender-supplied permissions, ownership, timestamps, or filenames to arbitrary files outside the intended module boundary on rsync daemons configured with 'use chroot = no'. |
| In the Linux kernel, the following vulnerability has been resolved:
cgroup: fix race between task migration and iteration
When a task is migrated out of a css_set, cgroup_migrate_add_task()
first moves it from cset->tasks to cset->mg_tasks via:
list_move_tail(&task->cg_list, &cset->mg_tasks);
If a css_task_iter currently has it->task_pos pointing to this task,
css_set_move_task() calls css_task_iter_skip() to keep the iterator
valid. However, since the task has already been moved to ->mg_tasks,
the iterator is advanced relative to the mg_tasks list instead of the
original tasks list. As a result, remaining tasks on cset->tasks, as
well as tasks queued on cset->mg_tasks, can be skipped by iteration.
Fix this by calling css_set_skip_task_iters() before unlinking
task->cg_list from cset->tasks. This advances all active iterators to
the next task on cset->tasks, so iteration continues correctly even
when a task is concurrently being migrated.
This race is hard to hit in practice without instrumentation, but it
can be reproduced by artificially slowing down cgroup_procs_show().
For example, on an Android device a temporary
/sys/kernel/cgroup/cgroup_test knob can be added to inject a delay
into cgroup_procs_show(), and then:
1) Spawn three long-running tasks (PIDs 101, 102, 103).
2) Create a test cgroup and move the tasks into it.
3) Enable a large delay via /sys/kernel/cgroup/cgroup_test.
4) In one shell, read cgroup.procs from the test cgroup.
5) Within the delay window, in another shell migrate PID 102 by
writing it to a different cgroup.procs file.
Under this setup, cgroup.procs can intermittently show only PID 101
while skipping PID 103. Once the migration completes, reading the
file again shows all tasks as expected.
Note that this change does not allow removing the existing
css_set_skip_task_iters() call in css_set_move_task(). The new call
in cgroup_migrate_add_task() only handles iterators that are racing
with migration while the task is still on cset->tasks. Iterators may
also start after the task has been moved to cset->mg_tasks. If we
dropped css_set_skip_task_iters() from css_set_move_task(), such
iterators could keep task_pos pointing to a migrating task, causing
css_task_iter_advance() to malfunction on the destination css_set,
up to and including crashes or infinite loops.
The race window between migration and iteration is very small, and
css_task_iter is not on a hot path. In the worst case, when an
iterator is positioned on the first thread of the migrating process,
cgroup_migrate_add_task() may have to skip multiple tasks via
css_set_skip_task_iters(). However, this only happens when migration
and iteration actually race, so the performance impact is negligible
compared to the correctness fix provided here. |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: fix divide-by-zero in tipc_sk_filter_connect()
A user can set conn_timeout to any value via
setsockopt(TIPC_CONN_TIMEOUT), including values less than 4. When a
SYN is rejected with TIPC_ERR_OVERLOAD and the retry path in
tipc_sk_filter_connect() executes:
delay %= (tsk->conn_timeout / 4);
If conn_timeout is in the range [0, 3], the integer division yields 0,
and the modulo operation triggers a divide-by-zero exception, causing a
kernel oops/panic.
Fix this by clamping conn_timeout to a minimum of 4 at the point of use
in tipc_sk_filter_connect().
