| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An improper access control vulnerability exists in the web management interface of PaperCut MF and PaperCut NG. Under specific conditions, unauthenticated remote requests targeting administrative functions can trigger backend actions prior to the completion of access validation checks. This allows an unauthenticated remote attacker to modify certain system configurations. |
| A flaw was found in the keycloak-services component of Keycloak. This issue is an incomplete fix for CVE-2026-9798, where brute-force protection checks were added to the Client-Initiated Backchannel Authentication (CIBA) initiation handler but were omitted from the token redemption handler. This allows an attacker with valid client credentials to obtain access and refresh tokens for a user account that has been locked due to brute-force protection, provided the authentication request was started before the lockout occurred and was approved by the user. |
| Improper Authentication vulnerability in Apache Camel Platform HTTP Main component.
This issue affects Apache Camel: from 4.8.0 before 4.22.0.
The camel-main embedded HTTP server can protect its endpoints with JWT authentication, configured through authenticationEnabled together with the JWT keystore properties. JWTAuthenticationConfigurer.buildJwtOptions returned null when neither jwtIssuer nor jwtAudience was configured, and the caller then skipped the JWTAuthOptions.setJWTOptions call entirely, so the Vert.x JWTAuth instance was built from the keystore alone. The result was that inbound tokens were checked only for signature and expiry: the iss and aud claims were not validated at all. Nothing signalled this - the server started normally and reported no warning - so a deployment configured the documented way silently enforced less than the operator believed it had enabled, and the component documentation itself presented signature and expiry checking as the default with issuer and audience as an optional extra. Both the application server and the management server were affected, because the omission was in each of the two configureAuthentication paths. Any unexpired token signed by any key the configured keystore trusts was therefore accepted, regardless of which issuer minted it or which audience it was intended for. How far that reaches depends on the trust set of the keystore: where the signing key belongs to a shared or multi-tenant identity provider, a token legitimately issued for an entirely different audience is accepted, while a keystore holding a dedicated signer narrows it to reuse of tokens minted for other services within the same trust domain. The jwtIssuer and jwtAudience options did not exist before 4.21.0, so on earlier releases there was no supported way to have these claims enforced at all.
Users are recommended to upgrade to version 4.22.0, which fixes the issue. From 4.22.0 the server refuses to start when a JWT keystore is configured but neither jwtIssuer nor jwtAudience is set, naming the properties involved, and a deployment that genuinely wants signature and expiry validation only must say so explicitly with the new jwtAllowMissingIssuerAndAudience option, which defaults to false. This behaviour is fixed only on 4.22.0. The 4.14.9 and 4.18.4 releases do not change the default: they add the jwtIssuer and jwtAudience options so that operators on those maintenance lines can enforce the claims by configuration, and an installation that upgrades to 4.14.9 or 4.18.4 without also setting at least one of those two properties is still accepting any unexpired token signed by a trusted key. Users on 4.14.x or 4.18.x should therefore upgrade to 4.14.9 or 4.18.4 and then set jwtIssuer, jwtAudience, or both. Releases from 4.8.0 up to and including 4.21.x offer no way to enforce these claims and should be moved to a version that does. Independently of version, restrict the JWT keystore to the smallest possible trust set - ideally a signer dedicated to this service rather than a shared identity-provider key - and where a gateway already validates issuer and audience in front of the server, ensure it cannot be bypassed.
Notes:
The JIRA ticket: https://issues.apache.org/jira/browse/CAMEL-24281 refers to the various commits that resolved the issue, and has more details.
The fail-closed guard could not be backported. The jwtIssuer and jwtAudience options were themselves only introduced in 4.21.0 by CAMEL-23525, so on camel-4.18.x and camel-4.14.x there was nothing an operator could set to satisfy the requirement and the guard would have broken every JWT deployment on those branches with no remedy available. |
| An improper authentication vulnerability in HiveServer2 SAML bearer-token validation in Apache Hive 4.0.0 through 4.2.0 (and later unreleased branches) on deployments using HTTP transport with hive.server2.authentication=SAML allows an unauthenticated network attacker to authenticate as an arbitrary Hive user and obtain an authenticated HiveServer2 session via a forged Authorization: Bearer token sent to the /cliservice HTTP endpoint. Users are recommended to upgrade to 4.2.1 version that includes the fix for this issue.
Access / authorization required: No Hive credentials, SAML IdP login, or knowledge of the server signing secret is required. The attacker only needs network reachability to the HiveServer2 HTTP port (typically /cliservice), directly or through a reverse proxy such as Apache Knox that forwards unauthenticated requests to HS2. The instance must have SAML authentication enabled in HTTP mode. Deployments where Knox handles SSO and HiveServer2 uses LDAP/Kerberos (not native SAML mode) are not affected by this specific issue. |
| A logic vulnerability (fail-open condition) has been identified within the Metasploit Framework's JSON-RPC web service interface. When an exception occurs during the database health check (db.check) and the environment variable MSF_WS_JSON_RPC_API_TOKEN is not explicitly set, the application resets the internal state flag msf.auth_initialized to false. The ApiToken Warden authentication strategy misinterprets this false value as an indicator that authentication is not initialized or required, thereby granting unauthenticated local access to the JSON-RPC request dispatcher. |
| Punk::Plugin::TOTP versions before 0.05 for Perl accept another account's recovery code at the two-factor challenge because totp_use_recovery compares user identifiers numerically.
The helper searches the recovery model for the submitted code's digest alone, across every user's rows, so the ownership test that follows is the only thing binding a code to the account it was issued to. That test compares the row's user_id with the challenged user's id through Perl's integer coercion, and an identifier with no leading digits coerces to zero, so any two of them compare equal. User models keyed on a username, an email address or a UUID hit that case, and a numeric key compares as intended.
