Export limit exceeded: 23050 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (23050 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-64101 | 1 Linux | 1 Linux Kernel | 2026-08-11 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fwctl: pds: Validate RPC input size before parsing The fwctl core allocates the device-specific RPC input buffer with fwctl_rpc.in_len and passes that buffer to the driver callback. pdsfc_fw_rpc() casts the buffer to struct fwctl_rpc_pds and then calls pdsfc_validate_rpc(), which reads fields from that structure before checking that the input buffer is large enough to contain it. A short in_len can make pds_fwctl read beyond the allocation. Reject pds RPC buffers that are smaller than struct fwctl_rpc_pds before parsing any pds-specific fields. | ||||
| CVE-2026-64092 | 1 Linux | 1 Linux Kernel | 2026-08-11 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: tp_meter: fix tp_vars reference leak in receiver shutdown The receiver shutdown timer handler, batadv_tp_receiver_shutdown(), is responsible for releasing the tp_vars reference it holds. However, the existing logic for coordinating this release with batadv_tp_stop_all() was flawed. timer_shutdown_sync() guarantees the timer will not fire again after it returns, but it returns non-zero only when the timer was pending at the time of the call. If the timer had already expired (and batadv_tp_stop_all() would unsucessfully try to rearm itself), batadv_tp_stop_all() skips its batadv_tp_vars_put(), and batadv_tp_receiver_shutdown() fails to put its own reference as well. Fix this by introducing a new atomic variable receiving that is set to 1 when the receiver is initialized and cleared atomically with atomic_xchg() by whichever side claims it first. Only the side that observes the transition from 1 to 0 is responsible for releasing the tp_vars timer reference, eliminating the uncertainty. | ||||
| CVE-2026-64093 | 1 Linux | 1 Linux Kernel | 2026-08-11 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: tp_meter: directly shut down timer on cleanup batadv_tp_sender_cleanup() was calling timer_delete_sync() followed by timer_delete() to guard against the timer handler re-arming itself between the two calls. This double-deletion hack relied on the sending status being set to 0 to suppress re-arming. Replace both calls with a single timer_shutdown_sync(). This function both waits for any running timer callback to complete (like timer_delete_sync()) and permanently disarms the timer so it cannot be re-armed afterwards, making re-arming prevention unconditional and self-documenting. The re-arming property is also required because otherwise: 1. context 0 (batadv_tp_recv_ack()) checks in batadv_tp_reset_sender_timer() if sending is still 1 -> it is 2. context 1 changes in batadv_tp_sender_shutdown() sending to 0 and in this process forces the kthread to stop timer in batadv_tp_sender_cleanup() 3. context 0 continues in batadv_tp_reset_sender_timer() and rearms the timer -> but the reference for it is already gone | ||||
| CVE-2026-64091 | 1 Linux | 1 Linux Kernel | 2026-08-11 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: tt: fix TOCTOU race for reported vlans The local TT based TVLV is generated by first checking the number of VLANs which have at least one TT entry. A new buffer with the correct size for the VLANs is then allocated. Only then, the list of VLANs s used to fill the VLAN entries in the buffer. During this time, the meshif_vlan_list_lock is held. But the actual number of TT entries of each VLAN can still increase during this time - just not the number of VLANs in the list. But the prefilter used in the buffer size calculation might still cause an increase of the number of VLANs which need to be stored. Simply because a VLAN might now suddenly have at least one entry when it had none in the pre-alloc check - and then needs to occupy space which was not allocated. It is better to overestimate the buffer size at the beginning and then fill the buffer only with the VLANs which are not empty. | ||||
| CVE-2026-64090 | 1 Linux | 1 Linux Kernel | 2026-08-11 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: tt: avoid empty VLAN responses The commit 16116dac2339 ("batman-adv: prevent TT request storms by not sending inconsistent TT TLVLs") added checks to the local (direct) TT response code. But the response can also be done indirectly by another node using the global TT state. To avoid such inconsistency states reported in the original fix, also avoid sending empty VLANs for replies from the global TT state. | ||||
