Export limit exceeded: 44733 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (44733 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-31696 | 1 Linux | 1 Linux Kernel | 2026-06-01 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix missing validation of ticket length in non-XDR key preparsing In rxrpc_preparse(), there are two paths for parsing key payloads: the XDR path (for large payloads) and the non-XDR path (for payloads <= 28 bytes). While the XDR path (rxrpc_preparse_xdr_rxkad()) correctly validates the ticket length against AFSTOKEN_RK_TIX_MAX, the non-XDR path fails to do so. This allows an unprivileged user to provide a very large ticket length. When this key is later read via rxrpc_read(), the total token size (toksize) calculation results in a value that exceeds AFSTOKEN_LENGTH_MAX, triggering a WARN_ON(). [ 2001.302904] WARNING: CPU: 2 PID: 2108 at net/rxrpc/key.c:778 rxrpc_read+0x109/0x5c0 [rxrpc] Fix this by adding a check in the non-XDR parsing path of rxrpc_preparse() to ensure the ticket length does not exceed AFSTOKEN_RK_TIX_MAX, bringing it into parity with the XDR parsing logic. | ||||
| CVE-2026-31694 | 1 Linux | 1 Linux Kernel | 2026-06-01 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: fuse: reject oversized dirents in page cache fuse_add_dirent_to_cache() computes a serialized dirent size from the server-controlled namelen field and copies the dirent into a single page-cache page. The existing logic only checks whether the dirent fits in the remaining space of the current page and advances to a fresh page if not. It never checks whether the dirent itself exceeds PAGE_SIZE. As a result, a malicious FUSE server can return a dirent with namelen=4095, producing a serialized record size of 4120 bytes. On 4 KiB page systems this causes memcpy() to overflow the cache page by 24 bytes into the following kernel page. Reject dirents that cannot fit in a single page before copying them into the readdir cache. | ||||
| CVE-2026-31685 | 1 Linux | 1 Linux Kernel | 2026-06-01 | 9.4 Critical |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: ip6t_eui64: reject invalid MAC header for all packets `eui64_mt6()` derives a modified EUI-64 from the Ethernet source address and compares it with the low 64 bits of the IPv6 source address. The existing guard only rejects an invalid MAC header when `par->fragoff != 0`. For packets with `par->fragoff == 0`, `eui64_mt6()` can still reach `eth_hdr(skb)` even when the MAC header is not valid. Fix this by removing the `par->fragoff != 0` condition so that packets with an invalid MAC header are rejected before accessing `eth_hdr(skb)`. | ||||
| CVE-2026-31684 | 1 Linux | 1 Linux Kernel | 2026-06-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: sched: act_csum: validate nested VLAN headers tcf_csum_act() walks nested VLAN headers directly from skb->data when an skb still carries in-payload VLAN tags. The current code reads vlan->h_vlan_encapsulated_proto and then pulls VLAN_HLEN bytes without first ensuring that the full VLAN header is present in the linear area. If only part of an inner VLAN header is linearized, accessing h_vlan_encapsulated_proto reads past the linear area, and the following skb_pull(VLAN_HLEN) may violate skb invariants. Fix this by requiring pskb_may_pull(skb, VLAN_HLEN) before accessing and pulling each nested VLAN header. If the header still is not fully available, drop the packet through the existing error path. | ||||
| CVE-2026-31681 | 1 Linux | 1 Linux Kernel | 2026-06-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: xt_multiport: validate range encoding in checkentry ports_match_v1() treats any non-zero pflags entry as the start of a port range and unconditionally consumes the next ports[] element as the range end. The checkentry path currently validates protocol, flags and count, but it does not validate the range encoding itself. As a result, malformed rules can mark the last slot as a range start or place two range starts back to back, leaving ports_match_v1() to step past the last valid ports[] element while interpreting the rule. Reject malformed multiport v1 rules in checkentry by validating that each range start has a following element and that the following element is not itself marked as another range start. | ||||
