Export limit exceeded: 22943 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (22943 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-61667 | 2 Datadoghq, Linux | 2 Agent, Linux | 2026-04-15 | 7.3 High |
| The Datadog Agent collects events and metrics from hosts and sends them to Datadog. A vulnerability within the Datadog Linux Host Agent versions 7.65.0 through 7.70.2 exists due to insufficient permissions being set on the `opt/datadog-agent/python-scripts/__pycache__` directory during installation. Code in this directory is only run by the Agent during Agent install/upgrades. This could allow an attacker with local access to modify files in this directory, which would then subsequently be run when the Agent is upgraded, resulting in local privilege escalation. This issue requires local access to the host and a valid low privilege account to be vulnerable. Note that this vulnerability only impacts the Linux Host Agent. Other variations of the Agent including the container, kubernetes, windows host and other agents are not impacted. Version 7.71.0 contains a patch for the issue. | ||||
| CVE-2025-40138 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid NULL pointer dereference in f2fs_check_quota_consistency() syzbot reported a f2fs bug as below: Oops: gen[ 107.736417][ T5848] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 1 UID: 0 PID: 5848 Comm: syz-executor263 Tainted: G W 6.17.0-rc1-syzkaller-00014-g0e39a731820a #0 PREEMPT_{RT,(full)} RIP: 0010:strcmp+0x3c/0xc0 lib/string.c:284 Call Trace: <TASK> f2fs_check_quota_consistency fs/f2fs/super.c:1188 [inline] f2fs_check_opt_consistency+0x1378/0x2c10 fs/f2fs/super.c:1436 __f2fs_remount fs/f2fs/super.c:2653 [inline] f2fs_reconfigure+0x482/0x1770 fs/f2fs/super.c:5297 reconfigure_super+0x224/0x890 fs/super.c:1077 do_remount fs/namespace.c:3314 [inline] path_mount+0xd18/0xfe0 fs/namespace.c:4112 do_mount fs/namespace.c:4133 [inline] __do_sys_mount fs/namespace.c:4344 [inline] __se_sys_mount+0x317/0x410 fs/namespace.c:4321 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f The direct reason is f2fs_check_quota_consistency() may suffer null-ptr-deref issue in strcmp(). The bug can be reproduced w/ below scripts: mkfs.f2fs -f /dev/vdb mount -t f2fs -o usrquota /dev/vdb /mnt/f2fs quotacheck -uc /mnt/f2fs/ umount /mnt/f2fs mount -t f2fs -o usrjquota=aquota.user,jqfmt=vfsold /dev/vdb /mnt/f2fs mount -t f2fs -o remount,usrjquota=,jqfmt=vfsold /dev/vdb /mnt/f2fs umount /mnt/f2fs So, before old_qname and new_qname comparison, we need to check whether they are all valid pointers, fix it. | ||||
| CVE-2025-40134 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: dm: fix NULL pointer dereference in __dm_suspend() There is a race condition between dm device suspend and table load that can lead to null pointer dereference. The issue occurs when suspend is invoked before table load completes: BUG: kernel NULL pointer dereference, address: 0000000000000054 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 6 PID: 6798 Comm: dmsetup Not tainted 6.6.0-g7e52f5f0ca9b #62 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.1-2.fc37 04/01/2014 RIP: 0010:blk_mq_wait_quiesce_done+0x0/0x50 Call Trace: <TASK> blk_mq_quiesce_queue+0x2c/0x50 dm_stop_queue+0xd/0x20 __dm_suspend+0x130/0x330 dm_suspend+0x11a/0x180 dev_suspend+0x27e/0x560 ctl_ioctl+0x4cf/0x850 dm_ctl_ioctl+0xd/0x20 vfs_ioctl+0x1d/0x50 __se_sys_ioctl+0x9b/0xc0 __x64_sys_ioctl+0x19/0x30 x64_sys_call+0x2c4a/0x4620 do_syscall_64+0x9e/0x1b0 The issue can be triggered as below: T1 T2 dm_suspend table_load __dm_suspend dm_setup_md_queue dm_mq_init_request_queue blk_mq_init_allocated_queue => q->mq_ops = set->ops; (1) dm_stop_queue / dm_wait_for_completion => q->tag_set NULL pointer! (2) => q->tag_set = set; (3) Fix this by checking if a valid table (map) exists before performing request-based suspend and waiting for target I/O. When map is NULL, skip these table-dependent suspend steps. Even when map is NULL, no I/O can reach any target because there is no table loaded; I/O submitted in this state will fail early in the DM layer. Skipping the table-dependent suspend logic in this case is safe and avoids NULL pointer dereferences. | ||||
