Export limit exceeded: 23100 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (23100 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-68230 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix gpu page fault after hibernation on PF passthrough On PF passthrough environment, after hibernate and then resume, coralgemm will cause gpu page fault. Mode1 reset happens during hibernate, but partition mode is not restored on resume, register mmCP_HYP_XCP_CTL and mmCP_PSP_XCP_CTL is not right after resume. When CP access the MQD BO, wrong stride size is used, this will cause out of bound access on the MQD BO, resulting page fault. The fix is to ensure gfx_v9_4_3_switch_compute_partition() is called when resume from a hibernation. KFD resume is called separately during a reset recovery or resume from suspend sequence. Hence it's not required to be called as part of partition switch. (cherry picked from commit 5d1b32cfe4a676fe552416cb5ae847b215463a1a) | ||||
| CVE-2025-43079 | 3 Linux, Qualys, Qualys Inc | 4 Linux, Cloud Agent, Cloud Agent For Linux and 1 more | 2026-04-15 | 6.3 Medium |
| The Qualys Cloud Agent included a bundled uninstall script (qagent_uninstall.sh), specific to Mac and Linux supported versions that invoked multiple system commands without using absolute paths and without sanitizing the $PATH environment. If the uninstall script is executed with elevated privileges (e.g., via sudo) in an environment where $PATH has been manipulated, an attacker with root/sudo privileges could cause malicious executables to be run in place of the intended system binaries. This behavior can be leveraged for local privilege escalation and arbitrary command execution under elevated privileges. | ||||
| CVE-2025-40147 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: blk-throttle: fix access race during throttle policy activation On repeated cold boots we occasionally hit a NULL pointer crash in blk_should_throtl() when throttling is consulted before the throttle policy is fully enabled for the queue. Checking only q->td != NULL is insufficient during early initialization, so blkg_to_pd() for the throttle policy can still return NULL and blkg_to_tg() becomes NULL, which later gets dereferenced. Unable to handle kernel NULL pointer dereference at virtual address 0000000000000156 ... pc : submit_bio_noacct+0x14c/0x4c8 lr : submit_bio_noacct+0x48/0x4c8 sp : ffff800087f0b690 x29: ffff800087f0b690 x28: 0000000000005f90 x27: ffff00068af393c0 x26: 0000000000080000 x25: 000000000002fbc0 x24: ffff000684ddcc70 x23: 0000000000000000 x22: 0000000000000000 x21: 0000000000000000 x20: 0000000000080000 x19: ffff000684ddcd08 x18: ffffffffffffffff x17: 0000000000000000 x16: ffff80008132a550 x15: 0000ffff98020fff x14: 0000000000000000 x13: 1fffe000d11d7021 x12: ffff000688eb810c x11: ffff00077ec4bb80 x10: ffff000688dcb720 x9 : ffff80008068ef60 x8 : 00000a6fb8a86e85 x7 : 000000000000111e x6 : 0000000000000002 x5 : 0000000000000246 x4 : 0000000000015cff x3 : 0000000000394500 x2 : ffff000682e35e40 x1 : 0000000000364940 x0 : 000000000000001a Call trace: submit_bio_noacct+0x14c/0x4c8 verity_map+0x178/0x2c8 __map_bio+0x228/0x250 dm_submit_bio+0x1c4/0x678 __submit_bio+0x170/0x230 submit_bio_noacct_nocheck+0x16c/0x388 submit_bio_noacct+0x16c/0x4c8 submit_bio+0xb4/0x210 f2fs_submit_read_bio+0x4c/0xf0 f2fs_mpage_readpages+0x3b0/0x5f0 f2fs_readahead+0x90/0xe8 Tighten blk_throtl_activated() to also require that the throttle policy bit is set on the queue: return q->td != NULL && test_bit(blkcg_policy_throtl.plid, q->blkcg_pols); This prevents blk_should_throtl() from accessing throttle group state until policy data has been attached to blkgs. | ||||
