Export limit exceeded: 19593 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (19593 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-40172 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: accel/qaic: Treat remaining == 0 as error in find_and_map_user_pages() Currently, if find_and_map_user_pages() takes a DMA xfer request from the user with a length field set to 0, or in a rare case, the host receives QAIC_TRANS_DMA_XFER_CONT from the device where resources->xferred_dma_size is equal to the requested transaction size, the function will return 0 before allocating an sgt or setting the fields of the dma_xfer struct. In that case, encode_addr_size_pairs() will try to access the sgt which will lead to a general protection fault. Return an EINVAL in case the user provides a zero-sized ALP, or the device requests continuation after all of the bytes have been transferred. | ||||
| CVE-2023-54190 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: leds: led-core: Fix refcount leak in of_led_get() class_find_device_by_of_node() calls class_find_device(), it will take the reference, use the put_device() to drop the reference when not need anymore. | ||||
| CVE-2025-40173 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net/ip6_tunnel: Prevent perpetual tunnel growth Similarly to ipv4 tunnel, ipv6 version updates dev->needed_headroom, too. While ipv4 tunnel headroom adjustment growth was limited in commit 5ae1e9922bbd ("net: ip_tunnel: prevent perpetual headroom growth"), ipv6 tunnel yet increases the headroom without any ceiling. Reflect ipv4 tunnel headroom adjustment limit on ipv6 version. Credits to Francesco Ruggeri, who was originally debugging this issue and wrote local Arista-specific patch and a reproducer. | ||||
| CVE-2023-54191 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: fix memory leak in mt7996_mcu_exit Always purge mcu skb queues in mt7996_mcu_exit routine even if mt7996_firmware_state fails. | ||||
| CVE-2023-54196 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Fix NULL pointer dereference in 'ni_write_inode' Syzbot found the following issue: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000016 Mem abort info: ESR = 0x0000000096000006 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x06: level 2 translation fault Data abort info: ISV = 0, ISS = 0x00000006 CM = 0, WnR = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=000000010af56000 [0000000000000016] pgd=08000001090da003, p4d=08000001090da003, pud=08000001090ce003, pmd=0000000000000000 Internal error: Oops: 0000000096000006 [#1] PREEMPT SMP Modules linked in: CPU: 1 PID: 3036 Comm: syz-executor206 Not tainted 6.0.0-rc6-syzkaller-17739-g16c9f284e746 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/26/2022 pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : is_rec_inuse fs/ntfs3/ntfs.h:313 [inline] pc : ni_write_inode+0xac/0x798 fs/ntfs3/frecord.c:3232 lr : ni_write_inode+0xa0/0x798 fs/ntfs3/frecord.c:3226 sp : ffff8000126c3800 x29: ffff8000126c3860 x28: 0000000000000000 x27: ffff0000c8b02000 x26: ffff0000c7502320 x25: ffff0000c7502288 x24: 0000000000000000 x23: ffff80000cbec91c x22: ffff0000c8b03000 x21: ffff0000c8b02000 x20: 0000000000000001 x19: ffff0000c75024d8 x18: 00000000000000c0 x17: ffff80000dd1b198 x16: ffff80000db59158 x15: ffff0000c4b6b500 x14: 00000000000000b8 x13: 0000000000000000 x12: ffff0000c4b6b500 x11: ff80800008be1b60 x10: 0000000000000000 x9 : ffff0000c4b6b500 x8 : 0000000000000000 x7 : ffff800008be1b50 x6 : 0000000000000000 x5 : 0000000000000000 x4 : 0000000000000001 x3 : 0000000000000000 x2 : 0000000000000008 x1 : 0000000000000001 x0 : 0000000000000000 Call trace: is_rec_inuse fs/ntfs3/ntfs.h:313 [inline] ni_write_inode+0xac/0x798 fs/ntfs3/frecord.c:3232 ntfs_evict_inode+0x54/0x84 fs/ntfs3/inode.c:1744 evict+0xec/0x334 fs/inode.c:665 iput_final fs/inode.c:1748 [inline] iput+0x2c4/0x324 fs/inode.c:1774 ntfs_new_inode+0x7c/0xe0 fs/ntfs3/fsntfs.c:1660 ntfs_create_inode+0x20c/0xe78 fs/ntfs3/inode.c:1278 ntfs_create+0x54/0x74 fs/ntfs3/namei.c:100 lookup_open fs/namei.c:3413 [inline] open_last_lookups fs/namei.c:3481 [inline] path_openat+0x804/0x11c4 fs/namei.c:3688 do_filp_open+0xdc/0x1b8 