Export limit exceeded: 367741 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (367741 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-63886 | 1 Linux | 1 Linux Kernel | 2026-07-20 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: scsi: target: iscsi: Validate CHAP_R length before base64 decode chap_server_compute_hash() allocates client_digest as kzalloc(chap->digest_size) and then, for BASE64-encoded responses, passes chap_r directly to chap_base64_decode() without checking whether the input length could produce more than digest_size bytes of output. chap_base64_decode() writes to the destination unconditionally as long as there is input to consume. With MAX_RESPONSE_LENGTH set to 128 and the "0b" prefix stripped by extract_param(), up to 127 base64 characters can reach the decoder. 127 characters decode to 95 bytes. For SHA-256 (digest_size=32) this overflows client_digest by 63 bytes; for MD5 (digest_size=16) the overflow is 79 bytes. The length check at line 344 fires after the write has already happened. The HEX branch in the same switch statement already validates the length up front. Apply the same approach to the BASE64 branch: strip trailing base64 padding characters, then reject any input whose data length exceeds DIV_ROUND_UP(digest_size * 4, 3) before calling the decoder. Stripping trailing '=' before the comparison handles both padded and unpadded encodings. chap_base64_decode() already returns early on '=', so the full original string is still passed to the decoder unchanged. The mutual CHAP path decodes CHAP_C into initiatorchg_binhex, which is kzalloc(CHAP_CHALLENGE_STR_LEN). extract_param() caps initiatorchg at CHAP_CHALLENGE_STR_LEN characters, so at most CHAP_CHALLENGE_STR_LEN-1 base64 characters reach the decoder. The maximum decoded size, DIV_ROUND_UP((CHAP_CHALLENGE_STR_LEN-1) * 3, 4), is less than CHAP_CHALLENGE_STR_LEN, so no overflow is possible there. A comment is added at the call site to document this. | ||||
| CVE-2026-63885 | 1 Linux | 1 Linux Kernel | 2026-07-20 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/gem: fix race between change_handle and handle_delete drm_gem_change_handle_ioctl leaves the old handle live in the IDR during the window between spin_unlock(table_lock) and the final spin_lock(table_lock). A concurrent drm_gem_handle_delete on the old handle succeeds in this window, decrements handle_count to 0, and frees the GEM object while the new handle's IDR entry still references it. NULL the old handle's IDR entry before dropping table_lock so that any concurrent GEM_CLOSE on the old handle sees NULL and returns -EINVAL. Restore the old entry on the prime-bookkeeping error path. | ||||
| CVE-2026-63884 | 1 Linux | 1 Linux Kernel | 2026-07-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/i915: Fix potential UAF in TTM object purge TLDR: The bo->ttm object might be changed by calling ttm_bo_validate(), move casting it to an i915_tt object later to actually get the right pointer. A user reported hitting the following bug under heavy use on DG2: [26620.095550] Oops: general protection fault, probably for non-canonical address 0xa56b6b6b6b6b6b8b: 0000 1 SMP NOPTI [26620.095556] CPU: 2 UID: 0 PID: 631 Comm: Xorg Not tainted 6.18.8 #1 PREEMPT(lazy) [26620.095558] Hardware name: ASRock B850M Steel Legend WiFi/B850M Steel Legend WiFi, BIOS 3.50 09/18/2025 [26620.095559] RIP: 0010:i915_ttm_purge+0x84/0x100 [i915] [26620.095604] Code: 00 00 00 48 8d 54 24 10 48 89 e6 48 89 fb e8 83 aa ae ff 85 c0 75 6f 48 83 bb a8 01 00 00 00 74 2c 48 8b 45 78 48 85 c0 74 23 <48> 8b 78 20 48 c7 c2 ff ff ff ff 31 f6 e8 7a 73 e3 e0 48 8b 7d 78 [26620.095605] RSP: 0018:ffffc90005fd7430 EFLAGS: 00010282 [26620.095607] RAX: a56b6b6b6b6b6b6b RBX: ffff8881f46c3dc0 RCX: 0000000000000000 [26620.095608] RDX: 0000000000000000 RSI: 0000000000000246 RDI: 00000000ffffffff [26620.095609] RBP: ffff888289610f00 R08: 0000000000000001 R09: ffff88823b022000 [26620.095609] R10: ffff888103029b28 R11: ffff8881fc7f3800 R12: ffff88810b6150d0 [26620.095609] R13: ffff888289610f00 R14: 0000000000000000 R15: ffff8881f46c3dc0 [26620.095610] FS: 00007f1004d86900(0000) GS:ffff88901c858000(0000) knlGS:0000000000000000 [26620.095611] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [26620.095611] CR2: 00007f0fdf489000 CR3: 000000035b0c1000 CR4: 0000000000750ef0 [26620.095612] PKRU: 55555554 [26620.095612] Call Trace: [26620.095615] <TASK> [26620.095615] i915_ttm_move+0x2b9/0x420 [i915] [26620.095642] ? ttm_tt_init+0x65/0x80 [ttm] [26620.095644] ? i915_ttm_tt_create+0xc6/0x150 [i915] [26620.095667] ttm_bo_handle_move_mem+0xb6/0x160 [ttm] [26620.095669] ttm_bo_evict+0x100/0x150 [ttm] [26620.095671] ? preempt_count_add+0x64/0xa0 [26620.095673] ? _raw_spin_lock+0xe/0x30 [26620.095675] ? _raw_spin_unlock+0xd/0x30 [26620.095675] ? i915_gem_object_evictable+0xb7/0xd0 [i915] [26620.095704] ttm_bo_evict_cb+0x6e/0xd0 [ttm] [26620.095705] ttm_lru_walk_for_evict+0xa6/0x200 [ttm] [26620.095708] ttm_bo_alloc_resource+0x185/0x4f0 [ttm] [26620.095709] ? init_object+0x62/0xd0 [26620.095712] ttm_bo_validate+0x7a/0x180 [ttm] [26620.095713] ? _raw_spin_unlock_irqrestore+0x16/0x30 [26620.095714] __i915_ttm_get_pages+0xb0/0x170 [i915] [26620.095737] i915_ttm_get_pages+0x9f/0x150 [i915] [26620.095759] ? i915_gem_do_execbuffer+0xedc/0x2b40 [i915] [26620.095786] ? alloc_debug_processing+0xd0/0x100 [26620.095787] ? _raw_spin_unlock_irqrestore+0x16/0x30 [26620.095788] ? i915_vma_instance+0xa0/0x4e0 [i915] [26620.095822] __i915_gem_object_get_pages+0x2f/0x40 [i915] [26620.095848] i915_vma_pin_ww+0x706/0x980 [i915] [26620.095875] ? i915_gem_do_execbuffer+0xedc/0x2b40 [i915] [26620.095904] eb_validate_vmas+0x170/0xa00 [i915] [26620.095930] i915_gem_do_execbuffer+0x1201/0x2b40 [i915] [26620.095953] ? alloc_debug_processing+0xd0/0x100 [26620.095954] ? _raw_spin_unlock_irqrestore+0x16/0x30 [26620.095955] ? i915_gem_execbuffer2_ioctl+0xc9/0x240 [i915] [26620.095977] ? __wake_up_sync_key+0x32/0x50 [26620.095979] ? i915_gem_execbuffer2_ioctl+0xc9/0x240 [i915] [26620.096001] ? __slab_alloc.isra.0+0x67/0xc0 [26620.096003] i915_gem_execbuffer2_ioctl+0x11a/0x240 [i915] Results from decode_stacktrace.sh pointed to dereference of a file pointer field of a i915 TTM page vector container associated with an object being purged on eviction. That path is taken when the object is marked as no longer needed. Code analysis revealed a possibility of the i915 TTM page vector container being replaced with a new instance inside a function that purges content of the object, should it be still busy. That function is called, indirectly via a more general function that changes the object's placement and caching policy, ---truncated--- | ||||
| CVE-2026-63883 | 1 Linux | 1 Linux Kernel | 2026-07-20 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: serial: qcom_geni: fix kfifo underflow when flush precedes DMA completion IRQ When uart_flush_buffer() runs before the DMA completion IRQ is delivered, the following race can occur (all steps serialized by uart_port_lock): 1. DMA starts: tx_remaining = N, kfifo contains N bytes 2. DMA completes in hardware; IRQ is pending but not yet delivered 3. uart_flush_buffer() acquires the port lock and calls kfifo_reset(), making kfifo_len() = 0 while tx_remaining remains N 4. uart_flush_buffer() releases the port lock 5. DMA IRQ fires; handle_tx_dma() acquires the port lock and calls uart_xmit_advance(uport, tx_remaining) on an empty kfifo uart_xmit_advance() increments kfifo->out by tx_remaining. Since kfifo_reset() already set both in and out to 0, out wraps past in, causing kfifo_len() to return UART_XMIT_SIZE - tx_remaining. The next start_tx_dma() call then submits a DMA transfer of stale buffer data. Fix this by snapshotting kfifo_len() at the start of handle_tx_dma() and skipping uart_xmit_advance() when fifo_len < tx_remaining, which indicates the kfifo was reset by a preceding flush. | ||||
