Export limit exceeded: 23007 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (23007 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2022-50828 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: clk: zynqmp: Fix stack-out-of-bounds in strncpy` "BUG: KASAN: stack-out-of-bounds in strncpy+0x30/0x68" Linux-ATF interface is using 16 bytes of SMC payload. In case clock name is longer than 15 bytes, string terminated NULL character will not be received by Linux. Add explicit NULL character at last byte to fix issues when clock name is longer. This fixes below bug reported by KASAN: ================================================================== BUG: KASAN: stack-out-of-bounds in strncpy+0x30/0x68 Read of size 1 at addr ffff0008c89a7410 by task swapper/0/1 CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.4.0-00396-g81ef9e7-dirty #3 Hardware name: Xilinx Versal vck190 Eval board revA (QSPI) (DT) Call trace: dump_backtrace+0x0/0x1e8 show_stack+0x14/0x20 dump_stack+0xd4/0x108 print_address_description.isra.0+0xbc/0x37c __kasan_report+0x144/0x198 kasan_report+0xc/0x18 __asan_load1+0x5c/0x68 strncpy+0x30/0x68 zynqmp_clock_probe+0x238/0x7b8 platform_drv_probe+0x6c/0xc8 really_probe+0x14c/0x418 driver_probe_device+0x74/0x130 __device_attach_driver+0xc4/0xe8 bus_for_each_drv+0xec/0x150 __device_attach+0x160/0x1d8 device_initial_probe+0x10/0x18 bus_probe_device+0xe0/0xf0 device_add+0x528/0x950 of_device_add+0x5c/0x80 of_platform_device_create_pdata+0x120/0x168 of_platform_bus_create+0x244/0x4e0 of_platform_populate+0x50/0xe8 zynqmp_firmware_probe+0x370/0x3a8 platform_drv_probe+0x6c/0xc8 really_probe+0x14c/0x418 driver_probe_device+0x74/0x130 device_driver_attach+0x94/0xa0 __driver_attach+0x70/0x108 bus_for_each_dev+0xe4/0x158 driver_attach+0x30/0x40 bus_add_driver+0x21c/0x2b8 driver_register+0xbc/0x1d0 __platform_driver_register+0x7c/0x88 zynqmp_firmware_driver_init+0x1c/0x24 do_one_initcall+0xa4/0x234 kernel_init_freeable+0x1b0/0x24c kernel_init+0x10/0x110 ret_from_fork+0x10/0x18 The buggy address belongs to the page: page:ffff0008f9be1c88 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 raw: 0008d00000000000 ffff0008f9be1c90 ffff0008f9be1c90 0000000000000000 raw: 0000000000000000 0000000000000000 00000000ffffffff page dumped because: kasan: bad access detected addr ffff0008c89a7410 is located in stack of task swapper/0/1 at offset 112 in frame: zynqmp_clock_probe+0x0/0x7b8 this frame has 3 objects: [32, 44) 'response' [64, 80) 'ret_payload' [96, 112) 'name' Memory state around the buggy address: ffff0008c89a7300: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff0008c89a7380: 00 00 00 00 f1 f1 f1 f1 00 04 f2 f2 00 00 f2 f2 >ffff0008c89a7400: 00 00 f3 f3 00 00 00 00 00 00 00 00 00 00 00 00 ^ ffff0008c89a7480: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff0008c89a7500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ================================================================== | ||||
| CVE-2022-50845 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ext4: fix inode leak in ext4_xattr_inode_create() on an error path There is issue as follows when do setxattr with inject fault: [localhost]# fsck.ext4 -fn /dev/sda e2fsck 1.46.6-rc1 (12-Sep-2022) Pass 1: Checking inodes, blocks, and sizes Pass 2: Checking directory structure Pass 3: Checking directory connectivity Pass 4: Checking reference counts Unattached zero-length inode 15. Clear? no Unattached inode 15 Connect to /lost+found? no Pass 5: Checking group summary information /dev/sda: ********** WARNING: Filesystem still has errors ********** /dev/sda: 15/655360 files (0.0% non-contiguous), 66755/2621440 blocks This occurs in 'ext4_xattr_inode_create()'. If 'ext4_mark_inode_dirty()' fails, dropping i_nlink of the inode is needed. Or will lead to inode leak. | ||||
