Export limit exceeded: 377195 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (377195 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-21069 | 1 Samsung | 1 Mobile Devices | 2026-08-13 | N/A |
| Incorrect conversion between numeric types in VC1 codec in libsavsvc.so prior to SMR Aug-2026 Release 1 allows local attackers to write out-of-bounds memory. | ||||
| CVE-2026-68086 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/khugepaged: write all dirty file folios when collapsing [There is no upstream commit, as this code was removed by upstream commit 044925f9b565 ("mm: fs: remove filemap_nr_thps*() functions and their users")] As-is, khugepaged and writable-file opening exclude each other. A file cannot be open writeable and have THPs (because the filesystem is not aware of them). khugepaged will never collapse file pages for files that are opened writeable. On an open(O_RDWR/O_WRONLY), the page cache for that particular file is dropped. This is fine because nothing could've been dirtied. However, there is an edge-case: collapse_file() might not be able to coexist with concurrent writers, but it can coexist with dirty folios (from previous writers). Therefore, the following can happen: open(file, O_RDWR) write(file) close(file) madvise(file_mapping, MADV_COLLAPSE, some non-dirty range) open(file, O_RDWR) nr_thps > 0 truncate_inode_pages() /* THPs are cleared out, but so are the dirty folios */ When this edge-case happens, there is data loss, as the dirty folios are fully discarded. Fix it by fully writing back the page cache (and waiting) when collapsing file THPs. Doing so provides the guarantee that no dirty folio will be observed while there are active THPs. To fully ensure this is safe, the invalidate_lock needs to be held while doing the writeout, so that do_dentry_open()'s page cache truncation excludes this write-and-wait. As a side effect, move the nr_thps counter bumping outside the i_pages lock. This is correct since the counter itself is an atomic_t and the producer <-> consumer correctness is provided by a full memory barrier: smp_mb() in collapse_file()/memory barrier implied by full ordering in get_write_access() -> atomic_inc_unless_negative(). | ||||
| CVE-2026-68087 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: HID: wacom: use GFP_ATOMIC in wacom_wac_queue_flush() wacom_wac_queue_flush() is called via the .raw_event callback (wacom_raw_event → wacom_wac_pen_serial_enforce → wacom_wac_queue_flush). For USB HID devices, this callback is invoked from hid_irq_in(), which is a URB completion handler running in atomic context. Using GFP_KERNEL in this path can sleep, leading to a "scheduling while atomic" bug. Use GFP_ATOMIC instead. The existing code already handles allocation failure by skipping the fifo entry and continuing. | ||||
| CVE-2026-68089 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iio: core: fix uninitialized data in debugfs If *ppos is non-zero then simple_write_to_buffer() will not initialize the start of buf[]. Non zero values for *ppos aren't going to work anyway. Test for them at the start of the function and return -EINVAL. | ||||
| CVE-2026-68090 | 1 Linux | 2 Kernel, Linux Kernel | 2026-08-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: debugobjects: Plug race against a concurrent OOM disable syzbot reported a puzzling splat: WARNING: kernel/time/hrtimer.c:443 at stub_timer+0xa/0x20 stub_timer() is installed as timer callback function in hrtimer_fixup_assert_init(), which is invoked when debug_object_assert_init() can't find a shadow object. In that case debug objects emits a warning about it before invoking the fixup. Though the provided console log lacks this warning and instead has the following a few seconds before the splat: ODEBUG: Out of memory. ODEBUG disabled So the object was looked up in debug_object_assert_init() and the lookup failed due a concurrent out of memory situation which disabled debug objects and freed the shadow objects: debug_object_assert_init() if (!debug_objects_enabled) return; obj = alloc(); if (!obj) { // Out of memory debug_objects_enabled = false; free_objects(); obj = lookup_or_alloc(); // The lookup failed because the other side // removed the objects, so this returns // an error code as the object in question // is not statically initialized if (!IS_ERR_OR_NULL(obj)) return; if (!obj) { debug_oom(); return; } print(...) if (!debug_objects_enabled) return; fixup(...) The debug object splat is skipped because debug_objects_enabled is false, but the fixup callback is invoked unconditionally, which makes the timer disfunctional. This is only a problem in debug_object_assert_init() and debug_object_activate() as both have to handle statically initialized objects and therefore must handle the error pointer return case gracefully. All other places only handle the found/not found case and the NULL pointer return is a signal for OOM. Otherwise they get a valid shadow object. Plug the hole by checking whether debug objects are still enabled before invoking the print and fixup function in those two places. | ||||
| CVE-2026-68092 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: time/jiffies: Register jiffies clocksource before usage Teddy reported that a XEN HVM has a long boot delay, which was bisected to the recent enhancements to the negative motion detection. It turned out that the jiffies clocksource is used in early boot before it is registered, which leaves the max_delta_raw field at zero. That causes the read out to be clamped to the max delta of 0, which means time is not making progress. Cure it by ensuring that it is initialized before its first usage in timekeeping_init(). | ||||
| CVE-2026-68113 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/gfx12: replace BUG_ON() with WARN_ON() There's no need to crash the kernel for these cases. (cherry picked from commit f952076f76d62f783e8ba4995a7c400d39354ccf) | ||||
| CVE-2026-68109 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/sdma7.1: replace BUG_ON() with WARN_ON() There's no need to crash the kernel for these cases. (cherry picked from commit c4f230b51cf2d3e7e8b1c800331f3dbed2a9e3f5) | ||||
| CVE-2026-68165 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/damon/core: validate ranges in damon_set_regions() DAMON core logic assumes zero length regions don't exist. However, a few DAMON API callers including DAMON_SYSFS, DAMON_RECLAIM and DAMON_LRU_SORT allow users to set empty monitoring target regions. This could result in WARN_ONCE() on CONFIG_DAMON_DEBUG_SANITY enabled kernel, and divide-by-zero from damon_merge_two_regions(). For example, the WANR_ONCE() can be triggered like below. # grep DAMON_DEBUG_SANITY /boot/config-$(uname -r) # CONFIG_DAMON_DEBUG_SANITY=y # damo start # cd /sys/kernel/mm/damon/admin/kdamonds/0 # echo 0 > contexts/0/targets/0/regions/0/start # echo 0 > contexts/0/targets/0/regions/0/end # echo commit > state # dmesg [....] [ 73.705780] ------------[ cut here ]------------ [ 73.707552] start 0 >= end 0 [ 73.708452] WARNING: mm/damon/core.c:359 at damon_new_region+0x6e/0x80, CPU#1: kdamond.0/758 [...] All DAMON API callers eventually use damon_set_regions() to setup the regions. Add the validation logic in the function. | ||||
| CVE-2026-68135 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 5.9 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: hip04: fix RX buffer leak on build_skb failure When build_skb() fails in hip04_rx_poll(), the driver jumps to the refill path without releasing the current RX buffer and its DMA mapping. Installing a replacement buffer then overwrites the slot references and leaks both resources. Keep the current slot intact and return budget so NAPI retries the same buffer. Also free a newly allocated RX fragment when dma_map_single() fails. This issue was found by an in-house static analysis tool. | ||||
