| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A flaw was found in the X.Org X server. This integer underflow vulnerability, specifically in the XKB compatibility map handling, allows an attacker with local or remote X11 server access to trigger a buffer read overrun. This can lead to memory-safety violations and potentially a denial of service (DoS) or other severe impacts. |
| A flaw in GnuTLS DTLS handshake parsing allows malformed fragments with zero length and non-zero offset, leading to an integer underflow during reassembly and resulting in an out-of-bounds read. This issue is remotely exploitable and may cause information disclosure or denial of service. |
| Heap-based buffer overflow in Windows Common Log File System Driver allows an authorized attacker to elevate privileges locally. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Reject unknown opcodes before ICRC processing
Even after applying commit 7244491dab34 ("RDMA/rxe: Validate pad and ICRC
before payload_size() in rxe_rcv"), a single unauthenticated UDP packet
can still trigger panic. That patch handled payload_size() underflow only
for valid opcodes with short packets, not for packets carrying an unknown
opcode. The unknown-opcode OOB read described below predates that commit
and reaches back to the initial Soft RoCE driver.
The check added there reads
pkt->paylen < header_size(pkt) + bth_pad(pkt) + RXE_ICRC_SIZE
where header_size(pkt) expands to rxe_opcode[pkt->opcode].length. The
rxe_opcode[] array has 256 entries but is only populated for defined IB
opcodes; any other entry (for example opcode 0xff) is zero-initialized, so
length == 0 and the check degenerates to
pkt->paylen < 0 + bth_pad(pkt) + RXE_ICRC_SIZE
which does not constrain pkt->paylen enough. rxe_icrc_hdr() then computes
rxe_opcode[pkt->opcode].length - RXE_BTH_BYTES
which underflows when length == 0 and passes a huge value to rxe_crc32(),
causing an out-of-bounds read of the skb payload.
Reproduced on v7.0-rc7 with that fix applied, QEMU/KVM with
CONFIG_RDMA_RXE=y and CONFIG_KASAN=y, after
rdma link add rxe0 type rxe netdev eth0
A single 48-byte UDP packet to port 4791 with BTH opcode=0xff and
QPN=IB_MULTICAST_QPN triggers:
BUG: KASAN: slab-out-of-bounds in crc32_le+0x115/0x170
Read of size 1 at addr ...
The buggy address is located 0 bytes to the right of
allocated 704-byte region
Call Trace:
crc32_le+0x115/0x170
rxe_icrc_hdr.isra.0+0x226/0x300
rxe_icrc_check+0x13f/0x3a0
rxe_rcv+0x6e1/0x16e0
rxe_udp_encap_recv+0x20a/0x320
udp_queue_rcv_one_skb+0x7ed/0x12c0
Subsequent packets with the same shape fault on unmapped memory and panic
the kernel. The trigger requires only module load and "rdma link add"; no
QP, no connection, and no authentication.
Fix this by rejecting packets whose opcode has no rxe_opcode[] entry,
detected via the zero mask or zero length, before any length arithmetic
runs. |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid10: fix deadlock with check operation and nowait requests
When an array check is running it will raise the barrier at which point
normal requests will become blocked and increment the nr_pending value to
signal there is work pending inside of wait_barrier(). NOWAIT requests
do not block and so will return immediately with an error, and additionally
do not increment nr_pending in wait_barrier(). Upstream change commit
43806c3d5b9b ("raid10: cleanup memleak at raid10_make_request") added a
call to raid_end_bio_io() to fix a memory leak when NOWAIT requests hit
this condition. raid_end_bio_io() eventually calls allow_barrier() and
it will unconditionally do an atomic_dec_and_test(&conf->nr_pending) even
though the corresponding increment on nr_pending didn't happen in the
NOWAIT case.
This can be easily seen by starting a check operation while an application
is doing nowait IO on the same array. This results in a deadlocked state
due to nr_pending value underflowing and so the md resync thread gets stuck
waiting for nr_pending to == 0.
