Export limit exceeded: 23007 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (23007 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2023-53843 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: reject negative ifindex Recent changes in net-next (commit 759ab1edb56c ("net: store netdevs in an xarray")) refactored the handling of pre-assigned ifindexes and let syzbot surface a latent problem in ovs. ovs does not validate ifindex, making it possible to create netdev ports with negative ifindex values. It's easy to repro with YNL: $ ./cli.py --spec netlink/specs/ovs_datapath.yaml \ --do new \ --json '{"upcall-pid": 1, "name":"my-dp"}' $ ./cli.py --spec netlink/specs/ovs_vport.yaml \ --do new \ --json '{"upcall-pid": "00000001", "name": "some-port0", "dp-ifindex":3,"ifindex":4294901760,"type":2}' $ ip link show -65536: some-port0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 7a:48:21:ad:0b:fb brd ff:ff:ff:ff:ff:ff ... Validate the inputs. Now the second command correctly returns: $ ./cli.py --spec netlink/specs/ovs_vport.yaml \ --do new \ --json '{"upcall-pid": "00000001", "name": "some-port0", "dp-ifindex":3,"ifindex":4294901760,"type":2}' lib.ynl.NlError: Netlink error: Numerical result out of range nl_len = 108 (92) nl_flags = 0x300 nl_type = 2 error: -34 extack: {'msg': 'integer out of range', 'unknown': [[type:4 len:36] b'\x0c\x00\x02\x00\x00\x00\x00\x00\x00\x00\x00\x00\x0c\x00\x03\x00\xff\xff\xff\x7f\x00\x00\x00\x00\x08\x00\x01\x00\x08\x00\x00\x00'], 'bad-attr': '.ifindex'} Accept 0 since it used to be silently ignored. | ||||
| CVE-2022-50654 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix panic due to wrong pageattr of im->image In the scenario where livepatch and kretfunc coexist, the pageattr of im->image is rox after arch_prepare_bpf_trampoline in bpf_trampoline_update, and then modify_fentry or register_fentry returns -EAGAIN from bpf_tramp_ftrace_ops_func, the BPF_TRAMP_F_ORIG_STACK flag will be configured, and arch_prepare_bpf_trampoline will be re-executed. At this time, because the pageattr of im->image is rox, arch_prepare_bpf_trampoline will read and write im->image, which causes a fault. as follows: insmod livepatch-sample.ko # samples/livepatch/livepatch-sample.c bpftrace -e 'kretfunc:cmdline_proc_show {}' BUG: unable to handle page fault for address: ffffffffa0206000 PGD 322d067 P4D 322d067 PUD 322e063 PMD 1297e067 PTE d428061 Oops: 0003 [#1] PREEMPT SMP PTI CPU: 2 PID: 270 Comm: bpftrace Tainted: G E K 6.1.0 #5 RIP: 0010:arch_prepare_bpf_trampoline+0xed/0x8c0 RSP: 0018:ffffc90001083ad8 EFLAGS: 00010202 RAX: ffffffffa0206000 RBX: 0000000000000020 RCX: 0000000000000000 RDX: ffffffffa0206001 RSI: ffffffffa0206000 RDI: 0000000000000030 RBP: ffffc90001083b70 R08: 0000000000000066 R09: ffff88800f51b400 R10: 000000002e72c6e5 R11: 00000000d0a15080 R12: ffff8880110a68c8 R13: 0000000000000000 R14: ffff88800f51b400 R15: ffffffff814fec10 FS: 00007f87bc0dc780(0000) GS:ffff88803e600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffa0206000 CR3: 0000000010b70000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> bpf_trampoline_update+0x25a/0x6b0 __bpf_trampoline_link_prog+0x101/0x240 bpf_trampoline_link_prog+0x2d/0x50 bpf_tracing_prog_attach+0x24c/0x530 bpf_raw_tp_link_attach+0x73/0x1d0 __sys_bpf+0x100e/0x2570 __x64_sys_bpf+0x1c/0x30 do_syscall_64+0x5b/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd With this patch, when modify_fentry or register_fentry returns -EAGAIN from bpf_tramp_ftrace_ops_func, the pageattr of im->image will be reset to nx+rw. | ||||
| CVE-2025-71199 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: adc: at91-sama5d2_adc: Fix potential use-after-free in sama5d2_adc driver at91_adc_interrupt can call at91_adc_touch_data_handler function to start the work by schedule_work(&st->touch_st.workq). If we remove the module which will call at91_adc_remove to make cleanup, it will free indio_dev through iio_device_unregister but quite a bit later. While the work mentioned above will be used. The sequence of operations that may lead to a UAF bug is as follows: CPU0 CPU1 | at91_adc_workq_handler at91_adc_remove | iio_device_unregister(indio_dev) | //free indio_dev a bit later | | iio_push_to_buffers(indio_dev) | //use indio_dev Fix it by ensuring that the work is canceled before proceeding with the cleanup in at91_adc_remove. | ||||