| CVE-2026-31656 | 1 Linux | 2 Kernel, Linux Kernel | 2026-06-01 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/i915/gt: fix refcount underflow in intel_engine_park_heartbeat A use-after-free / refcount underflow is possible when the heartbeat worker and intel_engine_park_heartbeat() race to release the same engine->heartbeat.systole request. The heartbeat worker reads engine->heartbeat.systole and calls i915_request_put() on it when the request is complete, but clears the pointer in a separate, non-atomic step. Concurrently, a request retirement on another CPU can drop the engine wakeref to zero, triggering __engine_park() -> intel_engine_park_heartbeat(). If the heartbeat timer is pending at that point, cancel_delayed_work() returns true and intel_engine_park_heartbeat() reads the stale non-NULL systole pointer and calls i915_request_put() on it again, causing a refcount underflow: ``` <4> [487.221889] Workqueue: i915-unordered engine_retire [i915] <4> [487.222640] RIP: 0010:refcount_warn_saturate+0x68/0xb0 ... <4> [487.222707] Call Trace: <4> [487.222711] <TASK> <4> [487.222716] intel_engine_park_heartbeat.part.0+0x6f/0x80 [i915] <4> [487.223115] intel_engine_park_heartbeat+0x25/0x40 [i915] <4> [487.223566] __engine_park+0xb9/0x650 [i915] <4> [487.223973] ____intel_wakeref_put_last+0x2e/0xb0 [i915] <4> [487.224408] __intel_wakeref_put_last+0x72/0x90 [i915] <4> [487.224797] intel_context_exit_engine+0x7c/0x80 [i915] <4> [487.225238] intel_context_exit+0xf1/0x1b0 [i915] <4> [487.225695] i915_request_retire.part.0+0x1b9/0x530 [i915] <4> [487.226178] i915_request_retire+0x1c/0x40 [i915] <4> [487.226625] engine_retire+0x122/0x180 [i915] <4> [487.227037] process_one_work+0x239/0x760 <4> [487.227060] worker_thread+0x200/0x3f0 <4> [487.227068] ? __pfx_worker_thread+0x10/0x10 <4> [487.227075] kthread+0x10d/0x150 <4> [487.227083] ? __pfx_kthread+0x10/0x10 <4> [487.227092] ret_from_fork+0x3d4/0x480 <4> [487.227099] ? __pfx_kthread+0x10/0x10 <4> [487.227107] ret_from_fork_asm+0x1a/0x30 <4> [487.227141] </TASK> ``` Fix this by replacing the non-atomic pointer read + separate clear with xchg() in both racing paths. xchg() is a single indivisible hardware instruction that atomically reads the old pointer and writes NULL. This guarantees only one of the two concurrent callers obtains the non-NULL pointer and performs the put, the other gets NULL and skips it. (cherry picked from commit 13238dc0ee4f9ab8dafa2cca7295736191ae2f42) | ||||
| CVE-2026-31630 | 1 Linux | 1 Linux Kernel | 2026-06-01 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: proc: size address buffers for %pISpc output The AF_RXRPC procfs helpers format local and remote socket addresses into fixed 50-byte stack buffers with "%pISpc". That is too small for the longest current-tree IPv6-with-port form the formatter can produce. In lib/vsprintf.c, the compressed IPv6 path uses a dotted-quad tail not only for v4mapped addresses, but also for ISATAP addresses via ipv6_addr_is_isatap(). As a result, a case such as [ffff:ffff:ffff:ffff:0:5efe:255.255.255.255]:65535 is possible with the current formatter. That is 50 visible characters, so 51 bytes including the trailing NUL, which does not fit in the existing char[50] buffers used by net/rxrpc/proc.c. Size the buffers from the formatter's maximum textual form and switch the call sites to scnprintf(). Changes since v1: - correct the changelog to cite the actual maximum current-tree case explicitly - frame the proof around the ISATAP formatting path instead of the earlier mapped-v4 example | ||||
| CVE-2026-31627 | 1 Linux | 1 Linux Kernel | 2026-06-01 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: i2c: s3c24xx: check the size of the SMBUS message before using it The first byte of an i2c SMBUS message is the size, and it should be verified to ensure that it is in the range of 0..I2C_SMBUS_BLOCK_MAX before processing it. This is the same logic that was added in commit a6e04f05ce0b ("i2c: tegra: check msg length in SMBUS block read") to the i2c tegra driver. | ||||
| CVE-2026-31624 | 1 Linux | 1 Linux Kernel | 2026-06-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: HID: core: clamp report_size in s32ton() to avoid undefined shift s32ton() shifts by n-1 where n is the field's report_size, a value that comes directly from a HID device. The HID parser bounds report_size only to <= 256, so a broken HID device can supply a report descriptor with a wide field that triggers shift exponents up to 256 on a 32-bit type when an output report is built via hid_output_field() or hid_set_field(). Commit ec61b41918587 ("HID: core: fix shift-out-of-bounds in hid_report_raw_event") added the same n > 32 clamp to the function snto32(), but s32ton() was never given the same fix as I guess syzbot hadn't figured out how to fuzz a device the same way. Fix this up by just clamping the max value of n, just like snto32() does. | ||||
| CVE-2026-31623 | 1 Linux | 1 Linux Kernel | 2026-06-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: usb: cdc-phonet: fix skb frags[] overflow in rx_complete() A malicious USB device claiming to be a CDC Phonet modem can overflow the skb_shared_info->frags[] array by sending an unbounded sequence of full-page bulk transfers. Drop the skb and increment the length error when the frag limit is reached. This matches the same fix that commit f0813bcd2d9d ("net: wwan: t7xx: fix potential skb->frags overflow in RX path") did for the t7xx driver. | ||||