| CVE-2026-63881 | 1 Linux | 1 Linux Kernel | 2026-07-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: fix a vulnerability of integer overflow in kfd debugger get_queue_ids() computes array_size = num_queues * sizeof(uint32_t), which could overflow on 32-bit size_t build. using array_size() instead, it saturates to SIZE_MAX on overflow. (cherry picked from commit 2d57a0475f085c08b49312dfd8edcb461845f285) | ||||
| CVE-2026-63879 | 1 Linux | 1 Linux Kernel | 2026-07-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix amdgpu_hmm_range_get_pages The notifier sequence must only be read once or otherwise we could work with invalid pages. While at it also fix the coding style, e.g. drop the pre-initialized return value and use the common define for 2G range. (cherry picked from commit c08972f555945cda57b0adb72272a37910153390) | ||||
| CVE-2026-63875 | 1 Linux | 1 Linux Kernel | 2026-07-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: arm64: tlb: Flush walk cache when unsharing PMD tables When huge_pmd_unshare() is called to unshare a PMD table, the tlb_unshare_pmd_ptdesc() function sets tlb->unshared_tables=true but the aarch64 tlb_flush() only checked tlb->freed_tables to determine whether to use TLBF_NONE (vae1is, invalidates walk cache) or TLBF_NOWALKCACHE (vale1is, leaf-only). This caused the stale PMD page table entry to remain in the walk cache after unshare, potentially leading to incorrect page table walks. Fix by including unshared_tables in the check, so that when unsharing tables, TLBF_NONE is used and the walk cache is properly invalidated. Here is the detailed distinction between vae1is and vale1is: | Instruction Combination | Actual Invalidation Scope | | ------------------------ | --------------------------------------------------| | `VAE1IS` + TTL=`0` | All entries at all levels (full invalidation) | | `VAE1IS` + TTL=`2` (L2) | Non-leaf at Level 0/1 + leaf at Level 2 | | `VALE1IS` + TTL=`0` | Leaf entries at all levels (non-leaf not cleared) | | `VALE1IS` + TTL=`2` (L2) | Leaf entry at Level 2 only | | ||||
| CVE-2026-63874 | 1 Linux | 1 Linux Kernel | 2026-07-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: mctp: usb: fix race between urb completion and rx_retry cancellation It's possible that sequencing between setting ->stopped and cancelling the rx_retry work (in ndo_stop) could leave us with an urb queued: T1: ndo_stop T2: rx_retry_work ------------ ---------------- LD: ->stopped => false ST: ->stopped <= true usb_kill_urb() mctp_usb_rx_queue() usb_submit_urb() cancel_delayed_work_sync() That urb completion can then re-schedule rx_retry_work. Strenghen the sequencing between the stop (preventing another requeue) and the cancel by updating both atomically under a new rx lock. After setting ->rx_stopped, and cancelling pending work, we know that the requeue cannot occur, so all that's left is killing any pending urb. | ||||
| CVE-2026-63872 | 1 Linux | 1 Linux Kernel | 2026-07-20 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: esp: fix page frag reference leak on skb_to_sgvec failure In esp_output_tail(), when esp->inplace is false, the old skb page frags are replaced with a new page from the xfrm page_frag cache. The source scatterlist (sg) is built from the old frags before the replacement, and esp_ssg_unref() is responsible for releasing the old page references after the crypto operation completes. However, if the second skb_to_sgvec() call (which builds the destination scatterlist from the new page) fails, the code jumps to error_free which only calls kfree(tmp). The old page frag references captured in the source scatterlist are never released: 1. sg[] is built from old frags via skb_to_sgvec() (no extra