| CVE-2023-53756 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: VMX: Fix crash due to uninitialized current_vmcs KVM enables 'Enlightened VMCS' and 'Enlightened MSR Bitmap' when running as a nested hypervisor on top of Hyper-V. When MSR bitmap is updated, evmcs_touch_msr_bitmap function uses current_vmcs per-cpu variable to mark that the msr bitmap was changed. vmx_vcpu_create() modifies the msr bitmap via vmx_disable_intercept_for_msr -> vmx_msr_bitmap_l01_changed which in the end calls this function. The function checks for current_vmcs if it is null but the check is insufficient because current_vmcs is not initialized. Because of this, the code might incorrectly write to the structure pointed by current_vmcs value left by another task. Preemption is not disabled, the current task can be preempted and moved to another CPU while current_vmcs is accessed multiple times from evmcs_touch_msr_bitmap() which leads to crash. The manipulation of MSR bitmaps by callers happens only for vmcs01 so the solution is to use vmx->vmcs01.vmcs instead of current_vmcs. BUG: kernel NULL pointer dereference, address: 0000000000000338 PGD 4e1775067 P4D 0 Oops: 0002 [#1] PREEMPT SMP NOPTI ... RIP: 0010:vmx_msr_bitmap_l01_changed+0x39/0x50 [kvm_intel] ... Call Trace: vmx_disable_intercept_for_msr+0x36/0x260 [kvm_intel] vmx_vcpu_create+0xe6/0x540 [kvm_intel] kvm_arch_vcpu_create+0x1d1/0x2e0 [kvm] kvm_vm_ioctl_create_vcpu+0x178/0x430 [kvm] kvm_vm_ioctl+0x53f/0x790 [kvm] __x64_sys_ioctl+0x8a/0xc0 do_syscall_64+0x5c/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd | ||||
| CVE-2023-53761 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: USB: usbtmc: Fix direction for 0-length ioctl control messages The syzbot fuzzer found a problem in the usbtmc driver: When a user submits an ioctl for a 0-length control transfer, the driver does not check that the direction is set to OUT: ------------[ cut here ]------------ usb 3-1: BOGUS control dir, pipe 80000b80 doesn't match bRequestType fd WARNING: CPU: 0 PID: 5100 at drivers/usb/core/urb.c:411 usb_submit_urb+0x14a7/0x1880 drivers/usb/core/urb.c:411 Modules linked in: CPU: 0 PID: 5100 Comm: syz-executor428 Not tainted 6.3.0-syzkaller-12049-g58390c8ce1bd #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/14/2023 RIP: 0010:usb_submit_urb+0x14a7/0x1880 drivers/usb/core/urb.c:411 Code: 7c 24 40 e8 1b 13 5c fb 48 8b 7c 24 40 e8 21 1d f0 fe 45 89 e8 44 89 f1 4c 89 e2 48 89 c6 48 c7 c7 e0 b5 fc 8a e8 19 c8 23 fb <0f> 0b e9 9f ee ff ff e8 ed 12 5c fb 0f b6 1d 12 8a 3c 08 31 ff 41 RSP: 0018:ffffc90003d2fb00 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff8880789e9058 RCX: 0000000000000000 RDX: ffff888029593b80 RSI: ffffffff814c1447 RDI: 0000000000000001 RBP: ffff88801ea742f8 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000001 R12: ffff88802915e528 R13: 00000000000000fd R14: 0000000080000b80 R15: ffff8880222b3100 FS: 0000555556ca63c0(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f9ef4d18150 CR3: 0000000073e5b000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> usb_start_wait_urb+0x101/0x4b0 drivers/usb/core/message.c:58 usb_internal_control_msg drivers/usb/core/message.c:102 [inline] usb_control_msg+0x320/0x4a0 drivers/usb/core/message.c:153 usbtmc_ioctl_request drivers/usb/class/usbtmc.c:1954 [inline] usbtmc_ioctl+0x1b3d/0x2840 drivers/usb/class/usbtmc.c:2097 To fix this, we must override the direction in the bRequestType field of the control request structure when the length is 0. | ||||