| CVE-2026-31622 | 1 Linux | 1 Linux Kernel | 2026-06-01 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: NFC: digital: Bounds check NFC-A cascade depth in SDD response handler The NFC-A anti-collision cascade in digital_in_recv_sdd_res() appends 3 or 4 bytes to target->nfcid1 on each round, but the number of cascade rounds is controlled entirely by the peer device. The peer sets the cascade tag in the SDD_RES (deciding 3 vs 4 bytes) and the cascade-incomplete bit in the SEL_RES (deciding whether another round follows). ISO 14443-3 limits NFC-A to three cascade levels and target->nfcid1 is sized accordingly (NFC_NFCID1_MAXSIZE = 10), but nothing in the driver actually enforces this. This means a malicious peer can keep the cascade running, writing past the heap-allocated nfc_target with each round. Fix this by rejecting the response when the accumulated UID would exceed the buffer. Commit e329e71013c9 ("NFC: nci: Bounds check struct nfc_target arrays") fixed similar missing checks against the same field on the NCI path. | ||||
| CVE-2026-31619 | 1 Linux | 1 Linux Kernel | 2026-06-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: fireworks: bound device-supplied status before string array lookup The status field in an EFW response is a 32-bit value supplied by the firewire device. efr_status_names[] has 17 entries so a status value outside that range goes off into the weeds when looking at the %s value. Even worse, the status could return EFR_STATUS_INCOMPLETE which is 0x80000000, and is obviously not in that array of potential strings. Fix this up by properly bounding the index against the array size and printing "unknown" if it's not recognized. | ||||
| CVE-2026-31617 | 1 Linux | 1 Linux Kernel | 2026-06-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_ncm: validate minimum block_len in ncm_unwrap_ntb() The block_len read from the host-supplied NTB header is checked against ntb_max but has no lower bound. When block_len is smaller than opts->ndp_size, the bounds check of: ndp_index > (block_len - opts->ndp_size) will underflow producing a huge unsigned value that ndp_index can never exceed, defeating the check entirely. The same underflow occurs in the datagram index checks against block_len - opts->dpe_size. With those checks neutered, a malicious USB host can choose ndp_index and datagram offsets that point past the actual transfer, and the skb_put_data() copies adjacent kernel memory into the network skb. Fix this by rejecting block lengths that cannot hold at least the NTB header plus one NDP. This will make block_len - opts->ndp_size and block_len - opts->dpe_size both well-defined. Commit 8d2b1a1ec9f5 ("CDC-NCM: avoid overflow in sanity checking") fixed a related class of issues on the host side of NCM. | ||||
| CVE-2026-31615 | 1 Linux | 1 Linux Kernel | 2026-06-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: renesas_usb3: validate endpoint index in standard request handlers The GET_STATUS and SET/CLEAR_FEATURE handlers extract the endpoint number from the host-supplied wIndex without any sort of validation. Fix this up by validating the number of endpoints actually match up with the number the device has before attempting to dereference a pointer based on this math. This is just like what was done in commit ee0d382feb44 ("usb: gadget: aspeed_udc: validate endpoint index for ast udc") for the aspeed driver. | ||||
| CVE-2026-31613 | 1 Linux | 1 Linux Kernel | 2026-06-01 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix OOB reads parsing symlink error response When a CREATE returns STATUS_STOPPED_ON_SYMLINK, smb2_check_message() returns success without any length validation, leaving the symlink parsers as the only defense against an untrusted server. symlink_data() walks SMB 3.1.1 error contexts with the loop test "p < end", but reads p->ErrorId at offset 4 and p->ErrorDataLength at offset 0. When the server-controlled ErrorDataLength advances p to within 1-7 bytes of end, the next iteration will read past it. When the matching context is found, sym->SymLinkErrorTag is read at offset 4 from p->ErrorContextData with no check that the symlink header itself fits. smb2_parse_symlink_response() then bounds-checks the substitute name using SMB2_SYMLINK_STRUCT_SIZE as the offset of PathBuffer from iov_base. That value is computed as sizeof(smb2_err_rsp) + sizeof(smb2_symlink_err_rsp), which is correct only when ErrorContextCount == 0. With at least one error context the symlink data sits 8 bytes deeper, and each skipped non-matching context shifts it further by 8 + ALIGN(ErrorDataLength, 8). The check is too short, allowing the substitute name read to run past iov_len. The out-of-bound heap bytes are UTF-16-decoded into the symlink target and returned to userspace via readlink(2). Fix this all up by making the loops test require the full context header to fit, rejecting sym if its header runs past end, and bound the substitute name against the actual position of sym->PathBuffer rather than a fixed offset. Because sub_offs and sub_len are 16bits, the pointer math will not overflow here with the new greater-than. | ||||
