Export limit exceeded: 16122 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (16122 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-1866 | 2026-04-15 | 8.0 High | ||
| Improper Restriction of Operations within the Bounds of a Memory Buffer vulnerability in warmcat libwebsockets allows Pointer Manipulation, potentially leading to out-of-bounds memory access. This issue affects libwebsockets before 4.3.4 and is present in code built specifically for the Win32 platform. By default, the affected code is not executed unless one of the following conditions is met: LWS_WITHOUT_EXTENSIONS (default ON) is manually set to OFF in CMake. LWS_WITH_HTTP_STREAM_COMPRESSION (default OFF) is manually set to ON in CMake. Despite these conditions, when triggered in affected configurations, this vulnerability may allow attackers to manipulate pointers, potentially leading to memory corruption or unexpected behavior. | ||||
| CVE-2025-10217 | 1 Hitachienergy | 1 Asset Suite | 2026-04-15 | N/A |
| A vulnerability exists in Asset Suite for an authenticated user to manipulate the content of performance related log data or to inject crafted data in logfile for potentially carrying out further malicious attacks. Performance logging is typically enabled for troubleshooting purposes while resolving application performance related issues. | ||||
| CVE-2024-48970 | 1 Baxter | 1 Life2000 Ventilator Firmware | 2026-04-15 | 9.3 Critical |
| The ventilator's microcontroller lacks memory protection. An attacker could connect to the internal JTAG interface and read or write to flash memory using an off-the-shelf debugging tool, which could disrupt the function of the device and/or cause unauthorized information disclosure. | ||||
| CVE-2025-2851 | 2026-04-15 | 8 High | ||
| A vulnerability classified as critical has been found in GL.iNet GL-A1300 Slate Plus, GL-AR300M16 Shadow, GL-AR300M Shadow, GL-AR750 Creta, GL-AR750S-EXT Slate, GL-AX1800 Flint, GL-AXT1800 Slate AX, GL-B1300 Convexa-B, GL-B3000 Marble, GL-BE3600 Slate 7, GL-E750, GL-E750V2 Mudi, GL-MT300N-V2 Mango, GL-MT1300 Beryl, GL-MT2500 Brume 2, GL-MT3000 Beryl AX, GL-MT6000 Flint 2, GL-SFT1200 Opal, GL-X300B Collie, GL-X750 Spitz, GL-X3000 Spitz AX, GL-XE300 Puli and GL-XE3000 Puli AX 4.x. Affected is an unknown function of the file plugins.so of the component RPC Handler. The manipulation leads to buffer overflow. It is recommended to upgrade the affected component. | ||||
| CVE-2025-14187 | 1 Ugreen | 1 Dh2100+ | 2026-04-15 | 7.2 High |
| A weakness has been identified in UGREEN DH2100+ up to 5.3.0.251125. This affects the function handler_file_backup_create of the file /v1/file/backup/create of the component nas_svr. Executing a manipulation of the argument path can lead to buffer overflow. The attack can be executed remotely. The exploit has been made available to the public and could be used for attacks. It is recommended to upgrade the affected component. | ||||
| CVE-2024-44067 | 1 Alibaba | 2 T-head Xuantie C910, T-head Xuantie C920 | 2026-04-15 | 8.4 High |
| The T-Head XuanTie C910 CPU in the TH1520 SoC and the T-Head XuanTie C920 CPU in the SOPHON SG2042 have instructions that allow unprivileged attackers to write to arbitrary physical memory locations, aka GhostWrite. | ||||
| CVE-2025-6490 | 2026-04-15 | 3.3 Low | ||
| A vulnerability was found in sparklemotion nokogiri c29c920907366cb74af13b4dc2230e9c9e23b833 and classified as problematic. This issue affects the function hashmap_set_with_hash of the file gumbo-parser/src/hashmap.c. The manipulation leads to heap-based buffer overflow. An attack has to be approached locally. The exploit has been disclosed to the public and may be used. The real existence of this vulnerability is still doubted at the moment. The identifier of the patch is ada4708e5a67114402cd3feb70a4e1d1d7cf773a. It is recommended to apply a patch to fix this issue. The project maintainer explains that the affected code was merged into the main branch but the commit never appeared in an official release. | ||||
| CVE-2025-14196 | 1 H3c | 1 Magic B1 | 2026-04-15 | 8.8 High |
| A weakness has been identified in H3C Magic B1 up to 100R004. The affected element is the function sub_44de0 of the file /goform/aspForm. This manipulation of the argument param causes buffer overflow. Remote exploitation of the attack is possible. The exploit has been made available to the public and could be exploited. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2024-11139 | 2026-04-15 | N/A | ||
| CWE-119: Improper Restriction of Operations within the Bounds of a Memory Buffer vulnerability exists that could allow local attackers to exploit these issues to potentially execute arbitrary code when opening a malicious project file. | ||||
| CVE-2025-15013 | 1 Floooh | 1 Sokol | 2026-04-15 | 5.3 Medium |
| A vulnerability was identified in floooh sokol up to 5d11344150973f15e16d3ec4ee7550a73fb995e0. The impacted element is the function _sg_validate_pipeline_desc in the library sokol_gfx.h. Such manipulation leads to stack-based buffer overflow. The attack must be carried out locally. The exploit is publicly available and might be used. This product utilizes a rolling release system for continuous delivery, and as such, version information for affected or updated releases is not disclosed. The name of the patch is b95c5245ba357967220c9a860c7578a7487937b0. It is best practice to apply a patch to resolve this issue. | ||||
