| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: amd: acp-mach-common: Add missing error check for clock acquisition
The acp_card_rt5682_init() and acp_card_rt5682s_init() functions did not
check the return values of clk_get(). This could lead to a kernel crash
when the invalid pointers are later dereferenced by clock core
functions.
Fix this by:
1. Changing clk_get() to the device-managed devm_clk_get().
2. Adding IS_ERR() checks immediately after each clock acquisition. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Unreserve bo if queue update failed
Error handling path should unreserve bo then return failed.
(cherry picked from commit c24afed7de9ecce341825d8ab55a43a254348b33) |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: mpi3mr: Add NULL checks when resetting request and reply queues
The driver encountered a crash during resource cleanup when the reply and
request queues were NULL due to freed memory. This issue occurred when the
creation of reply or request queues failed, and the driver freed the memory
first, but attempted to mem set the content of the freed memory, leading to
a system crash.
Add NULL pointer checks for reply and request queues before accessing the
reply/request memory during cleanup |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/siw: Fix potential NULL pointer dereference in header processing
If siw_get_hdr() returns -EINVAL before set_rx_fpdu_context(),
qp->rx_fpdu can be NULL. The error path in siw_tcp_rx_data()
dereferences qp->rx_fpdu->more_ddp_segs without checking, which
may lead to a NULL pointer deref. Only check more_ddp_segs when
rx_fpdu is present.
KASAN splat:
[ 101.384271] KASAN: null-ptr-deref in range [0x00000000000000c0-0x00000000000000c7]
[ 101.385869] RIP: 0010:siw_tcp_rx_data+0x13ad/0x1e50 |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: fix NULL dereference and UAF in smc_tcp_syn_recv_sock()
Syzkaller reported a panic in smc_tcp_syn_recv_sock() [1].
smc_tcp_syn_recv_sock() is called in the TCP receive path
(softirq) via icsk_af_ops->syn_recv_sock on the clcsock (TCP
listening socket). It reads sk_user_data to get the smc_sock
pointer. However, when the SMC listen socket is being closed
concurrently, smc_close_active() sets clcsock->sk_user_data
to NULL under sk_callback_lock, and then the smc_sock itself
can be freed via sock_put() in smc_release().
This leads to two issues:
1) NULL pointer dereference: sk_user_data is NULL when
accessed.
2) Use-after-free: sk_user_data is read as non-NULL, but the
smc_sock is freed before its fields (e.g., queued_smc_hs,
ori_af_ops) are accessed.
The race window looks like this (the syzkaller crash [1]
triggers via the SYN cookie path: tcp_get_cookie_sock() ->
smc_tcp_syn_recv_sock(), but the normal tcp_check_req() path
has the same race):
CPU A (softirq) CPU B (process ctx)
tcp_v4_rcv()
TCP_NEW_SYN_RECV:
sk = req->rsk_listener
sock_hold(sk)
/* No lock on listener */
smc_close_active():
write_lock_bh(cb_lock)
sk_user_data = NULL
write_unlock_bh(cb_lock)
...
smc_clcsock_release()
sock_put(smc->sk) x2
-> smc_sock freed!
tcp_check_req()
smc_tcp_syn_recv_sock():
smc = user_data(sk)
-> NULL or dangling
smc->queued_smc_hs
-> crash!
Note that the clcsock and smc_sock are two independent objects
with separate refcounts. TCP stack holds a reference on the
clcsock, which keeps it alive, but this does NOT prevent the
smc_sock from being freed.
Fix this by using RCU and refcount_inc_not_zero() to safely
access smc_sock. Since smc_tcp_syn_recv_sock() is called in
the TCP three-way handshake path, taking read_lock_bh on
sk_callback_lock is too heavy and would not survive a SYN
flood attack. Using rcu_read_lock() is much more lightweight.
- Set SOCK_RCU_FREE on the SMC listen socket so that
smc_sock freeing is deferred until after the RCU grace
period. This guarantees the memory is still valid when
accessed inside rcu_read_lock().
- Use rcu_read_lock() to protect reading sk_user_data.
- Use refcount_inc_not_zero(&smc->sk.sk_refcnt) to pin the
smc_sock. If the refcount has already reached zero (close
path completed), it returns false and we bail out safely.
Note: smc_hs_congested() has a similar lockless read of
sk_user_data without rcu_read_lock(), but it only checks for
NULL and accesses the global smc_hs_wq, never dereferencing
any smc_sock field, so it is not affected.
