Export limit exceeded: 359507 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 19680 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (19680 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2023-54005 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: binder: fix memory leak in binder_init() In binder_init(), the destruction of binder_alloc_shrinker_init() is not performed in the wrong path, which will cause memory leaks. So this commit introduces binder_alloc_shrinker_exit() and calls it in the wrong path to fix that. | ||||
| CVE-2023-54003 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Fix GID entry ref leak when create_ah fails If AH create request fails, release sgid_attr to avoid GID entry referrence leak reported while releasing GID table | ||||
| CVE-2023-54001 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: staging: r8712: Fix memory leak in _r8712_init_xmit_priv() In the above mentioned routine, memory is allocated in several places. If the first succeeds and a later one fails, the routine will leak memory. This patch fixes commit 2865d42c78a9 ("staging: r8712u: Add the new driver to the mainline kernel"). A potential memory leak in r8712_xmit_resource_alloc() is also addressed. | ||||
| CVE-2023-53999 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: TC, Fix internal port memory leak The flow rule can be splited, and the extra post_act rules are added to post_act table. It's possible to trigger memleak when the rule forwards packets from internal port and over tunnel, in the case that, for example, CT 'new' state offload is allowed. As int_port object is assigned to the flow attribute of post_act rule, and its refcnt is incremented by mlx5e_tc_int_port_get(), but mlx5e_tc_int_port_put() is not called, the refcnt is never decremented, then int_port is never freed. The kmemleak reports the following error: unreferenced object 0xffff888128204b80 (size 64): comm "handler20", pid 50121, jiffies 4296973009 (age 642.932s) hex dump (first 32 bytes): 01 00 00 00 19 00 00 00 03 f0 00 00 04 00 00 00 ................ 98 77 67 41 81 88 ff ff 98 77 67 41 81 88 ff ff .wgA.....wgA.... backtrace: [<00000000e992680d>] kmalloc_trace+0x27/0x120 [<000000009e945a98>] mlx5e_tc_int_port_get+0x3f3/0xe20 [mlx5_core] [<0000000035a537f0>] mlx5e_tc_add_fdb_flow+0x473/0xcf0 [mlx5_core] [<0000000070c2cec6>] __mlx5e_add_fdb_flow+0x7cf/0xe90 [mlx5_core] [<000000005cc84048>] mlx5e_configure_flower+0xd40/0x4c40 [mlx5_core] [<000000004f8a2031>] mlx5e_rep_indr_offload.isra.0+0x10e/0x1c0 [mlx5_core] [<000000007df797dc>] mlx5e_rep_indr_setup_tc_cb+0x90/0x130 [mlx5_core] [<0000000016c15cc3>] tc_setup_cb_add+0x1cf/0x410 [<00000000a63305b4>] fl_hw_replace_filter+0x38f/0x670 [cls_flower] [<000000008bc9e77c>] fl_change+0x1fd5/0x4430 [cls_flower] [<00000000e7f766e4>] tc_new_tfilter+0x867/0x2010 [<00000000e101c0ef>] rtnetlink_rcv_msg+0x6fc/0x9f0 [<00000000e1111d44>] netlink_rcv_skb+0x12c/0x360 [<0000000082dd6c8b>] netlink_unicast+0x438/0x710 [<00000000fc568f70>] netlink_sendmsg+0x794/0xc50 [<0000000016e92590>] sock_sendmsg+0xc5/0x190 So fix this by moving int_port cleanup code to the flow attribute free helper, which is used by all the attribute free cases. | ||||
| CVE-2023-53992 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: ocb: don't leave if not joined If there's no OCB state, don't ask the driver/mac80211 to leave, since that's just confusing. Since set/clear the chandef state, that's a simple check. | ||||