| CVE-2025-40137 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to truncate first page in error path of f2fs_truncate() syzbot reports a bug as below: loop0: detected capacity change from 0 to 40427 F2FS-fs (loop0): Wrong SSA boundary, start(3584) end(4096) blocks(3072) F2FS-fs (loop0): Can't find valid F2FS filesystem in 1th superblock F2FS-fs (loop0): invalid crc value F2FS-fs (loop0): f2fs_convert_inline_folio: corrupted inline inode ino=3, i_addr[0]:0x1601, run fsck to fix. ------------[ cut here ]------------ kernel BUG at fs/inode.c:753! RIP: 0010:clear_inode+0x169/0x190 fs/inode.c:753 Call Trace: <TASK> evict+0x504/0x9c0 fs/inode.c:810 f2fs_fill_super+0x5612/0x6fa0 fs/f2fs/super.c:5047 get_tree_bdev_flags+0x40e/0x4d0 fs/super.c:1692 vfs_get_tree+0x8f/0x2b0 fs/super.c:1815 do_new_mount+0x2a2/0x9e0 fs/namespace.c:3808 do_mount fs/namespace.c:4136 [inline] __do_sys_mount fs/namespace.c:4347 [inline] __se_sys_mount+0x317/0x410 fs/namespace.c:4324 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f During f2fs_evict_inode(), clear_inode() detects that we missed to truncate all page cache before destorying inode, that is because in below path, we will create page #0 in cache, but missed to drop it in error path, let's fix it. - evict - f2fs_evict_inode - f2fs_truncate - f2fs_convert_inline_inode - f2fs_grab_cache_folio : create page #0 in cache - f2fs_convert_inline_folio : sanity check failed, return -EFSCORRUPTED - clear_inode detects that inode->i_data.nrpages is not zero | ||||
| CVE-2025-13524 | 4 Amazon, Apple, Linux and 1 more | 4 Aws Wickr, Macos, Linux and 1 more | 2026-04-15 | 5.7 Medium |
| Improper resource release in the call termination process in AWS Wickr before version 6.62.13 on Windows, macOS and Linux may allow a call participant to continue receiving audio input from another user after they close their call window. This issue occurs under certain conditions, which require the affected user to take a particular action within the application To mitigate this issue, users should upgrade AWS Wickr, Wickr Gov and Wickr Enterprise desktop version to version 6.62.13. | ||||
| CVE-2023-54172 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: x86/hyperv: Disable IBT when hypercall page lacks ENDBR instruction On hardware that supports Indirect Branch Tracking (IBT), Hyper-V VMs with ConfigVersion 9.3 or later support IBT in the guest. However, current versions of Hyper-V have a bug in that there's not an ENDBR64 instruction at the beginning of the hypercall page. Since hypercalls are made with an indirect call to the hypercall page, all hypercall attempts fail with an exception and Linux panics. A Hyper-V fix is in progress to add ENDBR64. But guard against the Linux panic by clearing X86_FEATURE_IBT if the hypercall page doesn't start with ENDBR. The VM will boot and run without IBT. If future Linux 32-bit kernels were to support IBT, additional hypercall page hackery would be needed to make IBT work for such kernels in a Hyper-V VM. | ||||
| CVE-2023-54176 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: stricter state check in mptcp_worker As reported by Christoph, the mptcp protocol can run the worker when the relevant msk socket is in an unexpected state: connect() // incoming reset + fastclose // the mptcp worker is scheduled mptcp_disconnect() // msk is now CLOSED listen() mptcp_worker() Leading to the following splat: divide error: 0000 [#1] PREEMPT SMP CPU: 1 PID: 21 Comm: kworker/1:0 Not tainted 6.3.0-rc1-gde5e8fd0123c #11 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014 Workqueue: events mptcp_worker RIP: 0010:__tcp_select_window+0x22c/0x4b0 net/ipv4/tcp_output.c:3018 RSP: 0018:ffffc900000b3c98 EFLAGS: 00010293 