| CVE-2023-53777 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: erofs: kill hooked chains to avoid loops on deduplicated compressed images After heavily stressing EROFS with several images which include a hand-crafted image of repeated patterns for more than 46 days, I found two chains could be linked with each other almost simultaneously and form a loop so that the entire loop won't be submitted. As a consequence, the corresponding file pages will remain locked forever. It can be _only_ observed on data-deduplicated compressed images. For example, consider two chains with five pclusters in total: Chain 1: 2->3->4->5 -- The tail pcluster is 5; Chain 2: 5->1->2 -- The tail pcluster is 2. Chain 2 could link to Chain 1 with pcluster 5; and Chain 1 could link to Chain 2 at the same time with pcluster 2. Since hooked chains are all linked locklessly now, I have no idea how to simply avoid the race. Instead, let's avoid hooked chains completely until I could work out a proper way to fix this and end users finally tell us that it's needed to add it back. Actually, this optimization can be found with multi-threaded workloads (especially even more often on deduplicated compressed images), yet I'm not sure about the overall system impacts of not having this compared with implementation complexity. | ||||
| CVE-2023-53788 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: hda/ca0132: fixup buffer overrun at tuning_ctl_set() tuning_ctl_set() might have buffer overrun at (X) if it didn't break from loop by matching (A). static int tuning_ctl_set(...) { for (i = 0; i < TUNING_CTLS_COUNT; i++) (A) if (nid == ca0132_tuning_ctls[i].nid) break; snd_hda_power_up(...); (X) dspio_set_param(..., ca0132_tuning_ctls[i].mid, ...); snd_hda_power_down(...); ^ return 1; } We will get below error by cppcheck sound/pci/hda/patch_ca0132.c:4229:2: note: After for loop, i has value 12 for (i = 0; i < TUNING_CTLS_COUNT; i++) ^ sound/pci/hda/patch_ca0132.c:4234:43: note: Array index out of bounds dspio_set_param(codec, ca0132_tuning_ctls[i].mid, 0x20, ^ This patch cares non match case. | ||||
| CVE-2023-53798 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ethtool: Fix uninitialized number of lanes It is not possible to set the number of lanes when setting link modes using the legacy IOCTL ethtool interface. Since 'struct ethtool_link_ksettings' is not initialized in this path, drivers receive an uninitialized number of lanes in 'struct ethtool_link_ksettings::lanes'. When this information is later queried from drivers, it results in the ethtool code making decisions based on uninitialized memory, leading to the following KMSAN splat [1]. In practice, this most likely only happens with the tun driver that simply returns whatever it got in the set operation. As far as I can tell, this uninitialized memory is not leaked to user space thanks to the 'ethtool_ops->cap_link_lanes_supported' check in linkmodes_prepare_data(). Fix by initializing the structure in the IOCTL path. Did not find any more call sites that pass an uninitialized structure when calling 'ethtool_ops::set_link_ksettings()'. [1] BUG: KMSAN: uninit-value in ethnl_update_linkmodes net/ethtool/linkmodes.c:273 [inline] BUG: KMSAN: uninit-value in ethnl_set_linkmodes+0x190b/0x19d0 net/ethtool/linkmodes.c:333 ethnl_update_linkmodes net/ethtool/linkmodes.c:273 [inline] ethnl_set_linkmodes+0x190b/0x19d0 net/ethtool/linkmodes.c:333 ethnl_default_set_doit+0x88d/0xde0 net/ethtool/netlink.c:640 genl_family_rcv_msg_doit net/netlink/genetlink.c:968 [inline] genl_family_rcv_msg net/netlink/genetlink.c:1048 [inline] genl_rcv_msg+0x141a/0x14c0 net/netlink/genetlink.c:1065 netlink_rcv_skb+0x3f8/0x750 net/netlink/af_netlink.c:2577 genl_rcv+0x40/0x60 net/netlink/genetlink.c:1076 netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline] netlink_unicast+0xf41/0x1270 net/netlink/af_netlink.c:1365 netlink_sendmsg+0x127d/0x1430 net/netlink/af_netlink.c:1942 sock_sendmsg_nosec net/socket.c:724 [inline] sock_sendmsg net/socket.c:747 [inline] ____sys_sendmsg+0xa24/0xe40 net/socket.c:2501 ___sys_sendmsg+0x2a1/0x3f0 net/socket.c:2555 __sys_sendmsg net/socket.c:2584 [inline] __do_sys_sendmsg net/socket.c:2593 [inline] __se_sys_sendmsg net/socket.c:2591 [inline] __x64_sys_sendmsg+0x36b/0x540 net/socket.c:2591 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Uninit was stored to memory at: tun_get_link_ksettings+0x37/0x60 drivers/net/tun.c:3544 __ethtool_get_link_ksettings+0x17b/0x260 