| CVE-2025-68798 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: perf/x86/amd: Check event before enable to avoid GPF On AMD machines cpuc->events[idx] can become NULL in a subtle race condition with NMI->throttle->x86_pmu_stop(). Check event for NULL in amd_pmu_enable_all() before enable to avoid a GPF. This appears to be an AMD only issue. Syzkaller reported a GPF in amd_pmu_enable_all. INFO: NMI handler (perf_event_nmi_handler) took too long to run: 13.143 msecs Oops: general protection fault, probably for non-canonical address 0xdffffc0000000034: 0000 PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x00000000000001a0-0x00000000000001a7] CPU: 0 UID: 0 PID: 328415 Comm: repro_36674776 Not tainted 6.12.0-rc1-syzk RIP: 0010:x86_pmu_enable_event (arch/x86/events/perf_event.h:1195 arch/x86/events/core.c:1430) RSP: 0018:ffff888118009d60 EFLAGS: 00010012 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000034 RSI: 0000000000000000 RDI: 00000000000001a0 RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000002 R13: ffff88811802a440 R14: ffff88811802a240 R15: ffff8881132d8601 FS: 00007f097dfaa700(0000) GS:ffff888118000000(0000) GS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000200001c0 CR3: 0000000103d56000 CR4: 00000000000006f0 Call Trace: <IRQ> amd_pmu_enable_all (arch/x86/events/amd/core.c:760 (discriminator 2)) x86_pmu_enable (arch/x86/events/core.c:1360) event_sched_out (kernel/events/core.c:1191 kernel/events/core.c:1186 kernel/events/core.c:2346) __perf_remove_from_context (kernel/events/core.c:2435) event_function (kernel/events/core.c:259) remote_function (kernel/events/core.c:92 (discriminator 1) kernel/events/core.c:72 (discriminator 1)) __flush_smp_call_function_queue (./arch/x86/include/asm/jump_label.h:27 ./include/linux/jump_label.h:207 ./include/trace/events/csd.h:64 kernel/smp.c:135 kernel/smp.c:540) __sysvec_call_function_single (./arch/x86/include/asm/jump_label.h:27 ./include/linux/jump_label.h:207 ./arch/x86/include/asm/trace/irq_vectors.h:99 arch/x86/kernel/smp.c:272) sysvec_call_function_single (arch/x86/kernel/smp.c:266 (discriminator 47) arch/x86/kernel/smp.c:266 (discriminator 47)) </IRQ> | ||||
| CVE-2025-40113 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: remoteproc: qcom: pas: Shutdown lite ADSP DTB on X1E The ADSP firmware on X1E has separate firmware binaries for the main firmware and the DTB. The same applies for the "lite" firmware loaded by the boot firmware. When preparing to load the new ADSP firmware we shutdown the lite_pas_id for the main firmware, but we don't shutdown the corresponding lite pas_id for the DTB. The fact that we're leaving it "running" forever becomes obvious if you try to reuse (or just access) the memory region used by the "lite" firmware: The &adsp_boot_mem is accessible, but accessing the &adsp_boot_dtb_mem results in a crash. We don't support reusing the memory regions currently, but nevertheless we should not keep part of the lite firmware running. Fix this by adding the lite_dtb_pas_id and shutting it down as well. We don't have a way to detect if the lite firmware is actually running yet, so ignore the return status of qcom_scm_pas_shutdown() for now. This was already the case before, the assignment to "ret" is not used anywhere. | ||||