RAX: 000000000000ffd7 RBX: 000000000000ffd7 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff8214ce97 RDI: 0000000000000004 RBP: 000000000000ffd7 R08: 0000000000000004 R09: 0000000000010000 R10: 000000000000ffd7 R11: ffff888005afa148 R12: 000000000000ffd7 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88803ed00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000405270 CR3: 000000003011e006 CR4: 0000000000370ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> tcp_select_window net/ipv4/tcp_output.c:262 [inline] __tcp_transmit_skb+0x356/0x1280 net/ipv4/tcp_output.c:1345 tcp_transmit_skb net/ipv4/tcp_output.c:1417 [inline] tcp_send_active_reset+0x13e/0x320 net/ipv4/tcp_output.c:3459 mptcp_check_fastclose net/mptcp/protocol.c:2530 [inline] mptcp_worker+0x6c7/0x800 net/mptcp/protocol.c:2705 process_one_work+0x3bd/0x950 kernel/workqueue.c:2390 worker_thread+0x5b/0x610 kernel/workqueue.c:2537 kthread+0x138/0x170 kernel/kthread.c:376 ret_from_fork+0x2c/0x50 arch/x86/entry/entry_64.S:308 </TASK> This change addresses the issue explicitly checking for bad states before running the mptcp worker. | ||||
| CVE-2023-54231 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: libwx: fix memory leak in wx_setup_rx_resources When wx_alloc_page_pool() failed in wx_setup_rx_resources(), it doesn't release DMA buffer. Add dma_free_coherent() in the error path to release the DMA buffer. | ||||
| CVE-2023-54199 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/msm/adreno: Fix null ptr access in adreno_gpu_cleanup() Fix the below kernel panic due to null pointer access: [ 18.504431] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000048 [ 18.513464] Mem abort info: [ 18.516346] ESR = 0x0000000096000005 [ 18.520204] EC = 0x25: DABT (current EL), IL = 32 bits [ 18.525706] SET = 0, FnV = 0 [ 18.528878] EA = 0, S1PTW = 0 [ 18.532117] FSC = 0x05: level 1 translation fault [ 18.537138] Data abort info: [ 18.540110] ISV = 0, ISS = 0x00000005 [ 18.544060] CM = 0, WnR = 0 [ 18.547109] user pgtable: 4k pages, 39-bit VAs, pgdp=0000000112826000 [ 18.553738] [0000000000000048] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [ 18.562690] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP **Snip** [ 18.696758] Call trace: [ 18.699278] adreno_gpu_cleanup+0x30/0x88 [ 18.703396] a6xx_destroy+0xc0/0x130 [ 18.707066] a6xx_gpu_init+0x308/0x424 [ 18.710921] adreno_bind+0x178/0x288 [ 18.714590] component_bind_all+0xe0/0x214 [ 18.718797] msm_drm_bind+0x1d4/0x614 [ 18.722566] try_to_bring_up_aggregate_device+0x16c/0x1b8 [ 18.728105] __component_add+0xa0/0x158 [ 18.732048] component_add+0x20/0x2c [ 18.735719] adreno_probe+0x40/0xc0 [ 18.739300] platform_probe+0xb4/0xd4 [ 18.743068] really_probe+0xfc/0x284 [ 18.746738] __driver_probe_device+0xc0/0xec [ 18.751129] driver_probe_device+0x48/0x110 [ 18.755421] __device_attach_driver+0xa8/0xd0 [ 18.759900] bus_for_each_drv+0x90/0xdc [ 18.763843] __device_attach+0xfc/0x174 [ 18.767786] device_initial_probe+0x20/0x2c [ 18.772090] bus_probe_device+0x40/0xa0 [ 18.776032] deferred_probe_work_func+0x94/0xd0 [ 18.780686] process_one_work+0x190/0x3d0 [ 18.784805] worker_thread+0x280/0x3d4 [ 18.788659] kthread+0x104/0x1c0 [ 18.791981] ret_from_fork+0x10/0x20 [ 18.795654] Code: f9400408 aa0003f3 aa1f03f4 91142015 (f9402516) [ 18.801913] ---[ end trace 0000000000000000 ]--- [ 18.809039] Kernel panic - not syncing: Oops: Fatal exception Patchwork: https://patchwork.freedesktop.org/patch/515605/ | ||||
