Export limit exceeded: 19676 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (19676 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-40169 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Reject negative offsets for ALU ops When verifying BPF programs, the check_alu_op() function validates instructions with ALU operations. The 'offset' field in these instructions is a signed 16-bit integer. The existing check 'insn->off > 1' was intended to ensure the offset is either 0, or 1 for BPF_MOD/BPF_DIV. However, because 'insn->off' is signed, this check incorrectly accepts all negative values (e.g., -1). This commit tightens the validation by changing the condition to '(insn->off != 0 && insn->off != 1)'. This ensures that any value other than the explicitly permitted 0 and 1 is rejected, hardening the verifier against malformed BPF programs. | ||||
| CVE-2025-40175 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: idpf: cleanup remaining SKBs in PTP flows When the driver requests Tx timestamp value, one of the first steps is to clone SKB using skb_get. It increases the reference counter for that SKB to prevent unexpected freeing by another component. However, there may be a case where the index is requested, SKB is assigned and never consumed by PTP flows - for example due to reset during running PTP apps. Add a check in release timestamping function to verify if the SKB assigned to Tx timestamp latch was freed, and release remaining SKBs. | ||||
| CVE-2025-40194 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: cpufreq: intel_pstate: Fix object lifecycle issue in update_qos_request() The cpufreq_cpu_put() call in update_qos_request() takes place too early because the latter subsequently calls freq_qos_update_request() that indirectly accesses the policy object in question through the QoS request object passed to it. Fortunately, update_qos_request() is called under intel_pstate_driver_lock, so this issue does not matter for changing the intel_pstate operation mode, but it theoretically can cause a crash to occur on CPU device hot removal (which currently can only happen in virt, but it is formally supported nevertheless). Address this issue by modifying update_qos_request() to drop the reference to the policy later. | ||||
| CVE-2025-40216 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: io_uring/rsrc: don't rely on user vaddr alignment There is no guaranteed alignment for user pointers, however the calculation of an offset of the first page into a folio after coalescing uses some weird bit mask logic, get rid of it. | ||||
| CVE-2025-40221 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: pci: mg4b: fix uninitialized iio scan data Fix potential leak of uninitialized stack data to userspace by ensuring that the `scan` structure is zeroed before use. | ||||
| CVE-2025-40222 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tty: serial: sh-sci: fix RSCI FIFO overrun handling The receive error handling code is shared between RSCI and all other SCIF port types, but the RSCI overrun_reg is specified as a memory offset, while for other SCIF types it is an enum value used to index into the sci_port_params->regs array, as mentioned above the sci_serial_in() function. For RSCI, the overrun_reg is CSR (0x48), causing the sci_getreg() call inside the sci_handle_fifo_overrun() function to index outside the bounds of the regs array, which currently has a size of 20, as specified by SCI_NR_REGS. Because of this, we end up accessing memory outside of RSCI's rsci_port_params structure, which, when interpreted as a plat_sci_reg, happens to have a non-zero size, causing the following WARN when sci_serial_in() is called, as the accidental size does not match the supported register sizes. The existence of the overrun_reg needs to be checked because SCIx_SH3_SCIF_REGTYPE has overrun_reg set to SCLSR, but SCLSR is not present in the regs