| CVE-2025-1863 | 2026-04-15 | 9.8 Critical | ||
| Insecure default settings have been found in recorder products provided by Yokogawa Electric Corporation. The default setting of the authentication function is disabled on the affected products. Therefore, when connected to a network with default settings, anyone can access all functions related to settings and operations. As a result, an attacker can illegally manipulate and configure important data such as measured values and settings. This issue affects GX10 / GX20 / GP10 / GP20 Paperless Recorders: R5.04.01 or earlier; GM Data Acquisition System: R5.05.01 or earlier; DX1000 / DX2000 / DX1000N Paperless Recorders: R4.21 or earlier; FX1000 Paperless Recorders: R1.31 or earlier; μR10000 / μR20000 Chart Recorders: R1.51 or earlier; MW100 Data Acquisition Units: All versions; DX1000T / DX2000T Paperless Recorders: All versions; CX1000 / CX2000 Paperless Recorders: All versions. | ||||
| CVE-2025-4440 | 1 H3c | 1 Gr-1800ax | 2026-04-15 | 8 High |
| A vulnerability was found in H3C GR-1800AX up to 100R008 and classified as critical. Affected by this issue is the function EnableIpv6 of the file /goform/aspForm. The manipulation of the argument param leads to buffer overflow. Access to the local network is required for this attack to succeed. The exploit has been disclosed to the public and may be used. | ||||
| CVE-2025-4446 | 1 H3c | 1 Gr-5400ax | 2026-04-15 | 8 High |
| A vulnerability has been found in H3C GR-5400AX up to 100R008 and classified as critical. This vulnerability affects the function Edit_List_SSID of the file /goform/aspForm. The manipulation of the argument param leads to buffer overflow. The attack needs to be approached within the local network. | ||||
| CVE-2023-46586 | 1 Weborf Project | 1 Weborf | 2026-04-15 | 9.1 Critical |
| cgi.c in weborf .0.17, 0.18, 0.19, and 0.20 (before 1.0) lacks '\0' termination of the path for CGI scripts because strncpy is misused. | ||||
| CVE-2024-12147 | 1 Netgear | 1 R6900 Firmware | 2026-04-15 | 6.5 Medium |
| A vulnerability was found in Netgear R6900 1.0.1.26_1.0.20. It has been declared as critical. Affected by this vulnerability is an unknown functionality of the file upgrade_check.cgi of the component HTTP Header Handler. The manipulation of the argument Content-Length leads to buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer. | ||||
| CVE-2025-46333 | 2026-04-15 | N/A | ||
| z2d is a pure Zig 2D graphics library. Versions of z2d after `0.5.1` and up to and including `0.6.0`, when writing from one surface to another using `z2d.compositor.StrideCompositor.run`, and higher-level operations when the anti-aliasing mode is set to `.default` (such as `Context.fill`, `Context.stroke`, `painter.fill`, and `painter.stroke`), the source surface can be completely out-of-bounds on the x-axis, but not on the y-axis, by way of a negative offset. This results in an overflow of the value controlling the length of the stride. In non-safe optimization modes (consumers compiling with `ReleaseFast` or `ReleaseSmall`), this could potentially lead to invalid memory accesses or corruption. This issue is patched in version `0.6.1`. Users on an untagged version after `v0.5.1` and before `v0.6.1` are advised to update to address the vulnerability. Those still on Zig `0.13.0` are recommended to downgrade to `v0.5.1`. | ||||
| CVE-2025-46599 | 1 K3s | 1 K3s | 2026-04-15 | 6.8 Medium |
| CNCF K3s 1.32 before 1.32.4-rc1+k3s1 has a Kubernetes kubelet configuration change with the unintended consequence that, in some situations, ReadOnlyPort is set to 10255. For example, the default behavior of a K3s online installation might allow unauthenticated access to this port, exposing credentials. | ||||
| CVE-2025-3588 | 2026-04-15 | 5.3 Medium | ||
| A vulnerability, which was classified as problematic, has been found in joelittlejohn jsonschema2pojo 1.2.2. This issue affects the function apply of the file org/jsonschema2pojo/rules/SchemaRule.java of the component JSON File Handler. The manipulation leads to stack-based buffer overflow. Attacking locally is a requirement. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2025-13566 | 1 Jarun | 1 Nnn | 2026-04-15 | 3.3 Low |
| A security vulnerability has been detected in jarun nnn up to 5.1. The impacted element is the function show_content_in_floating_window/run_cmd_as_plugin of the file nnn/src/nnn.c. The manipulation leads to double free. An attack has to be approached locally. The identifier of the patch is 2f07ccdf21e705377862e5f9dfa31e1694979ac7. It is suggested to install a patch to address this issue. | ||||
| CVE-2024-56433 | 1 Shadow-maint | 1 Shadow-utils | 2026-04-15 | 3.6 Low |
| shadow-utils (aka shadow) 4.4 through 4.17.0 establishes a default /etc/subuid behavior (e.g., uid 100000 through 165535 for the first user account) that can realistically conflict with the uids of users defined on locally administered networks, potentially leading to account takeover, e.g., by leveraging newuidmap for access to an NFS home directory (or same-host resources in the case of remote logins by these local network users). NOTE: it may also be argued that system administrators should not have assigned uids, within local networks, that are within the range that can occur in /etc/subuid. | ||||