| CVE-2023-54236 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net/net_failover: fix txq exceeding warning The failover txq is inited as 16 queues. when a packet is transmitted from the failover device firstly, the failover device will select the queue which is returned from the primary device if the primary device is UP and running. If the primary device txq is bigger than the default 16, it can lead to the following warning: eth0 selects TX queue 18, but real number of TX queues is 16 The warning backtrace is: [ 32.146376] CPU: 18 PID: 9134 Comm: chronyd Tainted: G E 6.2.8-1.el7.centos.x86_64 #1 [ 32.147175] Hardware name: Red Hat KVM, BIOS 1.10.2-3.el7_4.1 04/01/2014 [ 32.147730] Call Trace: [ 32.147971] <TASK> [ 32.148183] dump_stack_lvl+0x48/0x70 [ 32.148514] dump_stack+0x10/0x20 [ 32.148820] netdev_core_pick_tx+0xb1/0xe0 [ 32.149180] __dev_queue_xmit+0x529/0xcf0 [ 32.149533] ? __check_object_size.part.0+0x21c/0x2c0 [ 32.149967] ip_finish_output2+0x278/0x560 [ 32.150327] __ip_finish_output+0x1fe/0x2f0 [ 32.150690] ip_finish_output+0x2a/0xd0 [ 32.151032] ip_output+0x7a/0x110 [ 32.151337] ? __pfx_ip_finish_output+0x10/0x10 [ 32.151733] ip_local_out+0x5e/0x70 [ 32.152054] ip_send_skb+0x19/0x50 [ 32.152366] udp_send_skb.isra.0+0x163/0x3a0 [ 32.152736] udp_sendmsg+0xba8/0xec0 [ 32.153060] ? __folio_memcg_unlock+0x25/0x60 [ 32.153445] ? __pfx_ip_generic_getfrag+0x10/0x10 [ 32.153854] ? sock_has_perm+0x85/0xa0 [ 32.154190] inet_sendmsg+0x6d/0x80 [ 32.154508] ? inet_sendmsg+0x6d/0x80 [ 32.154838] sock_sendmsg+0x62/0x70 [ 32.155152] ____sys_sendmsg+0x134/0x290 [ 32.155499] ___sys_sendmsg+0x81/0xc0 [ 32.155828] ? _get_random_bytes.part.0+0x79/0x1a0 [ 32.156240] ? ip4_datagram_release_cb+0x5f/0x1e0 [ 32.156649] ? get_random_u16+0x69/0xf0 [ 32.156989] ? __fget_light+0xcf/0x110 [ 32.157326] __sys_sendmmsg+0xc4/0x210 [ 32.157657] ? __sys_connect+0xb7/0xe0 [ 32.157995] ? __audit_syscall_entry+0xce/0x140 [ 32.158388] ? syscall_trace_enter.isra.0+0x12c/0x1a0 [ 32.158820] __x64_sys_sendmmsg+0x24/0x30 [ 32.159171] do_syscall_64+0x38/0x90 [ 32.159493] entry_SYSCALL_64_after_hwframe+0x72/0xdc Fix that by reducing txq number as the non-existent primary-dev does. | ||||
| CVE-2023-54239 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: iommufd: Check for uptr overflow syzkaller found that setting up a map with a user VA that wraps past zero can trigger WARN_ONs, particularly from pin_user_pages weirdly returning 0 due to invalid arguments. Prevent creating a pages with a uptr and size that would math overflow. WARNING: CPU: 0 PID: 518 at drivers/iommu/iommufd/pages.c:793 pfn_reader_user_pin+0x2e6/0x390 Modules linked in: CPU: 0 PID: 518 Comm: repro Not tainted 6.3.0-rc2-eeac8ede1755+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:pfn_reader_user_pin+0x2e6/0x390 Code: b1 11 e9 25 fe ff ff e8 28 e4 0f ff 31 ff 48 89 de e8 2e e6 0f ff 48 85 db 74 0a e8 14 e4 0f ff e9 4d ff ff ff e8 0a e4 0f ff <0f> 0b bb f2 ff ff ff e9 3c ff ff ff e8 f9 e3 0f ff ba 01 00 00 00 RSP: 0018:ffffc90000f9fa30 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff821e2b72 RDX: 0000000000000000 RSI: ffff888014184680 RDI: 0000000000000002 RBP: ffffc90000f9fa78 R08: 00000000000000ff R09: 0000000079de6f4e R10: ffffc90000f9f790 R11: ffff888014185418 R12: ffffc90000f9fc60 R13: 0000000000000002 R14: ffff888007879800 R15: 0000000000000000 FS: 00007f4227555740(0000) GS:ffff88807dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000043 CR3: 000000000e748005 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: <TASK> pfn_reader_next+0x14a/0x7b0 ? interval_tree_double_span_iter_update+0x11a/0x140 pfn_reader_first+0x140/0x1b0 iopt_pages_rw_slow+0x71/0x280 ? __this_cpu_preempt_check+0x20/0x30 iopt_pages_rw_access+0x2b2/0x5b0 iommufd_access_rw+0x19f/0x2f0 iommufd_test+0xd11/0x16f0 ? write_comp_data+0x2f/0x90 iommufd_fops_ioctl+0x206/0x330 __x64_sys_ioctl+0x10e/0x160 ? __pfx_iommufd_fops_ioctl+0x10/0x10 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc | ||||
