Export limit exceeded: 12910 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (381943 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-72015 | 1 Linux | 1 Linux Kernel | 2026-08-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fs/resctrl: Fix double-add of pseudo-locked region's RMID to free list A pseudo-locked group's RMID is freed when it is created. On unmount rmdir_all_sub() unconditionally frees all RMID of all groups, resulting in a double-free of the pseudo-locked group's RMID. The consequence of this is that the original free results in the pseudo-locked group's RMID being added to the rmid_free_lru linked list and the second free then attempts to add the same RMID entry to the rmid_free_lru again. Do not double-free a pseudo-locked group's RMID. | ||||
| CVE-2026-72012 | 1 Linux | 1 Linux Kernel | 2026-08-23 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: tracing/osnoise: Call synchronize_rcu() when unregistering This ensures that any RCU readers traversing the instance list have finished, before releasing the reference on the tracer that the instance points to. | ||||
| CVE-2026-68434 | 1 Linux | 1 Linux Kernel | 2026-08-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: serial: 8250_mid: Fix NULL function pointer dereference on DNV/ICX-D/SNR platforms Commit b1b4efea05a5 ("serial: 8250_mid: Disable DMA for selected platforms") replaced the dnv_board setup and exit callbacks with PTR_IF(false, ...), which evaluates to NULL. However, the three call sites in mid8250_probe() and mid8250_remove() unconditionally dereference these function pointers without NULL checks, causing a NULL pointer dereference (kernel oops) on any Denverton (DNV), Ice Lake Xeon D (ICX-D/CDF), or Snowridge (SNR) platform. Fix this by adding the missing NULL checks before calling the setup and exit callbacks. | ||||
| CVE-2026-68431 | 1 Linux | 1 Linux Kernel | 2026-08-23 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: validate minimum PDU size for transform requests The receive path applies the minimum SMB2 PDU size check only when ProtocolId is SMB2_PROTO_NUMBER. A packet carrying SMB2_TRANSFORM_PROTO_NUM bypasses the check even when the negotiated dialect does not provide transform handling. On an SMB 2.1 connection, a short transform packet therefore reaches init_smb2_rsp_hdr(), which interprets the request as a full SMB2 header and reads beyond the request allocation. The copied fields can then be returned to the unauthenticated client. Compression transforms are converted to ordinary SMB2 messages before protocol validation. After that conversion, validate ordinary SMB2 requests against SMB2_MIN_SUPPORTED_PDU_SIZE and require encryption transform requests to contain both a transform header and an SMB2 header. This rejects truncated requests before work allocation. | ||||
| CVE-2026-68392 | 1 Linux | 1 Linux Kernel | 2026-08-23 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: mgmt: fix locking in unpair_device/disconnect_sync Dereferencing RCU-protected pointers outside critical sections is invalid and may lead to UAF. Take hdev->lock for hci_conn lookup and hci_abort_conn(). Don't use RCU to ensure the conn is fully initialized at this point. | ||||
| CVE-2026-68371 | 1 Linux | 1 Linux Kernel | 2026-08-23 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: musb: omap2430: Do not put borrowed of_node in probe omap2430_probe() stores pdev->dev.of_node in a local np variable. This is a borrowed pointer and the probe function does not take a reference to it. The success and error paths nevertheless call of_node_put(np). This drops a reference that is owned by the platform device, and can leave pdev->dev.of_node with an unbalanced reference count. Do not put the borrowed platform device node from omap2430_probe(). References taken for the child MUSB device are handled by the device core, and the ctrl-module phandle reference is still released separately. | ||||