| CVE-2025-40070 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: pps: fix warning in pps_register_cdev when register device fail Similar to previous commit 2a934fdb01db ("media: v4l2-dev: fix error handling in __video_register_device()"), the release hook should be set before device_register(). Otherwise, when device_register() return error and put_device() try to callback the release function, the below warning may happen. ------------[ cut here ]------------ WARNING: CPU: 1 PID: 4760 at drivers/base/core.c:2567 device_release+0x1bd/0x240 drivers/base/core.c:2567 Modules linked in: CPU: 1 UID: 0 PID: 4760 Comm: syz.4.914 Not tainted 6.17.0-rc3+ #1 NONE RIP: 0010:device_release+0x1bd/0x240 drivers/base/core.c:2567 Call Trace: <TASK> kobject_cleanup+0x136/0x410 lib/kobject.c:689 kobject_release lib/kobject.c:720 [inline] kref_put include/linux/kref.h:65 [inline] kobject_put+0xe9/0x130 lib/kobject.c:737 put_device+0x24/0x30 drivers/base/core.c:3797 pps_register_cdev+0x2da/0x370 drivers/pps/pps.c:402 pps_register_source+0x2f6/0x480 drivers/pps/kapi.c:108 pps_tty_open+0x190/0x310 drivers/pps/clients/pps-ldisc.c:57 tty_ldisc_open+0xa7/0x120 drivers/tty/tty_ldisc.c:432 tty_set_ldisc+0x333/0x780 drivers/tty/tty_ldisc.c:563 tiocsetd drivers/tty/tty_io.c:2429 [inline] tty_ioctl+0x5d1/0x1700 drivers/tty/tty_io.c:2728 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:598 [inline] __se_sys_ioctl fs/ioctl.c:584 [inline] __x64_sys_ioctl+0x194/0x210 fs/ioctl.c:584 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x5f/0x2a0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x76/0x7e </TASK> Before commit c79a39dc8d06 ("pps: Fix a use-after-free"), pps_register_cdev() call device_create() to create pps->dev, which will init dev->release to device_create_release(). Now the comment is outdated, just remove it. Thanks for the reminder from Calvin Owens, 'kfree_pps' should be removed in pps_register_source() to avoid a double free in the failure case. | ||||
| CVE-2025-40315 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_fs: Fix epfile null pointer access after ep enable. A race condition occurs when ffs_func_eps_enable() runs concurrently with ffs_data_reset(). The ffs_data_clear() called in ffs_data_reset() sets ffs->epfiles to NULL before resetting ffs->eps_count to 0, leading to a NULL pointer dereference when accessing epfile->ep in ffs_func_eps_enable() after successful usb_ep_enable(). The ffs->epfiles pointer is set to NULL in both ffs_data_clear() and ffs_data_close() functions, and its modification is protected by the spinlock ffs->eps_lock. And the whole ffs_func_eps_enable() function is also protected by ffs->eps_lock. Thus, add NULL pointer handling for ffs->epfiles in the ffs_func_eps_enable() function to fix issues | ||||
| CVE-2022-50882 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: uvcvideo: Fix memory leak in uvc_gpio_parse Previously the unit buffer was allocated before checking the IRQ for privacy GPIO. In case of error, the unit buffer was leaked. Allocate the unit buffer after the IRQ to avoid it. Addresses-Coverity-ID: 1474639 ("Resource leak") | ||||
| CVE-2023-54302 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/irdma: Fix data race on CQP completion stats CQP completion statistics is read lockesly in irdma_wait_event and irdma_check_cqp_progress while it can be updated in the completion thread irdma_sc_ccq_get_cqe_info on another CPU as KCSAN reports. Make completion statistics an atomic variable to reflect coherent updates to it. This will also avoid load/store tearing logic bug potentially possible by compiler optimizations. [77346.170861] BUG: KCSAN: data-race in irdma_handle_cqp_op [irdma] / irdma_sc_ccq_get_cqe_info [irdma] [77346.171383] write to 0xffff8a3250b108e0 of 8 bytes by task 9544 on cpu 4: [77346.171483] irdma_sc_ccq_get_cqe_info+0x27a/0x370 [irdma] [77346.171658] irdma_cqp_ce_handler+0x164/0x270 [irdma] [77346.171835] cqp_compl_worker+0x1b/0x20 [irdma] [77346.172009] process_one_work+0x4d1/0xa40 [77346.172024] worker_thread+0x319/0x700 [77346.172037] kthread+0x180/0x1b0 [77346.172054] ret_from_fork+0x22/0x30 [77346.172136] read to 0xffff8a3250b108e0 of 8 bytes by task 9838 on cpu 2: [77346.172234] irdma_handle_cqp_op+0xf4/0x4b0 [irdma] [77346.172413] irdma_cqp_aeq_cmd+0x75/0xa0 [irdma] [77346.172592] irdma_create_aeq+0x390/0x45a [irdma] [77346.172769] irdma_rt_init_hw.cold+0x212/0x85d [irdma] [77346.172944] irdma_probe+0x54f/0x620 [irdma] [77346.173122] auxiliary_bus_probe+0x66/0xa0 [77346.173137] really_probe+0x140/0x540 [77346.173154] __driver_probe_device+0xc7/0x220 [77346.173173] driver_probe_device+0x5f/0x140 [77346.173190] __driver_attach+0xf0/0x2c0 [77346.173208] bus_for_each_dev+0xa8/0xf0 [77346.173225] driver_attach+0x29/0x30 [77346.173240] bus_add_driver+0x29c/0x2f0 [77346.173255] driver_register+0x10f/0x1a0 [77346.173272] __auxiliary_driver_register+0xbc/0x140 [77346.173287] irdma_init_module+0x55/0x1000 [irdma] [77346.173460] do_one_initcall+0x7d/0x410 [77346.173475] do_init_module+0x81/0x2c0 [77346.173491] load_module+0x1232/0x12c0 [77346.173506] __do_sys_finit_module+0x101/0x180 [77346.173522] __x64_sys_finit_module+0x3c/0x50 [77346.173538] do_syscall_64+0x39/0x90 [77346.173553] entry_SYSCALL_64_after_hwframe+0x63/0xcd [77346.173634] value changed: 0x0000000000000094 -> 0x0000000000000095 | ||||
| CVE-2025-68213 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: idpf: fix possible vport_config NULL pointer deref in remove Attempting to remove the driver will cause a crash in cases where the vport failed to initialize. Following trace is from an instance where the driver failed during an attempt to create a VF: [ 1661.543624] idpf 0000:84:00.7: Device HW Reset initiated [ 1722.923726] idpf 0000:84:00.7: Transaction timed-out (op:1 cookie:2900 vc_op:1 salt:29 timeout:60000ms) [ 1723.353263] BUG: kernel NULL pointer dereference, address: 0000000000000028 ... [ 1723.358472] RIP: 0010:idpf_remove+0x11c/0x200 [idpf] ... [ 1723.364973] Call Trace: [ 1723.365475] <TASK> [ 1723.365972] pci_device_remove+0x42/0xb0 [ 1723.366481] device_release_driver_internal+0x1a9/0x210 [ 1723.366987] pci_stop_bus_device+0x6d/0x90 [ 1723.367488] pci_stop_and_remove_bus_device+0x12/0x20 [ 1723.367971] pci_iov_remove_virtfn+0xbd/0x120 [ 1723.368309] sriov_disable+0x34/0xe0 [ 1723.368643] idpf_sriov_configure+0x58/0x140 [idpf] [ 1723.368982] sriov_numvfs_store+0xda/0x1c0 Avoid the NULL pointer dereference by adding NULL pointer check for vport_config[i], before freeing user_config.q_coalesce. | ||||
| CVE-2025-13524 | 4 Amazon, Apple, Linux and 1 more | 4 Aws Wickr, Macos, Linux and 1 more | 2026-04-15 | 5.7 Medium |
| Improper resource release in the call termination process in AWS Wickr before version 6.62.13 on Windows, macOS and Linux may allow a call participant to continue receiving audio input from another user after they close their call window. This issue occurs under certain conditions, which require the affected user to take a particular action within the application To mitigate this issue, users should upgrade AWS Wickr, Wickr Gov and Wickr Enterprise desktop version to version 6.62.13. | ||||
| CVE-2025-39992 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: mm: swap: check for stable address space before operating on the VMA It is possible to hit a zero entry while traversing the vmas in unuse_mm() called from swapoff path and accessing it causes the OOPS: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000446--> Loading the memory from offset 0x40 on the XA_ZERO_ENTRY as address. Mem abort info: ESR = 0x0000000096000005 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x05: level 1 translation fault The issue is manifested from the below race between the fork() on a process and swapoff: fork(dup_mmap()) swapoff(unuse_mm) --------------- ----------------- 1) Identical mtree is built using __mt_dup(). 2) copy_pte_range()--> copy_nonpresent_pte(): The dst mm is added into the mmlist to be visible to the swapoff operation. 3) Fatal signal is sent to the parent process(which is the current during the fork) thus skip the duplication of the vmas and mark the vma range with XA_ZERO_ENTRY as a marker for this process that helps during exit_mmap(). 4) swapoff is tried on the 'mm' added to the 'mmlist' as part of the 2. 5) unuse_mm(), that iterates through the vma's of this 'mm' will hit the non-NULL zero entry and operating on this zero entry as a vma is resulting into the oops. The proper fix would be around not exposing this partially-valid tree to others when droping the mmap lock, which is being solved with [1]. A simpler solution would be checking for MMF_UNSTABLE, as it is set if mm_struct is not fully initialized in dup_mmap(). Thanks to Liam/Lorenzo/David for all the suggestions in fixing this issue. | ||||