net/ethtool/ioctl.c:441 ethnl_set_linkmodes+0xee/0x19d0 net/ethtool/linkmodes.c:327 ethnl_default_set_doit+0x88d/0xde0 net/ethtool/netlink.c:640 genl_family_rcv_msg_doit net/netlink/genetlink.c:968 [inline] genl_family_rcv_msg net/netlink/genetlink.c:1048 [inline] genl_rcv_msg+0x141a/0x14c0 net/netlink/genetlink.c:1065 netlink_rcv_skb+0x3f8/0x750 net/netlink/af_netlink.c:2577 genl_rcv+0x40/0x60 net/netlink/genetlink.c:1076 netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline] netlink_unicast+0xf41/0x1270 net/netlink/af_netlink.c:1365 netlink_sendmsg+0x127d/0x1430 net/netlink/af_netlink.c:1942 sock_sendmsg_nosec net/socket.c:724 [inline] sock_sendmsg net/socket.c:747 [inline] ____sys_sendmsg+0xa24/0xe40 net/socket.c:2501 ___sys_sendmsg+0x2a1/0x3f0 net/socket.c:2555 __sys_sendmsg net/socket.c:2584 [inline] __do_sys_sendmsg net/socket.c:2593 [inline] __se_sys_sendmsg net/socket.c:2591 [inline] __x64_sys_sendmsg+0x36b/0x540 net/socket.c:2591 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Uninit was stored to memory at: tun_set_link_ksettings+0x37/0x60 drivers/net/tun.c:3553 ethtool_set_link_ksettings+0x600/0x690 net/ethtool/ioctl.c:609 __dev_ethtool net/ethtool/ioctl.c:3024 [inline] dev_ethtool+0x1db9/0x2a70 net/ethtool/ioctl.c:3078 dev_ioctl+0xb07/0x1270 net/core/dev_ioctl.c:524 sock_do_ioctl+0x295/0x540 net/socket.c:1213 sock_i ---truncated--- | ||||
| CVE-2023-53813 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ext4: fix rbtree traversal bug in ext4_mb_use_preallocated During allocations, while looking for preallocations(PA) in the per inode rbtree, we can't do a direct traversal of the tree because ext4_mb_discard_group_preallocation() can paralelly mark the pa deleted and that can cause direct traversal to skip some entries. This was leading to a BUG_ON() being hit [1] when we missed a PA that could satisfy our request and ultimately tried to create a new PA that would overlap with the missed one. To makes sure we handle that case while still keeping the performance of the rbtree, we make use of the fact that the only pa that could possibly overlap the original goal start is the one that satisfies the below conditions: 1. It must have it's logical start immediately to the left of (ie less than) original logical start. 2. It must not be deleted To find this pa we use the following traversal method: 1. Descend into the rbtree normally to find the immediate neighboring PA. Here we keep descending irrespective of if the PA is deleted or if it overlaps with our request etc. The goal is to find an immediately adjacent PA. 2. If the found PA is on right of original goal, use rb_prev() to find the left adjacent PA. 3. Check if this PA is deleted and keep moving left with rb_prev() until a non deleted PA is found. 4. This is the PA we are looking for. Now we can check if it can satisfy the original request and proceed accordingly. This approach also takes care of having deleted PAs in the tree. (While we are at it, also fix a possible overflow bug in calculating the end of a PA) [1] https://lore.kernel.org/linux-ext4/CA+G9fYv2FRpLqBZf34ZinR8bU2_ZRAUOjKAD3+tKRFaEQHtt8Q@mail.gmail.com/ | ||||
| CVE-2023-53825 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: kcm: Fix error handling for SOCK_DGRAM in kcm_sendmsg(). syzkaller found a memory leak in kcm_sendmsg(), and commit c821a88bd720 ("kcm: Fix memory leak in error path of kcm_sendmsg()") suppressed it by updating kcm_tx_msg(head)->last_skb if partial data is copied so that the following sendmsg() will resume from the skb. However, we cannot know how many bytes were copied when we get the error. Thus, we could mess up the MSG_MORE queue. When kcm_sendmsg() fails for SOCK_DGRAM, we should purge the queue as we do so for UDP by udp_flush_pending_frames(). Even without this change, when the error occurred, the following sendmsg() resumed from a wrong skb and the queue was messed up. However, we have yet to get such a report, and only syzkaller stumbled on it. So, this can be changed safely. Note this does not change SOCK_SEQPACKET behaviour. | ||||