Reproducer was verified with mdelay injection and smc_run,
the issue no longer occurs with this patch applied.
[1] https://syzkaller.appspot.com/bug?extid=827ae2bfb3a3529333e9 |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_tcm: Fix NULL pointer dereferences in nexus handling
The `tpg->tpg_nexus` pointer in the USB Target driver is dynamically
managed and tied to userspace configuration via ConfigFS. It can be
NULL if the USB host sends requests before the nexus is fully
established or immediately after it is dropped.
Currently, functions like `bot_submit_command()` and the data
transfer paths retrieve `tv_nexus = tpg->tpg_nexus` and immediately
dereference `tv_nexus->tvn_se_sess` without any validation. If a
malicious or misconfigured USB host sends a BOT (Bulk-Only Transport)
command during this race window, it triggers a NULL pointer
dereference, leading to a kernel panic (local DoS).
This exposes an inconsistent API usage within the module, as peer
functions like `usbg_submit_command()` and `bot_send_bad_response()`
correctly implement a NULL check for `tv_nexus` before proceeding.
Fix this by bringing consistency to the nexus handling. Add the
missing `if (!tv_nexus)` checks to the vulnerable BOT command and
request processing paths, aborting the command gracefully with an
error instead of crashing the system. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc, afs: Fix missing error pointer check after rxrpc_kernel_lookup_peer()
rxrpc_kernel_lookup_peer() can also return error pointers in addition to
NULL, so just checking for NULL is not sufficient.
Fix this by:
(1) Changing rxrpc_kernel_lookup_peer() to return -ENOMEM rather than NULL
on allocation failure.
(2) Making the callers in afs use IS_ERR() and PTR_ERR() to pass on the
error code returned. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: ufs: core: Fix possible NULL pointer dereference in ufshcd_add_command_trace()
The kernel log indicates a crash in ufshcd_add_command_trace, due to a NULL
pointer dereference when accessing hwq->id. This can happen if
ufshcd_mcq_req_to_hwq() returns NULL.
This patch adds a NULL check for hwq before accessing its id field to
prevent a kernel crash.
Kernel log excerpt:
[<ffffffd5d192dc4c>] notify_die+0x4c/0x8c
[<ffffffd5d1814e58>] __die+0x60/0xb0
[<ffffffd5d1814d64>] die+0x4c/0xe0
[<ffffffd5d181575c>] die_kernel_fault+0x74/0x88
[<ffffffd5d1864db4>] __do_kernel_fault+0x314/0x318
[<ffffffd5d2a3cdf8>] do_page_fault+0xa4/0x5f8
[<ffffffd5d2a3cd34>] do_translation_fault+0x34/0x54
[<ffffffd5d1864524>] do_mem_abort+0x50/0xa8
[<ffffffd5d2a297dc>] el1_abort+0x3c/0x64
[<ffffffd5d2a29718>] el1h_64_sync_handler+0x44/0xcc
[<ffffffd5d181133c>] el1h_64_sync+0x80/0x88
[<ffffffd5d255c1dc>] ufshcd_add_command_trace+0x23c/0x320
[<ffffffd5d255bad8>] ufshcd_compl_one_cqe+0xa4/0x404
[<ffffffd5d2572968>] ufshcd_mcq_poll_cqe_lock+0xac/0x104
[<ffffffd5d11c7460>] ufs_mtk_mcq_intr+0x54/0x74 [ufs_mediatek_mod]
[<ffffffd5d19ab92c>] __handle_irq_event_percpu+0xc8/0x348
[<ffffffd5d19abca8>] handle_irq_event+0x3c/0xa8
[<ffffffd5d19b1f0c>] handle_fasteoi_irq+0xf8/0x294
[<ffffffd5d19aa778>] generic_handle_domain_irq+0x54/0x80
[<ffffffd5d18102bc>] gic_handle_irq+0x1d4/0x330
[<ffffffd5d1838210>] call_on_irq_stack+0x44/0x68
[<ffffffd5d183af30>] do_interrupt_handler+0x78/0xd8
[<ffffffd5d2a29c00>] el1_interrupt+0x48/0xa8
[<ffffffd5d2a29ba8>] el1h_64_irq_handler+0x14/0x24
[<ffffffd5d18113c4>] el1h_64_irq+0x80/0x88
[<ffffffd5d2527fb4>] arch_local_irq_enable+0x4/0x1c
[<ffffffd5d25282e4>] cpuidle_enter+0x34/0x54
[<ffffffd5d195a678>] do_idle+0x1dc/0x2f8
[<ffffffd5d195a7c4>] cpu_startup_entry+0x30/0x3c
[<ffffffd5d18155c4>] secondary_start_kernel+0x134/0x1ac
[<ffffffd5d18640bc>] __secondary_switched+0xc4/0xcc |
| In the Linux kernel, the following vulnerability has been resolved:
xhci: Fix NULL pointer dereference when reading portli debugfs files
Michal reported and debgged a NULL pointer dereference bug in the
recently added portli debugfs files
Oops is caused when there are more port registers counted in
xhci->max_ports than ports reported by Supported Protocol capabilities.