| CVE-2023-54324 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dm: fix a race condition in retrieve_deps There's a race condition in the multipath target when retrieve_deps races with multipath_message calling dm_get_device and dm_put_device. retrieve_deps walks the list of open devices without holding any lock but multipath may add or remove devices to the list while it is running. The end result may be memory corruption or use-after-free memory access. See this description of a UAF with multipath_message(): https://listman.redhat.com/archives/dm-devel/2022-October/052373.html Fix this bug by introducing a new rw semaphore "devices_lock". We grab devices_lock for read in retrieve_deps and we grab it for write in dm_get_device and dm_put_device. | ||||
| CVE-2023-54300 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath9k: avoid referencing uninit memory in ath9k_wmi_ctrl_rx For the reasons also described in commit b383e8abed41 ("wifi: ath9k: avoid uninit memory read in ath9k_htc_rx_msg()"), ath9k_htc_rx_msg() should validate pkt_len before accessing the SKB. For example, the obtained SKB may have been badly constructed with pkt_len = 8. In this case, the SKB can only contain a valid htc_frame_hdr but after being processed in ath9k_htc_rx_msg() and passed to ath9k_wmi_ctrl_rx() endpoint RX handler, it is expected to have a WMI command header which should be located inside its data payload. Implement sanity checking inside ath9k_wmi_ctrl_rx(). Otherwise, uninit memory can be referenced. Tested on Qualcomm Atheros Communications AR9271 802.11n . Found by Linux Verification Center (linuxtesting.org) with Syzkaller. | ||||
| CVE-2023-54295 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: mtd: spi-nor: Fix shift-out-of-bounds in spi_nor_set_erase_type spi_nor_set_erase_type() was used either to set or to mask out an erase type. When we used it to mask out an erase type a shift-out-of-bounds was hit: UBSAN: shift-out-of-bounds in drivers/mtd/spi-nor/core.c:2237:24 shift exponent 4294967295 is too large for 32-bit type 'int' The setting of the size_{shift, mask} and of the opcode are unnecessary when the erase size is zero, as throughout the code just the erase size is considered to determine whether an erase type is supported or not. Setting the opcode to 0xFF was wrong too as nobody guarantees that 0xFF is an unused opcode. Thus when masking out an erase type, just set the erase size to zero. This will fix the shift-out-of-bounds. [ta: refine changes, new commit message, fix compilation error] | ||||
| CVE-2023-54278 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: s390/vmem: split pages when debug pagealloc is enabled Since commit bb1520d581a3 ("s390/mm: start kernel with DAT enabled") the kernel crashes early during boot when debug pagealloc is enabled: mem auto-init: stack:off, heap alloc:off, heap free:off addressing exception: 0005 ilc:2 [#1] SMP DEBUG_PAGEALLOC Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 6.5.0-rc3-09759-gc5666c912155 #630 [..] Krnl Code: 00000000001325f6: ec5600248064 cgrj %r5,%r6,8,000000000013263e 00000000001325fc: eb880002000c srlg %r8,%r8,2 #0000000000132602: b2210051 ipte %r5,%r1,%r0,0 >0000000000132606: b90400d1 lgr %r13,%r1 000000000013260a: 41605008 la %r6,8(%r5) 000000000013260e: a7db1000 aghi %r13,4096 0000000000132612: b221006d ipte %r6,%r13,%r0,0 0000000000132616: e3d0d0000171 lay %r13,4096(%r13) Call Trace: __kernel_map_pages+0x14e/0x320 __free_pages_ok+0x23a/0x5a8) free_low_memory_core_early+0x214/0x2c8 memblock_free_all+0x28/0x58 mem_init+0xb6/0x228 mm_core_init+0xb6/0x3b0 start_kernel+0x1d2/0x5a8 startup_continue+0x36/0x40 Kernel panic - not syncing: Fatal exception: panic_on_oops This is caused by using large mappings on machines with EDAT1/EDAT2. Add the code to split the mappings into 4k pages if debug pagealloc is enabled by CONFIG_DEBUG_PAGEALLOC_ENABLE_DEFAULT or the debug_pagealloc kernel command line option. | ||||