| CVE-2026-68150 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fs/super: fix emergency thaw double-unlock of s_umount do_thaw_all() iterates over all superblocks via __iterate_supers() with SUPER_ITER_EXCL, which acquires s_umount exclusively before calling the callback and releases it afterwards. However, the callback do_thaw_all_callback() calls thaw_super_locked() which unconditionally releases s_umount on every code path. This results in a second unlock attempt in __iterate_supers() that corrupts the rwsem state, triggering a DEBUG_RWSEMS warning: [ 182.601148] sysrq: Emergency Thaw of all frozen filesystems [ 182.601865] ------------[ cut here ]------------ [ 182.602375] DEBUG_RWSEMS_WARN_ON((rwsem_owner(sem) != current) && !rwsem_test_oflags(sem, RWSEM_NONSPINNABLE)): count = 0x0, magic = 0xffff99b1011e5870, owner = 0x0, curr 0xffff99b101b06c80, list not empty [ 182.603817] WARNING: kernel/locking/rwsem.c:1412 at up_write+0xa3/0x170, CPU#2: kworker/2:1/53 [ 182.604578] Modules linked in: [ 182.604864] CPU: 2 UID: 0 PID: 53 Comm: kworker/2:1 Not tainted 7.2.0-rc4-00001-gbd3bd93ea98a-dirty #4 PREEMPT(lazy) [ 182.605711] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1kylin1 04/01/2014 [ 182.606417] Workqueue: events do_thaw_all [ 182.606750] RIP: 0010:up_write+0xaf/0x170 [ 182.607076] Code: 19 3a 92 48 0f 44 c2 48 8b 55 08 48 8b 55 00 4c 8b 45 08 48 8b 55 00 48 8d 3d ad 91 e0 01 48 8b 4d 20 50 48 c7 c6 f0 8c 26 92 <67> 48 0f b9 3a e8 d7 93 4e 00 58 eb 81 48 83 7f 18 00 48 c7 c2 8d [ 182.608563] RSP: 0018:ffffb670001d7e08 EFLAGS: 00010246 [ 182.609007] RAX: ffffffff92349e8d RBX: 0000000000000000 RCX: ffff99b1011e5870 [ 182.609595] RDX: 0000000000000000 RSI: ffffffff92268cf0 RDI: ffffffff92914d10 [ 182.610283] RBP: ffff99b1011e5870 R08: 0000000000000000 R09: ffff99b101b06c80 [ 182.610847] R10: ffff99b10139a808 R11: fefefefefefefeff R12: 0000000000000000 [ 182.611414] R13: ffffffff90cf74d0 R14: 0000000000000000 R15: ffff99b1011e5800 [ 182.612009] FS: 0000000000000000(0000) GS:ffff99b1eaaee000(0000) knlGS:0000000000000000 [ 182.612670] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 182.613146] CR2: 00000000005c631c CR3: 00000000013ee000 CR4: 00000000000006f0 [ 182.613722] Call Trace: [ 182.613946] <TASK> [ 182.614130] __iterate_supers+0x128/0x150 [ 182.614463] do_thaw_all+0x1b/0x30 [ 182.614759] process_scheduled_works+0xbb/0x3f0 [ 182.615150] ? __pfx_worker_thread+0x10/0x10 [ 182.615499] worker_thread+0x129/0x270 [ 182.615816] ? __pfx_worker_thread+0x10/0x10 [ 182.616201] kthread+0xe2/0x120 [ 182.616469] ? __pfx_kthread+0x10/0x10 [ 182.616792] ret_from_fork+0x15b/0x240 [ 182.617115] ? __pfx_kthread+0x10/0x10 [ 182.617426] ret_from_fork_asm+0x1a/0x30 [ 182.617761] </TASK> [ 182.617968] ---[ end trace 0000000000000000 ]--- [ 182.618412] Emergency Thaw complete Fix this by switching to SUPER_ITER_UNLOCKED and acquiring s_umount in the callback via super_lock_excl() before calling thaw_super_locked(). This matches the locking pattern expected by thaw_super_locked() and eliminates the double unlock. While at it, remove the dead 'return;' at the end of do_thaw_all_callback(). | ||||
| CVE-2026-68174 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Fix union collision of module and refcnt for dynamic events In 'struct trace_event_call', the 'module' pointer and the 'refcnt' atomic variable share the same memory space in a union. For dynamic events, the union member is 'refcnt', which acts as an active reference counter. When a dynamic event (such as kprobe, uprobe, fprobe, eprobe, or wprobe) has a non-zero reference count (e.g. due to active event triggers or perf attachments), its 'call->module' evaluates to a small non-zero integer instead of NULL. When filtering or setting events for a specific module (e.g., writing ':mod:<module>' to 'set_event'), the code in '__ftrace_set_clr_event_nolock()' and 'update_event_fields()' reads 'call->module' directly without checking whether the event is dynamic. This causes the kernel to treat the small integer (refcnt) as a 'struct module' pointer, leading to a NULL/invalid pointer dereference (Oops) when dereferencing the module name. Fix this by ensuring that the 'TRACE_EVENT_FL_DYNAMIC' flag is checked before treating 'call->module' as a valid pointer in these code paths. | ||||