| CVE-2025-40137 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to truncate first page in error path of f2fs_truncate() syzbot reports a bug as below: loop0: detected capacity change from 0 to 40427 F2FS-fs (loop0): Wrong SSA boundary, start(3584) end(4096) blocks(3072) F2FS-fs (loop0): Can't find valid F2FS filesystem in 1th superblock F2FS-fs (loop0): invalid crc value F2FS-fs (loop0): f2fs_convert_inline_folio: corrupted inline inode ino=3, i_addr[0]:0x1601, run fsck to fix. ------------[ cut here ]------------ kernel BUG at fs/inode.c:753! RIP: 0010:clear_inode+0x169/0x190 fs/inode.c:753 Call Trace: <TASK> evict+0x504/0x9c0 fs/inode.c:810 f2fs_fill_super+0x5612/0x6fa0 fs/f2fs/super.c:5047 get_tree_bdev_flags+0x40e/0x4d0 fs/super.c:1692 vfs_get_tree+0x8f/0x2b0 fs/super.c:1815 do_new_mount+0x2a2/0x9e0 fs/namespace.c:3808 do_mount fs/namespace.c:4136 [inline] __do_sys_mount fs/namespace.c:4347 [inline] __se_sys_mount+0x317/0x410 fs/namespace.c:4324 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f During f2fs_evict_inode(), clear_inode() detects that we missed to truncate all page cache before destorying inode, that is because in below path, we will create page #0 in cache, but missed to drop it in error path, let's fix it. - evict - f2fs_evict_inode - f2fs_truncate - f2fs_convert_inline_inode - f2fs_grab_cache_folio : create page #0 in cache - f2fs_convert_inline_folio : sanity check failed, return -EFSCORRUPTED - clear_inode detects that inode->i_data.nrpages is not zero | ||||
| CVE-2025-40134 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: dm: fix NULL pointer dereference in __dm_suspend() There is a race condition between dm device suspend and table load that can lead to null pointer dereference. The issue occurs when suspend is invoked before table load completes: BUG: kernel NULL pointer dereference, address: 0000000000000054 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 6 PID: 6798 Comm: dmsetup Not tainted 6.6.0-g7e52f5f0ca9b #62 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.1-2.fc37 04/01/2014 RIP: 0010:blk_mq_wait_quiesce_done+0x0/0x50 Call Trace: <TASK> blk_mq_quiesce_queue+0x2c/0x50 dm_stop_queue+0xd/0x20 __dm_suspend+0x130/0x330 dm_suspend+0x11a/0x180 dev_suspend+0x27e/0x560 ctl_ioctl+0x4cf/0x850 dm_ctl_ioctl+0xd/0x20 vfs_ioctl+0x1d/0x50 __se_sys_ioctl+0x9b/0xc0 __x64_sys_ioctl+0x19/0x30 x64_sys_call+0x2c4a/0x4620 do_syscall_64+0x9e/0x1b0 The issue can be triggered as below: T1 T2 dm_suspend table_load __dm_suspend dm_setup_md_queue dm_mq_init_request_queue blk_mq_init_allocated_queue => q->mq_ops = set->ops; (1) dm_stop_queue / dm_wait_for_completion => q->tag_set NULL pointer! (2) => q->tag_set = set; (3) Fix this by checking if a valid table (map) exists before performing request-based suspend and waiting for target I/O. When map is NULL, skip these table-dependent suspend steps. Even when map is NULL, no I/O can reach any target because there is no table loaded; I/O submitted in this state will fail early in the DM layer. Skipping the table-dependent suspend logic in this case is safe and avoids NULL pointer dereferences. | ||||
| CVE-2025-40138 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid NULL pointer dereference in f2fs_check_quota_consistency() syzbot reported a f2fs bug as below: Oops: gen[ 107.736417][ T5848] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 1 UID: 0 PID: 5848 Comm: syz-executor263 Tainted: G W 6.17.0-rc1-syzkaller-00014-g0e39a731820a #0 PREEMPT_{RT,(full)} RIP: 0010:strcmp+0x3c/0xc0 lib/string.c:284 Call Trace: <TASK> f2fs_check_quota_consistency fs/f2fs/super.c:1188 [inline] f2fs_check_opt_consistency+0x1378/0x2c10 fs/f2fs/super.c:1436 __f2fs_remount fs/f2fs/super.c:2653 [inline] f2fs_reconfigure+0x482/0x1770 fs/f2fs/super.c:5297 reconfigure_super+0x224/0x890 fs/super.c:1077 do_remount fs/namespace.c:3314 [inline] path_mount+0xd18/0xfe0 fs/namespace.c:4112 do_mount fs/namespace.c:4133 [inline] __do_sys_mount fs/namespace.c:4344 [inline] __se_sys_mount+0x317/0x410 fs/namespace.c:4321 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f The direct reason is f2fs_check_quota_consistency() may suffer null-ptr-deref issue in strcmp(). The bug can be reproduced w/ below scripts: mkfs.f2fs -f /dev/vdb mount -t f2fs -o usrquota /dev/vdb /mnt/f2fs quotacheck -uc /mnt/f2fs/ umount /mnt/f2fs mount -t f2fs -o usrjquota=aquota.user,jqfmt=vfsold /dev/vdb /mnt/f2fs mount -t f2fs -o remount,usrjquota=,jqfmt=vfsold /dev/vdb /mnt/f2fs umount /mnt/f2fs So, before old_qname and new_qname comparison, we need to check whether they are all valid pointers, fix it. | ||||