get_page) 2. nr_frags is set to 1 and frag[0] is replaced with the new page 3. Second skb_to_sgvec() fails -> goto error_free 4. kfree(tmp) frees the sg[] memory but old frags are not unref'd 5. kfree_skb() only releases frag[0] (the new page), not the old ones Fix this by adding a bool parameter to esp_ssg_unref() that, when true, unconditionally unrefs the source scatterlist frags without checking req->src and req->dst, since those fields are not yet initialized by aead_request_set_crypt() at the point of the error. Existing callers pass false to preserve the original behavior. The same issue exists in both esp4 and esp6 as the code is identical. | ||||
| CVE-2026-63870 | 1 Linux | 1 Linux Kernel | 2026-07-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ieee802154: 6lowpan: only accept IPv6 packets in lowpan_xmit() The aoe driver (or similar) generates a non-IPv6 packet (e.g., ETH_P_AOE) and queues it for transmission via dev_queue_xmit() on a 6LoWPAN interface (configured by the user or test case). Since the packet is not IPv6, the 6LoWPAN header_ops->create function (lowpan_header_create or header_create) returns early without initializing the lowpan_addr_info structure in the skb headroom. In the transmit function (lowpan_xmit), the driver calls lowpan_header (or setup_header) which unconditionally copies and uses the lowpan_addr_info from the headroom, which contains uninitialized data. Fix this by dropping non IPv6 packets. A similar fix is needed in net/bluetooth/6lowpan.c bt_xmit(). | ||||
| CVE-2026-63869 | 1 Linux | 1 Linux Kernel | 2026-07-20 | 7.6 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: limit injected antenna index in ieee80211_parse_tx_radiotap When parsing the radiotap header of an injected frame, ieee80211_parse_tx_radiotap() uses the IEEE80211_RADIOTAP_ANTENNA value directly as a shift count: info->control.antennas |= BIT(*iterator.this_arg); *iterator.this_arg is an 8-bit value taken straight from the frame supplied by userspace, so BIT() can be asked to shift by up to 255. That is undefined behaviour on the unsigned long and is reported by UBSAN: UBSAN: shift-out-of-bounds in net/mac80211/tx.c:2174:30 shift exponent 235 is too large for 64-bit type 'unsigned long' Call Trace: ieee80211_parse_tx_radiotap+0xadb/0x1950 net/mac80211/tx.c:2174 ieee80211_monitor_start_xmit+0xb1f/0x1250 net/mac80211/tx.c:2451 ... packet_sendmsg+0x3eb6/0x50f0 net/packet/af_packet.c:3109 info->control.antennas is a 2-bit bitmap (u8 antennas:2), so only antenna indices 0 and 1 can ever be represented. Ignore any larger value instead of shifting out of bounds. | ||||
| CVE-2026-63867 | 1 Linux | 1 Linux Kernel | 2026-07-20 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: close TOCTOU race while computing rcv_wnd The MPTCP output path access locklessly the MPTCP-level ack_seq in multiple times, using possibly different values for the data_ack in the DSS option and to compute the announced rcv wnd for the same packet. Refactor the cote to avoid inconsistencies which may confuse the peer. Also ensure that the MPTCP level rcv wnd is updated only when the egress packet actually contains a DSS ack. | ||||
| CVE-2026-63866 | 1 Linux | 1 Linux Kernel | 2026-07-20 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: Clear wcid pointer in mt7996_mac_sta_deinit_link() Clear WCID pointer removing the sta link in mt7996_mac_sta_deinit_link routine. | ||||
| CVE-2026-63865 | 1 Linux | 1 Linux Kernel | 2026-07-20 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Drop task_to_inode and inet_conn_established from lsm sleepable hooks bpf_lsm_task_to_inode() is called under rcu_read_lock() and bpf_lsm_inet_conn_established() is called from softirq context, so neither hook can be used by sleepable LSM programs. | ||||