array. Avoid calling sci_getreg() for port types which don't use standard register handling. Use the ops->read_reg() and ops->write_reg() functions to properly read and write registers for RSCI, and change the type of the status variable to accommodate the 32-bit CSR register. sci_getreg() and sci_serial_in() are also called with overrun_reg in the sci_mpxed_interrupt() interrupt handler, but that code path is not used for RSCI, as it does not have a muxed interrupt. ------------[ cut here ]------------ Invalid register access WARNING: CPU: 0 PID: 0 at drivers/tty/serial/sh-sci.c:522 sci_serial_in+0x38/0xac Modules linked in: renesas_usbhs at24 rzt2h_adc industrialio_adc sha256 cfg80211 bluetooth ecdh_generic ecc rfkill fuse drm backlight ipv6 CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.17.0-rc1+ #30 PREEMPT Hardware name: Renesas RZ/T2H EVK Board based on r9a09g077m44 (DT) pstate: 604000c5 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : sci_serial_in+0x38/0xac lr : sci_serial_in+0x38/0xac sp : ffff800080003e80 x29: ffff800080003e80 x28: ffff800082195b80 x27: 000000000000000d x26: ffff8000821956d0 x25: 0000000000000000 x24: ffff800082195b80 x23: ffff000180e0d800 x22: 0000000000000010 x21: 0000000000000000 x20: 0000000000000010 x19: ffff000180e72000 x18: 000000000000000a x17: ffff8002bcee7000 x16: ffff800080000000 x15: 0720072007200720 x14: 0720072007200720 x13: 0720072007200720 x12: 0720072007200720 x11: 0000000000000058 x10: 0000000000000018 x9 : ffff8000821a6a48 x8 : 0000000000057fa8 x7 : 0000000000000406 x6 : ffff8000821fea48 x5 : ffff00033ef88408 x4 : ffff8002bcee7000 x3 : ffff800082195b80 x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff800082195b80 Call trace: sci_serial_in+0x38/0xac (P) sci_handle_fifo_overrun.isra.0+0x70/0x134 sci_er_interrupt+0x50/0x39c __handle_irq_event_percpu+0x48/0x140 handle_irq_event+0x44/0xb0 handle_fasteoi_irq+0xf4/0x1a0 handle_irq_desc+0x34/0x58 generic_handle_domain_irq+0x1c/0x28 gic_handle_irq+0x4c/0x140 call_on_irq_stack+0x30/0x48 do_interrupt_handler+0x80/0x84 el1_interrupt+0x34/0x68 el1h_64_irq_handler+0x18/0x24 el1h_64_irq+0x6c/0x70 default_idle_call+0x28/0x58 (P) do_idle+0x1f8/0x250 cpu_startup_entry+0x34/0x3c rest_init+0xd8/0xe0 console_on_rootfs+0x0/0x6c __primary_switched+0x88/0x90 ---[ end trace 0000000000000000 ]--- | ||||
| CVE-2025-40227 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/damon/sysfs: dealloc commit test ctx always The damon_ctx for testing online DAMON parameters commit inputs is deallocated only when the test fails. This means memory is leaked for every successful online DAMON parameters commit. Fix the leak by always deallocating it. | ||||
| CVE-2025-40235 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: directly free partially initialized fs_info in btrfs_check_leaked_roots() If fs_info->super_copy or fs_info->super_for_commit allocated failed in btrfs_get_tree_subvol(), then no need to call btrfs_free_fs_info(). Otherwise btrfs_check_leaked_roots() would access NULL pointer because fs_info->allocated_roots had not been initialised. syzkaller reported the following information: ------------[ cut here ]------------ BUG: unable to handle page fault for address: fffffffffffffbb0 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 64c9067 P4D 64c9067 PUD 64cb067 PMD 0 Oops: Oops: 0000 [#1] SMP KASAN PTI CPU: 0 UID: 0 PID: 1402 Comm: syz.1.35 Not tainted 6.15.8 #4 PREEMPT(lazy) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), (...) RIP: 0010:arch_atomic_read arch/x86/include/asm/atomic.h:23 [inline] RIP: 0010:raw_atomic_read include/linux/atomic/atomic-arch-fallback.h:457 [inline] RIP: 0010:atomic_read include/linux/atomic/atomic-instrumented.h:33 [inline] RIP: 0010:refcount_read include/linux/refcount.h:170 [inline] RIP: 0010:btrfs_check_leaked_roots+0x18f/0x2c0 fs/btrfs/disk-io.c:1230 [...] Call Trace: <TASK> btrfs_free_fs_info+0x310/0x410 fs/btrfs/disk-io.c:1280 btrfs_get_tree_subvol+0x592/0x6b0 fs/btrfs/super.c:2029 btrfs_get_tree+0x63/0x80 fs/btrfs/super.c:2097 vfs_get_tree+0x98/0x320 fs/super.c:1759 do_new_mount+0x357/0x660 fs/namespace.c:3899 path_mount+0x716/0x19c0 fs/namespace.c:4226 do_mount fs/namespace.c:4239 [inline] __do_sys_mount fs/namespace.c:4450 [inline] __se_sys_mount fs/namespace.c:4427 [inline] __x64_sys_mount+0x28c/0x310 fs/namespace.c:4427 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x92/0x180 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f032eaffa8d [...] | ||||