| CVE-2025-40153 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: mm: hugetlb: avoid soft lockup when mprotect to large memory area When calling mprotect() to a large hugetlb memory area in our customer's workload (~300GB hugetlb memory), soft lockup was observed: watchdog: BUG: soft lockup - CPU#98 stuck for 23s! [t2_new_sysv:126916] CPU: 98 PID: 126916 Comm: t2_new_sysv Kdump: loaded Not tainted 6.17-rc7 Hardware name: GIGACOMPUTING R2A3-T40-AAV1/Jefferson CIO, BIOS 5.4.4.1 07/15/2025 pstate: 20400009 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : mte_clear_page_tags+0x14/0x24 lr : mte_sync_tags+0x1c0/0x240 sp : ffff80003150bb80 x29: ffff80003150bb80 x28: ffff00739e9705a8 x27: 0000ffd2d6a00000 x26: 0000ff8e4bc00000 x25: 00e80046cde00f45 x24: 0000000000022458 x23: 0000000000000000 x22: 0000000000000004 x21: 000000011b380000 x20: ffff000000000000 x19: 000000011b379f40 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : ffffc875e0aa5e2c x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000000000 x5 : fffffc01ce7a5c00 x4 : 00000000046cde00 x3 : fffffc0000000000 x2 : 0000000000000004 x1 : 0000000000000040 x0 : ffff0046cde7c000 Call trace: mte_clear_page_tags+0x14/0x24 set_huge_pte_at+0x25c/0x280 hugetlb_change_protection+0x220/0x430 change_protection+0x5c/0x8c mprotect_fixup+0x10c/0x294 do_mprotect_pkey.constprop.0+0x2e0/0x3d4 __arm64_sys_mprotect+0x24/0x44 invoke_syscall+0x50/0x160 el0_svc_common+0x48/0x144 do_el0_svc+0x30/0xe0 el0_svc+0x30/0xf0 el0t_64_sync_handler+0xc4/0x148 el0t_64_sync+0x1a4/0x1a8 Soft lockup is not triggered with THP or base page because there is cond_resched() called for each PMD size. Although the soft lockup was triggered by MTE, it should be not MTE specific. The other processing which takes long time in the loop may trigger soft lockup too. So add cond_resched() for hugetlb to avoid soft lockup. | ||||
| CVE-2025-68796 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid updating zero-sized extent in extent cache As syzbot reported: F2FS-fs (loop0): __update_extent_tree_range: extent len is zero, type: 0, extent [0, 0, 0], age [0, 0] ------------[ cut here ]------------ kernel BUG at fs/f2fs/extent_cache.c:678! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI CPU: 0 UID: 0 PID: 5336 Comm: syz.0.0 Not tainted syzkaller #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:__update_extent_tree_range+0x13bc/0x1500 fs/f2fs/extent_cache.c:678 Call Trace: <TASK> f2fs_update_read_extent_cache_range+0x192/0x3e0 fs/f2fs/extent_cache.c:1085 f2fs_do_zero_range fs/f2fs/file.c:1657 [inline] f2fs_zero_range+0x10c1/0x1580 fs/f2fs/file.c:1737 f2fs_fallocate+0x583/0x990 fs/f2fs/file.c:2030 vfs_fallocate+0x669/0x7e0 fs/open.c:342 ioctl_preallocate fs/ioctl.c:289 [inline] file_ioctl+0x611/0x780 fs/ioctl.c:-1 do_vfs_ioctl+0xb33/0x1430 fs/ioctl.c:576 __do_sys_ioctl fs/ioctl.c:595 [inline] __se_sys_ioctl+0x82/0x170 fs/ioctl.c:583 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f07bc58eec9 In error path of f2fs_zero_range(), it may add a zero-sized extent into extent cache, it should be avoided. | ||||
| CVE-2025-68758 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: backlight: led-bl: Add devlink to supplier LEDs LED Backlight is a consumer of one or multiple LED class devices, but devlink is currently unable to create correct supplier-producer links when the supplier is a class device. It creates instead a link where the supplier is the parent of the expected device. One consequence is that removal order is not correctly enforced. Issues happen for example with the following sections in a device tree overlay: // An LED driver chip pca9632@62 { compatible = "nxp,pca9632"; reg = <0x62>; // ... addon_led_pwm: led-pwm@3 { reg = <3>; label = "addon:led:pwm"; }; }; backlight-addon { compatible = "led-backlight"; leds = <&addon_led_pwm>; brightness-levels = <255>; default-brightness-level = <255>; }; In this example, the devlink should be created between the backlight-addon (consumer) and the pca9632@62 (supplier). Instead it is created between the backlight-addon (consumer) and the parent of the pca9632@62, which is typically the I2C bus adapter. On removal of the above overlay, the LED driver can be removed before the backlight device, resulting in: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010 ... Call trace: led_put+0xe0/0x140 devm_led_release+0x6c/0x98 Another way to reproduce the bug without any device tree overlays is unbinding the LED class device (pca9632@62) before unbinding the consumer (backlight-addon): echo 11-0062 >/sys/bus/i2c/drivers/leds-pca963x/unbind echo ...backlight-dock >/sys/bus/platform/drivers/led-backlight/unbind Fix by adding a devlink between the consuming led-backlight device and the supplying LED device, as other drivers and subsystems do as well. | ||||
| CVE-2025-68335 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: comedi: pcl818: fix null-ptr-deref in pcl818_ai_cancel() Syzbot identified an issue [1] in pcl818_ai_cancel(), which stems from the fact that in case of early device detach via pcl818_detach(), subdevice dev->read_subdev may not have initialized its pointer to &struct comedi_async as intended. Thus, any such dereferencing of &s->async->cmd will lead to general protection fault and kernel crash. Mitigate this problem by removing a call to pcl818_ai_cancel() from pcl818_detach() altogether. This way, if the subdevice setups its support for async commands, everything async-related will be handled via subdevice's own ->cancel() function in comedi_device_detach_locked() even before pcl818_detach(). If no support for asynchronous commands is provided, there is no need to cancel anything either. [1] Syzbot crash: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000005: 0000 [#1] SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f] CPU: 1 UID: 0 PID: 6050 Comm: syz.0.18 Not tainted syzkaller #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/18/2025 RIP: 0010:pcl818_ai_cancel+0x69/0x3f0 drivers/comedi/drivers/pcl818.c:762 ... Call Trace: <TASK> pcl818_detach+0x66/0xd0 drivers/comedi/drivers/pcl818.c:1115 comedi_device_detach_locked+0x178/0x750 drivers/comedi/drivers.c:207 do_devconfig_ioctl drivers/comedi/comedi_fops.c:848 [inline] comedi_unlocked_ioctl+0xcde/0x1020 drivers/comedi/comedi_fops.c:2178 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:597 [inline] ... | ||||
| CVE-2025-40119 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ext4: fix potential null deref in ext4_mb_init() In ext4_mb_init(), ext4_mb_avg_fragment_size_destroy() may be called when sbi->s_mb_avg_fragment_size remains uninitialized (e.g., if groupinfo slab cache allocation fails). Since ext4_mb_avg_fragment_size_destroy() lacks null pointer checking, this leads to a null pointer dereference. ================================================================== EXT4-fs: no memory for groupinfo slab cache BUG: kernel NULL pointer dereference, address: 0000000000000000 PGD 0 P4D 0 Oops: Oops: 0002 [#1] SMP PTI CPU:2 UID: 0 PID: 87 Comm:mount Not tainted 6.17.0-rc2 #1134 PREEMPT(none) RIP: 0010:_raw_spin_lock_irqsave+0x1b/0x40 Call Trace: <TASK> xa_destroy+0x61/0x130 ext4_mb_init+0x483/0x540 __ext4_fill_super+0x116d/0x17b0 ext4_fill_super+0xd3/0x280 get_tree_bdev_flags+0x132/0x1d0 vfs_get_tree+0x29/0xd0 do_new_mount+0x197/0x300 __x64_sys_mount+0x116/0x150 do_syscall_64+0x50/0x1c0 entry_SYSCALL_64_after_hwframe+0x76/0x7e ================================================================== Therefore, add necessary null check to ext4_mb_avg_fragment_size_destroy() to prevent this issue. The same fix is also applied to ext4_mb_largest_free_orders_destroy(). | ||||