fs/namei.c:3718 do_sys_openat2+0xb8/0x22c fs/open.c:1311 do_sys_open fs/open.c:1327 [inline] __do_sys_openat fs/open.c:1343 [inline] __se_sys_openat fs/open.c:1338 [inline] __arm64_sys_openat+0xb0/0xe0 fs/open.c:1338 __invoke_syscall arch/arm64/kernel/syscall.c:38 [inline] invoke_syscall arch/arm64/kernel/syscall.c:52 [inline] el0_svc_common+0x138/0x220 arch/arm64/kernel/syscall.c:142 do_el0_svc+0x48/0x164 arch/arm64/kernel/syscall.c:206 el0_svc+0x58/0x150 arch/arm64/kernel/entry-common.c:636 el0t_64_sync_handler+0x84/0xf0 arch/arm64/kernel/entry-common.c:654 el0t_64_sync+0x18c/0x190 Code: 97dafee4 340001b4 f9401328 2a1f03e0 (79402d14) ---[ end trace 0000000000000000 ]--- Above issue may happens as follows: ntfs_new_inode mi_init mi->mrec = kmalloc(sbi->record_size, GFP_NOFS); -->failed to allocate memory if (!mi->mrec) return -ENOMEM; iput iput_final evict ntfs_evict_inode ni_write_inode is_rec_inuse(ni->mi.mrec)-> As 'ni->mi.mrec' is NULL trigger NULL-ptr-deref To solve above issue if new inode failed make inode bad before call 'iput()' in 'ntfs_new_inode()'. | ||||
| CVE-2025-40362 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ceph: fix multifs mds auth caps issue The mds auth caps check should also validate the fsname along with the associated caps. Not doing so would result in applying the mds auth caps of one fs on to the other fs in a multifs ceph cluster. The bug causes multiple issues w.r.t user authentication, following is one such example. Steps to Reproduce (on vstart cluster): 1. Create two file systems in a cluster, say 'fsname1' and 'fsname2' 2. Authorize read only permission to the user 'client.usr' on fs 'fsname1' $ceph fs authorize fsname1 client.usr / r 3. Authorize read and write permission to the same user 'client.usr' on fs 'fsname2' $ceph fs authorize fsname2 client.usr / rw 4. Update the keyring $ceph auth get client.usr >> ./keyring With above permssions for the user 'client.usr', following is the expectation. a. The 'client.usr' should be able to only read the contents and not allowed to create or delete files on file system 'fsname1'. b. The 'client.usr' should be able to read/write on file system 'fsname2'. But, with this bug, the 'client.usr' is allowed to read/write on file system 'fsname1'. See below. 5. Mount the file system 'fsname1' with the user 'client.usr' $sudo bin/mount.ceph usr@.fsname1=/ /kmnt_fsname1_usr/ 6. Try creating a file on file system 'fsname1' with user 'client.usr'. This should fail but passes with this bug. $touch /kmnt_fsname1_usr/file1 7. Mount the file system 'fsname1' with the user 'client.admin' and create a file. $sudo bin/mount.ceph admin@.fsname1=/ /kmnt_fsname1_admin $echo "data" > /kmnt_fsname1_admin/admin_file1 8. Try removing an existing file on file system 'fsname1' with the user 'client.usr'. This shoudn't succeed but succeeds with the bug. $rm -f /kmnt_fsname1_usr/admin_file1 For more information, please take a look at the corresponding mds/fuse patch and tests added by looking into the tracker mentioned below. v2: Fix a possible null dereference in doutc v3: Don't store fsname from mdsmap, validate against ceph_mount_options's fsname and use it v4: Code refactor, better warning message and fix possible compiler warning [ Slava.Dubeyko: "fsname check failed" -> "fsname mismatch" ] | ||||
| CVE-2025-40360 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/sysfb: Do not dereference NULL pointer in plane reset The plane state in __drm_gem_reset_shadow_plane() can be NULL. Do not deref that pointer, but forward NULL to the other plane-reset helpers. Clears plane->state to NULL. v2: - fix typo in commit description (Javier) | ||||