| CVE-2023-53866 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: soc-compress: Reposition and add pcm_mutex If panic_on_warn is set and compress stream(DPCM) is started, then kernel panic occurred because card->pcm_mutex isn't held appropriately. In the following functions, warning were issued at this line "snd_soc_dpcm_mutex_assert_held". static int dpcm_be_connect(struct snd_soc_pcm_runtime *fe, struct snd_soc_pcm_runtime *be, int stream) { ... snd_soc_dpcm_mutex_assert_held(fe); ... } void dpcm_be_disconnect(struct snd_soc_pcm_runtime *fe, int stream) { ... snd_soc_dpcm_mutex_assert_held(fe); ... } void snd_soc_runtime_action(struct snd_soc_pcm_runtime *rtd, int stream, int action) { ... snd_soc_dpcm_mutex_assert_held(rtd); ... } int dpcm_dapm_stream_event(struct snd_soc_pcm_runtime *fe, int dir, int event) { ... snd_soc_dpcm_mutex_assert_held(fe); ... } These functions are called by soc_compr_set_params_fe, soc_compr_open_fe and soc_compr_free_fe without pcm_mutex locking. And this is call stack. [ 414.527841][ T2179] pc : dpcm_process_paths+0x5a4/0x750 [ 414.527848][ T2179] lr : dpcm_process_paths+0x37c/0x750 [ 414.527945][ T2179] Call trace: [ 414.527949][ T2179] dpcm_process_paths+0x5a4/0x750 [ 414.527955][ T2179] soc_compr_open_fe+0xb0/0x2cc [ 414.527972][ T2179] snd_compr_open+0x180/0x248 [ 414.527981][ T2179] snd_open+0x15c/0x194 [ 414.528003][ T2179] chrdev_open+0x1b0/0x220 [ 414.528023][ T2179] do_dentry_open+0x30c/0x594 [ 414.528045][ T2179] vfs_open+0x34/0x44 [ 414.528053][ T2179] path_openat+0x914/0xb08 [ 414.528062][ T2179] do_filp_open+0xc0/0x170 [ 414.528068][ T2179] do_sys_openat2+0x94/0x18c [ 414.528076][ T2179] __arm64_sys_openat+0x78/0xa4 [ 414.528084][ T2179] invoke_syscall+0x48/0x10c [ 414.528094][ T2179] el0_svc_common+0xbc/0x104 [ 414.528099][ T2179] do_el0_svc+0x34/0xd8 [ 414.528103][ T2179] el0_svc+0x34/0xc4 [ 414.528125][ T2179] el0t_64_sync_handler+0x8c/0xfc [ 414.528133][ T2179] el0t_64_sync+0x1a0/0x1a4 [ 414.528142][ T2179] Kernel panic - not syncing: panic_on_warn set ... So, I reposition and add pcm_mutex to resolve lockdep error. | ||||
| CVE-2023-53854 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: mediatek: mt8186: Fix use-after-free in driver remove path When devm runs function in the "remove" path for a device it runs them in the reverse order. That means that if you have parts of your driver that aren't using devm or are using "roll your own" devm w/ devm_add_action_or_reset() you need to keep that in mind. The mt8186 audio driver didn't quite get this right. Specifically, in mt8186_init_clock() it called mt8186_audsys_clk_register() and then went on to call a bunch of other devm function. The caller of mt8186_init_clock() used devm_add_action_or_reset() to call mt8186_deinit_clock() but, because of the intervening devm functions, the order was wrong. Specifically at probe time, the order was: 1. mt8186_audsys_clk_register() 2. afe_priv->clk = devm_kcalloc(...) 3. afe_priv->clk[i] = devm_clk_get(...) At remove time, the order (which should have been 3, 2, 1) was: 1. mt8186_audsys_clk_unregister() 3. Free all of afe_priv->clk[i] 2. Free afe_priv->clk The above seemed to be causing a use-after-free. Luckily, it's easy to fix this by simply using devm more correctly. Let's move the devm_add_action_or_reset() to the right place. In addition to fixing the use-after-free, code inspection shows that this fixes a leak (missing call to mt8186_audsys_clk_unregister()) that would have happened if any of the syscon_regmap_lookup_by_phandle() calls in mt8186_init_clock() had failed. | ||||