| CVE-2023-54267 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: powerpc/pseries: Rework lppaca_shared_proc() to avoid DEBUG_PREEMPT lppaca_shared_proc() takes a pointer to the lppaca which is typically accessed through get_lppaca(). With DEBUG_PREEMPT enabled, this leads to checking if preemption is enabled, for example: BUG: using smp_processor_id() in preemptible [00000000] code: grep/10693 caller is lparcfg_data+0x408/0x19a0 CPU: 4 PID: 10693 Comm: grep Not tainted 6.5.0-rc3 #2 Call Trace: dump_stack_lvl+0x154/0x200 (unreliable) check_preemption_disabled+0x214/0x220 lparcfg_data+0x408/0x19a0 ... This isn't actually a problem however, as it does not matter which lppaca is accessed, the shared proc state will be the same. vcpudispatch_stats_procfs_init() already works around this by disabling preemption, but the lparcfg code does not, erroring any time /proc/powerpc/lparcfg is accessed with DEBUG_PREEMPT enabled. Instead of disabling preemption on the caller side, rework lppaca_shared_proc() to not take a pointer and instead directly access the lppaca, bypassing any potential preemption checks. [mpe: Rework to avoid needing a definition in paca.h and lppaca.h] | ||||
| CVE-2023-54316 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: refscale: Fix uninitalized use of wait_queue_head_t Running the refscale test occasionally crashes the kernel with the following error: [ 8569.952896] BUG: unable to handle page fault for address: ffffffffffffffe8 [ 8569.952900] #PF: supervisor read access in kernel mode [ 8569.952902] #PF: error_code(0x0000) - not-present page [ 8569.952904] PGD c4b048067 P4D c4b049067 PUD c4b04b067 PMD 0 [ 8569.952910] Oops: 0000 [#1] PREEMPT_RT SMP NOPTI [ 8569.952916] Hardware name: Dell Inc. PowerEdge R750/0WMWCR, BIOS 1.2.4 05/28/2021 [ 8569.952917] RIP: 0010:prepare_to_wait_event+0x101/0x190 : [ 8569.952940] Call Trace: [ 8569.952941] <TASK> [ 8569.952944] ref_scale_reader+0x380/0x4a0 [refscale] [ 8569.952959] kthread+0x10e/0x130 [ 8569.952966] ret_from_fork+0x1f/0x30 [ 8569.952973] </TASK> The likely cause is that init_waitqueue_head() is called after the call to the torture_create_kthread() function that creates the ref_scale_reader kthread. Although this init_waitqueue_head() call will very likely complete before this kthread is created and starts running, it is possible that the calling kthread will be delayed between the calls to torture_create_kthread() and init_waitqueue_head(). In this case, the new kthread will use the waitqueue head before it is properly initialized, which is not good for the kernel's health and well-being. The above crash happened here: static inline void __add_wait_queue(...) { : if (!(wq->flags & WQ_FLAG_PRIORITY)) <=== Crash here The offset of flags from list_head entry in wait_queue_entry is -0x18. If reader_tasks[i].wq.head.next is NULL as allocated reader_task structure is zero initialized, the instruction will try to access address 0xffffffffffffffe8, which is exactly the fault address listed above. This commit therefore invokes init_waitqueue_head() before creating the kthread. | ||||
| CVE-2025-40218 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/damon/vaddr: do not repeat pte_offset_map_lock() until success DAMON's virtual address space operation set implementation (vaddr) calls pte_offset_map_lock() inside the page table walk callback function. This is for reading and writing page table accessed bits. If pte_offset_map_lock() fails, it retries by returning the page table walk callback function with ACTION_AGAIN. pte_offset_map_lock() can continuously fail if the target is a pmd migration entry, though. Hence it could cause an infinite page table walk if the migration cannot be done until the page table walk is finished. This indeed caused a soft lockup when CPU hotplugging and DAMON were running in parallel. Avoid the infinite loop by simply not retrying the page table walk. DAMON is promising only a best-effort accuracy, so missing access to such pages is no problem. | ||||