Oops: divide error: 0000 [#1] SMP KASAN NOPTI
CPU: 0 UID: 0 PID: 119 Comm: poc-F144 Not tainted 7.0.0-rc2+
RIP: 0010:tipc_sk_filter_rcv (net/tipc/socket.c:2236 net/tipc/socket.c:2362)
Call Trace:
tipc_sk_backlog_rcv (include/linux/instrumented.h:82 include/linux/atomic/atomic-instrumented.h:32 include/net/sock.h:2357 net/tipc/socket.c:2406)
__release_sock (include/net/sock.h:1185 net/core/sock.c:3213)
release_sock (net/core/sock.c:3797)
tipc_connect (net/tipc/socket.c:2570)
__sys_connect (include/linux/file.h:62 include/linux/file.h:83 net/socket.c:2098) |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: ufs: core: Fix SError in ufshcd_rtc_work() during UFS suspend
In __ufshcd_wl_suspend(), cancel_delayed_work_sync() is called to cancel
the UFS RTC work, but it is placed after ufshcd_vops_suspend(hba, pm_op,
POST_CHANGE). This creates a race condition where ufshcd_rtc_work() can
still be running while ufshcd_vops_suspend() is executing. When
UFSHCD_CAP_CLK_GATING is not supported, the condition
!hba->clk_gating.active_reqs is always true, causing ufshcd_update_rtc()
to be executed. Since ufshcd_vops_suspend() typically performs clock
gating operations, executing ufshcd_update_rtc() at that moment triggers
an SError. The kernel panic trace is as follows:
Kernel panic - not syncing: Asynchronous SError Interrupt
Call trace:
dump_backtrace+0xec/0x128
show_stack+0x18/0x28
dump_stack_lvl+0x40/0xa0
dump_stack+0x18/0x24
panic+0x148/0x374
nmi_panic+0x3c/0x8c
arm64_serror_panic+0x64/0x8c
do_serror+0xc4/0xc8
el1h_64_error_handler+0x34/0x4c
el1h_64_error+0x68/0x6c
el1_interrupt+0x20/0x58
el1h_64_irq_handler+0x18/0x24
el1h_64_irq+0x68/0x6c
ktime_get+0xc4/0x12c
ufshcd_mcq_sq_stop+0x4c/0xec
ufshcd_mcq_sq_cleanup+0x64/0x1dc
ufshcd_clear_cmd+0x38/0x134
ufshcd_issue_dev_cmd+0x298/0x4d0
ufshcd_exec_dev_cmd+0x1a4/0x1c4
ufshcd_query_attr+0xbc/0x19c
ufshcd_rtc_work+0x10c/0x1c8
process_scheduled_works+0x1c4/0x45c
worker_thread+0x32c/0x3e8
kthread+0x120/0x1d8
ret_from_fork+0x10/0x20
Fix this by moving cancel_delayed_work_sync() before the call to
ufshcd_vops_suspend(hba, pm_op, PRE_CHANGE), ensuring the UFS RTC work is
fully completed or cancelled at that point. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Fix runtime suspend deadlock when there is pending job
The runtime suspend callback drains the running job workqueue before
suspending the device. If a job is still executing and calls
pm_runtime_resume_and_get(), it can deadlock with the runtime suspend
path.
Fix this by moving pm_runtime_resume_and_get() from the job execution
routine to the job submission routine, ensuring the device is resumed
before the job is queued and avoiding the deadlock during runtime
suspend. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-pci: Fix race bug in nvme_poll_irqdisable()
In the following scenario, pdev can be disabled between (1) and (3) by
(2). This sets pdev->msix_enabled = 0. Then, pci_irq_vector() will
return MSI-X IRQ(>15) for (1) whereas return INTx IRQ(<=15) for (2).
This causes IRQ warning because it tries to enable INTx IRQ that has
never been disabled before.
To fix this, save IRQ number into a local variable and ensure
disable_irq() and enable_irq() operate on the same IRQ number. Even if
pci_free_irq_vectors() frees the IRQ concurrently, disable_irq() and
enable_irq() on a stale IRQ number is still valid and safe, and the
depth accounting reamins balanced.