| CVE-2023-54276 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: move init of percpu reply_cache_stats counters back to nfsd_init_net Commit f5f9d4a314da ("nfsd: move reply cache initialization into nfsd startup") moved the initialization of the reply cache into nfsd startup, but didn't account for the stats counters, which can be accessed before nfsd is ever started. The result can be a NULL pointer dereference when someone accesses /proc/fs/nfsd/reply_cache_stats while nfsd is still shut down. This is a regression and a user-triggerable oops in the right situation: - non-x86_64 arch - /proc/fs/nfsd is mounted in the namespace - nfsd is not started in the namespace - unprivileged user calls "cat /proc/fs/nfsd/reply_cache_stats" Although this is easy to trigger on some arches (like aarch64), on x86_64, calling this_cpu_ptr(NULL) evidently returns a pointer to the fixed_percpu_data. That struct looks just enough like a newly initialized percpu var to allow nfsd_reply_cache_stats_show to access it without Oopsing. Move the initialization of the per-net+per-cpu reply-cache counters back into nfsd_init_net, while leaving the rest of the reply cache allocations to be done at nfsd startup time. Kudos to Eirik who did most of the legwork to track this down. | ||||
| CVE-2022-50875 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: of: overlay: fix null pointer dereferencing in find_dup_cset_node_entry() and find_dup_cset_prop() When kmalloc() fail to allocate memory in kasprintf(), fn_1 or fn_2 will be NULL, and strcmp() will cause null pointer dereference. | ||||
| CVE-2023-54232 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: m68k: Only force 030 bus error if PC not in exception table __get_kernel_nofault() does copy data in supervisor mode when forcing a task backtrace log through /proc/sysrq_trigger. This is expected cause a bus error exception on e.g. NULL pointer dereferencing when logging a kernel task has no workqueue associated. This bus error ought to be ignored. Our 030 bus error handler is ill equipped to deal with this: Whenever ssw indicates a kernel mode access on a data fault, we don't even attempt to handle the fault and instead always send a SEGV signal (or panic). As a result, the check for exception handling at the fault PC (buried in send_sig_fault() which gets called from do_page_fault() eventually) is never used. In contrast, both 040 and 060 access error handlers do not care whether a fault happened on supervisor mode access, and will call do_page_fault() on those, ultimately honoring the exception table. Add a check in bus_error030 to call do_page_fault() in case we do have an entry for the fault PC in our exception table. I had attempted a fix for this earlier in 2019 that did rely on testing pagefault_disabled() (see link below) to achieve the same thing, but this patch should be more generic. Tested on 030 Atari Falcon. | ||||
| CVE-2023-54229 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix registration of 6Ghz-only phy without the full channel range Because of what seems to be a typo, a 6Ghz-only phy for which the BDF does not allow the 7115Mhz channel will fail to register: WARNING: CPU: 2 PID: 106 at net/wireless/core.c:907 wiphy_register+0x914/0x954 Modules linked in: ath11k_pci sbsa_gwdt CPU: 2 PID: 106 Comm: kworker/u8:5 Not tainted 6.3.0-rc7-next-20230418-00549-g1e096a17625a-dirty #9 Hardware name: Freebox V7R Board (DT) Workqueue: ath11k_qmi_driver_event ath11k_qmi_driver_event_work pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : wiphy_register+0x914/0x954 lr : ieee80211_register_hw+0x67c/0xc10 sp : ffffff800b123aa0 x29: ffffff800b123aa0 x28: 0000000000000000 x27: 0000000000000000 