Export limit exceeded: 19180 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (19180 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-45888 | 1 Linux | 1 Linux Kernel | 2026-05-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: md/raid1: fix memory leak in raid1_run() raid1_run() calls setup_conf() which registers a thread via md_register_thread(). If raid1_set_limits() fails, the previously registered thread is not unregistered, resulting in a memory leak of the md_thread structure and the thread resource itself. Add md_unregister_thread() to the error path to properly cleanup the thread, which aligns with the error handling logic of other paths in this function. Compile tested only. Issue found using a prototype static analysis tool and code review. | ||||
| CVE-2026-45915 | 1 Linux | 1 Linux Kernel | 2026-05-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fat: avoid parent link count underflow in rmdir Corrupted FAT images can leave a directory inode with an incorrect i_nlink (e.g. 2 even though subdirectories exist). rmdir then unconditionally calls drop_nlink(dir) and can drive i_nlink to 0, triggering the WARN_ON in drop_nlink(). Add a sanity check in vfat_rmdir() and msdos_rmdir(): only drop the parent link count when it is at least 3, otherwise report a filesystem error. | ||||
| CVE-2026-45918 | 1 Linux | 1 Linux Kernel | 2026-05-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ovpn: tcp - don't deref NULL sk_socket member after tcp_close() When deleting a peer in case of keepalive expiration, the peer is removed from the OpenVPN hashtable and is temporary inserted in a "release list" for further processing. This happens in: ovpn_peer_keepalive_work() unlock_ovpn(release_list) This processing includes detaching from the socket being used to talk to this peer, by restoring its original proto and socket ops/callbacks. In case of TCP it may happen that, while the peer is sitting in the release list, userspace decides to close the socket. This will result in a concurrent execution of: tcp_close(sk) __tcp_close(sk) sock_orphan(sk) sk_set_socket(sk, NULL) The last function call will set sk->sk_socket to NULL. When the releasing routine is resumed, ovpn_tcp_socket_detach() will attempt to dereference sk->sk_socket to restore its original ops member. This operation will crash due to sk->sk_socket being NULL. Fix this race condition by testing-and-accessing sk->sk_socket atomically under sk->sk_callback_lock. | ||||
| CVE-2026-45908 | 1 Linux | 1 Linux Kernel | 2026-05-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Fix memory leak in amdxdna_ubuf_map The amdxdna_ubuf_map() function allocates memory for sg and internal sg table structures, but it fails to free them if subsequent operations (sg_alloc_table_from_pages or dma_map_sgtable) fail. | ||||
| CVE-2026-45877 | 1 Linux | 1 Linux Kernel | 2026-05-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: HID: intel-ish-hid: fix NULL-ptr-deref in ishtp_bus_remove_all_clients During a warm reset flow, the cl->device pointer may be NULL if the reset occurs while clients are still being enumerated. Accessing cl->device->reference_count without a NULL check leads to a kernel panic. This issue was identified during multi-unit warm reboot stress clycles. Add a defensive NULL check for cl->device to ensure stability under such intensive testing conditions. KASAN: null-ptr-deref in range [0000000000000000-0000000000000007] Workqueue: ish_fw_update_wq fw_reset_work_fn Call Trace: ishtp_bus_remove_all_clients+0xbe/0x130 [intel_ishtp] ishtp_reset_handler+0x85/0x1a0 [intel_ishtp] fw_reset_work_fn+0x8a/0xc0 [intel_ish_ipc] | ||||
| CVE-2026-46086 | 1 Linux | 1 Linux Kernel | 2026-05-27 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net: bridge: use a stable FDB dst snapshot in RCU readers Local FDB entries can be rewritten in place by `fdb_delete_local()`, which updates `f->dst` to another port or to `NULL` while keeping the entry alive. Several bridge RCU readers inspect `f->dst`, including `br_fdb_fillbuf()` through the `brforward_read()` sysfs path. These readers currently load `f->dst` multiple times and can therefore observe inconsistent values across the check and later dereference. In `br_fdb_fillbuf()`, this means a concurrent local-FDB update can change `f->dst` after the NULL check and before the `port_no` dereference, leading to a NULL-ptr-deref. Fix this by taking a single `READ_ONCE()` snapshot of `f->dst` in each affected RCU reader and using that snapshot for the rest of the access sequence. Also publish the in-place `f->dst` updates in `fdb_delete_local()` with `WRITE_ONCE()` so the readers and writer use matching access patterns. | ||||