task 1:
nvme_poll_irqdisable()
disable_irq(pci_irq_vector(pdev, nvmeq->cq_vector)) ...(1)
enable_irq(pci_irq_vector(pdev, nvmeq->cq_vector)) ...(3)
task 2:
nvme_reset_work()
nvme_dev_disable()
pdev->msix_enable = 0; ...(2)
crash log:
------------[ cut here ]------------
Unbalanced enable for IRQ 10
WARNING: kernel/irq/manage.c:753 at __enable_irq+0x102/0x190 kernel/irq/manage.c:753, CPU#1: kworker/1:0H/26
Modules linked in:
CPU: 1 UID: 0 PID: 26 Comm: kworker/1:0H Not tainted 6.19.0-dirty #9 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
Workqueue: kblockd blk_mq_timeout_work
RIP: 0010:__enable_irq+0x107/0x190 kernel/irq/manage.c:753
Code: ff df 48 89 fa 48 c1 ea 03 0f b6 14 02 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 04 84 d2 75 79 48 8d 3d 2e 7a 3f 05 41 8b 74 24 2c <67> 48 0f b9 3a e8 ef b9 21 00 5b 41 5c 5d e9 46 54 66 03 e8 e1 b9
RSP: 0018:ffffc900001bf550 EFLAGS: 00010046
RAX: 0000000000000007 RBX: 0000000000000000 RCX: ffffffffb20c0e90
RDX: 0000000000000000 RSI: 000000000000000a RDI: ffffffffb74b88f0
RBP: ffffc900001bf560 R08: ffff88800197cf00 R09: 0000000000000001
R10: 0000000000000003 R11: 0000000000000003 R12: ffff8880012a6000
R13: 1ffff92000037eae R14: 000000000000000a R15: 0000000000000293
FS: 0000000000000000(0000) GS:ffff8880b49f7000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000555da4a25fa8 CR3: 00000000208e8000 CR4: 00000000000006f0
Call Trace:
<TASK>
enable_irq+0x121/0x1e0 kernel/irq/manage.c:797
nvme_poll_irqdisable+0x162/0x1c0 drivers/nvme/host/pci.c:1494
nvme_timeout+0x965/0x14b0 drivers/nvme/host/pci.c:1744
blk_mq_rq_timed_out block/blk-mq.c:1653 [inline]
blk_mq_handle_expired+0x227/0x2d0 block/blk-mq.c:1721
bt_iter+0x2fc/0x3a0 block/blk-mq-tag.c:292
__sbitmap_for_each_set include/linux/sbitmap.h:269 [inline]
sbitmap_for_each_set include/linux/sbitmap.h:290 [inline]
bt_for_each block/blk-mq-tag.c:324 [inline]
blk_mq_queue_tag_busy_iter+0x969/0x1e80 block/blk-mq-tag.c:536
blk_mq_timeout_work+0x627/0x870 block/blk-mq.c:1763
process_one_work+0x956/0x1aa0 kernel/workqueue.c:3257
process_scheduled_works kernel/workqueue.c:3340 [inline]
worker_thread+0x65c/0xe60 kernel/workqueue.c:3421
kthread+0x41a/0x930 kernel/kthread.c:463
ret_from_fork+0x6f8/0x8c0 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:246
</TASK>
irq event stamp: 74478
hardirqs last enabled at (74477): [<ffffffffb5720a9c>] __raw_spin_unlock_irq include/linux/spinlock_api_smp.h:159 [inline]
hardirqs last enabled at (74477): [<ffffffffb5720a9c>] _raw_spin_unlock_irq+0x2c/0x60 kernel/locking/spinlock.c:202
hardirqs last disabled at (74478): [<ffffffffb57207b5>] __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:108 [inline]
hardirqs last disabled at (74478): [<ffffffffb57207b5>] _raw_spin_lock_irqsave+0x85/0xa0 kernel/locking/spinlock.c:162
softirqs last enabled at (74304): [<ffffffffb1e9466c>] __do_softirq kernel/softirq.c:656 [inline]
softirqs last enabled at (74304): [<ffffffffb1e9466c>] invoke_softirq kernel/softirq.c:496 [inline]
softirqs last enabled at (74304): [<ffffffffb1e9466c>] __irq_exit_rcu+0xdc/0x120
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: soc-core: flush delayed work before removing DAIs and widgets
When a sound card is unbound while a PCM stream is open, a
use-after-free can occur in snd_soc_dapm_stream_event(), called from
the close_delayed_work workqueue handler.
During unbind, snd_soc_unbind_card() flushes delayed work and then
calls soc_cleanup_card_resources(). Inside cleanup,
snd_card_disconnect_sync() releases all PCM file descriptors, and
the resulting PCM close path can call snd_soc_dapm_stream_stop()
which schedules new delayed work with a pmdown_time timer delay.