| CVE-2025-40243 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hfs: fix KMSAN uninit-value issue in hfs_find_set_zero_bits() The syzbot reported issue in hfs_find_set_zero_bits(): ===================================================== BUG: KMSAN: uninit-value in hfs_find_set_zero_bits+0x74d/0xb60 fs/hfs/bitmap.c:45 hfs_find_set_zero_bits+0x74d/0xb60 fs/hfs/bitmap.c:45 hfs_vbm_search_free+0x13c/0x5b0 fs/hfs/bitmap.c:151 hfs_extend_file+0x6a5/0x1b00 fs/hfs/extent.c:408 hfs_get_block+0x435/0x1150 fs/hfs/extent.c:353 __block_write_begin_int+0xa76/0x3030 fs/buffer.c:2151 block_write_begin fs/buffer.c:2262 [inline] cont_write_begin+0x10e1/0x1bc0 fs/buffer.c:2601 hfs_write_begin+0x85/0x130 fs/hfs/inode.c:52 cont_expand_zero fs/buffer.c:2528 [inline] cont_write_begin+0x35a/0x1bc0 fs/buffer.c:2591 hfs_write_begin+0x85/0x130 fs/hfs/inode.c:52 hfs_file_truncate+0x1d6/0xe60 fs/hfs/extent.c:494 hfs_inode_setattr+0x964/0xaa0 fs/hfs/inode.c:654 notify_change+0x1993/0x1aa0 fs/attr.c:552 do_truncate+0x28f/0x310 fs/open.c:68 do_ftruncate+0x698/0x730 fs/open.c:195 do_sys_ftruncate fs/open.c:210 [inline] __do_sys_ftruncate fs/open.c:215 [inline] __se_sys_ftruncate fs/open.c:213 [inline] __x64_sys_ftruncate+0x11b/0x250 fs/open.c:213 x64_sys_call+0xfe3/0x3db0 arch/x86/include/generated/asm/syscalls_64.h:78 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xd9/0x210 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was created at: slab_post_alloc_hook mm/slub.c:4154 [inline] slab_alloc_node mm/slub.c:4197 [inline] __kmalloc_cache_noprof+0x7f7/0xed0 mm/slub.c:4354 kmalloc_noprof include/linux/slab.h:905 [inline] hfs_mdb_get+0x1cc8/0x2a90 fs/hfs/mdb.c:175 hfs_fill_super+0x3d0/0xb80 fs/hfs/super.c:337 get_tree_bdev_flags+0x6e3/0x920 fs/super.c:1681 get_tree_bdev+0x38/0x50 fs/super.c:1704 hfs_get_tree+0x35/0x40 fs/hfs/super.c:388 vfs_get_tree+0xb0/0x5c0 fs/super.c:1804 do_new_mount+0x738/0x1610 fs/namespace.c:3902 path_mount+0x6db/0x1e90 fs/namespace.c:4226 do_mount fs/namespace.c:4239 [inline] __do_sys_mount fs/namespace.c:4450 [inline] __se_sys_mount+0x6eb/0x7d0 fs/namespace.c:4427 __x64_sys_mount+0xe4/0x150 fs/namespace.c:4427 x64_sys_call+0xfa7/0x3db0 arch/x86/include/generated/asm/syscalls_64.h:166 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xd9/0x210 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f CPU: 1 UID: 0 PID: 12609 Comm: syz.1.2692 Not tainted 6.16.0-syzkaller #0 PREEMPT(none) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/12/2025 ===================================================== The HFS_SB(sb)->bitmap buffer is allocated in hfs_mdb_get(): HFS_SB(sb)->bitmap = kmalloc(8192, GFP_KERNEL); Finally, it can trigger the reported issue because kmalloc() doesn't clear the allocated memory. If allocated memory contains only zeros, then everything will work pretty fine. But if the allocated memory contains the "garbage", then it can affect the bitmap operations and it triggers the reported issue. This patch simply exchanges the kmalloc() on kzalloc() with the goal to guarantee the correctness of bitmap operations. Because, newly created allocation bitmap should have all available blocks free. Potentially, initialization bitmap's read operation could not fill the whole allocated memory and "garbage" in the not initialized memory will be the reason of volume coruptions and file system driver bugs. | ||||