This is possible if max_ports is more than maximum port number, or
if there are gaps between ports of different speeds the 'Supported
Protocol' capabilities.
In such cases port->rhub will be NULL so we can't reach xhci behind it.
Add an explicit NULL check for this case, and print portli in hex
without dereferencing port->rhub. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_fw: fix NULL pointer dereference on shared blocks
The old-method path in fw_classify() calls tcf_block_q() and
dereferences q->handle. Shared blocks leave block->q NULL, causing a
NULL deref when an empty cls_fw filter is attached to a shared block
and a packet with a nonzero major skb mark is classified.
Reject the configuration in fw_change() when the old method (no
TCA_OPTIONS) is used on a shared block, since fw_classify()'s
old-method path needs block->q which is NULL for shared blocks.
The fixed null-ptr-deref calling stack:
KASAN: null-ptr-deref in range [0x0000000000000038-0x000000000000003f]
RIP: 0010:fw_classify (net/sched/cls_fw.c:81)
Call Trace:
tcf_classify (./include/net/tc_wrapper.h:197 net/sched/cls_api.c:1764 net/sched/cls_api.c:1860)
tc_run (net/core/dev.c:4401)
__dev_queue_xmit (net/core/dev.c:4535 net/core/dev.c:4790) |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_flow: fix NULL pointer dereference on shared blocks
flow_change() calls tcf_block_q() and dereferences q->handle to derive
a default baseclass. Shared blocks leave block->q NULL, causing a NULL
deref when a flow filter without a fully qualified baseclass is created
on a shared block.
Check tcf_block_shared() before accessing block->q and return -EINVAL
for shared blocks. This avoids the null-deref shown below:
=======================================================================
KASAN: null-ptr-deref in range [0x0000000000000038-0x000000000000003f]
RIP: 0010:flow_change (net/sched/cls_flow.c:508)
Call Trace:
tc_new_tfilter (net/sched/cls_api.c:2432)
rtnetlink_rcv_msg (net/core/rtnetlink.c:6980)
[...]
======================================================================= |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: x_tables: restrict xt_check_match/xt_check_target extensions for NFPROTO_ARP
Weiming Shi says:
xt_match and xt_target structs registered with NFPROTO_UNSPEC can be
loaded by any protocol family through nft_compat. When such a
match/target sets .hooks to restrict which hooks it may run on, the
bitmask uses NF_INET_* constants. This is only correct for families
whose hook layout matches NF_INET_*: IPv4, IPv6, INET, and bridge
all share the same five hooks (PRE_ROUTING ... POST_ROUTING).
ARP only has three hooks (IN=0, OUT=1, FORWARD=2) with different
semantics. Because NF_ARP_OUT == 1 == NF_INET_LOCAL_IN, the .hooks
validation silently passes for the wrong reasons, allowing matches to
run on ARP chains where the hook assumptions (e.g. state->in being
set on input hooks) do not hold. This leads to NULL pointer
dereferences; xt_devgroup is one concrete example:
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000044: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000220-0x0000000000000227]
RIP: 0010:devgroup_mt+0xff/0x350
Call Trace:
<TASK>
nft_match_eval (net/netfilter/nft_compat.c:407)
nft_do_chain (net/netfilter/nf_tables_core.c:285)
nft_do_chain_arp (net/netfilter/nft_chain_filter.c:61)
nf_hook_slow (net/netfilter/core.c:623)
arp_xmit (net/ipv4/arp.c:666)
</TASK>
Kernel panic - not syncing: Fatal exception in interrupt
Fix it by restricting arptables to NFPROTO_ARP extensions only.