| CVE-2026-68367 | 1 Linux | 1 Linux Kernel | 2026-08-23 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_tcm: synchronize delayed set_alt with teardown The f_tcm set_alt() path defers endpoint setup to a work item and completes the delayed status response from process context. The delayed work uses f_tcm private state and may complete the setup request after disconnect or function teardown has already moved on. Cancel and drain the delayed set_alt work when the function is unbound or freed. For disable paths, which are reached under the composite device lock, use a small state machine and a non-sleeping cancellation path instead of cancel_work_sync(). If the work is already running, mark it cancelled and let the worker own the cleanup; otherwise tcm_disable() can cancel the queued work and clean up immediately. Also serialize the final delayed-status completion with the cancellation check while holding the composite device lock. This prevents a disconnect from clearing delayed_status while the worker is about to complete the control request. Validation reproduced this kernel report: BUG: KASAN: slab-use-after-free in tcm_delayed_set_alt+0x6c/0xef0 Call Trace: <TASK> dump_stack_lvl+0x66/0xa0 print_report+0xce/0x630 ? tcm_delayed_set_alt+0x6c/0xef0 ? srso_alias_return_thunk+0x5/0xfbef5 ? __virt_addr_valid+0x188/0x320 ? tcm_delayed_set_alt+0x6c/0xef0 kasan_report+0xe0/0x110 ? tcm_delayed_set_alt+0x6c/0xef0 tcm_delayed_set_alt+0x6c/0xef0 ? __pfx_tcm_delayed_set_alt+0x10/0x10 ? process_one_work+0x4cb/0xb90 ? rcu_is_watching+0x20/0x50 ? tcm_delayed_set_alt+0x9/0xef0 process_one_work+0x4d7/0xb90 ? __pfx_process_one_work+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? __list_add_valid_or_report+0x37/0xf0 ? __pfx_tcm_delayed_set_alt+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 worker_thread+0x2d8/0x570 ? __pfx_worker_thread+0x10/0x10 kthread+0x1ad/0x1f0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x3c9/0x540 ? __pfx_ret_from_fork+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? __switch_to+0x2e9/0x730 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 544: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0x8f/0xa0 tcm_alloc+0x68/0x180 usb_get_function+0x36/0x60 config_usb_cfg_link+0x125/0x1b0 configfs_symlink+0x322/0x890 vfs_symlink+0xc2/0x270 filename_symlinkat+0x295/0x2f0 __x64_sys_symlinkat+0x62/0x90 do_syscall_64+0x115/0x6a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 661: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x43/0x70 kfree+0x2f9/0x530 config_usb_cfg_unlink+0x173/0x1e0 configfs_unlink+0x1fa/0x340 vfs_unlink+0x15c/0x510 filename_unlinkat+0x2ba/0x450 __x64_sys_unlinkat+0x63/0x90 do_syscall_64+0x115/0x6a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f | ||||
| CVE-2026-68280 | 1 Linux | 1 Linux Kernel | 2026-08-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/bridge: cdns-dsi: Replace deprecated UNIVERSAL_DEV_PM_OPS() The deprecated UNIVERSAL_DEV_PM_OPS() macro uses the provided callbacks for both runtime PM and system sleep. This causes the DSI clocks to be disabled twice: once during runtime suspend and again during system suspend, resulting in a WARN message from the clock framework when attempting to disable already-disabled clocks. [ 84.384540] clk:231:5 already disabled [ 84.388314] WARNING: CPU: 2 PID: 531 at /drivers/clk/clk.c:1181 clk_core_disable+0xa4/0xac ... [ 84.579183] Call trace: [ 84.581624] clk_core_disable+0xa4/0xac [ 84.585457] clk_disable+0x30/0x4c [ 84.588857] cdns_dsi_suspend+0x20/0x58 [cdns_dsi] [ 84.593651] pm_generic_suspend+0x2c/0x44 [ 84.597661] ti_sci_pd_suspend+0xbc/0x15c [ 84.601670] dpm_run_callback+0x8c/0x14c [ 84.605588] __device_suspend+0x1a0/0x56c [ 84.609594] dpm_suspend+0x17c/0x21c [ 84.613165] dpm_suspend_start+0xa0/0xa8 [ 84.617083] suspend_devices_and_enter+0x12c/0x634 [ 84.621872] pm_suspend+0x1fc/0x368 To address this issue, replace UNIVERSAL_DEV_PM_OPS() with RUNTIME_PM_OPS(). Bridge and panel drivers should only deal with runtime PM, as the DRM framework manages system-wide power transitions through the bridge enable() and disable() hooks. | ||||