| CVE-2023-53850 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: iavf: use internal state to free traffic IRQs If the system tries to close the netdev while iavf_reset_task() is running, __LINK_STATE_START will be cleared and netif_running() will return false in iavf_reinit_interrupt_scheme(). This will result in iavf_free_traffic_irqs() not being called and a leak as follows: [7632.489326] remove_proc_entry: removing non-empty directory 'irq/999', leaking at least 'iavf-enp24s0f0v0-TxRx-0' [7632.490214] WARNING: CPU: 0 PID: 10 at fs/proc/generic.c:718 remove_proc_entry+0x19b/0x1b0 is shown when pci_disable_msix() is later called. Fix by using the internal adapter state. The traffic IRQs will always exist if state == __IAVF_RUNNING. | ||||
| CVE-2023-53848 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: md/raid5-cache: fix a deadlock in r5l_exit_log() Commit b13015af94cf ("md/raid5-cache: Clear conf->log after finishing work") introduce a new problem: // caller hold reconfig_mutex r5l_exit_log flush_work(&log->disable_writeback_work) r5c_disable_writeback_async wait_event /* * conf->log is not NULL, and mddev_trylock() * will fail, wait_event() can never pass. */ conf->log = NULL Fix this problem by setting 'config->log' to NULL before wake_up() as it used to be, so that wait_event() from r5c_disable_writeback_async() can exist. In the meantime, move forward md_unregister_thread() so that null-ptr-deref this commit fixed can still be fixed. | ||||
| CVE-2023-53845 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix infinite loop in nilfs_mdt_get_block() If the disk image that nilfs2 mounts is corrupted and a virtual block address obtained by block lookup for a metadata file is invalid, nilfs_bmap_lookup_at_level() may return the same internal return code as -ENOENT, meaning the block does not exist in the metadata file. This duplication of return codes confuses nilfs_mdt_get_block(), causing it to read and create a metadata block indefinitely. In particular, if this happens to the inode metadata file, ifile, semaphore i_rwsem can be left held, causing task hangs in lock_mount. Fix this issue by making nilfs_bmap_lookup_at_level() treat virtual block address translation failures with -ENOENT as metadata corruption instead of returning the error code. | ||||
| CVE-2023-53843 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: reject negative ifindex Recent changes in net-next (commit 759ab1edb56c ("net: store netdevs in an xarray")) refactored the handling of pre-assigned ifindexes and let syzbot surface a latent problem in ovs. ovs does not validate ifindex, making it possible to create netdev ports with negative ifindex values. It's easy to repro with YNL: $ ./cli.py --spec netlink/specs/ovs_datapath.yaml \ --do new \ --json '{"upcall-pid": 1, "name":"my-dp"}' $ ./cli.py --spec netlink/specs/ovs_vport.yaml \ --do new \ --json '{"upcall-pid": "00000001", "name": "some-port0", "dp-ifindex":3,"ifindex":4294901760,"type":2}' $ ip link show -65536: some-port0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 7a:48:21:ad:0b:fb brd ff:ff:ff:ff:ff:ff ... Validate the inputs. Now the second command correctly returns: $ ./cli.py --spec netlink/specs/ovs_vport.yaml \ --do new \ --json '{"upcall-pid": "00000001", "name": "some-port0", "dp-ifindex":3,"ifindex":4294901760,"type":2}' lib.ynl.NlError: Netlink error: Numerical result out of range nl_len = 108 (92) nl_flags = 0x300 nl_type = 2 error: -34 extack: {'msg': 'integer out of range', 'unknown': [[type:4 len:36] b'\x0c\x00\x02\x00\x00\x00\x00\x00\x00\x00\x00\x00\x0c\x00\x03\x00\xff\xff\xff\x7f\x00\x00\x00\x00\x08\x00\x01\x00\x08\x00\x00\x00'], 'bad-attr': '.ifindex'} Accept 0 since it used to be silently ignored. | ||||