Note that arptables-legacy only supports:
- arpt_CLASSIFY
- arpt_mangle
- arpt_MARK
that provide explicit NFPROTO_ARP match/target declarations. |
| In the Linux kernel, the following vulnerability has been resolved:
rds: ib: reject FRMR registration before IB connection is established
rds_ib_get_mr() extracts the rds_ib_connection from conn->c_transport_data
and passes it to rds_ib_reg_frmr() for FRWR memory registration. On a
fresh outgoing connection, ic is allocated in rds_ib_conn_alloc() with
i_cm_id = NULL because the connection worker has not yet called
rds_ib_conn_path_connect() to create the rdma_cm_id. When sendmsg() with
RDS_CMSG_RDMA_MAP is called on such a connection, the sendmsg path parses
the control message before any connection establishment, allowing
rds_ib_post_reg_frmr() to dereference ic->i_cm_id->qp and crash the
kernel.
The existing guard in rds_ib_reg_frmr() only checks for !ic (added in
commit 9e630bcb7701), which does not catch this case since ic is allocated
early and is always non-NULL once the connection object exists.
KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
RIP: 0010:rds_ib_post_reg_frmr+0x50e/0x920
Call Trace:
rds_ib_post_reg_frmr (net/rds/ib_frmr.c:167)
rds_ib_map_frmr (net/rds/ib_frmr.c:252)
rds_ib_reg_frmr (net/rds/ib_frmr.c:430)
rds_ib_get_mr (net/rds/ib_rdma.c:615)
__rds_rdma_map (net/rds/rdma.c:295)
rds_cmsg_rdma_map (net/rds/rdma.c:860)
rds_sendmsg (net/rds/send.c:1363)
____sys_sendmsg
do_syscall_64
Add a check in rds_ib_get_mr() that verifies ic, i_cm_id, and qp are all
non-NULL before proceeding with FRMR registration, mirroring the guard
already present in rds_ib_post_inv(). Return -ENODEV when the connection
is not ready, which the existing error handling in rds_cmsg_send() converts
to -EAGAIN for userspace retry and triggers rds_conn_connect_if_down() to
start the connection worker. |
| In the Linux kernel, the following vulnerability has been resolved:
net: atm: fix crash due to unvalidated vcc pointer in sigd_send()
Reproducer available at [1].
The ATM send path (sendmsg -> vcc_sendmsg -> sigd_send) reads the vcc
pointer from msg->vcc and uses it directly without any validation. This
pointer comes from userspace via sendmsg() and can be arbitrarily forged:
int fd = socket(AF_ATMSVC, SOCK_DGRAM, 0);
ioctl(fd, ATMSIGD_CTRL); // become ATM signaling daemon
struct msghdr msg = { .msg_iov = &iov, ... };
*(unsigned long *)(buf + 4) = 0xdeadbeef; // fake vcc pointer
sendmsg(fd, &msg, 0); // kernel dereferences 0xdeadbeef
In normal operation, the kernel sends the vcc pointer to the signaling
daemon via sigd_enq() when processing operations like connect(), bind(),
or listen(). The daemon is expected to return the same pointer when
responding. However, a malicious daemon can send arbitrary pointer values.
Fix this by introducing find_get_vcc() which validates the pointer by
searching through vcc_hash (similar to how sigd_close() iterates over
all VCCs), and acquires a reference via sock_hold() if found.
Since struct atm_vcc embeds struct sock as its first member, they share
the same lifetime. Therefore using sock_hold/sock_put is sufficient to
keep the vcc alive while it is being used.
Note that there may be a race with sigd_close() which could mark the vcc
with various flags (e.g., ATM_VF_RELEASED) after find_get_vcc() returns.
However, sock_hold() guarantees the memory remains valid, so this race
only affects the logical state, not memory safety.
[1]: https://gist.github.com/mrpre/1ba5949c45529c511152e2f4c755b0f3 |
| In the Linux kernel, the following vulnerability has been resolved:
spi: fix statistics allocation
The controller per-cpu statistics is not allocated until after the
controller has been registered with driver core, which leaves a window
where accessing the sysfs attributes can trigger a NULL-pointer
dereference.
Fix this by moving the statistics allocation to controller allocation
while tying its lifetime to that of the controller (rather than using
implicit devres). |
| In the Linux kernel, the following vulnerability has been resolved:
mac80211: fix crash in ieee80211_chan_bw_change for AP_VLAN stations
ieee80211_chan_bw_change() iterates all stations and accesses
link->reserved.oper via sta->sdata->link[link_id]. For stations on
AP_VLAN interfaces (e.g. 4addr WDS clients), sta->sdata points to
the VLAN sdata, whose link never participates in chanctx reservations.