Output of r10conf state of the array when we hit this condition:
crash> struct r10conf
barrier = 1,
nr_pending = {
counter = -41
},
nr_waiting = 15,
nr_queued = 0,
Example of md_sync thread stuck waiting on raise_barrier() and other
requests stuck in wait_barrier():
md1_resync
[<0>] raise_barrier+0xce/0x1c0
[<0>] raid10_sync_request+0x1ca/0x1ed0
[<0>] md_do_sync+0x779/0x1110
[<0>] md_thread+0x90/0x160
[<0>] kthread+0xbe/0xf0
[<0>] ret_from_fork+0x34/0x50
[<0>] ret_from_fork_asm+0x1a/0x30
kworker/u1040:2+flush-253:4
[<0>] wait_barrier+0x1de/0x220
[<0>] regular_request_wait+0x30/0x180
[<0>] raid10_make_request+0x261/0x1000
[<0>] md_handle_request+0x13b/0x230
[<0>] __submit_bio+0x107/0x1f0
[<0>] submit_bio_noacct_nocheck+0x16f/0x390
[<0>] ext4_io_submit+0x24/0x40
[<0>] ext4_do_writepages+0x254/0xc80
[<0>] ext4_writepages+0x84/0x120
[<0>] do_writepages+0x7a/0x260
[<0>] __writeback_single_inode+0x3d/0x300
[<0>] writeback_sb_inodes+0x1dd/0x470
[<0>] __writeback_inodes_wb+0x4c/0xe0
[<0>] wb_writeback+0x18b/0x2d0
[<0>] wb_workfn+0x2a1/0x400
[<0>] process_one_work+0x149/0x330
[<0>] worker_thread+0x2d2/0x410
[<0>] kthread+0xbe/0xf0
[<0>] ret_from_fork+0x34/0x50
[<0>] ret_from_fork_asm+0x1a/0x30 |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Validate pad and ICRC before payload_size() in rxe_rcv
rxe_rcv() currently checks only that the incoming packet is at least
header_size(pkt) bytes long before payload_size() is used.
However, payload_size() subtracts both the attacker-controlled BTH pad
field and RXE_ICRC_SIZE from pkt->paylen:
payload_size = pkt->paylen - offset[RXE_PAYLOAD] - bth_pad(pkt)
- RXE_ICRC_SIZE
This means a short packet can still make payload_size() underflow even
if it includes enough bytes for the fixed headers. Simply requiring
header_size(pkt) + RXE_ICRC_SIZE is not sufficient either, because a
packet with a forged non-zero BTH pad can still leave payload_size()
negative and pass an underflowed value to later receive-path users.
Fix this by validating pkt->paylen against the full minimum length
required by payload_size(): header_size(pkt) + bth_pad(pkt) +
RXE_ICRC_SIZE. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915/gt: fix refcount underflow in intel_engine_park_heartbeat
A use-after-free / refcount underflow is possible when the heartbeat
worker and intel_engine_park_heartbeat() race to release the same
engine->heartbeat.systole request.
The heartbeat worker reads engine->heartbeat.systole and calls
i915_request_put() on it when the request is complete, but clears
the pointer in a separate, non-atomic step. Concurrently, a request
retirement on another CPU can drop the engine wakeref to zero, triggering
__engine_park() -> intel_engine_park_heartbeat(). If the heartbeat
timer is pending at that point, cancel_delayed_work() returns true and
intel_engine_park_heartbeat() reads the stale non-NULL systole pointer
and calls i915_request_put() on it again, causing a refcount underflow:
```
<4> [487.221889] Workqueue: i915-unordered engine_retire [i915]
<4> [487.222640] RIP: 0010:refcount_warn_saturate+0x68/0xb0
...