| CVE-2026-63864 | 1 Linux | 1 Linux Kernel | 2026-07-20 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Propagate error from visit_tailcall_insn Commit e40f5a6bf88a ("bpf: correct stack liveness for tail calls") added visit_tailcall_insn() but did not check its return value. | ||||
| CVE-2026-63863 | 1 Linux | 1 Linux Kernel | 2026-07-20 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/gpusvm: Fix unbalanced unlock in drm_gpusvm_scan_mm() There is a unbalanced lock/unlock to gpusvm notifier lock: [ 931.045868] ===================================== [ 931.046509] WARNING: bad unlock balance detected! [ 931.047149] 6.19.0-rc6+xe-**************** #9 Tainted: G U [ 931.048150] ------------------------------------- [ 931.048790] kworker/u5:0/51 is trying to release lock (&gpusvm->notifier_lock) at: [ 931.049801] [<ffffffffa090c0d8>] drm_gpusvm_scan_mm+0x188/0x460 [drm_gpusvm_helper] [ 931.050802] but there are no more locks to release! [ 931.051463] The drm_gpusvm_notifier_unlock() sits under err_free label and the first jump to err_free is just before calling the drm_gpusvm_notifier_lock() causing unbalanced unlock. | ||||
| CVE-2026-63860 | 1 Linux | 1 Linux Kernel | 2026-07-20 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Prefer NLA_NUL_STRING These attributes are evaluated as c-string (passed to strcmp), but NLA_STRING doesn't check for the presence of a \0 terminator. Either this needs to switch to nla_strcmp() and needs to adjust printf fmt specifier to not use plain %s, or this needs to use NLA_NUL_STRING. As the code has been this way for long time, it seems to me that userspace does include the terminating nul, even tough its not enforced so far, and thus NLA_NUL_STRING use is the simpler solution. | ||||
| CVE-2026-63858 | 1 Linux | 1 Linux Kernel | 2026-07-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: add hook transactions for device deletions Restore the flag that indicates that the hook is going away, ie. NFT_HOOK_REMOVE, but add a new transaction object to track deletion of hooks without altering the basechain/flowtable hook_list during the preparation phase. The existing approach that moves the hook from the basechain/flowtable hook_list to transaction hook_list breaks netlink dump path readers of this RCU-protected list. It should be possible use an array for nft_trans_hook to store the deleted hooks to compact the representation but I am not expecting many hook object, specially now that wildcard support for devices is in place. Note that the nft_trans_chain_hooks() list contains a list of struct nft_trans_hook objects for DELCHAIN and DELFLOWTABLE commands, while this list stores struct nft_hook objects for NEWCHAIN and NEWFLOWTABLE. Note that new commands can be updated to use nft_trans_hook for consistency. This patch also adapts the event notification path to deal with the list of hook transactions. | ||||
| CVE-2026-63857 | 1 Linux | 1 Linux Kernel | 2026-07-20 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net: airoha: Do not read uninitialized fragment address in airoha_dev_xmit() The transmit loop in airoha_dev_xmit() reads fragment address and length during its final iteration, when the loop index equals skb_shinfo(skb)->nr_frags, at which point the fragment data is uninitialized. While these values are never consumed, the read itself is unsafe and may trigger a page fault. Fix this by avoiding the fragment read on the last iteration. Additionally, move the skb pointer from the first to the last used packet descriptor, so that airoha_qdma_tx_napi_poll() defers freeing the skb until the final descriptor is processed. | ||||
| CVE-2026-63856 | 1 Linux | 1 Linux Kernel | 2026-07-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/vcn: set no_user_fence for VCN v2.0 enc/dec rings VCN encoder and decoder rings do not support 64-bit user fence writes, reject CS submissions with user fences. (cherry picked from commit e2b5499fca55f1a32960a311bbb62e35891eaf73) | ||||