Since this happens after the flush in snd_soc_unbind_card(), the
new work is not caught. soc_remove_link_components() then frees
DAPM widgets before this work fires, leading to the use-after-free.
The existing flush in soc_free_pcm_runtime() also cannot help as it
runs after soc_remove_link_components() has already freed the widgets.
Add a flush in soc_cleanup_card_resources() after
snd_card_disconnect_sync() (after which no new PCM closes can
schedule further delayed work) and before soc_remove_link_dais()
and soc_remove_link_components() (which tear down the structures the
delayed work accesses). |
| Use after free in DOM in Google Chrome on prior to 148.0.7778.179 allowed a remote attacker to execute arbitrary code inside a sandbox via a crafted HTML page. (Chromium security severity: Medium) |
| Undefined behavior may result due to a race condition leading to a use-after-free violation. If BIND receives an incoming DNS message signed with SIG(0), it begins work to validate that signature. If, during that validation, the "recursive-clients" limit is reached (as would occur during a query flood), and that same DNS message is discarded per the limit, there is a brief window of time while the SIG(0) validation may attempt to read the now-discarded DNS message.
This issue affects BIND 9 versions 9.20.0 through 9.20.22, 9.21.0 through 9.21.21, and 9.20.9-S1 through 9.20.22-S1.
BIND 9 versions 9.18.28 through 9.18.49 and 9.18.28-S1 through 9.18.49-S1 are NOT affected. |
| In the Linux kernel, the following vulnerability has been resolved:
nfs: return EISDIR on nfs3_proc_create if d_alias is a dir
If we found an alias through nfs3_do_create/nfs_add_or_obtain
/d_splice_alias which happens to be a dir dentry, we don't return
any error, and simply forget about this alias, but the original
dentry we were adding and passed as parameter remains negative.
This later causes an oops on nfs_atomic_open_v23/finish_open since we
supply a negative dentry to do_dentry_open.
This has been observed running lustre-racer, where dirs and files are
created/removed concurrently with the same name and O_EXCL is not
used to open files (frequent file redirection).
While d_splice_alias typically returns a directory alias or NULL, we
explicitly check d_is_dir() to ensure that we don't attempt to perform
file operations (like finish_open) on a directory inode, which triggers
the observed oops. |
| A time-of-check time-of-use (TOCTOU) condition in the ad_flush function in Netatalk 3.0.0 through 4.4.2 involves root-privileged file operations, which may allow a remote attacker to cause limited data modification under specific race conditions. |
| A race condition in the privilege toggle mechanism in Netatalk 2.2.5 through 4.4.2 allows a local attacker to obtain limited information, modify limited data, or cause a minor service disruption. |
| NLnet Labs Unbound 1.14.0 up to and including version 1.25.0 has a locking inconsistency vulnerability that when certain conditions are met (multi-threaded, RPZ XFR reload, RPZ zone with 'rpz-nsip'/'rpz-nsdname' triggers) it could result in heap use-after-free and eventual crash. An adversary can exploit the vulnerability if conditions are first met on a vulnerable Unbound, i.e., multi-threaded, an RPZ zone with 'rpz-nsip'/'rpz-nsdname' triggers and an ongoing XFR for that RPZ zone. Local RPZ files do not trigger the vulnerability. If the timing is right and an XFR happens at the same time another thread needs to read that RPZ zone, the reader may not hold the lock long enough and the thread applying the XFR may free objects that the reader is about to walk causing the use-after-free. Unbound 1.25.1 contains a patch with a fix to the locking code. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: teql: Fix double-free in teql_master_xmit
Whenever a TEQL devices has a lockless Qdisc as root, qdisc_reset should
be called using the seq_lock to avoid racing with the datapath. Failure
to do so may cause crashes like the following:
[ 238.028993][ T318] BUG: KASAN: double-free in skb_release_data (net/core/skbuff.c:1139)
[ 238.029328][ T318] Free of addr ffff88810c67ec00 by task poc_teql_uaf_ke/318
[ 238.029749][ T318]
[ 238.029900][ T318] CPU: 3 UID: 0 PID: 318 Comm: poc_teql_ke Not tainted 7.0.0-rc3-00149-ge5b31d988a41 #704 PREEMPT(full)
[ 238.029906][ T318] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[ 238.029910][ T318] Call Trace:
[ 238.029913][ T318] <TASK>
[ 238.029916][ T318] dump_stack_lvl (lib/dump_stack.c:122)
[ 238.029928][ T318] print_report (mm/kasan/report.c:379 mm/kasan/report.c:482)
[ 238.029940][ T318] ? skb_release_data (net/core/skbuff.c:1139)
[ 238.029944][ T318] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
...