| CVE-2023-53847 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb-storage: alauda: Fix uninit-value in alauda_check_media() Syzbot got KMSAN to complain about access to an uninitialized value in the alauda subdriver of usb-storage: BUG: KMSAN: uninit-value in alauda_transport+0x462/0x57f0 drivers/usb/storage/alauda.c:1137 CPU: 0 PID: 12279 Comm: usb-storage Not tainted 5.3.0-rc7+ #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x191/0x1f0 lib/dump_stack.c:113 kmsan_report+0x13a/0x2b0 mm/kmsan/kmsan_report.c:108 __msan_warning+0x73/0xe0 mm/kmsan/kmsan_instr.c:250 alauda_check_media+0x344/0x3310 drivers/usb/storage/alauda.c:460 The problem is that alauda_check_media() doesn't verify that its USB transfer succeeded before trying to use the received data. What should happen if the transfer fails isn't entirely clear, but a reasonably conservative approach is to pretend that no media is present. A similar problem exists in a usb_stor_dbg() call in alauda_get_media_status(). In this case, when an error occurs the call is redundant, because usb_stor_ctrl_transfer() already will print a debugging message. Finally, unrelated to the uninitialized memory access, is the fact that alauda_check_media() performs DMA to a buffer on the stack. Fortunately usb-storage provides a general purpose DMA-able buffer for uses like this. We'll use it instead. | ||||
| CVE-2023-53852 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nvme-core: fix memory leak in dhchap_secret_store Free dhchap_secret in nvme_ctrl_dhchap_secret_store() before we return fix following kmemleack:- unreferenced object 0xffff8886376ea800 (size 64): comm "check", pid 22048, jiffies 4344316705 (age 92.199s) hex dump (first 32 bytes): 44 48 48 43 2d 31 3a 30 30 3a 6e 78 72 35 4b 67 DHHC-1:00:nxr5Kg 75 58 34 75 6f 41 78 73 4a 61 34 63 2f 68 75 4c uX4uoAxsJa4c/huL backtrace: [<0000000030ce5d4b>] __kmalloc+0x4b/0x130 [<000000009be1cdc1>] nvme_ctrl_dhchap_secret_store+0x8f/0x160 [nvme_core] [<00000000ac06c96a>] kernfs_fop_write_iter+0x12b/0x1c0 [<00000000437e7ced>] vfs_write+0x2ba/0x3c0 [<00000000f9491baf>] ksys_write+0x5f/0xe0 [<000000001c46513d>] do_syscall_64+0x3b/0x90 [<00000000ecf348fe>] entry_SYSCALL_64_after_hwframe+0x72/0xdc unreferenced object 0xffff8886376eaf00 (size 64): comm "check", pid 22048, jiffies 4344316736 (age 92.168s) hex dump (first 32 bytes): 44 48 48 43 2d 31 3a 30 30 3a 6e 78 72 35 4b 67 DHHC-1:00:nxr5Kg 75 58 34 75 6f 41 78 73 4a 61 34 63 2f 68 75 4c uX4uoAxsJa4c/huL backtrace: [<0000000030ce5d4b>] __kmalloc+0x4b/0x130 [<000000009be1cdc1>] nvme_ctrl_dhchap_secret_store+0x8f/0x160 [nvme_core] [<00000000ac06c96a>] kernfs_fop_write_iter+0x12b/0x1c0 [<00000000437e7ced>] vfs_write+0x2ba/0x3c0 [<00000000f9491baf>] ksys_write+0x5f/0xe0 [<000000001c46513d>] do_syscall_64+0x3b/0x90 [<00000000ecf348fe>] entry_SYSCALL_64_after_hwframe+0x72/0xdc | ||||
| CVE-2023-53859 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: s390/idle: mark arch_cpu_idle() noinstr linux-next commit ("cpuidle: tracing: Warn about !rcu_is_watching()") adds a new warning which hits on s390's arch_cpu_idle() function: RCU not on for: arch_cpu_idle+0x0/0x28 WARNING: CPU: 2 PID: 0 at include/linux/trace_recursion.h:162 arch_ftrace_ops_list_func+0x24c/0x258 Modules linked in: CPU: 2 PID: 0 Comm: swapper/2 Not tainted 6.2.0-rc6-next-20230202 #4 Hardware name: IBM 8561 T01 703 (z/VM 7.3.0) Krnl PSW : 0404d00180000000 00000000002b55c0 (arch_ftrace_ops_list_func+0x250/0x258) R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:3 CC:1 PM:0 RI:0 EA:3 Krnl GPRS: c0000000ffffbfff 0000000080000002 0000000000000026 0000000000000000 0000037ffffe3a28 0000037ffffe3a20 0000000000000000 0000000000000000 0000000000000000 0000000000f4acf6 00000000001044f0 