| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in the web interface of Cisco Industrial Network Director could allow an unauthenticated, remote attacker to conduct a reflected cross-site scripting (XSS) attack against an affected system. More Information: CSCvd25405. Known Affected Releases: 1.1(0.176). |
| A vulnerability in the feature-license management functionality of Cisco Firepower System Software could allow an unauthenticated, remote attacker to bypass URL filters that have been configured for an affected device. More Information: CSCvb16413. Known Affected Releases: 6.0.1 6.1.0 6.2.0 6.2.1. Known Fixed Releases: 6.2.1 6.2.0.1 6.1.0.2. |
| A vulnerability in the gRPC code of Cisco IOS XR Software for Cisco Network Convergence System (NCS) 5500 Series Routers could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition when the emsd service stops. The vulnerability is due to the software's inability to process HTTP/2 packets. An attacker could exploit this vulnerability by sending a malformed HTTP/2 frame to the affected device. A successful exploit could allow the attacker to create a DoS condition when the emsd service stops. Cisco Bug IDs: CSCvb99388. |
| A vulnerability in 802.11 association request frame processing for the Cisco Aironet 1560, 2800, and 3800 Series Access Points could allow an unauthenticated, Layer 2 radio frequency (RF) adjacent attacker to cause the Access Point (AP) to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to insufficient frame validation of the 802.11 association request. An attacker could exploit this vulnerability by sending a malformed 802.11 association request to the targeted device. An exploit could allow the attacker to cause the AP to reload, resulting in a DoS condition while the AP is reloading. This vulnerability affects the following Cisco products running either the Lightweight AP Software or Mobility Express image: Aironet 1560 Series Access Points, Aironet 2800 Series Access Points, Aironet 3800 Series Access Points. Note: The Cisco Aironet 1560 Series Access Point device is supported as of release 8.3.112.0. Cisco Bug IDs: CSCve12189. |
| A vulnerability in the AutoVNF VNFStagingView class of Cisco Ultra Services Framework could allow an unauthenticated, remote attacker to execute a relative path traversal attack, enabling an attacker to read sensitive files on the system. More Information: CSCvc76662. Known Affected Releases: 21.0.0. |
| A vulnerability in the implementation of Session Initiation Protocol (SIP) functionality in Cisco Small Business SPA50x, SPA51x, and SPA52x Series IP Phones could allow an unauthenticated, remote attacker to cause an affected device to become unresponsive, resulting in a denial of service (DoS) condition. The vulnerability is due to the improper handling of SIP request messages by an affected device. An attacker could exploit this vulnerability by using formatted specifiers in a SIP payload that is sent to an affected device. A successful exploit could allow the attacker to cause the affected device to become unresponsive, resulting in a DoS condition that persists until the device is restarted manually. This vulnerability affects Cisco Small Business SPA50x, SPA51x, and SPA52x Series IP Phones that are running firmware release 7.6.2SR1 or earlier. Cisco Bug IDs: CSCvc63986. |
| A vulnerability in the restricted shell of the Cisco Identity Services Engine (ISE) that is accessible via SSH could allow an authenticated, local attacker to run arbitrary CLI commands with elevated privileges. The vulnerability is due to incomplete input validation of the user input for CLI commands issued at the restricted shell. An attacker could exploit this vulnerability by authenticating to the targeted device and executing commands that could lead to elevated privileges. An attacker would need valid user credentials to the device to exploit this vulnerability. The vulnerability affects the following Cisco Identity Services Engine (ISE) products running Release 1.4, 2.0, 2.0.1, 2.1.0: ISE, ISE Express, ISE Virtual Appliance. Cisco Bug IDs: CSCve74916. |
| A vulnerability in the Cisco FindIT Network Discovery Utility could allow an authenticated, local attacker to perform a DLL preloading attack, potentially causing a partial impact to device availability, confidentiality, and integrity. The vulnerability is due to the application loading a malicious copy of a specific, nondefined DLL file instead of the DLL file it was expecting. An attacker could exploit this vulnerability by placing an affected DLL within the search path of the host system. An exploit could allow the attacker to load a malicious DLL file into the system, thus partially compromising confidentiality, integrity, and availability on the device. Cisco Bug IDs: CSCve89785. |