[ 238.029957][ T318] ? skb_release_data (net/core/skbuff.c:1139)
[ 238.029969][ T318] kasan_report_invalid_free (mm/kasan/report.c:221 mm/kasan/report.c:563)
[ 238.029979][ T318] ? skb_release_data (net/core/skbuff.c:1139)
[ 238.029989][ T318] check_slab_allocation (mm/kasan/common.c:231)
[ 238.029995][ T318] kmem_cache_free (mm/slub.c:2637 (discriminator 1) mm/slub.c:6168 (discriminator 1) mm/slub.c:6298 (discriminator 1))
[ 238.030004][ T318] skb_release_data (net/core/skbuff.c:1139)
...
[ 238.030025][ T318] sk_skb_reason_drop (net/core/skbuff.c:1256)
[ 238.030032][ T318] pfifo_fast_reset (./include/linux/ptr_ring.h:171 ./include/linux/ptr_ring.h:309 ./include/linux/skb_array.h:98 net/sched/sch_generic.c:827)
[ 238.030039][ T318] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
...
[ 238.030054][ T318] qdisc_reset (net/sched/sch_generic.c:1034)
[ 238.030062][ T318] teql_destroy (./include/linux/spinlock.h:395 net/sched/sch_teql.c:157)
[ 238.030071][ T318] __qdisc_destroy (./include/net/pkt_sched.h:328 net/sched/sch_generic.c:1077)
[ 238.030077][ T318] qdisc_graft (net/sched/sch_api.c:1062 net/sched/sch_api.c:1053 net/sched/sch_api.c:1159)
[ 238.030089][ T318] ? __pfx_qdisc_graft (net/sched/sch_api.c:1091)
[ 238.030095][ T318] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 238.030102][ T318] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 238.030106][ T318] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 238.030114][ T318] tc_get_qdisc (net/sched/sch_api.c:1529 net/sched/sch_api.c:1556)
...
[ 238.072958][ T318] Allocated by task 303 on cpu 5 at 238.026275s:
[ 238.073392][ T318] kasan_save_stack (mm/kasan/common.c:58)
[ 238.073884][ T318] kasan_save_track (mm/kasan/common.c:64 (discriminator 5) mm/kasan/common.c:79 (discriminator 5))
[ 238.074230][ T318] __kasan_slab_alloc (mm/kasan/common.c:369)
[ 238.074578][ T318] kmem_cache_alloc_node_noprof (./include/linux/kasan.h:253 mm/slub.c:4542 mm/slub.c:4869 mm/slub.c:4921)
[ 238.076091][ T318] kmalloc_reserve (net/core/skbuff.c:616 (discriminator 107))
[ 238.076450][ T318] __alloc_skb (net/core/skbuff.c:713)
[ 238.076834][ T318] alloc_skb_with_frags (./include/linux/skbuff.h:1383 net/core/skbuff.c:6763)
[ 238.077178][ T318] sock_alloc_send_pskb (net/core/sock.c:2997)
[ 238.077520][ T318] packet_sendmsg (net/packet/af_packet.c:2926 net/packet/af_packet.c:3019 net/packet/af_packet.c:3108)
[ 238.081469][ T318]
[ 238.081870][ T318] Freed by task 299 on cpu 1 at 238.028496s:
[ 238.082761][ T318] kasan_save_stack (mm/kasan/common.c:58)
[ 238.083481][ T318] kasan_save_track (mm/kasan/common.c:64 (discriminator 5) mm/kasan/common.c:79 (discriminator 5))
[ 238.085348][ T318] kasan_save_free_info (mm/kasan/generic.c:587 (discriminator 1))
[ 238.085900][ T318] __kasan_slab_free (mm/
---truncated--- |
| Use after free in Windows Cloud Files Mini Filter Driver allows an authorized attacker to elevate privileges locally. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nfnetlink_queue: make hash table per queue
Sharing a global hash table among all queues is tempting, but
it can cause crash:
BUG: KASAN: slab-use-after-free in nfqnl_recv_verdict+0x11ac/0x15e0 [nfnetlink_queue]
[..]
