Export limit exceeded: 386818 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (386818 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-64477 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: x86,fs/resctrl: Prevent out-of-bounds access while offlining CPU when SNC enabled The architecture updates the cpu_mask in a domain's header to track which online CPUs are associated with the domain. When this mask becomes empty the architecture initiates offline of the domain that includes calling on resctrl fs to offline the domain. If it is a monitoring domain in which LLC occupancy is tracked resctrl fs forces the limbo handler to clear all busy RMID state associated with the domain. The limbo handler always reads the current event value associated with a busy RMID irrespective of it being checked as part of regular "is it still busy" check or whether it will be forced released anyway. When reading an RMID on a system with SNC enabled the "logical RMID" is converted to the "physical RMID" and this conversion requires the NUMA node ID of the resctrl monitoring domain that is in turn determined by querying the NUMA node ID of any CPU belonging to the monitoring domain. When the monitoring domain is going offline its cpu_mask is empty causing the NUMA node ID query via cpu_to_node() to be done with "nr_cpu_ids" as argument resulting in an out-of-bounds access. Refactor the limbo handler to skip reading the RMID when the RMID will just be forced to no longer be dirty in the domain anyway. Add a safety check to the architecture's RMID reader to protect against this scenario. | ||||
| CVE-2026-64482 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: gus: check snd_ctl_new1() return value snd_ctl_new1() can return NULL when memory allocation fails. snd_gf1_pcm_volume_control() does not check the return value before dereferencing kctl->id.index, which can lead to a NULL pointer dereference. Add a NULL check after snd_ctl_new1() and return -ENOMEM if it fails. | ||||
| CVE-2026-64499 | 1 Linux | 1 Linux Kernel | 2026-07-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: adc: ti-ads1119: fix PM reference leak in buffer preenable ads1119_triggered_buffer_preenable() resumes the device with pm_runtime_resume_and_get() before starting a conversion. If i2c_smbus_write_byte() fails, the function returns the error directly and leaves the runtime PM usage counter elevated. The matching postdisable callback is not called when preenable fails, so the reference is leaked and the device may remain runtime-active indefinitely. Store the I2C transfer result in ret and drop the runtime PM reference on failure before returning the error. | ||||
| CVE-2026-64503 | 1 Linux | 1 Linux Kernel | 2026-07-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: accel: kxsd9: fix runtime PM imbalance on write_raw() error kxsd9_write_raw() takes a runtime PM reference with pm_runtime_get_sync() but returns -EINVAL directly when a scale with a non-zero integer part is requested, skipping the matching pm_runtime_put_autosuspend(). This leaks a runtime PM usage-counter reference on every such write, after which the device can no longer autosuspend. Set the error code and fall through to the existing put instead of returning early. | ||||
| CVE-2026-64530 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_api: Handle TC_ACT_CONSUMED in tcf_qevent_handle tcf_classify() can return TC_ACT_CONSUMED while the skb is held by the defragmentation engine (e.g. act_ct on out-of-order fragments). When that happens the skb is no longer owned by the caller and must not be touched again. tcf_qevent_handle() did not handle TC_ACT_CONSUMED: it fell through the switch and returned the skb to the caller as if classification had passed. The only qdisc that wires up qevents today is RED, via three call sites (qe_mark on RED_PROB_MARK/HARD_MARK, qe_early_drop on congestion_drop) red_enqueue() was continuing to operate on an skb it no longer owns in this case -- enqueueing it, dropping it, or updating statistics. Resulting in a UAF. tc qdisc add dev eth0 root handle 1: red ... qevent early_drop block 10 tc filter add block 10 ... action ct (with ct defrag enabled and traffic that produces out-of-order fragments, e.g. a fragmented UDP stream) Handle TC_ACT_CONSUMED in tcf_qevent_handle() the same way the ingress and egress fast paths do: treat it as stolen and return NULL without touching the skb. Unlike the TC_ACT_STOLEN case, the skb must not be dropped/freed here, as it is no longer owned by us. | ||||