| CVE-2026-31612 | 1 Linux | 1 Linux Kernel | 2026-06-01 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: validate EaNameLength in smb2_get_ea() smb2_get_ea() reads ea_req->EaNameLength from the client request and passes it directly to strncmp() as the comparison length without verifying that the length of the name really is the size of the input buffer received. Fix this up by properly checking the size of the name based on the value received and the overall size of the request, to prevent a later strncmp() call to use the length as a "trusted" size of the buffer. Without this check, uninitialized heap values might be slowly leaked to the client. | ||||
| CVE-2026-31611 | 1 Linux | 1 Linux Kernel | 2026-06-01 | 8.6 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: require 3 sub-authorities before reading sub_auth[2] parse_dacl() compares each ACE SID against sid_unix_NFS_mode and on match reads sid.sub_auth[2] as the file mode. If sid_unix_NFS_mode is the prefix S-1-5-88-3 with num_subauth = 2 then compare_sids() compares only min(num_subauth, 2) sub-authorities so a client SID with num_subauth = 2 and sub_auth = {88, 3} will match. If num_subauth = 2 and the ACE is placed at the very end of the security descriptor, sub_auth[2] will be 4 bytes past end_of_acl. The out-of-band bytes will then be masked to the low 9 bits and applied as the file's POSIX mode, probably not something that is good to have happen. Fix this up by forcing the SID to actually carry a third sub-authority before reading it at all. | ||||
| CVE-2026-31596 | 1 Linux | 1 Linux Kernel | 2026-06-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: handle invalid dinode in ocfs2_group_extend [BUG] kernel BUG at fs/ocfs2/resize.c:308! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI RIP: 0010:ocfs2_group_extend+0x10aa/0x1ae0 fs/ocfs2/resize.c:308 Code: 8b8520ff ffff83f8 860f8580 030000e8 5cc3c1fe Call Trace: ... ocfs2_ioctl+0x175/0x6e0 fs/ocfs2/ioctl.c:869 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:597 [inline] __se_sys_ioctl fs/ioctl.c:583 [inline] __x64_sys_ioctl+0x197/0x1e0 fs/ioctl.c:583 x64_sys_call+0x1144/0x26a0 arch/x86/include/generated/asm/syscalls_64.h:17 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x93/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x76/0x7e ... [CAUSE] ocfs2_group_extend() assumes that the global bitmap inode block returned from ocfs2_inode_lock() has already been validated and BUG_ONs when the signature is not a dinode. That assumption is too strong for crafted filesystems because the JBD2-managed buffer path can bypass structural validation and return an invalid dinode to the resize ioctl. [FIX] Validate the dinode explicitly in ocfs2_group_extend(). If the global bitmap buffer does not contain a valid dinode, report filesystem corruption with ocfs2_error() and fail the resize operation instead of crashing the kernel. | ||||
| CVE-2026-31590 | 1 Linux | 1 Linux Kernel | 2026-06-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: SEV: Drop WARN on large size for KVM_MEMORY_ENCRYPT_REG_REGION Drop the WARN in sev_pin_memory() on npages overflowing an int, as the WARN is comically trivially to trigger from userspace, e.g. by doing: struct kvm_enc_region range = { .addr = 0, .size = -1ul, }; __vm_ioctl(vm, KVM_MEMORY_ENCRYPT_REG_REGION, &range); Note, the checks in sev_mem_enc_register_region() that presumably exist to verify the incoming address+size are completely worthless, as both "addr" and "size" are u64s and SEV is 64-bit only, i.e. they _can't_ be greater than ULONG_MAX. That wart will be cleaned up in the near future. if (range->addr > ULONG_MAX || range->size > ULONG_MAX) return -EINVAL; Opportunistically add a comment to explain why the code calculates the number of pages the "hard" way, e.g. instead of just shifting @ulen. | ||||
| CVE-2026-31489 | 1 Linux | 1 Linux Kernel | 2026-06-01 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: spi: meson-spicc: Fix double-put in remove path meson_spicc_probe() registers the controller with devm_spi_register_controller(), so teardown already drops the controller reference via devm cleanup. Calling spi_controller_put() again in meson_spicc_remove() causes a double-put. | ||||