| CVE-2025-40089 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: cxl/features: Add check for no entries in cxl_feature_info cxl EDAC calls cxl_feature_info() to get the feature information and if the hardware has no Features support, cxlfs may be passed in as NULL. [ 51.957498] BUG: kernel NULL pointer dereference, address: 0000000000000008 [ 51.965571] #PF: supervisor read access in kernel mode [ 51.971559] #PF: error_code(0x0000) - not-present page [ 51.977542] PGD 17e4f6067 P4D 0 [ 51.981384] Oops: Oops: 0000 [#1] SMP NOPTI [ 51.986300] CPU: 49 UID: 0 PID: 3782 Comm: systemd-udevd Not tainted 6.17.0dj test+ #64 PREEMPT(voluntary) [ 51.997355] Hardware name: <removed> [ 52.009790] RIP: 0010:cxl_feature_info+0xa/0x80 [cxl_core] Add a check for cxlfs before dereferencing it and return -EOPNOTSUPP if there is no cxlfs created due to no hardware support. | ||||
| CVE-2022-50866 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: pxa: fix null-pointer dereference in filter() kasprintf() would return NULL pointer when kmalloc() fail to allocate. Need to check the return pointer before calling strcmp(). | ||||
| CVE-2025-40346 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: arch_topology: Fix incorrect error check in topology_parse_cpu_capacity() Fix incorrect use of PTR_ERR_OR_ZERO() in topology_parse_cpu_capacity() which causes the code to proceed with NULL clock pointers. The current logic uses !PTR_ERR_OR_ZERO(cpu_clk) which evaluates to true for both valid pointers and NULL, leading to potential NULL pointer dereference in clk_get_rate(). Per include/linux/err.h documentation, PTR_ERR_OR_ZERO(ptr) returns: "The error code within @ptr if it is an error pointer; 0 otherwise." This means PTR_ERR_OR_ZERO() returns 0 for both valid pointers AND NULL pointers. Therefore !PTR_ERR_OR_ZERO(cpu_clk) evaluates to true (proceed) when cpu_clk is either valid or NULL, causing clk_get_rate(NULL) to be called when of_clk_get() returns NULL. Replace with !IS_ERR_OR_NULL(cpu_clk) which only proceeds for valid pointers, preventing potential NULL pointer dereference in clk_get_rate(). | ||||
| CVE-2022-50835 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: jbd2: add miss release buffer head in fc_do_one_pass() In fc_do_one_pass() miss release buffer head after use which will lead to reference count leak. | ||||
| CVE-2022-50859 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: cifs: Fix the error length of VALIDATE_NEGOTIATE_INFO message Commit d5c7076b772a ("smb3: add smb3.1.1 to default dialect list") extend the dialects from 3 to 4, but forget to decrease the extended length when specific the dialect, then the message length is larger than expected. This maybe leak some info through network because not initialize the message body. After apply this patch, the VALIDATE_NEGOTIATE_INFO message length is reduced from 28 bytes to 26 bytes. | ||||
| CVE-2025-40329 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/sched: Fix deadlock in drm_sched_entity_kill_jobs_cb The Mesa issue referenced below pointed out a possible deadlock: [ 1231.611031] Possible interrupt unsafe locking scenario: [ 1231.611033] CPU0 CPU1 [ 1231.611034] ---- ---- [ 1231.611035] lock(&xa->xa_lock#17); [ 1231.611038] local_irq_disable(); [ 1231.611039] lock(&fence->lock); [ 1231.611041] lock(&xa->xa_lock#17); [ 1231.611044] <Interrupt> [ 1231.611045] lock(&fence->lock); [ 1231.611047] *** DEADLOCK *** In this example, CPU0 would be any function accessing job->dependencies through the xa_* functions that don't disable interrupts (eg: drm_sched_job_add_dependency(), drm_sched_entity_kill_jobs_cb()). CPU1 is executing drm_sched_entity_kill_jobs_cb() as a fence signalling callback so in an interrupt context. It will deadlock when trying to grab the xa_lock which is already held by CPU0. Replacing all xa_* usage by their xa_*_irq counterparts would fix this issue, but Christian pointed out another issue: dma_fence_signal takes fence.lock and so does dma_fence_add_callback. dma_fence_signal() // locks f1.lock -> drm_sched_entity_kill_jobs_cb() -> foreach dependencies -> dma_fence_add_callback() // locks f2.lock This will deadlock if f1 and f2 share the same spinlock. To fix both issues, the code iterating on dependencies and re-arming them is moved out to drm_sched_entity_kill_jobs_work(). [phasta: commit message nits] | ||||