| CVE-2026-68164 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/damon/core: disallow overlapping input ranges for damon_set_regions() damon_set_regions() assumes the input ranges are sorted by the address and don't overlap each other. Hence the assumption was initially to be explicitly validated. But commit 97d482f4592f ("mm/damon/sysfs: reuse damon_set_regions() for regions setting") has mistakenly removed the validation. This can make DAMON behave in unexpected ways. At the best, the monitoring results snapshot will just look weird since there will be overlapping regions. DAMOS will also work weirdly, applying the same action multiple times for overlapping regions, and make DAMOS quota weird. More seriously, depending on the setup and regions updates sequence, negative size regions can be made. It will trigger WARN_ONCE() if the kernel is built with CONFIG_DAMON_DEBUG_SANITY=y. Depending on the monitoring results, the negative size region can further trigger division by zero in damon_merge_two_regions(). Note that some of the consequences including the WARN_ONCE() and the divide by zero depend on commits that were introduced after the root cause commit 97d482f4592f ("mm/damon/sysfs: reuse damon_set_regions() for regions setting"). Fix the problems by checking the assumption and returning an error if the input ranges don't meet the assumption. The issue was discovered [1] by Sashiko. | ||||
| CVE-2026-68166 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: userfaultfd: prevent registration of special VMAs Vova Tokarev says: userfaultfd allows registration on shadow stack VMAs. With userfaultfd access, you can register on the shadow stack, discard a page ... and inject a page with chosen return addresses via UFFDIO_COPY. Update vma_can_userfault() to reject VM_SHADOW_STACK. While on it, also reject VM_SPECIAL so that if a driver would implement vm_uffd_ops, it wouldn't be possible to register special VMAs with userfaultfd. Since VM_SPECIAL includes VM_DONTEXPAND which is set but hugetlb, exclude hugetlb VMAs from the check for VM_SPECIAL. | ||||
| CVE-2026-68168 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: afs: Fix afs_edit_dir_remove() to get, not find, block 0 Fix afs_edit_dir_remove() to use afs_dir_get_block() to get block 0 rather than afs_dir_find_block() as the latter caches the found block in the afs_dir_iter and may[*] switch out the page it's on if another afs_dir_find_block() is done. This parallels what afs_edit_dir_add() does. [*] There's more than one block per page. | ||||
| CVE-2026-68169 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: pm: userspace: fix use-after-free in get_local_id In mptcp_pm_userspace_get_local_id(), the address entry is looked up under spinlock, but its id is read after dropping the lock. A concurrent deletion can free the entry between the unlock and the read, leading to UAF. The race window is narrow. It was reproduced only with a locally constructed stress test that repeatedly overlaps an MP_JOIN SYN with a MPTCP_PM_CMD_SUBFLOW_DESTROY request. However, the KASAN report below confirms that the race is reachable: [ 666.319376] BUG: KASAN: slab-use-after-free in mptcp_userspace_pm_get_local_id+0x1dc/0x1f0 [ 666.319386] Read of size 1 at addr ffff888124845610 by task swapper/0/0 ... [ 666.319401] Call Trace: [ 666.319405] <IRQ> [ 666.319408] dump_stack_lvl+0x53/0x70 [ 666.319412] print_address_description.constprop.0+0x2c/0x3b0 [ 666.319418] print_report+0xbe/0x2b0 [ 666.319421] ? mptcp_userspace_pm_get_local_id+0x1dc/0x1f0 [ 666.319423] kasan_report+0xce/0x100 [ 666.319426] ? mptcp_userspace_pm_get_local_id+0x1dc/0x1f0 [ 666.319429] mptcp_userspace_pm_get_local_id+0x1dc/0x1f0 [ 666.319433] mptcp_pm_get_local_id+0x371/0x440 ... [ 666.319821] Allocated by task 45539: [ 666.319844] kasan_save_stack+0x33/0x60 [ 666.319855] kasan_save_track+0x14/0x30 [ 666.319858] __kasan_kmalloc+0x8f/0xa0 [ 666.319863] __kmalloc_noprof+0x1e7/0x520 [ 666.319867] sock_kmalloc+0xdf/0x130 [ 666.319885] sock_kmemdup+0x1b/0x40 [ 666.319888] mptcp_userspace_pm_append_new_local_addr+0x261/0x500 [ 666.319910] mptcp_pm_nl_announce_doit+0x16a/0x610 ... [ 666.319967] Freed by task 45560: [ 666.319988] kasan_save_stack+0x33/0x60 [ 666.319991] kasan_save_track+0x14/0x30 [ 666.319994] kasan_save_free_info+0x3b/0x60 [ 666.319998] __kasan_slab_free+0x43/0x70 [ 666.320000] kfree+0x166/0x440 [ 666.320003] sock_kfree_s+0x1d/0x50 [ 666.320007] mptcp_userspace_pm_delete_local_addr.isra.0+0x157/0x200 [ 666.320011] mptcp_pm_nl_subflow_destroy_doit+0x51d/0xea0 Fix by copying the id into a local variable while still holding the lock, and use -1 as a "not found" sentinel. | ||||
| CVE-2026-68175 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Fix resource leak on mmiotrace trace_pipe close The mmiotrace tracer was added May 12th 2008. At that time, resources created in pipe_open() could not be freed because there was not pipe_close function pointer of the tracer. The pipe_close function pointer was added in December 7th, 2009, but the mmiotrace tracer was not updated. mmio_pipe_open() allocates a header_iter and takes a pci_dev reference when trace_pipe is opened. mmio_close() frees them, but it was only wired to the tracer's .close callback. tracing_release_pipe() invokes .pipe_close, not .close, when the trace_pipe file is released. As a result, closing trace_pipe with the mmiotrace tracer active leaked the header_iter allocation and left a stale pci_dev reference. Set .pipe_close to mmio_close, matching how function_graph wires both callbacks to the same handler. Note, if the trace_pipe is read to completion, it will clean up the resources, but if one were to run: # head -n 1 /sys/kernel/tracing/trace_pipe VERSION 20070824 Over and over again, it would trigger a massive leak. | ||||
| CVE-2026-68180 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: intel_th: fix MSC output device reference leak intel_th_output_open() looks up the output device with bus_find_device_by_devt(), which returns the device with a reference that must be dropped after use. commit 95fc36a234da ("intel_th: fix device leak on output open()") attempted to drop the reference from intel_th_output_release(). However, a successful open replaces file->f_op with the output driver file operations before returning, so close runs the output driver release callback instead. For MSC outputs, close runs intel_th_msc_release(), which only removes the per-file iterator and does not drop the device reference taken by intel_th_output_open(). Consequently, every successful MSC output open leaks one device reference. Drop the device reference from intel_th_msc_release(), which is the release path actually used for MSC output files. Remove the now-unused intel_th_output_release() callback from intel_th_output_fops. | ||||
| CVE-2026-68181 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: mei: bus: access mei_device under device_lock on cleanup Fix couple of problems in mei_cl_bus_dev_release(): mei_cl_flush_queues() is running without lock. bus->file_list access after mei_dev_bus_put(bus) can become a use-after-free if this was the last reference to bus. Protect queues cleanup and WARN traversal by device lock there to avoid the concurrent access problems. Move WARN traversal before mei_dev_bus_put(bus). This file uses bus variable name for mei_device, adjust code of mei_cl_bus_dev_release() to use bus variable too. | ||||
| CVE-2026-68183 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: firmware: stratix10-svc: fix memory leaks and list corruption bugs Fix a memory leak when gen_pool_alloc() fails by freeing pmem on the error path. Switch pmem allocation from devm_kzalloc() to kzalloc() with explicit kfree() in the free path to match its list-managed lifetime. Remove the erroneous list_del(&svc_data_mem) which corrupted the list head on failed lookups. | ||||