| A vulnerability in the HTTP web interface for Cisco Wide Area Application Services (WAAS) could allow an unauthenticated, remote attacker to cause an HTTP Application Optimization (AO) related process to restart, causing a partial denial of service (DoS) condition. The vulnerability is due to lack of input validation of user-supplied input parameters within an HTTP request. An attacker could exploit this vulnerability by sending a crafted HTTP request through the targeted device. An exploit could allow the attacker to cause a DoS condition due to a process unexpectedly restarting. The WAAS could drop traffic during the brief time the process is restarting. Cisco Bug IDs: CSCvc63048. |
| A vulnerability in the web framework of Cisco WebEx Meetings Server could allow an unauthenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the web interface of an affected system. The vulnerability is due to insufficient input validation of some parameters that are passed to the web server of the affected system. An attacker could exploit this vulnerability by convincing a user to follow a malicious link or by intercepting a user request and injecting malicious code into the request. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected web interface or allow the attacker to access sensitive browser-based information. Cisco Bug IDs: CSCve96608. |
| A vulnerability in the Web Admin Interface of Cisco Meeting Server could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to insufficient bound checks performed by the affected software. An attacker could exploit this vulnerability by sending a malicious HTTP packet to the affected system. A successful exploit could allow the attacker to cause a reload of the Web Admin Server. Cisco Bug IDs: CSCve89149. |
| A vulnerability in the Cisco Unified Computing System (UCS) Manager, Cisco Firepower 4100 Series Next-Generation Firewall (NGFW), and Cisco Firepower 9300 Security Appliance could allow an authenticated, local attacker to obtain root shell privileges on the device, aka Command Injection. The vulnerability is due to improper validation of string input in the shell application. An attacker could exploit this vulnerability through the use of malicious commands. A successful exploit could allow the attacker to obtain root shell privileges on the device. Cisco Bug IDs: CSCvf20741, CSCvf60078. |
| A vulnerability in the implementation of the Locator/ID Separation Protocol (LISP) in Cisco IOS XE 3.2 through 16.5 could allow an unauthenticated, remote attacker using an x tunnel router to bypass authentication checks performed when registering an Endpoint Identifier (EID) to a Routing Locator (RLOC) in the map server/map resolver (MS/MR). The vulnerability is due to a logic error introduced via a code regression for the affected software. An attacker could exploit this vulnerability by sending specific valid map-registration requests, which will be accepted by the MS/MR even if the authentication keys do not match, to the affected software. A successful exploit could allow the attacker to inject invalid mappings of EIDs to RLOCs in the MS/MR of the affected software. This vulnerability affects Cisco devices that are configured with LISP acting as an IPv4 or IPv6 map server. This vulnerability affects Cisco IOS XE Software release trains 3.9E and Everest 16.4. Cisco Bug IDs: CSCvc18008. |
| A vulnerability in SSL traffic decryption for Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause depletion of system memory, aka a Firepower Detection Engine SSL Decryption Memory Consumption Denial of Service vulnerability. If this memory leak persists over time, a denial of service (DoS) condition could develop because traffic can cease to be forwarded through the device. The vulnerability is due to an error in how the Firepower Detection Snort Engine handles SSL traffic decryption and notifications to and from the Adaptive Security Appliance (ASA) handler. An attacker could exploit this vulnerability by sending a steady stream of malicious Secure Sockets Layer (SSL) traffic through the device. An exploit could allow the attacker to cause a DoS condition when the device runs low on system memory. This vulnerability affects Cisco Firepower Threat Defense (FTD) Software Releases 6.0.1 and later, running on any of the following Cisco products: Adaptive Security Appliance (ASA) 5500-X Series Next-Generation Firewalls, Firepower 2100 Series Security Appliances, Firepower 4100 Series Security Appliances, Firepower 9300 Series Security Appliances. Cisco Bug IDs: CSCve02069. |