| CVE-2026-68279 | 1 Linux | 1 Linux Kernel | 2026-08-23 | 5.0 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/dp/mst: fix OOB reads in remote DPCD/I2C sideband reply parsers drm_dp_sideband_parse_remote_dpcd_read() reads num_bytes from the raw message and then unconditionally does: memcpy(bytes, &raw->msg[idx], num_bytes); without checking that idx + num_bytes <= raw->curlen. raw->msg[] is 256 bytes; if a malicious or misbehaving MST hub sets num_bytes larger than the remaining payload, the memcpy reads past the received data into whatever follows in raw->msg[]. drm_dp_sideband_parse_remote_i2c_read_ack() has the same flaw (noted with a /* TODO check */ comment since the code was introduced). Fix both functions by using a single combined check (idx + num_bytes > curlen) before each memcpy. Since num_bytes is u8, it is always >= 0, so this strictly subsumes the simpler idx > curlen form and no separate step is needed. [added missing fixes tag] | ||||
| CVE-2026-68278 | 1 Linux | 1 Linux Kernel | 2026-08-23 | 6.0 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/dp/mst: fix buffer overflows in sideband chunk accumulation drm_dp_sideband_append_payload() has three related bugs when processing device-provided sideband reply data: 1. Zero-length curchunk_len underflow: msg_len is a 6-bit field taken directly from the DP sideband header. If a device sends msg_len=0, curchunk_len is set to zero. The condition (curchunk_idx >= curchunk_len) is immediately true, and curchunk_len-1 wraps to 255 (u8 underflow). drm_dp_msg_data_crc4() reads 255 bytes from chunk[48], then memcpy() writes 255 bytes into msg[], both far out of bounds. 2. chunk[48] overflow: curchunk_len can reach 63 (6-bit field). chunk[] is only 48 bytes. Multi-iteration payload assembly appends 16-byte blocks until curchunk_idx reaches curchunk_len, writing up to 15 bytes past the end of chunk[] into msg[]. 3. msg[256] overflow: each chunk contributes (curchunk_len-1) bytes to msg[]. No check ensures curlen + (curchunk_len-1) stays within msg[256], so the memcpy can spill into adjacent struct fields. All three are reachable from any DP MST device that can forge sideband reply messages on a physical connection. | ||||
| CVE-2026-68277 | 1 Linux | 1 Linux Kernel | 2026-08-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/dp/mst: fix OOB reads on 2-byte fields in sideband reply parsers Three sideband reply parsers read 16-bit fields as: val = (raw->msg[idx] << 8) | (raw->msg[idx+1]); and check bounds only after the fact. When idx == raw->curlen, raw->msg[idx+1] reads one byte past the received message data into the following struct fields (curchunk_len, curchunk_idx, curlen). Affected functions: - drm_dp_sideband_parse_enum_path_resources_ack() full_payload_bw_number and avail_payload_bw_number fields - drm_dp_sideband_parse_allocate_payload_ack() allocated_pbn field - drm_dp_sideband_parse_query_payload_ack() allocated_pbn field Fix by using a single combined check (idx + 2 > curlen) before each 2-byte read. Since the check is strictly tighter than idx > curlen, no separate step is needed. [added fixes tag] | ||||
| CVE-2026-68255 | 1 Linux | 1 Linux Kernel | 2026-08-23 | 7.7 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/virtio: bound EDID block reads to the response buffer virtio_get_edid_block() validates the read offset only against the device-supplied resp->size field, never against the fixed-size resp->edid array. The EDID block index is driven by the device-supplied extension count, so a malicious virtio-gpu backend can advertise a large size together with a high block count and read far past the array into adjacent kernel memory, which is then surfaced in the parsed EDID (an out-of-bounds read / info leak). Also reject any read whose end exceeds the size of the edid array. Conforming EDID responses stay within the array and are unaffected. | ||||
| CVE-2026-68254 | 1 Linux | 1 Linux Kernel | 2026-08-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/i915/vrr: require valid min/max vfreq for VRR Ensure the EDID provided min/max vfreq are valid. Most scenarios are already covered (by coincidence) through the checks in intel_vrr_is_capable() and intel_vrr_is_in_range(), but be more explicit about it. At worst, a zero min_vfreq could lead to a division by zero in intel_vrr_compute_vmax(). Discovered using AI-assisted static analysis confirmed by Intel Product Security. (cherry picked from commit 1765cf59f517b02f3b0591fe5120930d08bddeb6) | ||||