| CVE-2025-40249 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: gpio: cdev: make sure the cdev fd is still active before emitting events With the final call to fput() on a file descriptor, the release action may be deferred and scheduled on a work queue. The reference count of that descriptor is still zero and it must not be used. It's possible that a GPIO change, we want to notify the user-space about, happens AFTER the reference count on the file descriptor associated with the character device went down to zero but BEFORE the .release() callback was called from the workqueue and so BEFORE we unregistered from the notifier. Using the regular get_file() routine in this situation triggers the following warning: struct file::f_count incremented from zero; use-after-free condition present! So use the get_file_active() variant that will return NULL on file descriptors that have been or are being released. | ||||
| CVE-2025-71067 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: set dummy blocksize to read boot_block when mounting When mounting, sb->s_blocksize is used to read the boot_block without being defined or validated. Set a dummy blocksize before attempting to read the boot_block. The issue can be triggered with the following syz reproducer: mkdirat(0xffffffffffffff9c, &(0x7f0000000080)='./file1\x00', 0x0) r4 = openat$nullb(0xffffffffffffff9c, &(0x7f0000000040), 0x121403, 0x0) ioctl$FS_IOC_SETFLAGS(r4, 0x40081271, &(0x7f0000000980)=0x4000) mount(&(0x7f0000000140)=@nullb, &(0x7f0000000040)='./cgroup\x00', &(0x7f0000000000)='ntfs3\x00', 0x2208004, 0x0) syz_clone(0x88200200, 0x0, 0x0, 0x0, 0x0, 0x0) Here, the ioctl sets the bdev block size to 16384. During mount, get_tree_bdev_flags() calls sb_set_blocksize(sb, block_size(bdev)), but since block_size(bdev) > PAGE_SIZE, sb_set_blocksize() leaves sb->s_blocksize at zero. Later, ntfs_init_from_boot() attempts to read the boot_block while sb->s_blocksize is still zero, which triggers the bug. [almaz.alexandrovich@paragon-software.com: changed comment style, added return value handling] | ||||
| CVE-2025-71069 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: invalidate dentry cache on failed whiteout creation F2FS can mount filesystems with corrupted directory depth values that get runtime-clamped to MAX_DIR_HASH_DEPTH. When RENAME_WHITEOUT operations are performed on such directories, f2fs_rename performs directory modifications (updating target entry and deleting source entry) before attempting to add the whiteout entry via f2fs_add_link. If f2fs_add_link fails due to the corrupted directory structure, the function returns an error to VFS, but the partial directory modifications have already been committed to disk. VFS assumes the entire rename operation failed and does not update the dentry cache, leaving stale mappings. In the error path, VFS does not call d_move() to update the dentry cache. This results in new_dentry still pointing to the old inode (new_inode) which has already had its i_nlink decremented to zero. The stale cache causes subsequent operations to incorrectly reference the freed inode. This causes subsequent operations to use cached dentry information that no longer matches the on-disk state. When a second rename targets the same entry, VFS attempts to decrement i_nlink on the stale inode, which may already have i_nlink=0, triggering a WARNING in drop_nlink(). Example sequence: 1. First rename (RENAME_WHITEOUT): file2 → file1 - f2fs updates file1 entry on disk (points to inode 8) - f2fs deletes file2 entry on disk - f2fs_add_link(whiteout) fails (corrupted directory) - Returns error to VFS - VFS does not call d_move() due to error - VFS cache still has: file1 → inode 7 (stale!) - inode 7 has i_nlink=0 (already decremented) 2. Second rename: file3 → file1 - VFS uses stale cache: file1 → inode 7 - Tries to drop_nlink on inode 7 (i_nlink already 0) - WARNING in drop_nlink() Fix this by explicitly invalidating old_dentry and new_dentry when f2fs_add_link fails during whiteout creation. This forces VFS to refresh from disk on subsequent operations, ensuring cache consistency even when the rename partially succeeds. Reproducer: 1. Mount F2FS image with corrupted i_current_depth 2. renameat2(file2, file1, RENAME_WHITEOUT) 3. renameat2(file3, file1, 0) 4. System triggers WARNING in drop_nlink() | ||||