0000037ffffe3cb0 0000000000000000 0000000000000000 00000000002b55bc 0000037ffffe3bb8 Krnl Code: 00000000002b55b0: c02000840051 larl %r2,0000000001335652 00000000002b55b6: c0e5fff512d1 brasl %r14,0000000000157b58 #00000000002b55bc: af000000 mc 0,0 >00000000002b55c0: a7f4ffe7 brc 15,00000000002b558e 00000000002b55c4: 0707 bcr 0,%r7 00000000002b55c6: 0707 bcr 0,%r7 00000000002b55c8: eb6ff0480024 stmg %r6,%r15,72(%r15) 00000000002b55ce: b90400ef lgr %r14,%r15 Call Trace: [<00000000002b55c0>] arch_ftrace_ops_list_func+0x250/0x258 ([<00000000002b55bc>] arch_ftrace_ops_list_func+0x24c/0x258) [<0000000000f5f0fc>] ftrace_common+0x1c/0x20 [<00000000001044f6>] arch_cpu_idle+0x6/0x28 [<0000000000f4acf6>] default_idle_call+0x76/0x128 [<00000000001cc374>] do_idle+0xf4/0x1b0 [<00000000001cc6ce>] cpu_startup_entry+0x36/0x40 [<0000000000119d00>] smp_start_secondary+0x140/0x150 [<0000000000f5d2ae>] restart_int_handler+0x6e/0x90 Mark arch_cpu_idle() noinstr like all other architectures with CONFIG_ARCH_WANTS_NO_INSTR (should) have it to fix this. | ||||
| CVE-2023-53995 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net: ipv4: fix one memleak in __inet_del_ifa() I got the below warning when do fuzzing test: unregister_netdevice: waiting for bond0 to become free. Usage count = 2 It can be repoduced via: ip link add bond0 type bond sysctl -w net.ipv4.conf.bond0.promote_secondaries=1 ip addr add 4.117.174.103/0 scope 0x40 dev bond0 ip addr add 192.168.100.111/255.255.255.254 scope 0 dev bond0 ip addr add 0.0.0.4/0 scope 0x40 secondary dev bond0 ip addr del 4.117.174.103/0 scope 0x40 dev bond0 ip link delete bond0 type bond In this reproduction test case, an incorrect 'last_prim' is found in __inet_del_ifa(), as a result, the secondary address(0.0.0.4/0 scope 0x40) is lost. The memory of the secondary address is leaked and the reference of in_device and net_device is leaked. Fix this problem: Look for 'last_prim' starting at location of the deleted IP and inserting the promoted IP into the location of 'last_prim'. | ||||
| CVE-2023-54007 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: vmci_host: fix a race condition in vmci_host_poll() causing GPF During fuzzing, a general protection fault is observed in vmci_host_poll(). general protection fault, probably for non-canonical address 0xdffffc0000000019: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x00000000000000c8-0x00000000000000cf] RIP: 0010:__lock_acquire+0xf3/0x5e00 kernel/locking/lockdep.c:4926 <- omitting registers -> Call Trace: <TASK> lock_acquire+0x1a4/0x4a0 kernel/locking/lockdep.c:5672 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0xb3/0x100 kernel/locking/spinlock.c:162 add_wait_queue+0x3d/0x260 kernel/sched/wait.c:22 poll_wait include/linux/poll.h:49 [inline] vmci_host_poll+0xf8/0x2b0 drivers/misc/vmw_vmci/vmci_host.c:174 vfs_poll include/linux/poll.h:88 [inline] do_pollfd fs/select.c:873 [inline] do_poll fs/select.c:921 [inline] do_sys_poll+0xc7c/0x1aa0 fs/select.c:1015 __do_sys_ppoll fs/select.c:1121 [inline] __se_sys_ppoll+0x2cc/0x330 fs/select.c:1101 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x4e/0xa0 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Example thread interleaving that causes the general protection fault is as follows: CPU1 (vmci_host_poll) CPU2 (vmci_host_do_init_context) ----- ----- // Read uninitialized context context = vmci_host_dev->context; // Initialize context vmci_host_dev->context = vmci_ctx_create(); vmci_host_dev->ct_type = VMCIOBJ_CONTEXT; if (vmci_host_dev->ct_type == VMCIOBJ_CONTEXT) { // Dereferencing the wrong pointer poll_wait(..., &context->host_context); } In this scenario, vmci_host_poll() reads vmci_host_dev->context first, and then reads vmci_host_dev->ct_type to check that vmci_host_dev->context is initialized. However, since these two reads are not atomically executed, there is a chance of a race condition as described above. To fix this race condition, read vmci_host_dev->context after checking the value of vmci_host_dev->ct_type so that vmci_host_poll() always reads an initialized context. | ||||