<4> [487.222707] Call Trace:
<4> [487.222711] <TASK>
<4> [487.222716] intel_engine_park_heartbeat.part.0+0x6f/0x80 [i915]
<4> [487.223115] intel_engine_park_heartbeat+0x25/0x40 [i915]
<4> [487.223566] __engine_park+0xb9/0x650 [i915]
<4> [487.223973] ____intel_wakeref_put_last+0x2e/0xb0 [i915]
<4> [487.224408] __intel_wakeref_put_last+0x72/0x90 [i915]
<4> [487.224797] intel_context_exit_engine+0x7c/0x80 [i915]
<4> [487.225238] intel_context_exit+0xf1/0x1b0 [i915]
<4> [487.225695] i915_request_retire.part.0+0x1b9/0x530 [i915]
<4> [487.226178] i915_request_retire+0x1c/0x40 [i915]
<4> [487.226625] engine_retire+0x122/0x180 [i915]
<4> [487.227037] process_one_work+0x239/0x760
<4> [487.227060] worker_thread+0x200/0x3f0
<4> [487.227068] ? __pfx_worker_thread+0x10/0x10
<4> [487.227075] kthread+0x10d/0x150
<4> [487.227083] ? __pfx_kthread+0x10/0x10
<4> [487.227092] ret_from_fork+0x3d4/0x480
<4> [487.227099] ? __pfx_kthread+0x10/0x10
<4> [487.227107] ret_from_fork_asm+0x1a/0x30
<4> [487.227141] </TASK>
```
Fix this by replacing the non-atomic pointer read + separate clear with
xchg() in both racing paths. xchg() is a single indivisible hardware
instruction that atomically reads the old pointer and writes NULL. This
guarantees only one of the two concurrent callers obtains the non-NULL
pointer and performs the put, the other gets NULL and skips it.
(cherry picked from commit 13238dc0ee4f9ab8dafa2cca7295736191ae2f42) |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_ncm: validate minimum block_len in ncm_unwrap_ntb()
The block_len read from the host-supplied NTB header is checked against
ntb_max but has no lower bound. When block_len is smaller than
opts->ndp_size, the bounds check of:
ndp_index > (block_len - opts->ndp_size)
will underflow producing a huge unsigned value that ndp_index can never
exceed, defeating the check entirely.
The same underflow occurs in the datagram index checks against block_len
- opts->dpe_size. With those checks neutered, a malicious USB host can
choose ndp_index and datagram offsets that point past the actual
transfer, and the skb_put_data() copies adjacent kernel memory into the
network skb.
Fix this by rejecting block lengths that cannot hold at least the NTB
header plus one NDP. This will make block_len - opts->ndp_size and
block_len - opts->dpe_size both well-defined.
Commit 8d2b1a1ec9f5 ("CDC-NCM: avoid overflow in sanity checking") fixed
a related class of issues on the host side of NCM. |
| In the Linux kernel, the following vulnerability has been resolved:
erofs: fix unsigned underflow in z_erofs_lz4_handle_overlap()
Some crafted images can have illegal (!partial_decoding &&
m_llen < m_plen) extents, and the LZ4 inplace decompression path
can be wrongly hit, but it cannot handle (outpages < inpages)
properly: "outpages - inpages" wraps to a large value and
the subsequent rq->out[] access reads past the decompressed_pages
array.
However, such crafted cases can correctly result in a corruption
report in the normal LZ4 non-inplace path.
Let's add an additional check to fix this for backporting.
Reproducible image (base64-encoded gzipped blob):
H4sIAJGR12kCA+3SPUoDQRgG4MkmkkZk8QRbRFIIi9hbpEjrHQI5ghfwCN5BLCzTGtLbBI+g
dilSJo1CnIm7GEXFxhT6PDDwfrs73/ywIQD/1ePD4r7Ou6ETsrq4mu7XcWfj++Pb58nJU/9i
PNtbjhan04/9GtX4qVYc814WDqt6FaX5s+ZwXXeq52lndT6IuVvlblytLMvh4Gzwaf90nsvz
2DF/21+20T/ldgp5s1jXRaN4t/8izsy/OUB6e/Qa79r+JwAAAAAAAL52vQVuGQAAAP6+my1w
ywAAAAAAAADwu14ATsEYtgBQAAA=
$ mount -t erofs -o cache_strategy=disabled foo.erofs /mnt
$ dd if=/mnt/data of=/dev/null bs=4096 count=1 |
| MediaArea MediaInfoLib LXF parsing heap-based buffer overflow vulnerability |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: avoid per-cpu hold underflow in aa_get_buffer
When aa_get_buffer() pulls from the per-cpu list it unconditionally
decrements cache->hold. If hold reaches 0 while count is still non-zero,
the unsigned decrement wraps to UINT_MAX. This keeps hold non-zero for a
very long time, so aa_put_buffer() never returns buffers to the global
list, which can starve other CPUs and force repeated kmalloc(aa_g_path_max)
allocations.