| CVE-2026-64089 | 1 Linux | 1 Linux Kernel | 2026-08-11 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: tt: fix negative last_changeset_len batadv_piv_tt::last_changeset_len len was declared as s16, but the field is never intended to hold a negative value. When a value greater than 32767 is assigned, it wraps to a negative signed integer. In batadv_send_my_tt_response(), last_changeset_len is temporarily widened to s32. The incorrectly negative s16 value propagates into the s32, causing batadv_tt_prepare_tvlv_local_data() to allocate a full sized buffer but populates only a small portion of it with the collected changeset. All remaining bits are kept uninitialized. Using an u16 avoids this type confusion and ensures that no (negative) sign extension is performed in batadv_send_my_tt_response(). | ||||
| CVE-2026-64088 | 1 Linux | 1 Linux Kernel | 2026-08-11 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: tt: fix negative tt_buff_len batadv_orig_node::tt_buff_len was declared as s16, but the field is never intended to hold a negative value. When a value greater than 32767 is assigned, it wraps to a negative signed integer. In batadv_send_other_tt_response(), tt_buff_len is temporarily widened to s32. The incorrectly negative s16 value propagates into the s32, causing batadv_tt_prepare_tvlv_global_data() to allocate a full sized buffer but populates only a small portion of it with the collected changeset. All remaining bits are kept uninitialized. Using an u16 avoids this type confusion and ensures that no (negative) sign extension is performed in batadv_send_other_tt_response(). | ||||
| CVE-2026-68480 | 1 Linux | 1 Linux Kernel | 2026-08-11 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: x86/bugs: Make Safe-RET robust against interrupt injection An attacker injecting interrupts while the Safe-RET mitigation executes on machines affected by SRSO can neutralize the safe return sequence, potentially leading to data leakage through speculative execution. Fixup register state as if the Safe-RET sequence executed successfully by "emulating" it, in a manner of speaking, and avoid executing a RET instruction after returning from the interrupt. | ||||
| CVE-2026-68356 | 1 Linux | 1 Linux Kernel | 2026-08-11 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: watchdog: airoha: Prevent division by zero when clock frequency is zero clk_get_rate() can return 0 when the clock provider is not properly configured or the clock is unmanaged. The driver uses wdt_freq as a divisor directly in airoha_wdt_probe() to compute max_timeout and in airoha_wdt_get_timeleft() to compute the remaining time, which results in a division by zero. Add a check for wdt_freq == 0 in probe and return -EINVAL with dev_err_probe() to prevent the division by zero and provide a diagnostic message. | ||||
| CVE-2026-68171 | 1 Linux | 1 Linux Kernel | 2026-08-11 | 8.2 High |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | ||||
| CVE-2026-31404 | 1 Linux | 1 Linux Kernel | 2026-08-11 | 5.5 Medium |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | ||||
| CVE-2026-46194 | 1 Linux | 1 Linux Kernel | 2026-08-11 | N/A |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | ||||
| CVE-2026-63872 | 1 Linux | 1 Linux Kernel | 2026-08-11 | 5.5 Medium |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | ||||
| CVE-2021-47504 | 1 Linux | 1 Linux Kernel | 2026-08-11 | 5.5 Medium |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | ||||
| CVE-2026-68408 | 1 Linux | 1 Linux Kernel | 2026-08-11 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: convert pmsr_free_wk to wiphy_work to fix deadlock When a netlink socket that owns a PMSR session is closed, cfg80211_release_pmsr() clears the request's nl_portid and queues pmsr_free_wk to call cfg80211_pmsr_process_abort() asynchronously. If the interface tears down concurrently, cfg80211_pmsr_wdev_down() is called under wiphy_lock and calls cancel_work_sync(&pmsr_free_wk) to wait for any running work. The work function acquires wiphy_lock via guard(wiphy) before calling process_abort. This is a deadlock: wdev_down holds wiphy_lock and blocks inside cancel_work_sync(); pmsr_free_wk blocks trying to acquire that same wiphy_lock. Neither thread can proceed. The same deadlock is reachable from cfg80211_leave_locked(), which calls cfg80211_pmsr_wdev_down() for all interface types under wiphy_lock. Fix this by converting pmsr_free_wk from a plain work_struct to a wiphy_work. The wiphy_work dispatcher holds wiphy_lock when running work items, so the explicit guard(wiphy) in the work function is no longer needed. wiphy_work_cancel() can be called safely while holding wiphy_lock - since wiphy_lock prevents the work from running concurrently, wiphy_work_cancel() never blocks, eliminating the deadlock. Remove the cancel_work_sync() for pmsr_free_wk from the NETDEV_GOING_DOWN handler. cfg80211_leave(), called unconditionally just before it, already cancels any pending work under wiphy_lock via wiphy_work_cancel() inside cfg80211_pmsr_wdev_down(). | ||||