| CVE-2025-40004 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/9p: Fix buffer overflow in USB transport layer A buffer overflow vulnerability exists in the USB 9pfs transport layer where inconsistent size validation between packet header parsing and actual data copying allows a malicious USB host to overflow heap buffers. The issue occurs because: - usb9pfs_rx_header() validates only the declared size in packet header - usb9pfs_rx_complete() uses req->actual (actual received bytes) for memcpy This allows an attacker to craft packets with small declared size (bypassing validation) but large actual payload (triggering overflow in memcpy). Add validation in usb9pfs_rx_complete() to ensure req->actual does not exceed the buffer capacity before copying data. | ||||
| CVE-2025-40033 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: remoteproc: pru: Fix potential NULL pointer dereference in pru_rproc_set_ctable() pru_rproc_set_ctable() accessed rproc->priv before the IS_ERR_OR_NULL check, which could lead to a null pointer dereference. Move the pru assignment, ensuring we never dereference a NULL rproc pointer. | ||||
| CVE-2023-53718 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Do not swap cpu_buffer during resize process When ring_buffer_swap_cpu was called during resize process, the cpu buffer was swapped in the middle, resulting in incorrect state. Continuing to run in the wrong state will result in oops. This issue can be easily reproduced using the following two scripts: /tmp # cat test1.sh //#! /bin/sh for i in `seq 0 100000` do echo 2000 > /sys/kernel/debug/tracing/buffer_size_kb sleep 0.5 echo 5000 > /sys/kernel/debug/tracing/buffer_size_kb sleep 0.5 done /tmp # cat test2.sh //#! /bin/sh for i in `seq 0 100000` do echo irqsoff > /sys/kernel/debug/tracing/current_tracer sleep 1 echo nop > /sys/kernel/debug/tracing/current_tracer sleep 1 done /tmp # ./test1.sh & /tmp # ./test2.sh & A typical oops log is as follows, sometimes with other different oops logs. [ 231.711293] WARNING: CPU: 0 PID: 9 at kernel/trace/ring_buffer.c:2026 rb_update_pages+0x378/0x3f8 [ 231.713375] Modules linked in: [ 231.714735] CPU: 0 PID: 9 Comm: kworker/0:1 Tainted: G W 6.5.0-rc1-00276-g20edcec23f92 #15 [ 231.716750] Hardware name: linux,dummy-virt (DT) [ 231.718152] Workqueue: events update_pages_handler [ 231.719714] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 231.721171] pc : rb_update_pages+0x378/0x3f8 [ 231.722212] lr : rb_update_pages+0x25c/0x3f8 [ 231.723248] sp : ffff800082b9bd50 [ 231.724169] x29: ffff800082b9bd50 x28: ffff8000825f7000 x27: 0000000000000000 [ 231.726102] x26: 0000000000000001 x25: fffffffffffff010 x24: 0000000000000ff0 [ 231.728122] x23: ffff0000c3a0b600 x22: ffff0000c3a0b5c0 x21: fffffffffffffe0a [ 231.730203] x20: ffff0000c3a0b600 x19: ffff0000c0102400 x18: 0000000000000000 [ 231.732329] x17: 0000000000000000 x16: 0000000000000000 x15: 0000ffffe7aa8510 [ 231.734212] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000002 [ 231.736291] x11: ffff8000826998a8 x10: ffff800082b9baf0 x9 : ffff800081137558 [ 231.738195] x8 : fffffc00030e82c8 x7 : 0000000000000000 x6 : 0000000000000001 [ 231.740192] x5 : ffff0000ffbafe00 x4 : 0000000000000000 x3 : 0000000000000000 [ 231.742118] x2 : 00000000000006aa x1 : 0000000000000001 x0 : ffff0000c0007208 [ 231.744196] Call trace: [ 231.744892] rb_update_pages+0x378/0x3f8 [ 231.745893] update_pages_handler+0x1c/0x38 [ 231.746893] process_one_work+0x1f0/0x468 [ 231.747852] worker_thread+0x54/0x410 [ 231.748737] kthread+0x124/0x138 [ 231.749549] ret_from_fork+0x10/0x20 [ 231.750434] ---[ end trace 0000000000000000 ]--- [ 233.720486] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 233.721696] Mem abort info: [ 233.721935] ESR = 0x0000000096000004 [ 233.722283] EC = 0x25: DABT (current EL), IL = 32 bits [ 233.722596] SET = 0, FnV = 0 [ 233.722805] EA = 0, S1PTW = 0 [ 233.723026] FSC = 0x04: level 0 translation fault [ 233.723458] Data abort info: [ 233.723734] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 233.724176] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 233.724589] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 233.725075] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000104943000 [ 233.725592] [0000000000000000] pgd=0000000000000000, p4d=0000000000000000 [ 233.726231] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [ 233.726720] Modules linked in: [ 233.727007] CPU: 0 PID: 9 Comm: kworker/0:1 Tainted: G W 6.5.0-rc1-00276-g20edcec23f92 #15 [ 233.727777] Hardware name: linux,dummy-virt (DT) [ 233.728225] Workqueue: events update_pages_handler [ 233.728655] pstate: 200000c5 (nzCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 233.729054] pc : rb_update_pages+0x1a8/0x3f8 [ 233.729334] lr : rb_update_pages+0x154/0x3f8 [ 233.729592] sp : ffff800082b9bd50 [ 233.729792] x29: ffff800082b9bd50 x28: ffff8000825f7000 x27: 00000000 ---truncated--- | ||||
| CVE-2023-53747 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: vc_screen: reload load of struct vc_data pointer in vcs_write() to avoid UAF After a call to console_unlock() in vcs_write() the vc_data struct can be freed by vc_port_destruct(). Because of that, the struct vc_data pointer must be reloaded in the while loop in vcs_write() after console_lock() to avoid a UAF when vcs_size() is called. Syzkaller reported a UAF in vcs_size(). BUG: KASAN: slab-use-after-free in vcs_size (drivers/tty/vt/vc_screen.c:215) Read of size 4 at addr ffff8880beab89a8 by task repro_vcs_size/4119 Call Trace: <TASK> __asan_report_load4_noabort (mm/kasan/report_generic.c:380) vcs_size (drivers/tty/vt/vc_screen.c:215) vcs_write (drivers/tty/vt/vc_screen.c:664) vfs_write (fs/read_write.c:582 fs/read_write.c:564) ... <TASK> Allocated by task 1213: kmalloc_trace (mm/slab_common.c:1064) vc_allocate (./include/linux/slab.h:559 ./include/linux/slab.h:680 drivers/tty/vt/vt.c:1078 drivers/tty/vt/vt.c:1058) con_install (drivers/tty/vt/vt.c:3334) tty_init_dev (drivers/tty/tty_io.c:1303 drivers/tty/tty_io.c:1415 drivers/tty/tty_io.c:1392) tty_open (drivers/tty/tty_io.c:2082 drivers/tty/tty_io.c:2128) chrdev_open (fs/char_dev.c:415) do_dentry_open (fs/open.c:921) vfs_open (fs/open.c:1052) ... Freed by task 4116: kfree (mm/slab_common.c:1016) vc_port_destruct (drivers/tty/vt/vt.c:1044) tty_port_destructor (drivers/tty/tty_port.c:296) tty_port_put (drivers/tty/tty_port.c:312) vt_disallocate_all (drivers/tty/vt/vt_ioctl.c:662 (discriminator 2)) vt_ioctl (drivers/tty/vt/vt_ioctl.c:903) tty_ioctl (drivers/tty/tty_io.c:2778) ... The buggy address belongs to the object at ffff8880beab8800 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 424 bytes inside of freed 1024-byte region [ffff8880beab8800, ffff8880beab8c00) The buggy address belongs to the physical page: page:00000000afc77580 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0xbeab8 head:00000000afc77580 order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0 flags: 0xfffffc0010200(slab|head|node=0|zone=1|lastcpupid=0x1fffff) page_type: 0xffffffff() raw: 000fffffc0010200 ffff888100042dc0 ffffea000426de00 dead000000000002 raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8880beab8880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8880beab8900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8880beab8980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8880beab8a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8880beab8a80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== Disabling lock debugging due to kernel taint | ||||