Guard the decrement so hold never underflows. |
| In the Linux kernel, the following vulnerability has been resolved:
fat: avoid parent link count underflow in rmdir
Corrupted FAT images can leave a directory inode with an incorrect
i_nlink (e.g. 2 even though subdirectories exist). rmdir then
unconditionally calls drop_nlink(dir) and can drive i_nlink to 0,
triggering the WARN_ON in drop_nlink().
Add a sanity check in vfat_rmdir() and msdos_rmdir(): only drop the
parent link count when it is at least 3, otherwise report a filesystem
error. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conntrack_h323: check for zero length in DecodeQ931()
In DecodeQ931(), the UserUserIE code path reads a 16-bit length from
the packet, then decrements it by 1 to skip the protocol discriminator
byte before passing it to DecodeH323_UserInformation(). If the encoded
length is 0, the decrement wraps to -1, which is then passed as a
large value to the decoder, leading to an out-of-bounds read.
Add a check to ensure len is positive after the decrement. |
| SWUpdate contains an integer underflow vulnerability in the multipart upload parser in mongoose_multipart.c that allows unauthenticated attackers to cause a denial of service by sending a crafted HTTP POST request to /upload with a malformed multipart boundary and controlled TCP stream timing. Attackers can trigger an integer underflow in the mg_http_multipart_continue_wait_for_chunk() function when the buffer length falls within a specific range, causing an out-of-bounds heap read past the allocated receive buffer to a local IPC socket. |
| OpenLDAP Lightning Memory-Mapped Database (LMDB) versions up to and including 0.9.14, prior to commit 8e1fda8, contain a heap buffer underflow in the readline() function of mdb_load. When processing malformed input containing an embedded NUL byte, an unsigned offset calculation can underflow and cause an out-of-bounds read of one byte before the allocated heap buffer. This can cause mdb_load to crash, leading to a limited denial-of-service condition. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Fix signedness bug in sdma_v4_0_process_trap_irq()
The "instance" variable needs to be signed for the error handling to work. |
| An integer underflow in the volxlate function in Netatalk 3.0.0 through 4.4.2 allows a local privileged user to obtain limited information, modify limited data, or cause a minor service disruption via crafted volume translation input. |
| An integer underflow in dsi_writeinit() in Netatalk 1.5.0 through 4.4.2 allows a remote unauthenticated attacker to cause a denial of service via a crafted DSI write request. |
| In the Linux kernel, the following vulnerability has been resolved:
net/x25: Fix overflow when accumulating packets
Add a check to ensure that `x25_sock.fraglen` does not overflow.
The `fraglen` also needs to be resetted when purging `fragment_queue` in
`x25_clear_queues()`. |
| libheif is a HEIF and AVIF file format decoder and encoder. In versions 1.21.2 and below, a crafted 792-byte HEIF sequence file with samples_per_chunk=0 in the stsc box causes an unsigned integer underflow in the Chunk constructor (m_last_sample = 0 + 0 - 1 = UINT32_MAX), mapping all samples to an empty chunk and resulting in a denial of service. When any sample is accessed, the library reads from index 0 of an empty std::vector, causing a guaranteed SEGV (null-page read). The file parses successfully without producing an error; the crash occurs on the first frame access. This issue has been fixed in version 1.22.0. |