| CVE-2025-68324 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: imm: Fix use-after-free bug caused by unfinished delayed work The delayed work item 'imm_tq' is initialized in imm_attach() and scheduled via imm_queuecommand() for processing SCSI commands. When the IMM parallel port SCSI host adapter is detached through imm_detach(), the imm_struct device instance is deallocated. However, the delayed work might still be pending or executing when imm_detach() is called, leading to use-after-free bugs when the work function imm_interrupt() accesses the already freed imm_struct memory. The race condition can occur as follows: CPU 0(detach thread) | CPU 1 | imm_queuecommand() | imm_queuecommand_lck() imm_detach() | schedule_delayed_work() kfree(dev) //FREE | imm_interrupt() | dev = container_of(...) //USE dev-> //USE Add disable_delayed_work_sync() in imm_detach() to guarantee proper cancellation of the delayed work item before imm_struct is deallocated. | ||||
| CVE-2025-68329 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Fix WARN_ON in tracing_buffers_mmap_close for split VMAs When a VMA is split (e.g., by partial munmap or MAP_FIXED), the kernel calls vm_ops->close on each portion. For trace buffer mappings, this results in ring_buffer_unmap() being called multiple times while ring_buffer_map() was only called once. This causes ring_buffer_unmap() to return -ENODEV on subsequent calls because user_mapped is already 0, triggering a WARN_ON. Trace buffer mappings cannot support partial mappings because the ring buffer structure requires the complete buffer including the meta page. Fix this by adding a may_split callback that returns -EINVAL to prevent VMA splits entirely. | ||||
| CVE-2025-68319 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netconsole: Acquire su_mutex before navigating configs hierarchy There is a race between operations that iterate over the userdata cg_children list and concurrent add/remove of userdata items through configfs. The update_userdata() function iterates over the nt->userdata_group.cg_children list, and count_extradata_entries() also iterates over this same list to count nodes. Quoting from Documentation/filesystems/configfs.rst: > A subsystem can navigate the cg_children list and the ci_parent pointer > to see the tree created by the subsystem. This can race with configfs' > management of the hierarchy, so configfs uses the subsystem mutex to > protect modifications. Whenever a subsystem wants to navigate the > hierarchy, it must do so under the protection of the subsystem > mutex. Without proper locking, if a userdata item is added or removed concurrently while these functions are iterating, the list can be accessed in an inconsistent state. For example, the list_for_each() loop can reach a node that is being removed from the list by list_del_init() which sets the nodes' .next pointer to point to itself, so the loop will never end (or reach the WARN_ON_ONCE in update_userdata() ). Fix this by holding the configfs subsystem mutex (su_mutex) during all operations that iterate over cg_children. This includes: - userdatum_value_store() which calls update_userdata() to iterate over cg_children - All sysdata_*_enabled_store() functions which call count_extradata_entries() to iterate over cg_children The su_mutex must be acquired before dynamic_netconsole_mutex to avoid potential lock ordering issues, as configfs operations may already hold su_mutex when calling into our code. | ||||
| CVE-2025-68298 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btusb: mediatek: Avoid btusb_mtk_claim_iso_intf() NULL deref In btusb_mtk_setup(), we set `btmtk_data->isopkt_intf` to: usb_ifnum_to_if(data->udev, MTK_ISO_IFNUM) That function can return NULL in some cases. Even when it returns NULL, though, we still go on to call btusb_mtk_claim_iso_intf(). As of commit e9087e828827 ("Bluetooth: btusb: mediatek: Add locks for usb_driver_claim_interface()"), calling btusb_mtk_claim_iso_intf() when `btmtk_data->isopkt_intf` is NULL will cause a crash because we'll end up passing a bad pointer to device_lock(). Prior to that commit we'd pass the NULL pointer directly to usb_driver_claim_interface() which would detect it and return an error, which was handled. Resolve the crash in btusb_mtk_claim_iso_intf() by adding a NULL check at the start of the function. This makes the code handle a NULL `btmtk_data->isopkt_intf` the same way it did before the problematic commit (just with a slight change to the error message printed). | ||||