This leaves link->reserved.oper zero-initialized with chan == NULL,
causing a NULL pointer dereference in __ieee80211_sta_cap_rx_bw()
when accessing chandef->chan->band during CSA.
Resolve the VLAN sdata to its parent AP sdata using get_bss_sdata()
before accessing link data.
[also change sta->sdata in ARRAY_SIZE even if it doesn't matter] |
| libheif is a HEIF and AVIF file format decoder and encoder. In versions 1.21.2 and below, a crafted 792-byte HEIF sequence file with samples_per_chunk=0 in the stsc box causes an unsigned integer underflow in the Chunk constructor (m_last_sample = 0 + 0 - 1 = UINT32_MAX), mapping all samples to an empty chunk and resulting in a denial of service. When any sample is accessed, the library reads from index 0 of an empty std::vector, causing a guaranteed SEGV (null-page read). The file parses successfully without producing an error; the crash occurs on the first frame access. This issue has been fixed in version 1.22.0. |
| A flaw was found in binutils, specifically within the `readelf` utility. This vulnerability allows a local attacker to cause a Denial of Service (DoS) by tricking a user into processing a specially crafted Executable and Linkable Format (ELF) file. The exploitation of this flaw can lead to the system becoming unresponsive due to excessive resource consumption or a program crash. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/huge_memory: fix use of NULL folio in move_pages_huge_pmd()
move_pages_huge_pmd() handles UFFDIO_MOVE for both normal THPs and huge
zero pages. For the huge zero page path, src_folio is explicitly set to
NULL, and is used as a sentinel to skip folio operations like lock and
rmap.
In the huge zero page branch, src_folio is NULL, so folio_mk_pmd(NULL,
pgprot) passes NULL through folio_pfn() and page_to_pfn(). With
SPARSEMEM_VMEMMAP this silently produces a bogus PFN, installing a PMD
pointing to non-existent physical memory. On other memory models it is a
NULL dereference.
Use page_folio(src_page) to obtain the valid huge zero folio from the
page, which was obtained from pmd_page() and remains valid throughout.
After commit d82d09e48219 ("mm/huge_memory: mark PMD mappings of the huge
zero folio special"), moved huge zero PMDs must remain special so
vm_normal_page_pmd() continues to treat them as special mappings.
move_pages_huge_pmd() currently reconstructs the destination PMD in the
huge zero page branch, which drops PMD state such as pmd_special() on
architectures with CONFIG_ARCH_HAS_PTE_SPECIAL. As a result,
vm_normal_page_pmd() can treat the moved huge zero PMD as a normal page
and corrupt its refcount.
Instead of reconstructing the PMD from the folio, derive the destination
entry from src_pmdval after pmdp_huge_clear_flush(), then handle the PMD
metadata the same way move_huge_pmd() does for moved entries by marking it
soft-dirty and clearing uffd-wp. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: Defer sub-object cleanup in export put callbacks
svc_export_put() calls path_put() and auth_domain_put() immediately
when the last reference drops, before the RCU grace period. RCU
readers in e_show() and c_show() access both ex_path (via
seq_path/d_path) and ex_client->name (via seq_escape) without
holding a reference. If cache_clean removes the entry and drops the
last reference concurrently, the sub-objects are freed while still
in use, producing a NULL pointer dereference in d_path.
Commit 2530766492ec ("nfsd: fix UAF when access ex_uuid or
ex_stats") moved kfree of ex_uuid and ex_stats into the
call_rcu callback, but left path_put() and auth_domain_put() running
before the grace period because both may sleep and call_rcu
callbacks execute in softirq context.
Replace call_rcu/kfree_rcu with queue_rcu_work(), which defers the
callback until after the RCU grace period and executes it in process
context where sleeping is permitted. This allows path_put() and
auth_domain_put() to be moved into the deferred callback alongside
the other resource releases. Apply the same fix to expkey_put(),
which has the identical pattern with ek_path and ek_client.
A dedicated workqueue scopes the shutdown drain to only NFSD
export release work items; flushing the shared
system_unbound_wq would stall on unrelated work from other
subsystems. nfsd_export_shutdown() uses rcu_barrier() followed
by flush_workqueue() to ensure all deferred release callbacks
complete before the export caches are destroyed.
Reviwed-by: Jeff Layton <jlayton@kernel.org> |