| CVE-2026-46092 | 1 Linux | 1 Linux Kernel | 2026-05-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: check for PCI upstream bridge existence pci_upstream_bridge() returns NULL if the device is on a root bus. If 8821CE is installed in the system with such a PCI topology, the probing routine will crash. This has probably been unnoticed as 8821CE is mostly supplied in laptops where there is a PCI-to-PCI bridge located upstream from the device. However the card might be installed on a system with different configuration. Check if the bridge does exist for the specific workaround to be applied. Found by Linux Verification Center (linuxtesting.org) with Svace static analysis tool. | ||||
| CVE-2026-46096 | 1 Linux | 1 Linux Kernel | 2026-05-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tpm2-sessions: Fix missing tpm_buf_destroy() in tpm2_read_public() tpm2_read_public() calls tpm_buf_init() but fails to call tpm_buf_destroy() on two exit paths, leaking a page allocation: 1. When name_size() returns an error (unrecognized hash algorithm), the function returns directly without destroying the buffer. 2. On the success path, the buffer is never destroyed before returning. All other error paths in the function correctly call tpm_buf_destroy() before returning. Fix both by adding the missing tpm_buf_destroy() calls. | ||||
| CVE-2026-46097 | 1 Linux | 1 Linux Kernel | 2026-05-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Input: edt-ft5x06 - fix use-after-free in debugfs teardown The commit 68743c500c6e ("Input: edt-ft5x06 - use per-client debugfs directory") removed the manual debugfs teardown, relying on the I2C core to handle it. However, this creates a window where debugfs files are still accessible after edt_ft5x06_ts_teardown_debugfs() frees tsdata->raw_buffer. To prevent a use-after-free, protect the freeing of raw_buffer with the device mutex and set raw_buffer to NULL. The debugfs read function already checks if raw_buffer is NULL under the same mutex, so this safely avoids the use-after-free. | ||||
| CVE-2026-45889 | 1 Linux | 1 Linux Kernel | 2026-05-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: do not account for OoO in mptcp_rcvbuf_grow() MPTCP-level OoOs are physiological when multiple subflows are active concurrently and will not cause retransmissions nor are caused by drops. Accounting for them in mptcp_rcvbuf_grow() causes the rcvbuf slowly drifting towards tcp_rmem[2]. Remove such accounting. Note that subflows will still account for TCP-level OoO when the MPTCP-level rcvbuf is propagated. This also closes a subtle and very unlikely race condition with rcvspace init; active sockets with user-space holding the msk-level socket lock, could complete such initialization in the receive callback, after that the first OoO data reaches the rcvbuf and potentially triggering a divide by zero Oops. | ||||
| CVE-2026-45883 | 1 Linux | 1 Linux Kernel | 2026-05-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: sca3000: Fix a resource leak in sca3000_probe() spi->irq from request_threaded_irq() not released when iio_device_register() fails. Add an return value check and jump to a common error handler when iio_device_register() fails. | ||||
| CVE-2026-8855 | 3 Ibm, Linux, Microsoft | 5 Aix, Http Server, Z\/os and 2 more | 2026-05-27 | 8.1 High |
| IBM HTTP Server 8.5, and 9.0 is vulnerable to remote code execution and denial of service in configurations with TLS mutual authentication (client authentication). | ||||
| CVE-2026-45995 | 1 Linux | 1 Linux Kernel | 2026-05-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: io_uring/zcrx: fix user_struct uaf io_free_rbuf_ring() usees a struct user_struct, which io_zcrx_ifq_free() puts it down before destroying the ring. | ||||
| CVE-2026-45868 | 1 Linux | 1 Linux Kernel | 2026-05-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: pinctrl: single: fix refcount leak in pcs_add_gpio_func() of_parse_phandle_with_args() returns a device_node pointer with refcount incremented in gpiospec.np. The loop iterates through all phandles but never releases the reference, causing a refcount leak on each iteration. Add of_node_put() calls to release the reference after extracting the needed arguments and on the error path when devm_kzalloc() fails. This bug was detected by our static analysis tool and verified by my code review. | ||||