| CVE-2025-68288 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: storage: Fix memory leak in USB bulk transport A kernel memory leak was identified by the 'ioctl_sg01' test from Linux Test Project (LTP). The following bytes were mainly observed: 0x53425355. When USB storage devices incorrectly skip the data phase with status data, the code extracts/validates the CSW from the sg buffer, but fails to clear it afterwards. This leaves status protocol data in srb's transfer buffer, such as the US_BULK_CS_SIGN 'USBS' signature observed here. Thus, this can lead to USB protocols leaks to user space through SCSI generic (/dev/sg*) interfaces, such as the one seen here when the LTP test requested 512 KiB. Fix the leak by zeroing the CSW data in srb's transfer buffer immediately after the validation of devices that skip data phase. Note: Differently from CVE-2018-1000204, which fixed a big leak by zero- ing pages at allocation time, this leak occurs after allocation, when USB protocol data is written to already-allocated sg pages. | ||||
| CVE-2025-68282 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: udc: fix use-after-free in usb_gadget_state_work A race condition during gadget teardown can lead to a use-after-free in usb_gadget_state_work(), as reported by KASAN: BUG: KASAN: invalid-access in sysfs_notify+0x2c/0xd0 Workqueue: events usb_gadget_state_work The fundamental race occurs because a concurrent event (e.g., an interrupt) can call usb_gadget_set_state() and schedule gadget->work at any time during the cleanup process in usb_del_gadget(). Commit 399a45e5237c ("usb: gadget: core: flush gadget workqueue after device removal") attempted to fix this by moving flush_work() to after device_del(). However, this does not fully solve the race, as a new work item can still be scheduled *after* flush_work() completes but before the gadget's memory is freed, leading to the same use-after-free. This patch fixes the race condition robustly by introducing a 'teardown' flag and a 'state_lock' spinlock to the usb_gadget struct. The flag is set during cleanup in usb_del_gadget() *before* calling flush_work() to prevent any new work from being scheduled once cleanup has commenced. The scheduling site, usb_gadget_set_state(), now checks this flag under the lock before queueing the work, thus safely closing the race window. | ||||
| CVE-2025-68262 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: crypto: zstd - fix double-free in per-CPU stream cleanup The crypto/zstd module has a double-free bug that occurs when multiple tfms are allocated and freed. The issue happens because zstd_streams (per-CPU contexts) are freed in zstd_exit() during every tfm destruction, rather than being managed at the module level. When multiple tfms exist, each tfm exit attempts to free the same shared per-CPU streams, resulting in a double-free. This leads to a stack trace similar to: BUG: Bad page state in process kworker/u16:1 pfn:106fd93 page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x106fd93 flags: 0x17ffffc0000000(node=0|zone=2|lastcpupid=0x1fffff) page_type: 0xffffffff() raw: 0017ffffc0000000 dead000000000100 dead000000000122 0000000000000000 raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: nonzero entire_mapcount Modules linked in: ... CPU: 3 UID: 0 PID: 2506 Comm: kworker/u16:1 Kdump: loaded Tainted: G B Hardware name: ... Workqueue: btrfs-delalloc btrfs_work_helper Call Trace: <TASK> dump_stack_lvl+0x5d/0x80 bad_page+0x71/0xd0 free_unref_page_prepare+0x24e/0x490 free_unref_page+0x60/0x170 crypto_acomp_free_streams+0x5d/0xc0 crypto_acomp_exit_tfm+0x23/0x50 crypto_destroy_tfm+0x60/0xc0 ... Change the lifecycle management of zstd_streams to free the streams only once during module cleanup. | ||||