| A Denial of Service Vulnerability in 802.11 ingress connection authentication handling for the Cisco Mobility Express 2800 and 3800 Access Points (APs) could allow an unauthenticated, adjacent attacker to cause authentication to fail. Affected Products: This vulnerability affects Cisco Mobility Express 2800 Series and 3800 Series Access Points when configured in local mode in 40 MHz. More Information: CSCvb33575. Known Affected Releases: 8.2(121.12) 8.4(1.82). Known Fixed Releases: 8.2(131.2) 8.2(131.3) 8.2(131.4) 8.2(141.0) 8.3(104.53) 8.3(104.54) 8.4(1.80) 8.4(1.85). |
| A vulnerability in the routine that loads DLL files in Cisco Meeting App for Windows could allow an authenticated, local attacker to run an executable file with privileges equivalent to those of Cisco Meeting App. The vulnerability is due to incomplete input validation of the path name for DLL files before they are loaded. An attacker could exploit this vulnerability by installing a crafted DLL file in a specific system directory. A successful exploit could allow the attacker to execute commands on the underlying Microsoft Windows host with privileges equivalent to those of Cisco Meeting App. The attacker would need valid user credentials to exploit this vulnerability. Cisco Bug IDs: CSCvd77907. |
| A vulnerability in the packet processing code of Cisco IOS Software for Cisco Aironet Access Points could allow an unauthenticated, adjacent attacker to retrieve content from memory on an affected device, which could lead to the disclosure of confidential information. The vulnerability is due to insufficient condition checks that are performed by the affected device when the device adds padding to egress packets. An attacker could exploit this vulnerability by sending a crafted IP packet to an affected device. A successful exploit could allow the attacker to retrieve content from memory on the affected device, which could lead to the disclosure of confidential information. Cisco Bug IDs: CSCvc21581. |
| A vulnerability in the CLI of Cisco Firepower Extensible Operating System (FXOS) and NX-OS System Software could allow an authenticated, local attacker to perform a command injection attack. The vulnerability is due to insufficient input validation of command arguments to the CLI parser. An attacker could exploit this vulnerability by injecting crafted command arguments into a vulnerable CLI command. An exploit could allow the attacker to execute arbitrary commands at the user's privilege level. On products that support multiple virtual device contexts (VDCs), this vulnerability could allow the attacker to execute commands at the user's privilege level outside the user's environment. This vulnerability affects the following products running Cisco FXOS or NX-OS System Software: Firepower 4100 Series Next-Generation Firewall, Firepower 9300 Security Appliance, Multilayer Director Switches, Nexus 1000V Series Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5000 Series Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, Unified Computing System Manager. Cisco Bug IDs: CSCve51700, CSCve93833, CSCve93860, CSCve93863, CSCve93864, CSCve93880. |
| A vulnerability in the REST API of the web-based user interface (web UI) of Cisco IOS XE 3.1 through 16.5 could allow an unauthenticated, remote attacker to bypass authentication to the REST API of the web UI of the affected software. The vulnerability is due to insufficient input validation for the REST API of the affected software. An attacker could exploit this vulnerability by sending a malicious API request to an affected device. A successful exploit could allow the attacker to bypass authentication and gain access to the web UI of the affected software. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS XE Software, if the HTTP Server feature is enabled for the device. The newly redesigned, web-based administration UI was introduced in the Denali 16.2 Release of Cisco IOS XE Software. This vulnerability does not affect the web-based administration UI in earlier releases of Cisco IOS XE Software. Cisco Bug IDs: CSCuz46036. |
| A vulnerability in the Cisco Network Plug and Play application of Cisco IOS 12.4 through 15.6 and Cisco IOS XE 3.3 through 16.4 could allow an unauthenticated, remote attacker to gain unauthorized access to sensitive data by using an invalid certificate. The vulnerability is due to insufficient certificate validation by the affected software. An attacker could exploit this vulnerability by supplying a crafted certificate to an affected device. A successful exploit could allow the attacker to conduct man-in-the-middle attacks to decrypt confidential information on user connections to the affected software. Cisco Bug IDs: CSCvc33171. |