x26: 0000000000000000 x25: 0000000000000006 x24: ffffffc008d51418 x23: ffffffc008cb0838 x22: ffffff80176c2460 x21: 0000000000000168 x20: ffffff80176c0000 x19: ffffff80176c03e0 x18: 0000000000000014 x17: 00000000cbef338c x16: 00000000d2a26f21 x15: 00000000ad6bb85f x14: 0000000000000020 x13: 0000000000000020 x12: 00000000ffffffbd x11: 0000000000000208 x10: 00000000fffffdf7 x9 : ffffffc009394718 x8 : ffffff80176c0528 x7 : 000000007fffffff x6 : 0000000000000006 x5 : 0000000000000005 x4 : ffffff800b304284 x3 : ffffff800b304284 x2 : ffffff800b304d98 x1 : 0000000000000000 x0 : 0000000000000000 Call trace: wiphy_register+0x914/0x954 ieee80211_register_hw+0x67c/0xc10 ath11k_mac_register+0x7c4/0xe10 ath11k_core_qmi_firmware_ready+0x1f4/0x570 ath11k_qmi_driver_event_work+0x198/0x590 process_one_work+0x1b8/0x328 worker_thread+0x6c/0x414 kthread+0x100/0x104 ret_from_fork+0x10/0x20 ---[ end trace 0000000000000000 ]--- ath11k_pci 0002:01:00.0: ieee80211 registration failed: -22 ath11k_pci 0002:01:00.0: failed register the radio with mac80211: -22 ath11k_pci 0002:01:00.0: failed to create pdev core: -22 | ||||
| CVE-2023-54226 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: af_unix: Fix data races around sk->sk_shutdown. KCSAN found a data race around sk->sk_shutdown where unix_release_sock() and unix_shutdown() update it under unix_state_lock(), OTOH unix_poll() and unix_dgram_poll() read it locklessly. We need to annotate the writes and reads with WRITE_ONCE() and READ_ONCE(). BUG: KCSAN: data-race in unix_poll / unix_release_sock write to 0xffff88800d0f8aec of 1 bytes by task 264 on cpu 0: unix_release_sock+0x75c/0x910 net/unix/af_unix.c:631 unix_release+0x59/0x80 net/unix/af_unix.c:1042 __sock_release+0x7d/0x170 net/socket.c:653 sock_close+0x19/0x30 net/socket.c:1397 __fput+0x179/0x5e0 fs/file_table.c:321 ____fput+0x15/0x20 fs/file_table.c:349 task_work_run+0x116/0x1a0 kernel/task_work.c:179 resume_user_mode_work include/linux/resume_user_mode.h:49 [inline] exit_to_user_mode_loop kernel/entry/common.c:171 [inline] exit_to_user_mode_prepare+0x174/0x180 kernel/entry/common.c:204 __syscall_exit_to_user_mode_work kernel/entry/common.c:286 [inline] syscall_exit_to_user_mode+0x1a/0x30 kernel/entry/common.c:297 do_syscall_64+0x4b/0x90 arch/x86/entry/common.c:86 entry_SYSCALL_64_after_hwframe+0x72/0xdc read to 0xffff88800d0f8aec of 1 bytes by task 222 on cpu 1: unix_poll+0xa3/0x2a0 net/unix/af_unix.c:3170 sock_poll+0xcf/0x2b0 net/socket.c:1385 vfs_poll include/linux/poll.h:88 [inline] ep_item_poll.isra.0+0x78/0xc0 fs/eventpoll.c:855 ep_send_events fs/eventpoll.c:1694 [inline] ep_poll fs/eventpoll.c:1823 [inline] do_epoll_wait+0x6c4/0xea0 fs/eventpoll.c:2258 __do_sys_epoll_wait fs/eventpoll.c:2270 [inline] __se_sys_epoll_wait fs/eventpoll.c:2265 [inline] __x64_sys_epoll_wait+0xcc/0x190 fs/eventpoll.c:2265 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x72/0xdc value changed: 0x00 -> 0x03 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 222 Comm: dbus-broker Not tainted 6.3.0-rc7-02330-gca6270c12e20 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 | ||||
| CVE-2023-54181 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix issue in verifying allow_ptr_leaks After we converted the capabilities of our networking-bpf program from cap_sys_admin to cap_net_admin+cap_bpf, our networking-bpf program failed to start. Because it failed the bpf verifier, and the error log is "R3 pointer comparison prohibited". A simple reproducer as follows, SEC("cls-ingress") int ingress(struct __sk_buff *skb) { struct iphdr *iph = (void *)(long)skb->data + sizeof(struct ethhdr); if ((long)(iph + 1) > (long)skb->data_end) return TC_ACT_STOLEN; return TC_ACT_OK; } Per discussion with Yonghong and Alexei [1], comparison of two packet pointers is not a pointer leak. This patch fixes it. Our local kernel is 6.1.y and we expect this fix to be backported to 6.1.y, so stable is CCed. [1]. https://lore.kernel.org/bpf/CAADnVQ+Nmspr7Si+pxWn8zkE7hX-7s93ugwC+94aXSy4uQ9vBg@mail.gmail.com/ | ||||