| CVE-2026-68424 | 1 Linux | 1 Linux Kernel | 2026-08-11 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mtd: virt_concat: fix use-after-free in mtd_virt_concat_destroy_joins() mtd_concat_destroy() frees item->concat so calling mtd_virt_concat_put_mtd_devices(item->concat) leads to a use after free. Fix this by moving mtd_virt_concat_put_mtd_devices() before mtd_concat_destroy() | ||||
| CVE-2026-68418 | 1 Linux | 1 Linux Kernel | 2026-08-11 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/irdma: Prevent user-triggered null deref on QP create Previously, the user QP creation path would only attempt to populate iwqp->iwpbl if the user-provided req.user_wqe_bufs field was non-zero. The problem is that iwqp->iwpbl is unconditionally dereferenced later on in irdma_setup_virt_qp. While there was a check for iwqp->iwpbl != NULL, this check would only occur if req.user_wqe_bufs was non-zero. The end result is that a user could send a zero user_wqe_bufs value and trigger a null ptr deref. Fix this by unconditionally calling irdma_get_pbl and bailing if it fails, similar to the CQ and SRQ paths. | ||||
| CVE-2026-68396 | 1 Linux | 1 Linux Kernel | 2026-08-11 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: core: wake eh reliably when using scsi_schedule_eh Drivers which use the scsi_schedule_eh function to run the error handler currently risk the error handler thread never waking once all commands are timed out or inactive. There is no enforced memory order between setting the host into error recovery state and counting busy commands. This can result in a race with scsi_dec_host_busy where neither CPU sees both conditions of all commands inactive and the host error state to request waking the error handler. To fix this, run the scsi_schedule_eh's scsi_eh_wakeup from a new work item which will use rcu to ensure scsi_schedule_eh's call to scsi_host_busy will occur after the error state is globally visible and will be seen by any current scsi_dec_host_busy callers. | ||||
| CVE-2026-68307 | 1 Linux | 1 Linux Kernel | 2026-08-11 | 4.8 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7925: fix crash in reset link replay During reset recovery, mt7925_vif_connect_iter() replays firmware state for links tracked in mvif->valid_links. After MLO link changes or MCU timeout recovery, the driver bitmap can temporarily contain a link whose mac80211 bss_conf has already gone away. This can pass a NULL bss_conf to mt76_connac_mcu_uni_add_dev(), matching the crash where x1, the second argument, is NULL: pc : mt76_connac_mcu_uni_add_dev+0x8c/0x1f8 [mt76_connac_lib] lr : mt7925_vif_connect_iter+0x9c/0x168 [mt7925_common] x2 : ffffff80a77f6018 x1 : 0000000000000000 x0 : ffffff8099402080 Call trace: mt76_connac_mcu_uni_add_dev+0x8c/0x1f8 [mt76_connac_lib] mt7925_vif_connect_iter+0x9c/0x168 [mt7925_common] mt7925_mac_reset_work+0x264/0x2f8 [mt7925_common] Skip missing bss_conf entries before replaying the link. Non-MLO AP/STA reset replay is unchanged because the helper still returns &vif->bss_conf for the legacy link. | ||||
| CVE-2026-68375 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Handle partially initialized auxiliary devices bnxt_aux_devices_init() calls auxiliary_device_init() before all fields used by bnxt_aux_dev_release() are initialized. After auxiliary_device_init() succeeds, later errors must unwind with auxiliary_device_uninit(), which invokes the release callback. The release callback assumes that aux_priv->id, aux_priv->edev, edev->net and edev->ulp_tbl are all populated. If allocation fails after auxiliary_device_init(), the release path can otherwise dereference or clear partially initialized state. Allocate and attach the bnxt_en_dev and ULP table before calling auxiliary_device_init(), so the release callback only sees a fully initialized auxiliary private object. If auxiliary_device_init() itself fails, free those allocations directly because device_initialize() has not run and the release callback will not be invoked. This issue was found by a static analysis checker and confirmed by manual source review. | ||||