| CVE-2023-54000 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: hns3: fix deadlock issue when externel_lb and reset are executed together When externel_lb and reset are executed together, a deadlock may occur: [ 3147.217009] INFO: task kworker/u321:0:7 blocked for more than 120 seconds. [ 3147.230483] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 3147.238999] task:kworker/u321:0 state:D stack: 0 pid: 7 ppid: 2 flags:0x00000008 [ 3147.248045] Workqueue: hclge hclge_service_task [hclge] [ 3147.253957] Call trace: [ 3147.257093] __switch_to+0x7c/0xbc [ 3147.261183] __schedule+0x338/0x6f0 [ 3147.265357] schedule+0x50/0xe0 [ 3147.269185] schedule_preempt_disabled+0x18/0x24 [ 3147.274488] __mutex_lock.constprop.0+0x1d4/0x5dc [ 3147.279880] __mutex_lock_slowpath+0x1c/0x30 [ 3147.284839] mutex_lock+0x50/0x60 [ 3147.288841] rtnl_lock+0x20/0x2c [ 3147.292759] hclge_reset_prepare+0x68/0x90 [hclge] [ 3147.298239] hclge_reset_subtask+0x88/0xe0 [hclge] [ 3147.303718] hclge_reset_service_task+0x84/0x120 [hclge] [ 3147.309718] hclge_service_task+0x2c/0x70 [hclge] [ 3147.315109] process_one_work+0x1d0/0x490 [ 3147.319805] worker_thread+0x158/0x3d0 [ 3147.324240] kthread+0x108/0x13c [ 3147.328154] ret_from_fork+0x10/0x18 In externel_lb process, the hns3 driver call napi_disable() first, then the reset happen, then the restore process of the externel_lb will fail, and will not call napi_enable(). When doing externel_lb again, napi_disable() will be double call, cause a deadlock of rtnl_lock(). This patch use the HNS3_NIC_STATE_DOWN state to protect the calling of napi_disable() and napi_enable() in externel_lb process, just as the usage in ndo_stop() and ndo_start(). | ||||
| CVE-2023-54020 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: sf-pdma: pdma_desc memory leak fix Commit b2cc5c465c2c ("dmaengine: sf-pdma: Add multithread support for a DMA channel") changed sf_pdma_prep_dma_memcpy() to unconditionally allocate a new sf_pdma_desc each time it is called. The driver previously recycled descs, by checking the in_use flag, only allocating additional descs if the existing one was in use. This logic was removed in commit b2cc5c465c2c ("dmaengine: sf-pdma: Add multithread support for a DMA channel"), but sf_pdma_free_desc() was not changed to handle the new behaviour. As a result, each time sf_pdma_prep_dma_memcpy() is called, the previous descriptor is leaked, over time leading to memory starvation: unreferenced object 0xffffffe008447300 (size 192): comm "irq/39-mchp_dsc", pid 343, jiffies 4294906910 (age 981.200s) hex dump (first 32 bytes): 00 00 00 ff 00 00 00 00 b8 c1 00 00 00 00 00 00 ................ 00 00 70 08 10 00 00 00 00 00 00 c0 00 00 00 00 ..p............. backtrace: [<00000000064a04f4>] kmemleak_alloc+0x1e/0x28 [<00000000018927a7>] kmem_cache_alloc+0x11e/0x178 [<000000002aea8d16>] sf_pdma_prep_dma_memcpy+0x40/0x112 Add the missing kfree() to sf_pdma_free_desc(), and remove the redundant in_use flag. | ||||
| CVE-2023-54024 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: Destroy target device if coalesced MMIO unregistration fails Destroy and free the target coalesced MMIO device if unregistering said device fails. As clearly noted in the code, kvm_io_bus_unregister_dev() does not destroy the target device. BUG: memory leak unreferenced object 0xffff888112a54880 (size 64): comm "syz-executor.2", pid 5258, jiffies 4297861402 (age 14.129s) hex dump (first 32 bytes): 38 c7 67 15 00 c9 ff ff 38 c7 67 15 00 c9 ff ff 8.g.....8.g..... e0 c7 e1 83 ff ff ff ff 00 30 67 15 00 c9 ff ff .........0g..... backtrace: [<0000000006995a8a>] kmalloc include/linux/slab.h:556 [inline] [<0000000006995a8a>] kzalloc include/linux/slab.h:690 [inline] [<0000000006995a8a>] kvm_vm_ioctl_register_coalesced_mmio+0x8e/0x3d0 