| CVE-2023-53842 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: codecs: wcd-mbhc-v2: fix resource leaks on component remove The MBHC resources must be released on component probe failure and removal so can not be tied to the lifetime of the component device. This is specifically needed to allow probe deferrals of the sound card which otherwise fails when reprobing the codec component: snd-sc8280xp sound: ASoC: failed to instantiate card -517 genirq: Flags mismatch irq 299. 00002001 (mbhc sw intr) vs. 00002001 (mbhc sw intr) wcd938x_codec audio-codec: Failed to request mbhc interrupts -16 wcd938x_codec audio-codec: mbhc initialization failed wcd938x_codec audio-codec: ASoC: error at snd_soc_component_probe on audio-codec: -16 snd-sc8280xp sound: ASoC: failed to instantiate card -16 | ||||
| CVE-2023-53840 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: early: xhci-dbc: Fix a potential out-of-bound memory access If xdbc_bulk_write() fails, the values in 'buf' can be anything. So the string is not guaranteed to be NULL terminated when xdbc_trace() is called. Reserve an extra byte, which will be zeroed automatically because 'buf' is a static variable, in order to avoid troubles, should it happen. | ||||
| CVE-2023-53833 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/i915: Fix NULL ptr deref by checking new_crtc_state intel_atomic_get_new_crtc_state can return NULL, unless crtc state wasn't obtained previously with intel_atomic_get_crtc_state, so we must check it for NULLness here, just as in many other places, where we can't guarantee that intel_atomic_get_crtc_state was called. We are currently getting NULL ptr deref because of that, so this fix was confirmed to help. (cherry picked from commit 1d5b09f8daf859247a1ea65b0d732a24d88980d8) | ||||
| CVE-2023-53832 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: md/raid10: fix null-ptr-deref in raid10_sync_request init_resync() inits mempool and sets conf->have_replacemnt at the beginning of sync, close_sync() frees the mempool when sync is completed. After [1] recovery might be skipped and init_resync() is called but close_sync() is not. null-ptr-deref occurs with r10bio->dev[i].repl_bio. The following is one way to reproduce the issue. 1) create a array, wait for resync to complete, mddev->recovery_cp is set to MaxSector. 2) recovery is woken and it is skipped. conf->have_replacement is set to 0 in init_resync(). close_sync() not called. 3) some io errors and rdev A is set to WantReplacement. 4) a new device is added and set to A's replacement. 5) recovery is woken, A have replacement, but conf->have_replacemnt is 0. r10bio->dev[i].repl_bio will not be alloced and null-ptr-deref occurs. Fix it by not calling init_resync() if recovery skipped. [1] commit 7e83ccbecd60 ("md/raid10: Allow skipping recovery when clean arrays are assembled") | ||||
| CVE-2023-53824 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: netlink: annotate lockless accesses to nlk->max_recvmsg_len syzbot reported a data-race in data-race in netlink_recvmsg() [1] Indeed, netlink_recvmsg() can be run concurrently, and netlink_dump() also needs protection. [1] BUG: KCSAN: data-race in netlink_recvmsg / netlink_recvmsg read to 0xffff888141840b38 of 8 bytes by task 23057 on cpu 0: netlink_recvmsg+0xea/0x730 net/netlink/af_netlink.c:1988 sock_recvmsg_nosec net/socket.c:1017 [inline] sock_recvmsg net/socket.c:1038 [inline] __sys_recvfrom+0x1ee/0x2e0 