| CVE-2026-64529 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: crypto: qat - remove unused character device and IOCTLs The QAT driver exposes a character device (qat_adf_ctl) with IOCTLs for device configuration, start, stop, status query and enumeration. These IOCTLs are not part of any public uAPI header and have no known in-tree or out-of-tree users. Device lifecycle is already managed via sysfs. The ioctl interface also increases the attack surface and is the subject of a number of bug reports. Remove the character device, the IOCTL definitions, and the related data structures (adf_dev_status_info, adf_user_cfg_key_val, adf_user_cfg_section, adf_user_cfg_ctl_data). Drop the now-unused adf_cfg_user.h header and strip adf_ctl_drv.c down to the minimal module_init/module_exit hooks for workqueue, AER, and crypto/compression algorithm registration. Clean up leftover dead code that was only reachable from the removed IOCTL paths: adf_cfg_del_all(), adf_devmgr_verify_id(), adf_devmgr_get_num_dev(), adf_devmgr_get_dev_by_id(), adf_get_vf_real_id() and the unused ADF_CFG macros. Additionally, drop the entry associated to QAT IOCTLs in ioctl-number.rst. | ||||
| CVE-2026-64496 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: iio: event: Fix event FIFO reset race `iio_event_getfd()` creates the event file descriptor with `anon_inode_getfd()`, which allocates a new fd, creates the anonymous file and installs it in the process fd table before returning to the caller. The IIO code resets the event FIFO after `anon_inode_getfd()` has returned, but before `IIO_GET_EVENT_FD_IOCTL` has copied the fd number to userspace. But since fd tables are shared between threads, another thread can guess the newly allocated fd number and issue a `read()` on it as soon as the fd has been installed. This means the `kfifo_to_user()` in `iio_event_chrdev_read()` can run in parallel with the `kfifo_reset_out()` in `iio_event_getfd()`. The kfifo documentation says that `kfifo_reset_out()` is only safe when it is called from the reader thread and there is only one concurrent reader. Otherwise it is dangerous and must be handled in the same way as `kfifo_reset()`. If that happens, `kfifo_to_user()` can advance the FIFO `out` index based on state from before the reset, after the reset has already moved the `out` index to the current `in` index. That can leave the FIFO with an `out` index past the `in` index. A later `read()` can then see an underflowed FIFO length and copy more data than the event FIFO buffer contains. This can result in an out-of-bounds read and leak adjacent kernel memory to userspace. Move the FIFO reset before `anon_inode_getfd()`. At that point the event fd is marked busy, but the new fd has not been installed yet, so userspace cannot access it while the FIFO is reset. | ||||
| CVE-2026-64402 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: coresight: ultrasoc-smb: Fix OOB write in smb_sync_perf_buffer() When the SMB sink is used as a perf AUX sink, smb_update_buffer() calls smb_sync_perf_buffer() to copy hardware trace data into the perf AUX ring buffer pages. It derives pg_idx = head >> PAGE_SHIFT from @head, which is handle->head, and indexes dst_pages[pg_idx]. The pg_idx %= nr_pages normalization is only applied after the first loop iteration. This leaves the initial page index underived from the buffer size, which can result in an out-of-bounds write past dst_pages[] when head exceeds the AUX buffer size. Normalize head modulo the AUX buffer size before deriving the page index and offset, mirroring tmc_etr_sync_perf_buffer(). | ||||
| CVE-2026-64379 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: mask server-provided mode to 07777 in modefromsid When modefromsid is active, parse_dacl() applies the server-provided sub_auth[2] value from the NFS mode SID to cf_mode without masking to 07777. Apply the correct masking, same as in the read path. | ||||
| CVE-2026-64518 | 1 Linux | 1 Linux Kernel | 2026-07-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tcp: Fix out-of-bounds access for twsk in tcp_ao_established_key(). lockdep_sock_is_held() was added in tcp_ao_established_key() by the cited commit. It can be called from tcp_v[46]_timewait_ack() with twsk. Since it does not have sk->sk_lock, the lockdep annotation results in out-of-bound access. $ pahole -C tcp_timewait_sock vmlinux | grep size /* size: 288, cachelines: 5, members: 8 */ $ pahole -C sock vmlinux | grep sk_lock socket_lock_t sk_lock; /* 440 192 */ Let's not use lockdep_sock_is_held() for TCP_TIME_WAIT. | ||||