| CVE-2026-68253 | 1 Linux | 1 Linux Kernel | 2026-08-23 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/i915/hdcp: check streams[] bounds before overflow The data->streams[] overflow check is done after the buffer overflow has already happened. Move the overflow check before the write. Side note, emitting a warning splat with a backtrace might be overkill here, but prefer not changing the behaviour other than not doing the overrun. Discovered using AI-assisted static analysis confirmed by Intel Product Security. (cherry picked from commit 9284ab3b6e776c315883ac2611283d263c9460fd) | ||||
| CVE-2026-68205 | 1 Linux | 1 Linux Kernel | 2026-08-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: v4l2-fwnode: Fix subdev owner overwritten in v4l2_async_register_subdev_sensor() The v4l2 helper v4l2_async_register_subdev_sensor() calls v4l2_async_register_subdev(), which is a macro that expands to __v4l2_async_register_subdev(sd,THIS_MODULE). Since the macro is expanded inside v4l2-fwnode.c, THIS_MODULE resolves to the v4l2-fwnode module rather than the sensor driver module that originally set sd->owner. When v4l2-fwnode is built-in, THIS_MODULE evaluates to NULL, which then overwrites the sensor driver's owner with NULL. This causes the problem that the sensor module's reference count is never incremented during async registration, so the module can be removed while the subdevice is still in use by a notifier (e.g., a CSI-2 receiver bridge driver). Fix this by renaming v4l2_async_register_subdev_sensor() to __v4l2_async_register_subdev_sensor() with an added explicit module argument and introducing a wrapper macro: #define v4l2_async_register_subdev_sensor(sd) \ __v4l2_async_register_subdev_sensor(sd, THIS_MODULE) This ensures the sensor driver module is properly referenced even when the sensor driver does not init the owner field before calling v4l2_async_register_subdev_sensor() and prevents premature module removal. | ||||
| CVE-2026-68202 | 1 Linux | 1 Linux Kernel | 2026-08-23 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: seq: close a re-opened queue timer in the destructor queue_delete() closes the queue timer, then frees it. snd_seq_timer_close() clears q->timer->timeri. snd_use_lock_sync() then drains borrowers, and snd_seq_timer_delete() frees q->timer. A borrower can re-open the timer inside that window. A SET_QUEUE_CLIENT that took a queueptr() use_lock reference before the queue was unlinked runs snd_seq_timer_open() after the close. Open refuses re-open only while timeri is set, and the close just cleared it, so it re-opens timeri. snd_seq_timer_delete() does not close that instance. Its snd_seq_timer_stop() is a no-op, because running was cleared first. So it frees q->timer with the instance still live. The queue is freed next. The instance stays on the global timer with callback_data pointing at the freed queue. A non-owner START on the unlocked queue arms it. The next tick derefs the freed queue in snd_seq_timer_interrupt(). Reachable by an unprivileged user with access to /dev/snd/seq. No CAP and no queue ownership required. Close any lingering instance in the destructor. There, ->timeri can no longer change: the queue is unlinked and all use_lock borrowers have drained, so no snd_seq_queue_use() can re-open it. Close it before clearing q->timer. snd_timer_close() waits for any in-flight snd_seq_timer_interrupt() to finish, and that callback still reads q->timer (via snd_seq_check_queue()), so q->timer must stay valid until it drains. | ||||