net/socket.c:2194 __do_sys_recvfrom net/socket.c:2212 [inline] __se_sys_recvfrom net/socket.c:2208 [inline] __x64_sys_recvfrom+0x78/0x90 net/socket.c:2208 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd write to 0xffff888141840b38 of 8 bytes by task 23037 on cpu 1: netlink_recvmsg+0x114/0x730 net/netlink/af_netlink.c:1989 sock_recvmsg_nosec net/socket.c:1017 [inline] sock_recvmsg net/socket.c:1038 [inline] ____sys_recvmsg+0x156/0x310 net/socket.c:2720 ___sys_recvmsg net/socket.c:2762 [inline] do_recvmmsg+0x2e5/0x710 net/socket.c:2856 __sys_recvmmsg net/socket.c:2935 [inline] __do_sys_recvmmsg net/socket.c:2958 [inline] __se_sys_recvmmsg net/socket.c:2951 [inline] __x64_sys_recvmmsg+0xe2/0x160 net/socket.c:2951 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd value changed: 0x0000000000000000 -> 0x0000000000001000 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 23037 Comm: syz-executor.2 Not tainted 6.3.0-rc4-syzkaller-00195-g5a57b48fdfcb #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/02/2023 | ||||
| CVE-2023-53815 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: posix-timers: Prevent RT livelock in itimer_delete() itimer_delete() has a retry loop when the timer is concurrently expired. On non-RT kernels this just spin-waits until the timer callback has completed, except for posix CPU timers which have HAVE_POSIX_CPU_TIMERS_TASK_WORK enabled. In that case and on RT kernels the existing task could live lock when preempting the task which does the timer delivery. Replace spin_unlock() with an invocation of timer_wait_running() to handle it the same way as the other retry loops in the posix timer code. | ||||
| CVE-2023-53806 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: populate subvp cmd info only for the top pipe [Why] System restart observed while changing the display resolution to 8k with extended mode. Sytem restart was caused by a page fault. [How] When the driver populates subvp info it did it for both the pipes using vblank which caused an outof bounds array access causing the page fault. added checks to allow the top pipe only to fix this issue. | ||||
| CVE-2023-53800 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ubi: Fix use-after-free when volume resizing failed There is an use-after-free problem reported by KASAN: ================================================================== BUG: KASAN: use-after-free in ubi_eba_copy_table+0x11f/0x1c0 [ubi] Read of size 8 at addr ffff888101eec008 by task ubirsvol/4735 CPU: 2 PID: 4735 Comm: ubirsvol Not tainted 6.1.0-rc1-00003-g84fa3304a7fc-dirty #14 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x34/0x44 print_report+0x171/0x472 kasan_report+0xad/0x130 ubi_eba_copy_table+0x11f/0x1c0 [ubi] ubi_resize_volume+0x4f9/0xbc0 [ubi] ubi_cdev_ioctl+0x701/0x1850 [ubi] __x64_sys_ioctl+0x11d/0x170 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 </TASK> When ubi_change_vtbl_record() returns an error in ubi_resize_volume(), "new_eba_tbl" will be freed on error handing path, but it is holded by "vol->eba_tbl" in ubi_eba_replace_table(). It means that the liftcycle of "vol->eba_tbl" and "vol" are different, so when resizing volume in next time, it causing an use-after-free fault. Fix it by not freeing "new_eba_tbl" after it replaced in ubi_eba_replace_table(), while will be freed in next volume resizing. | ||||