| CVE-2026-48561 | 1 Microsoft | 4 365 Copilot, 365 Copilot Android, 365 Copilot Ios and 1 more | 2026-07-26 | 9.6 Critical |
| Improper neutralization of special elements used in a command ('command injection') in Copilot Chat (Microsoft Edge) allows an unauthorized attacker to execute code over a network. | ||||
| CVE-2026-57213 | 2 Broadcom, Rabbitmq | 2 Rabbitmq Server, Rabbitmq-server | 2026-07-26 | 4.8 Medium |
| RabbitMQ is a messaging and streaming broker. Prior to 3.13.14, 4.0.19, 4.1.10, and 4.2.5, the rabbitmq_federation_management plugin renders the consumer_tag field on the Federation Status page without HTML escaping, allowing a user who can configure a federation upstream or policy to execute JavaScript in the browser of a user viewing that page. This issue is fixed in versions 3.13.14, 4.0.19, 4.1.10, and 4.2.5. | ||||
| CVE-2026-57212 | 2 Broadcom, Rabbitmq | 2 Rabbitmq Server, Rabbitmq-server | 2026-07-26 | 7.7 High |
| RabbitMQ is a messaging and streaming broker. Prior to 3.13.14, 4.0.19, 4.1.10, and 4.2.5, the rabbitmq_management HTTP API accepts oversized valid JSON bodies on with_decode and direct_request paths because read_complete_body checks the accumulated size before the final chunk but not the final combined size. This issue is fixed in versions 3.13.14, 4.0.19, 4.1.10, and 4.2.5. | ||||
| CVE-2026-57211 | 3 Broadcom, Microsoft, Rabbitmq | 3 Rabbitmq Server, Windows, Rabbitmq-server | 2026-07-26 | 6.5 Medium |
| RabbitMQ is a messaging and streaming broker. Prior to 4.1.11 and 4.2.6 on Windows, the RabbitMQ management plugin static file handler rabbit_mgmt_wm_static can pass URL-encoded backslashes to erl_prim_loader:read_file_info before path validation when multiple management extension plugins are enabled, causing outbound DNS and SMB requests to attacker-controlled UNC paths. This issue is fixed in versions 4.1.11 and 4.2.6. | ||||
| CVE-2026-57220 | 2 Broadcom, Rabbitmq | 2 Rabbitmq Server, Rabbitmq-server | 2026-07-26 | 7.5 High |
| RabbitMQ is a messaging and streaming broker. Prior to 4.2.6, the RabbitMQ stream listener does not enforce the configured stream frame-size limit while assembling frames during authentication and before Tune negotiation, allowing an unauthenticated remote client to declare oversized frame lengths and consume broker memory in rabbit_stream_core. This issue is fixed in version 4.2.6. | ||||
| CVE-2026-57215 | 2 Broadcom, Rabbitmq | 2 Rabbitmq Server, Rabbitmq-server | 2026-07-26 | 8.8 High |
| RabbitMQ is a messaging and streaming broker. Prior to 3.13.15, 4.0.20, 4.1.11, and 4.2.6, RabbitMQ allows foreign bindings to amq.rabbitmq.reply-to destinations because volatile direct-reply-to queues can be accepted at bind and route time but are missing from Khepri-backed deletion checks, leaving persistent route entries after unbind. This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, and 4.2.6. | ||||
| CVE-2026-57217 | 2 Broadcom, Rabbitmq | 2 Rabbitmq Server, Rabbitmq-server | 2026-07-26 | 6.5 Medium |
| RabbitMQ is a messaging and streaming broker. Prior to 3.13.15, 4.0.21, 4.1.11, and 4.2.6, RabbitMQ topic authorization can allow restricted topic writes and binds during metadata-store failures because topic-permission lookup errors from Khepri can collapse to undefined, which the internal backend treats as allow. This issue is fixed in versions 3.13.15, 4.0.21, 4.1.11, and 4.2.6. | ||||
| CVE-2026-15766 | 1 Google | 1 Chrome | 2026-07-26 | 6.5 Medium |
| Uninitialized Use in Skia in Google Chrome prior to 150.0.7871.125 allowed a remote attacker to obtain potentially sensitive information from process memory via a crafted HTML page. (Chromium security severity: High) | ||||
| CVE-2026-15769 | 2 Google, Linux | 2 Chrome, Linux Kernel | 2026-07-26 | 8.3 High |
| Insufficient validation of untrusted input in Linux Toolkit Theming in Google Chrome on Linux prior to 150.0.7871.125 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High) | ||||
| CVE-2026-15770 | 1 Google | 1 Chrome | 2026-07-26 | 6.5 Medium |
| Uninitialized Use in V8 in Google Chrome prior to 150.0.7871.125 allowed a remote attacker to obtain potentially sensitive information from process memory via a crafted HTML page. (Chromium security severity: High) | ||||