| CVE-2026-68198 | 1 Linux | 1 Linux Kernel | 2026-08-23 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath6kl: fix use-after-free in aggr_reset_state() The aggr_reset_state() function uses timer_delete() (non-synchronous) for the aggregation timer before proceeding to delete TID state and before the structure is freed by callers like aggr_module_destroy(). If the timer callback (aggr_timeout) is executing when aggr_reset_state() is called, the callback will continue to access aggr_conn fields like rx_tid[] and stat[] which may be freed immediately after by kfree(aggr_info->aggr_conn) in aggr_module_destroy(). Additionally, the timer callback can re-arm itself via mod_timer() while aggr_reset_state() is running, creating a more complex race condition. Use timer_delete_sync() instead to ensure any running timer callback has completed before returning. | ||||
| CVE-2026-68181 | 1 Linux | 1 Linux Kernel | 2026-08-23 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: mei: bus: access mei_device under device_lock on cleanup Fix couple of problems in mei_cl_bus_dev_release(): mei_cl_flush_queues() is running without lock. bus->file_list access after mei_dev_bus_put(bus) can become a use-after-free if this was the last reference to bus. Protect queues cleanup and WARN traversal by device lock there to avoid the concurrent access problems. Move WARN traversal before mei_dev_bus_put(bus). This file uses bus variable name for mei_device, adjust code of mei_cl_bus_dev_release() to use bus variable too. | ||||
| CVE-2026-68169 | 1 Linux | 1 Linux Kernel | 2026-08-23 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: pm: userspace: fix use-after-free in get_local_id In mptcp_pm_userspace_get_local_id(), the address entry is looked up under spinlock, but its id is read after dropping the lock. A concurrent deletion can free the entry between the unlock and the read, leading to UAF. The race window is narrow. It was reproduced only with a locally constructed stress test that repeatedly overlaps an MP_JOIN SYN with a MPTCP_PM_CMD_SUBFLOW_DESTROY request. However, the KASAN report below confirms that the race is reachable: [ 666.319376] BUG: KASAN: slab-use-after-free in mptcp_userspace_pm_get_local_id+0x1dc/0x1f0 [ 666.319386] Read of size 1 at addr ffff888124845610 by task swapper/0/0 ... [ 666.319401] Call Trace: [ 666.319405] <IRQ> [ 666.319408] dump_stack_lvl+0x53/0x70 [ 666.319412] print_address_description.constprop.0+0x2c/0x3b0 [ 666.319418] print_report+0xbe/0x2b0 [ 666.319421] ? mptcp_userspace_pm_get_local_id+0x1dc/0x1f0 [ 666.319423] kasan_report+0xce/0x100 [ 666.319426] ? mptcp_userspace_pm_get_local_id+0x1dc/0x1f0 [ 666.319429] mptcp_userspace_pm_get_local_id+0x1dc/0x1f0 [ 666.319433] mptcp_pm_get_local_id+0x371/0x440 ... [ 666.319821] Allocated by task 45539: [ 666.319844] kasan_save_stack+0x33/0x60 [ 666.319855] kasan_save_track+0x14/0x30 [ 666.319858] __kasan_kmalloc+0x8f/0xa0 [ 666.319863] __kmalloc_noprof+0x1e7/0x520 [ 666.319867] sock_kmalloc+0xdf/0x130 [ 666.319885] sock_kmemdup+0x1b/0x40 [ 666.319888] mptcp_userspace_pm_append_new_local_addr+0x261/0x500 [ 666.319910] mptcp_pm_nl_announce_doit+0x16a/0x610 ... [ 666.319967] Freed by task 45560: [ 666.319988] kasan_save_stack+0x33/0x60 [ 666.319991] kasan_save_track+0x14/0x30 [ 666.319994] kasan_save_free_info+0x3b/0x60 [ 666.319998] __kasan_slab_free+0x43/0x70 [ 666.320000] kfree+0x166/0x440 [ 666.320003] sock_kfree_s+0x1d/0x50 [ 666.320007] mptcp_userspace_pm_delete_local_addr.isra.0+0x157/0x200 [ 666.320011] mptcp_pm_nl_subflow_destroy_doit+0x51d/0xea0 Fix by copying the id into a local variable while still holding the lock, and use -1 as a "not found" sentinel. | ||||
| CVE-2026-68166 | 1 Linux | 1 Linux Kernel | 2026-08-23 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: userfaultfd: prevent registration of special VMAs Vova Tokarev says: userfaultfd allows registration on shadow stack VMAs. With userfaultfd access, you can register on the shadow stack, discard a page ... and inject a page with chosen return addresses via UFFDIO_COPY. Update vma_can_userfault() to reject VM_SHADOW_STACK. While on it, also reject VM_SPECIAL so that if a driver would implement vm_uffd_ops, it wouldn't be possible to register special VMAs with userfaultfd. Since VM_SPECIAL includes VM_DONTEXPAND which is set but hugetlb, exclude hugetlb VMAs from the check for VM_SPECIAL. | ||||