| CVE-2025-40355 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: sysfs: check visibility before changing group attribute ownership Since commit 0c17270f9b92 ("net: sysfs: Implement is_visible for phys_(port_id, port_name, switch_id)"), __dev_change_net_namespace() can hit WARN_ON() when trying to change owner of a file that isn't visible. See the trace below: WARNING: CPU: 6 PID: 2938 at net/core/dev.c:12410 __dev_change_net_namespace+0xb89/0xc30 CPU: 6 UID: 0 PID: 2938 Comm: incusd Not tainted 6.17.1-1-mainline #1 PREEMPT(full) 4b783b4a638669fb644857f484487d17cb45ed1f Hardware name: Framework Laptop 13 (AMD Ryzen 7040Series)/FRANMDCP07, BIOS 03.07 02/19/2025 RIP: 0010:__dev_change_net_namespace+0xb89/0xc30 [...] Call Trace: <TASK> ? if6_seq_show+0x30/0x50 do_setlink.isra.0+0xc7/0x1270 ? __nla_validate_parse+0x5c/0xcc0 ? security_capable+0x94/0x1a0 rtnl_newlink+0x858/0xc20 ? update_curr+0x8e/0x1c0 ? update_entity_lag+0x71/0x80 ? sched_balance_newidle+0x358/0x450 ? psi_task_switch+0x113/0x2a0 ? __pfx_rtnl_newlink+0x10/0x10 rtnetlink_rcv_msg+0x346/0x3e0 ? sched_clock+0x10/0x30 ? __pfx_rtnetlink_rcv_msg+0x10/0x10 netlink_rcv_skb+0x59/0x110 netlink_unicast+0x285/0x3c0 ? __alloc_skb+0xdb/0x1a0 netlink_sendmsg+0x20d/0x430 ____sys_sendmsg+0x39f/0x3d0 ? import_iovec+0x2f/0x40 ___sys_sendmsg+0x99/0xe0 __sys_sendmsg+0x8a/0xf0 do_syscall_64+0x81/0x970 ? __sys_bind+0xe3/0x110 ? syscall_exit_work+0x143/0x1b0 ? do_syscall_64+0x244/0x970 ? sock_alloc_file+0x63/0xc0 ? syscall_exit_work+0x143/0x1b0 ? do_syscall_64+0x244/0x970 ? alloc_fd+0x12e/0x190 ? put_unused_fd+0x2a/0x70 ? do_sys_openat2+0xa2/0xe0 ? syscall_exit_work+0x143/0x1b0 ? do_syscall_64+0x244/0x970 ? exc_page_fault+0x7e/0x1a0 entry_SYSCALL_64_after_hwframe+0x76/0x7e [...] </TASK> Fix this by checking is_visible() before trying to touch the attribute. | ||||
| CVE-2025-40352 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: platform/mellanox: mlxbf-pmc: add sysfs_attr_init() to count_clock init The lock-related debug logic (CONFIG_LOCK_STAT) in the kernel is noting the following warning when the BlueField-3 SOC is booted: BUG: key ffff00008a3402a8 has not been registered! ------------[ cut here ]------------ DEBUG_LOCKS_WARN_ON(1) WARNING: CPU: 4 PID: 592 at kernel/locking/lockdep.c:4801 lockdep_init_map_type+0x1d4/0x2a0 <snip> Call trace: lockdep_init_map_type+0x1d4/0x2a0 __kernfs_create_file+0x84/0x140 sysfs_add_file_mode_ns+0xcc/0x1cc internal_create_group+0x110/0x3d4 internal_create_groups.part.0+0x54/0xcc sysfs_create_groups+0x24/0x40 device_add+0x6e8/0x93c device_register+0x28/0x40 __hwmon_device_register+0x4b0/0x8a0 devm_hwmon_device_register_with_groups+0x7c/0xe0 mlxbf_pmc_probe+0x1e8/0x3e0 [mlxbf_pmc] platform_probe+0x70/0x110 The mlxbf_pmc driver must call sysfs_attr_init() during the initialization of the "count_clock" data structure to avoid this warning. | ||||
| CVE-2025-40350 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: RX, Fix generating skb from non-linear xdp_buff for striding RQ XDP programs can change the layout of an xdp_buff through bpf_xdp_adjust_tail() and bpf_xdp_adjust_head(). Therefore, the driver cannot assume the size of the linear data area nor fragments. Fix the bug in mlx5 by generating skb according to xdp_buff after XDP programs run. Currently, when handling multi-buf XDP, the mlx5 driver assumes the layout of an xdp_buff to be unchanged. That is, the linear data area continues to be empty and fragments remain the same. This may cause the driver to generate erroneous skb or triggering a kernel warning. When an XDP program added linear data through bpf_xdp_adjust_head(), the linear data will be ignored as mlx5e_build_linear_skb() builds an skb without linear data and then pull data from fragments to fill the linear data area. When an XDP program has shrunk the non-linear data through bpf_xdp_adjust_tail(), the delta passed to __pskb_pull_tail() may exceed the actual nonlinear data size and trigger the BUG_ON in it. To fix the issue, first record the original number of fragments. If the number of fragments changes after the XDP program runs, rewind the end fragment pointer by the difference and recalculate the truesize. Then, build the skb with the linear data area matching the xdp_buff. Finally, only pull data in if there is non-linear data and fill the linear part up to 256 bytes. | ||||
| CVE-2025-40174 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: x86/mm: Fix SMP ordering in switch_mm_irqs_off() Stephen noted that it is possible to not have an smp_mb() between the loaded_mm store and the tlb_gen load in switch_mm(), meaning the ordering against flush_tlb_mm_range() goes out the window, and it becomes possible for switch_mm() to not observe a recent tlb_gen update and fail to flush the TLBs. [ dhansen: merge conflict fixed by Ingo ] | ||||