| CVE-2023-53748 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: mediatek: vcodec: Fix potential array out-of-bounds in decoder queue_setup variable *nplanes is provided by user via system call argument. The possible value of q_data->fmt->num_planes is 1-3, while the value of *nplanes can be 1-8. The array access by index i can cause array out-of-bounds. Fix this bug by checking *nplanes against the array size. | ||||
| CVE-2023-53751 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: cifs: fix potential use-after-free bugs in TCP_Server_Info::hostname TCP_Server_Info::hostname may be updated once or many times during reconnect, so protect its access outside reconnect path as well and then prevent any potential use-after-free bugs. | ||||
| CVE-2023-53752 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: deal with integer overflows in kmalloc_reserve() Blamed commit changed: ptr = kmalloc(size); if (ptr) size = ksize(ptr); size = kmalloc_size_roundup(size); ptr = kmalloc(size); This allowed various crash as reported by syzbot [1] and Kyle Zeng. Problem is that if @size is bigger than 0x80000001, kmalloc_size_roundup(size) returns 2^32. kmalloc_reserve() uses a 32bit variable (obj_size), so 2^32 is truncated to 0. kmalloc(0) returns ZERO_SIZE_PTR which is not handled by skb allocations. Following trace can be triggered if a netdev->mtu is set close to 0x7fffffff We might in the future limit netdev->mtu to more sensible limit (like KMALLOC_MAX_SIZE). This patch is based on a syzbot report, and also a report and tentative fix from Kyle Zeng. [1] BUG: KASAN: user-memory-access in __build_skb_around net/core/skbuff.c:294 [inline] BUG: KASAN: user-memory-access in __alloc_skb+0x3c4/0x6e8 net/core/skbuff.c:527 Write of size 32 at addr 00000000fffffd10 by task syz-executor.4/22554 CPU: 1 PID: 22554 Comm: syz-executor.4 Not tainted 6.1.39-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/03/2023 Call trace: dump_backtrace+0x1c8/0x1f4 arch/arm64/kernel/stacktrace.c:279 show_stack+0x2c/0x3c arch/arm64/kernel/stacktrace.c:286 __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x120/0x1a0 lib/dump_stack.c:106 print_report+0xe4/0x4b4 mm/kasan/report.c:398 kasan_report+0x150/0x1ac mm/kasan/report.c:495 kasan_check_range+0x264/0x2a4 mm/kasan/generic.c:189 memset+0x40/0x70 mm/kasan/shadow.c:44 __build_skb_around net/core/skbuff.c:294 [inline] __alloc_skb+0x3c4/0x6e8 net/core/skbuff.c:527 alloc_skb include/linux/skbuff.h:1316 [inline] igmpv3_newpack+0x104/0x1088 net/ipv4/igmp.c:359 add_grec+0x81c/0x1124 net/ipv4/igmp.c:534 igmpv3_send_cr net/ipv4/igmp.c:667 [inline] igmp_ifc_timer_expire+0x1b0/0x1008 net/ipv4/igmp.c:810 call_timer_fn+0x1c0/0x9f0 kernel/time/timer.c:1474 expire_timers kernel/time/timer.c:1519 [inline] __run_timers+0x54c/0x710 kernel/time/timer.c:1790 run_timer_softirq+0x28/0x4c kernel/time/timer.c:1803 _stext+0x380/0xfbc ____do_softirq+0x14/0x20 arch/arm64/kernel/irq.c:79 call_on_irq_stack+0x24/0x4c arch/arm64/kernel/entry.S:891 do_softirq_own_stack+0x20/0x2c arch/arm64/kernel/irq.c:84 invoke_softirq kernel/softirq.c:437 [inline] __irq_exit_rcu+0x1c0/0x4cc kernel/softirq.c:683 irq_exit_rcu+0x14/0x78 kernel/softirq.c:695 el0_interrupt+0x7c/0x2e0 arch/arm64/kernel/entry-common.c:717 __el0_irq_handler_common+0x18/0x24 arch/arm64/kernel/entry-common.c:724 el0t_64_irq_handler+0x10/0x1c arch/arm64/kernel/entry-common.c:729 el0t_64_irq+0x1a0/0x1a4 arch/arm64/kernel/entry.S:584 | ||||
| CVE-2023-53816 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: fix potential kgd_mem UAFs kgd_mem pointers returned by kfd_process_device_translate_handle are only guaranteed to be valid while p->mutex is held. As soon as the mutex is unlocked, another thread can free the BO. | ||||