The challenge route feeds a submitted value to the helper once TOTP verification fails, so an attacker who knows a victim's password and holds a recovery code of their own passes the victim's second factor. |
| rclone before 1.75.0 mounts the pprof debug handler as its own router route, bypassing the fail-closed authentication rule in the main handler. Attackers can access the /debug/pprof/cmdline endpoint unauthenticated to retrieve the full process argv including backend credentials. |
| An insecure deserialization vulnerability in vsDesk allows a remote attacker to gain unauthorized administrative access. By manipulating application configuration data, an attacker can force the system to authenticate against an arbitrary LDAP server and provision a new administrative account.
Apply patch from vendor https://vsdesk.ru/ . Versions 14.0402 and on have the patch. |
| Lemonldap::NG::Portal versions from 2.0.0 before 2.16.9, from 2.17.0 before 2.21.5, from 2.22.0 before 2.23.3 for Perl allow authentication bypass via an OAuth2 state parameter stored as an SSO session in the GitHub and LinkedIn backends.
Before redirecting to the identity provider, extractFormInfo() creates the state session with the positional call `getApacheSession( undef, 1, 0, 'GitHubState' )`. getApacheSession() takes a session id followed by a named argument hash, so the trailing arguments become that hash, `kind` defaults to SSO, and the state is written to the global session storage as a regular SSO session. Its identifier is handed to the unauthenticated visitor as the state parameter of the redirection URL.
Any visitor who reaches the GitHub or LinkedIn endpoint can replay that identifier as a session cookie and obtain a valid SSO session without authenticating. The session holds neither _user nor authenticationLevel, which the shipped bootstrap configuration accepts because it grants virtual hosts a "default => accept" access rule; deployments whose rules test the user or require an authentication level are less exposed. Only configurations with the GitHub or LinkedIn authentication module enabled are affected. |
| Authentication bypass by primary weakness vulnerability in Universal Software Inc. E-Municipality allows Exploitation of Trusted Identifiers.
This issue affects E-Municipality: from 20251127 before 20260204. |
| Re-pairing with a legitimate device can use a lower security level than
previous making brute-forcing the LTK easier. See V4 in the BLERP paper linked below. |
| Passkey entry Bluetooth LE legacy pairing can be bypassed in the RS9116W and SiWx917 by manipulating the temporary key value.
See vulnerability B-E3 in the related paper below. |
| In sshd in OpenSSH before 10.5, the restrict keyword (in authorized_keys) was supposed to be applicable to tunnel forwarding but was not. |
| A flaw was found in Keycloak, an open-source identity and access management solution. When a user account is temporarily locked due to repeated failed login attempts, an attacker with valid client credentials can exploit the Client-Initiated Backchannel Authentication (CIBA) flow to bypass this brute-force protection. This allows continued authentication attempts and token issuance even when the account should be locked, potentially enabling further unauthorized access attempts. |
| User authentication with username and password credentials is ineffective in OpenText (Micro Focus) Visual COBOL, COBOL Server, Enterprise Developer, and Enterprise Server (including product variants such as Enterprise Test Server), versions 7.0 patch updates 19 and 20, 8.0 patch updates 8 and 9, and 9.0 patch update 1, when LDAP-based authentication is used with certain configurations. When the vulnerability is active, authentication succeeds with any valid username, regardless of whether the password is correct; it may also succeed with an invalid username (and any password). This allows an attacker with access to the product to impersonate any user.
Mitigations: The issue is corrected in the upcoming patch update for each affected product. Product overlays and workaround instructions are available through OpenText Support. The vulnerable configurations are believed to be uncommon.
Administrators can test for the vulnerability in their installations by attempting to sign on to a Visual COBOL or Enterprise Server component such as ESCWA using a valid username and incorrect password. |
| Dell Client Platform BIOS contains an Authentication Bypass by Primary Weakness vulnerability. An unauthenticated attacker with physical access could potentially exploit this vulnerability, leading to Information Disclosure. |
| [This CNA information record relates to multiple CVEs; the
text explains which aspects/vulnerabilities correspond to which CVE.]
To manage the system, sysctl and platform operations are used by the
control domain or a possible Xenstore domain. Some of these operations
may not be executed in parallel, so a system-wide lock each is used.
The way those locks are acquired is, however, not providing any fairness.
Furthermore, with XSM/Flask in use, the lock acquire will, for some
operations, occur ahead of any permission checking.
The sysctl issue is CVE-2026-62426.
The platform-op issue is CVE-2026-62427. |
| A flaw was found in org.keycloak.broker.saml. When a disabled Security Assertion Markup Language (SAML) client is configured as an Identity Provider (IdP)-initiated broker landing target, it can still complete the login process and establish a Single Sign-On (SSO) session. This allows a remote attacker to gain unauthorized access to other enabled clients without re-authentication, effectively bypassing security restrictions. |
| Mattermost versions 11.7.x <= 11.7.2, 11.6.x <= 11.6.4, 10.11.x <= 10.11.19 fail to invalidate OAuth refresh tokens upon user account deactivation, which allows a deactivated user or an attacker in possession of a valid refresh token to obtain new functional access tokens via the OAuth refresh token grant endpoint.. Mattermost Advisory ID: MMSA-2026-00680 |
| Mattermost versions 11.7.x <= 11.7.2, 11.6.x <= 11.6.4 fail to verify whether a guest account is deactivated before creating a session in the magic-link token login path, which allows a deactivated guest user to obtain a fully functional session via a magic-link token issued prior to deactivation.. Mattermost Advisory ID: MMSA-2026-00681 |