| CVE-2025-40346 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: arch_topology: Fix incorrect error check in topology_parse_cpu_capacity() Fix incorrect use of PTR_ERR_OR_ZERO() in topology_parse_cpu_capacity() which causes the code to proceed with NULL clock pointers. The current logic uses !PTR_ERR_OR_ZERO(cpu_clk) which evaluates to true for both valid pointers and NULL, leading to potential NULL pointer dereference in clk_get_rate(). Per include/linux/err.h documentation, PTR_ERR_OR_ZERO(ptr) returns: "The error code within @ptr if it is an error pointer; 0 otherwise." This means PTR_ERR_OR_ZERO() returns 0 for both valid pointers AND NULL pointers. Therefore !PTR_ERR_OR_ZERO(cpu_clk) evaluates to true (proceed) when cpu_clk is either valid or NULL, causing clk_get_rate(NULL) to be called when of_clk_get() returns NULL. Replace with !IS_ERR_OR_NULL(cpu_clk) which only proceeds for valid pointers, preventing potential NULL pointer dereference in clk_get_rate(). | ||||
| CVE-2025-40175 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: idpf: cleanup remaining SKBs in PTP flows When the driver requests Tx timestamp value, one of the first steps is to clone SKB using skb_get. It increases the reference counter for that SKB to prevent unexpected freeing by another component. However, there may be a case where the index is requested, SKB is assigned and never consumed by PTP flows - for example due to reset during running PTP apps. Add a check in release timestamping function to verify if the SKB assigned to Tx timestamp latch was freed, and release remaining SKBs. | ||||
| CVE-2025-40176 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: tls: wait for pending async decryptions if tls_strp_msg_hold fails Async decryption calls tls_strp_msg_hold to create a clone of the input skb to hold references to the memory it uses. If we fail to allocate that clone, proceeding with async decryption can lead to various issues (UAF on the skb, writing into userspace memory after the recv() call has returned). In this case, wait for all pending decryption requests. | ||||
| CVE-2025-40343 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: nvmet-fc: avoid scheduling association deletion twice When forcefully shutting down a port via the configfs interface, nvmet_port_subsys_drop_link() first calls nvmet_port_del_ctrls() and then nvmet_disable_port(). Both functions will eventually schedule all remaining associations for deletion. The current implementation checks whether an association is about to be removed, but only after the work item has already been scheduled. As a result, it is possible for the first scheduled work item to free all resources, and then for the same work item to be scheduled again for deletion. Because the association list is an RCU list, it is not possible to take a lock and remove the list entry directly, so it cannot be looked up again. Instead, a flag (terminating) must be used to determine whether the association is already in the process of being deleted. | ||||
| CVE-2025-40341 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: futex: Don't leak robust_list pointer on exec race sys_get_robust_list() and compat_get_robust_list() use ptrace_may_access() to check if the calling task is allowed to access another task's robust_list pointer. This check is racy against a concurrent exec() in the target process. During exec(), a task may transition from a non-privileged binary to a privileged one (e.g., setuid binary) and its credentials/memory mappings may change. If get_robust_list() performs ptrace_may_access() before this transition, it may erroneously allow access to sensitive information after the target becomes privileged. A racy access allows an attacker to exploit a window during which ptrace_may_access() passes before a target process transitions to a privileged state via exec(). For example, consider a non-privileged task T that is about to execute a setuid-root binary. An attacker task A calls get_robust_list(T) while T is still unprivileged. Since