| CVE-2023-53798 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ethtool: Fix uninitialized number of lanes It is not possible to set the number of lanes when setting link modes using the legacy IOCTL ethtool interface. Since 'struct ethtool_link_ksettings' is not initialized in this path, drivers receive an uninitialized number of lanes in 'struct ethtool_link_ksettings::lanes'. When this information is later queried from drivers, it results in the ethtool code making decisions based on uninitialized memory, leading to the following KMSAN splat [1]. In practice, this most likely only happens with the tun driver that simply returns whatever it got in the set operation. As far as I can tell, this uninitialized memory is not leaked to user space thanks to the 'ethtool_ops->cap_link_lanes_supported' check in linkmodes_prepare_data(). Fix by initializing the structure in the IOCTL path. Did not find any more call sites that pass an uninitialized structure when calling 'ethtool_ops::set_link_ksettings()'. [1] BUG: KMSAN: uninit-value in ethnl_update_linkmodes net/ethtool/linkmodes.c:273 [inline] BUG: KMSAN: uninit-value in ethnl_set_linkmodes+0x190b/0x19d0 net/ethtool/linkmodes.c:333 ethnl_update_linkmodes net/ethtool/linkmodes.c:273 [inline] ethnl_set_linkmodes+0x190b/0x19d0 net/ethtool/linkmodes.c:333 ethnl_default_set_doit+0x88d/0xde0 net/ethtool/netlink.c:640 genl_family_rcv_msg_doit net/netlink/genetlink.c:968 [inline] genl_family_rcv_msg net/netlink/genetlink.c:1048 [inline] genl_rcv_msg+0x141a/0x14c0 net/netlink/genetlink.c:1065 netlink_rcv_skb+0x3f8/0x750 net/netlink/af_netlink.c:2577 genl_rcv+0x40/0x60 net/netlink/genetlink.c:1076 netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline] netlink_unicast+0xf41/0x1270 net/netlink/af_netlink.c:1365 netlink_sendmsg+0x127d/0x1430 net/netlink/af_netlink.c:1942 sock_sendmsg_nosec net/socket.c:724 [inline] sock_sendmsg net/socket.c:747 [inline] ____sys_sendmsg+0xa24/0xe40 net/socket.c:2501 ___sys_sendmsg+0x2a1/0x3f0 net/socket.c:2555 __sys_sendmsg net/socket.c:2584 [inline] __do_sys_sendmsg net/socket.c:2593 [inline] __se_sys_sendmsg net/socket.c:2591 [inline] __x64_sys_sendmsg+0x36b/0x540 net/socket.c:2591 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Uninit was stored to memory at: tun_get_link_ksettings+0x37/0x60 drivers/net/tun.c:3544 __ethtool_get_link_ksettings+0x17b/0x260 net/ethtool/ioctl.c:441 ethnl_set_linkmodes+0xee/0x19d0 net/ethtool/linkmodes.c:327 ethnl_default_set_doit+0x88d/0xde0 net/ethtool/netlink.c:640 genl_family_rcv_msg_doit net/netlink/genetlink.c:968 [inline] genl_family_rcv_msg net/netlink/genetlink.c:1048 [inline] genl_rcv_msg+0x141a/0x14c0 net/netlink/genetlink.c:1065 netlink_rcv_skb+0x3f8/0x750 net/netlink/af_netlink.c:2577 genl_rcv+0x40/0x60 net/netlink/genetlink.c:1076 netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline] netlink_unicast+0xf41/0x1270 net/netlink/af_netlink.c:1365 netlink_sendmsg+0x127d/0x1430 net/netlink/af_netlink.c:1942 sock_sendmsg_nosec net/socket.c:724 [inline] sock_sendmsg net/socket.c:747 [inline] ____sys_sendmsg+0xa24/0xe40 net/socket.c:2501 ___sys_sendmsg+0x2a1/0x3f0 net/socket.c:2555 __sys_sendmsg net/socket.c:2584 [inline] __do_sys_sendmsg net/socket.c:2593 [inline] __se_sys_sendmsg net/socket.c:2591 [inline] __x64_sys_sendmsg+0x36b/0x540 net/socket.c:2591 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Uninit was stored to memory at: tun_set_link_ksettings+0x37/0x60 drivers/net/tun.c:3553 ethtool_set_link_ksettings+0x600/0x690 net/ethtool/ioctl.c:609 __dev_ethtool net/ethtool/ioctl.c:3024 [inline] dev_ethtool+0x1db9/0x2a70 net/ethtool/ioctl.c:3078 dev_ioctl+0xb07/0x1270 net/core/dev_ioctl.c:524 sock_do_ioctl+0x295/0x540 net/socket.c:1213 sock_i ---truncated--- | ||||