nfqnl_recv_verdict+0x11ac/0x15e0 [nfnetlink_queue]
nfnetlink_rcv_msg+0x46a/0x930
kmem_cache_alloc_node_noprof+0x11e/0x450
struct nf_queue_entry is freed via kfree, but parallel cpu can still
encounter such an nf_queue_entry when walking the list.
Alternative fix is to free the nf_queue_entry via kfree_rcu() instead,
but as we have to alloc/free for each skb this will cause more mem
pressure. |
| In the Linux kernel, the following vulnerability has been resolved:
tls: Fix race condition in tls_sw_cancel_work_tx()
This issue was discovered during a code audit.
After cancel_delayed_work_sync() is called from tls_sk_proto_close(),
tx_work_handler() can still be scheduled from paths such as the
Delayed ACK handler or ksoftirqd.
As a result, the tx_work_handler() worker may dereference a freed
TLS object.
The following is a simple race scenario:
cpu0 cpu1
tls_sk_proto_close()
tls_sw_cancel_work_tx()
tls_write_space()
tls_sw_write_space()
if (!test_and_set_bit(BIT_TX_SCHEDULED, &tx_ctx->tx_bitmask))
set_bit(BIT_TX_SCHEDULED, &ctx->tx_bitmask);
cancel_delayed_work_sync(&ctx->tx_work.work);
schedule_delayed_work(&tx_ctx->tx_work.work, 0);
To prevent this race condition, cancel_delayed_work_sync() is
replaced with disable_delayed_work_sync(). |
| In the Linux kernel, the following vulnerability has been resolved:
espintcp: Fix race condition in espintcp_close()
This issue was discovered during a code audit.
After cancel_work_sync() is called from espintcp_close(),
espintcp_tx_work() can still be scheduled from paths such as
the Delayed ACK handler or ksoftirqd.
As a result, the espintcp_tx_work() worker may dereference a
freed espintcp ctx or sk.
The following is a simple race scenario:
cpu0 cpu1
espintcp_close()
cancel_work_sync(&ctx->work);
espintcp_write_space()
schedule_work(&ctx->work);
To prevent this race condition, cancel_work_sync() is
replaced with disable_work_sync(). |
| In the Linux kernel, the following vulnerability has been resolved:
usb: image: mdc800: kill download URB on timeout
mdc800_device_read() submits download_urb and waits for completion.
If the timeout fires and the device has not responded, the function
returns without killing the URB, leaving it active.
A subsequent read() resubmits the same URB while it is still
in-flight, triggering the WARN in usb_submit_urb():
"URB submitted while active"
Check the return value of wait_event_timeout() and kill the URB if
it indicates timeout, ensuring the URB is complete before its status
is inspected or the URB is resubmitted.
Similar to
- commit 372c93131998 ("USB: yurex: fix control-URB timeout handling")
- commit b98d5000c505 ("media: rc: iguanair: handle timeouts") |
| In the Linux kernel, the following vulnerability has been resolved:
usb: renesas_usbhs: fix use-after-free in ISR during device removal
In usbhs_remove(), the driver frees resources (including the pipe array)
while the interrupt handler (usbhs_interrupt) is still registered. If an
interrupt fires after usbhs_pipe_remove() but before the driver is fully
unbound, the ISR may access freed memory, causing a use-after-free.
Fix this by calling devm_free_irq() before freeing resources. This ensures
the interrupt handler is both disabled and synchronized (waits for any
running ISR to complete) before usbhs_pipe_remove() is called. |