ptrace_may_access() checks permissions based on current credentials, it succeeds. However, if T begins exec immediately afterwards, it becomes privileged and may change its memory mappings. Because get_robust_list() proceeds to access T->robust_list without synchronizing with exec() it may read user-space pointers from a now-privileged process. This violates the intended post-exec access restrictions and could expose sensitive memory addresses or be used as a primitive in a larger exploit chain. Consequently, the race can lead to unauthorized disclosure of information across privilege boundaries and poses a potential security risk. Take a read lock on signal->exec_update_lock prior to invoking ptrace_may_access() and accessing the robust_list/compat_robust_list. This ensures that the target task's exec state remains stable during the check, allowing for consistent and synchronized validation of credentials. | ||||
| CVE-2023-54200 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: always release netdev hooks from notifier This reverts "netfilter: nf_tables: skip netdev events generated on netns removal". The problem is that when a veth device is released, the veth release callback will also queue the peer netns device for removal. Its possible that the peer netns is also slated for removal. In this case, the device memory is already released before the pre_exit hook of the peer netns runs: BUG: KASAN: slab-use-after-free in nf_hook_entry_head+0x1b8/0x1d0 Read of size 8 at addr ffff88812c0124f0 by task kworker/u8:1/45 Workqueue: netns cleanup_net Call Trace: nf_hook_entry_head+0x1b8/0x1d0 __nf_unregister_net_hook+0x76/0x510 nft_netdev_unregister_hooks+0xa0/0x220 __nft_release_hook+0x184/0x490 nf_tables_pre_exit_net+0x12f/0x1b0 .. Order is: 1. First netns is released, veth_dellink() queues peer netns device for removal 2. peer netns is queued for removal 3. peer netns device is released, unreg event is triggered 4. unreg event is ignored because netns is going down 5. pre_exit hook calls nft_netdev_unregister_hooks but device memory might be free'd already. | ||||
| CVE-2025-40179 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ext4: verify orphan file size is not too big In principle orphan file can be arbitrarily large. However orphan replay needs to traverse it all and we also pin all its buffers in memory. Thus filesystems with absurdly large orphan files can lead to big amounts of memory consumed. Limit orphan file size to a sane value and also use kvmalloc() for allocating array of block descriptor structures to avoid large order allocations for sane but large orphan files. | ||||
| CVE-2025-40336 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/gpusvm: fix hmm_pfn_to_map_order() usage Handle the case where the hmm range partially covers a huge page (like 2M), otherwise we can potentially end up doing something nasty like mapping memory which is outside the range, and maybe not even mapped by the mm. Fix is based on the xe userptr code, which in a future patch will directly use gpusvm, so needs alignment here. v2: - Add kernel-doc (Matt B) - s/fls/ilog2/ (Thomas) | ||||
| CVE-2025-40182 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: crypto: skcipher - Fix reqsize handling Commit afddce13ce81d ("crypto: api - Add reqsize to crypto_alg") introduced cra_reqsize field in crypto_alg struct to replace type specific reqsize fields. It looks like this was introduced specifically for ahash and acomp from the commit description as subsequent commits add necessary changes in these alg frameworks. However, this is being recommended for use in all crypto algs [1] instead of setting reqsize using crypto_*_set_reqsize(). Using cra_reqsize in skcipher algorithms, hence, causes memory corruptions and crashes as the underlying functions in the algorithm framework have not been updated to set the reqsize properly from cra_reqsize. [2] Add proper set_reqsize calls in the skcipher init function to properly initialize reqsize for these algorithms in the framework. [1]: https://lore.kernel.org/linux-crypto/aCL8BxpHr5OpT04k@gondor.apana.org.au/ [2]: https://gist.github.com/Pratham-T/24247446f1faf4b7843e4014d5089f6b | ||||