arch/x86/kvm/../../../virt/kvm/coalesced_mmio.c:150 [<00000000022550c2>] kvm_vm_ioctl+0x47d/0x1600 arch/x86/kvm/../../../virt/kvm/kvm_main.c:3323 [<000000008a75102f>] vfs_ioctl fs/ioctl.c:46 [inline] [<000000008a75102f>] file_ioctl fs/ioctl.c:509 [inline] [<000000008a75102f>] do_vfs_ioctl+0xbab/0x1160 fs/ioctl.c:696 [<0000000080e3f669>] ksys_ioctl+0x76/0xa0 fs/ioctl.c:713 [<0000000059ef4888>] __do_sys_ioctl fs/ioctl.c:720 [inline] [<0000000059ef4888>] __se_sys_ioctl fs/ioctl.c:718 [inline] [<0000000059ef4888>] __x64_sys_ioctl+0x6f/0xb0 fs/ioctl.c:718 [<000000006444fa05>] do_syscall_64+0x9f/0x4e0 arch/x86/entry/common.c:290 [<000000009a4ed50b>] entry_SYSCALL_64_after_hwframe+0x49/0xbe BUG: leak checking failed | ||||
| CVE-2023-54044 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: spmi: Add a check for remove callback when removing a SPMI driver When removing a SPMI driver, there can be a crash due to NULL pointer dereference if it does not have a remove callback defined. This is one such call trace observed when removing the QCOM SPMI PMIC driver: dump_backtrace.cfi_jt+0x0/0x8 dump_stack_lvl+0xd8/0x16c panic+0x188/0x498 __cfi_slowpath+0x0/0x214 __cfi_slowpath+0x1dc/0x214 spmi_drv_remove+0x16c/0x1e0 device_release_driver_internal+0x468/0x79c driver_detach+0x11c/0x1a0 bus_remove_driver+0xc4/0x124 driver_unregister+0x58/0x84 cleanup_module+0x1c/0xc24 [qcom_spmi_pmic] __do_sys_delete_module+0x3ec/0x53c __arm64_sys_delete_module+0x18/0x28 el0_svc_common+0xdc/0x294 el0_svc+0x38/0x9c el0_sync_handler+0x8c/0xf0 el0_sync+0x1b4/0x1c0 If a driver has all its resources allocated through devm_() APIs and does not need any other explicit cleanup, it would not require a remove callback to be defined. Hence, add a check for remove callback presence before calling it when removing a SPMI driver. | ||||
| CVE-2023-54089 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: virtio_pmem: add the missing REQ_OP_WRITE for flush bio When doing mkfs.xfs on a pmem device, the following warning was ------------[ cut here ]------------ WARNING: CPU: 2 PID: 384 at block/blk-core.c:751 submit_bio_noacct Modules linked in: CPU: 2 PID: 384 Comm: mkfs.xfs Not tainted 6.4.0-rc7+ #154 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) RIP: 0010:submit_bio_noacct+0x340/0x520 ...... Call Trace: <TASK> ? submit_bio_noacct+0xd5/0x520 submit_bio+0x37/0x60 async_pmem_flush+0x79/0xa0 nvdimm_flush+0x17/0x40 pmem_submit_bio+0x370/0x390 __submit_bio+0xbc/0x190 submit_bio_noacct_nocheck+0x14d/0x370 submit_bio_noacct+0x1ef/0x520 submit_bio+0x55/0x60 submit_bio_wait+0x5a/0xc0 blkdev_issue_flush+0x44/0x60 The root cause is that submit_bio_noacct() needs bio_op() is either WRITE or ZONE_APPEND for flush bio and async_pmem_flush() doesn't assign REQ_OP_WRITE when allocating flush bio, so submit_bio_noacct just fail the flush bio. Simply fix it by adding the missing REQ_OP_WRITE for flush bio. And we could fix the flush order issue and do flush optimization later. | ||||
| CVE-2023-54081 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xen: speed up grant-table reclaim When a grant entry is still in use by the remote domain, Linux must put it on a deferred list. Normally, this list is very short, because the PV network and block protocols expect the backend to unmap the grant first. However, Qubes OS's GUI protocol is subject to the constraints of the X Window System, and as such winds up with the frontend unmapping the window first. As a result, the list can grow very large, resulting in a massive memory leak and eventual VM freeze. To partially solve this problem, make the number of entries that the VM will attempt to free at each iteration tunable. The default is still 10, but it can be overridden via a module parameter. This is Cc: stable because (when combined with appropriate userspace changes) it fixes a severe performance and stability problem for Qubes OS users. | ||||