| CVE-2026-45857 | 1 Linux | 1 Linux Kernel | 2026-05-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: csiostor: Fix dereference of null pointer rn The error exit path when rn is NULL ends up deferencing the null pointer rn via the use of the macro CSIO_INC_STATS. Fix this by adding a new error return path label after the use of the macro to avoid the deference. | ||||
| CVE-2026-45874 | 1 Linux | 1 Linux Kernel | 2026-05-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: phy: freescale: imx8qm-hsio: fix NULL pointer dereference During the probe the refclk_pad pointer is set to NULL if the 'fsl,refclk-pad-mode' property is not defined in the devicetree node. But in imx_hsio_configure_clk_pad() this pointer is unconditionally used which could result in a NULL pointer dereference. So check the pointer before to use it. | ||||
| CVE-2026-45848 | 1 Linux | 1 Linux Kernel | 2026-05-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: apparmor: fix NULL sock in aa_sock_file_perm Deal with the potential that sock and sock-sk can be NULL during socket setup or teardown. This could lead to an oops. The fix for NULL pointer dereference in __unix_needs_revalidation shows this is at least possible for af_unix sockets. While the fix for af_unix sockets applies for newer mediation this is still the fall back path for older af_unix mediation and other sockets, so ensure it is covered. | ||||
| CVE-2025-71303 | 1 Linux | 1 Linux Kernel | 2026-05-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Fix race condition when checking rpm_on When autosuspend is triggered, driver rpm_on flag is set to indicate that a suspend/resume is already in progress. However, when a userspace application submits a command during this narrow window, amdxdna_pm_resume_get() may incorrectly skip the resume operation because the rpm_on flag is still set. This results in commands being submitted while the device has not actually resumed, causing unexpected behavior. The set_dpm() is called by suspend/resume, it relied on rpm_on flag to avoid calling into rpm suspend/resume recursivly. So to fix this, remove the use of the rpm_on flag entirely. Instead, introduce aie2_pm_set_dpm() which explicitly resumes the device before invoking set_dpm(). With this change, set_dpm() is called directly inside the suspend or resume execution path. Otherwise, aie2_pm_set_dpm() is called. | ||||
| CVE-2025-71308 | 1 Linux | 1 Linux Kernel | 2026-05-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Fix potential NULL pointer dereference in context cleanup aie_destroy_context() is invoked during error handling in aie2_create_context(). However, aie_destroy_context() assumes that the context's mailbox channel pointer is non-NULL. If mailbox channel creation fails, the pointer remains NULL and calling aie_destroy_context() can lead to a NULL pointer dereference. In aie2_create_context(), replace aie_destroy_context() with a function which request firmware to remove the context created previously. | ||||
| CVE-2025-71309 | 1 Linux | 1 Linux Kernel | 2026-05-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: fix deadlock in ni_read_folio_cmpr Syzbot reported a task hung in ni_readpage_cmpr (now ni_read_folio_cmpr). This is caused by a lock inversion deadlock involving the inode mutex (ni_lock) and page locks. Scenario: 1. Task A enters ntfs_read_folio() for page X. It acquires ni_lock. 2. Task A calls ni_read_folio_cmpr(), which attempts to lock all pages in the compressed frame (including page Y). 3. Concurrently, Task B (e.g., via readahead) has locked page Y and calls ntfs_read_folio(). 4. Task B waits for ni_lock (held by A). 5. Task A waits for page Y lock (held by B). -> DEADLOCK. The fix is to restructure locking: do not take ni_lock in ntfs_read_folio(). Instead, acquire ni_lock inside ni_read_folio_cmpr() ONLY AFTER all required page locks for the frame have been successfully acquired. This restores the correct lock ordering (Page Lock -> ni_lock) consistent with VFS. [almaz.alexandrovich@paragon-software.com: ni_readpage_cmpr was renamed to ni_read_folio_cmpr] | ||||